A vulnerability was found in Sricam IP CCTV Camera and classified as critical. This issue affects some unknown processing of the component Device Viewer. The manipulation leads to memory corruption. An attack has to be approached locally. The exploit has been disclosed to the public and may be used.

Sricam DeviceViewer 3.12.0.1 contains a local buffer overflow vulnerability in the user management add user function that allows authenticated attackers to execute arbitrary code by bypassing data execution prevention. Attackers can inject a malicious payload through the Username field in User Management to trigger a stack-based buffer overflow and execute commands via ROP chain gadgets.

H3C B5 Mini B5MiniV100R005 was discovered to contain a stack overflow via the function SetAPWifiorLedInfoById.

H3C B5 Mini B5MiniV100R005 was discovered to contain a stack overflow via the function EditMacList.d.

H3C Magic NX18 Plus NX18PV100R003 was discovered to contain a stack overflow via the function SetMacAccessMode.

In the Linux kernel, the following vulnerability has been resolved: ice: fix memory corruption bug with suspend and rebuild The ice driver would previously panic after suspend. This is caused from the driver *only* calling the ice_vsi_free_q_vectors() function by itself, when it is suspending. Since commit b3e7b3a6ee92 ("ice: prevent NULL pointer deref during reload") the driver has zeroed out num_q_vectors, and only restored it in ice_vsi_cfg_def(). This further causes the ice_rebuild() function to allocate a zero length buffer, after which num_q_vectors is updated, and then the new value of num_q_vectors is used to index into the zero length buffer, which corrupts memory. The fix entails making sure all the code referencing num_q_vectors only does so after it has been reset via ice_vsi_cfg_def(). I didn't perform a full bisect, but I was able to test against 6.1.77 kernel and that ice driver works fine for suspend/resume with no panic, so sometime since then, this problem was introduced. Also clean up an un-needed init of a local variable in the function being modified. PANIC from 6.8.0-rc1: [1026674.915596] PM: suspend exit [1026675.664697] ice 0000:17:00.1: PTP reset successful [1026675.664707] ice 0000:17:00.1: 2755 msecs passed between update to cached PHC time [1026675.667660] ice 0000:b1:00.0: PTP reset successful [1026675.675944] ice 0000:b1:00.0: 2832 msecs passed between update to cached PHC time [1026677.137733] ixgbe 0000:31:00.0 ens787: NIC Link is Up 1 Gbps, Flow Control: None [1026677.190201] BUG: kernel NULL pointer dereference, address: 0000000000000010 [1026677.192753] ice 0000:17:00.0: PTP reset successful [1026677.192764] ice 0000:17:00.0: 4548 msecs passed between update to cached PHC time [1026677.197928] #PF: supervisor read access in kernel mode [1026677.197933] #PF: error_code(0x0000) - not-present page [1026677.197937] PGD 1557a7067 P4D 0 [1026677.212133] ice 0000:b1:00.1: PTP reset successful [1026677.212143] ice 0000:b1:00.1: 4344 msecs passed between update to cached PHC time [1026677.212575] [1026677.243142] Oops: 0000 [#1] PREEMPT SMP NOPTI [1026677.247918] CPU: 23 PID: 42790 Comm: kworker/23:0 Kdump: loaded Tainted: G W 6.8.0-rc1+ #1 [1026677.257989] Hardware name: Intel Corporation M50CYP2SBSTD/M50CYP2SBSTD, BIOS SE5C620.86B.01.01.0005.2202160810 02/16/2022 [1026677.269367] Workqueue: ice ice_service_task [ice] [1026677.274592] RIP: 0010:ice_vsi_rebuild_set_coalesce+0x130/0x1e0 [ice] [1026677.281421] Code: 0f 84 3a ff ff ff 41 0f b7 74 ec 02 66 89 b0 22 02 00 00 81 e6 ff 1f 00 00 e8 ec fd ff ff e9 35 ff ff ff 48 8b 43 30 49 63 ed <41> 0f b7 34 24 41 83 c5 01 48 8b 3c e8 66 89 b7 aa 02 00 00 81 e6 [1026677.300877] RSP: 0018:ff3be62a6399bcc0 EFLAGS: 00010202 [1026677.306556] RAX: ff28691e28980828 RBX: ff28691e41099828 RCX: 0000000000188000 [1026677.314148] RDX: 0000000000000000 RSI: 0000000000000010 RDI: ff28691e41099828 [1026677.321730] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [1026677.329311] R10: 0000000000000007 R11: ffffffffffffffc0 R12: 0000000000000010 [1026677.336896] R13: 0000000000000000 R14: 0000000000000000 R15: ff28691e0eaa81a0 [1026677.344472] FS: 0000000000000000(0000) GS:ff28693cbffc0000(0000) knlGS:0000000000000000 [1026677.353000] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1026677.359195] CR2: 0000000000000010 CR3: 0000000128df4001 CR4: 0000000000771ef0 [1026677.366779] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [1026677.374369] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [1026677.381952] PKRU: 55555554 [1026677.385116] Call Trace: [1026677.388023] <TASK> [1026677.390589] ? __die+0x20/0x70 [1026677.394105] ? page_fault_oops+0x82/0x160 [1026677.398576] ? do_user_addr_fault+0x65/0x6a0 [1026677.403307] ? exc_page_fault+0x6a/0x150 [1026677.407694] ? asm_exc_page_fault+0x22/0x30 [1026677.412349] ? ice_vsi_rebuild_set_coalesce+0x130/0x1e0 [ice] [1026677.4186 ---truncated---

H3C B5 Mini B5MiniV100R005 was discovered to contain a stack overflow via the function Edit_BasicSSID_5G.

H3C Magic NX18 Plus NX18PV100R003 was discovered to contain a stack overflow via the function Edit_BasicSSID.

Buffer overflow in the niu_get_ethtool_tcam_all function in drivers/net/niu.c in the Linux kernel before 2.6.36-rc4 allows local users to cause a denial of service or possibly have unspecified other impact via the ETHTOOL_GRXCLSRLALL ethtool command.

A security flaw has been discovered in admesh up to 0.98.5. This issue affects the function stl_check_normal_vector of the file src/normals.c. Performing a manipulation results in heap-based buffer overflow. The attack must be initiated from a local position. The exploit has been released to the public and may be used for attacks. It looks like this product is not really maintained anymore.

Buffer overflow in Ruby 1.9.x before 1.9.1-p429 on Windows might allow local users to gain privileges via a crafted ARGF.inplace_mode value that is not properly handled when constructing the filenames of the backup files.

MUNGE is an authentication service for creating and validating user credentials. From 0.5 to 0.5.17, local attacker can exploit a buffer overflow vulnerability in munged (the MUNGE authentication daemon) to leak cryptographic key material from process memory. With the leaked key material, the attacker could forge arbitrary MUNGE credentials to impersonate any user (including root) to services that rely on MUNGE for authentication. The vulnerability allows a buffer overflow by sending a crafted message with an oversized address length field, corrupting munged's internal state and enabling extraction of the MAC subkey used for credential verification. This vulnerability is fixed in 0.5.18.

The compat_alloc_user_space functions in include/asm/compat.h files in the Linux kernel before 2.6.36-rc4-git2 on 64-bit platforms do not properly allocate the userspace memory required for the 32-bit compatibility layer, which allows local users to gain privileges by leveraging the ability of the compat_mc_getsockopt function (aka the MCAST_MSFILTER getsockopt support) to control a certain length value, related to a "stack pointer underflow" issue, as exploited in the wild in September 2010.

EDK2 is susceptible to a vulnerability in the Tcg2MeasurePeImage() function, allowing a user to trigger a heap buffer overflow via a local network. Successful exploitation of this vulnerability may result in a compromise of confidentiality, integrity, and/or availability.

H3C Magic NX18 Plus NX18PV100R003 was discovered to contain a stack overflow via the function UpdateSnat.

H3C Magic NX18 Plus NX18PV100R003 was discovered to contain a stack overflow via the function EditWlanMacList.

Multiple stack-based buffer overflows in (1) mod_alias and (2) mod_rewrite for Apache before 1.3.29 allow attackers to create configuration files to cause a denial of service (crash) or execute arbitrary code via a regular expression with more than 9 captures.

A vulnerability was determined in Squirrel up to 3.2. Affected by this vulnerability is the function SQFuncState::PopTarget of the file src/squirrel/squirrel/sqfuncstate.cpp. Executing a manipulation of the argument _target_stack can lead to out-of-bounds read. It is possible to launch the attack on the local host. The exploit has been publicly disclosed and may be utilized. The project was informed of the problem early through an issue report but has not responded yet.

H3C B5 Mini B5MiniV100R005 was discovered to contain a stack overflow via the function SetAP5GWifiById.

H3C Magic NX18 Plus NX18PV100R003 was discovered to contain a stack overflow via the function EDitusergroup.

H3C Magic NX18 Plus NX18PV100R003 was discovered to contain a stack overflow via the function EditMacList.

H3C Magic NX18 Plus NX18PV100R003 was discovered to contain a stack overflow via the function UpdateWanParams.

H3C Magic NX18 Plus NX18PV100R003 was discovered to contain a stack overflow via the function EnableIpv6.

Exim 4 before 4.94.2 allows Heap-based Buffer Overflow because it mishandles "-F '.('" on the command line, and thus may allow privilege escalation from any user to root. This occurs because of the interpretation of negative sizes in strncpy.

A heap-based overflow vulnerability in PrepareRecogLibrary_Part function in libSDKRecognitionText.spensdk.samsung.so library prior to SMR Sep-2022 Release 1 allows attacker to cause memory access fault.

TOTOLINK N350RT V9.3.5u.6139_B20201216 was discovered to contain a stack overflow via the command parameter in the function setTracerouteCfg.

An issue was discovered in Xen through 4.14.x allowing x86 PV guest OS users to gain guest OS privileges by modifying kernel memory contents, because invalidation of TLB entries is mishandled during use of an INVLPG-like attack technique.

A security flaw has been discovered in Squirrel up to 3.2. This affects the function SQObjectPtr::operator in the library squirrel/sqobject.h. The manipulation results in heap-based buffer overflow. The attack needs to be approached locally. The exploit has been released to the public and may be used for attacks. The project was informed of the problem early through an issue report but has not responded yet.

A heap-based overflow vulnerability in GetCorrectDbLanguageTypeEsPKc function in libSDKRecognitionText.spensdk.samsung.so library prior to SMR Sep-2022 Release 1 allows attacker to cause memory access fault.

H3C B5 Mini B5MiniV100R005 was discovered to contain a stack overflow via the function SetMacAccessMode.

The shared memory manager (associated with pre-authentication compression) in sshd in OpenSSH before 7.4 does not ensure that a bounds check is enforced by all compilers, which might allows local users to gain privileges by leveraging access to a sandboxed privilege-separation process, related to the m_zback and m_zlib data structures.

A heap-based overflow vulnerability in ConstructDictionary function in libSDKRecognitionText.spensdk.samsung.so library prior to SMR Sep-2022 Release 1 allows attacker to cause memory access fault.

An issue was discovered on Samsung mobile devices with P(9.0) and Q(10.0) (Exynos 980, 9820, and 9830 chipsets) software. The NPU driver allows attackers to execute arbitrary code because of unintended write and read operations on memory. The Samsung ID is SVE-2020-18610 (November 2020).

H3C B5 Mini B5MiniV100R005 was discovered to contain a stack overflow via the function Edit_BasicSSID.

Buffer overflow in the usb_host_handle_control function in the USB passthrough handling implementation in usb-linux.c in QEMU before 0.11.1 allows guest OS users to cause a denial of service (guest OS crash or hang) or possibly execute arbitrary code on the host OS via a crafted USB packet.

A heap-based overflow vulnerability in MHW_RECOG_LIB_INFO function in libSDKRecognitionText.spensdk.samsung.so library prior to SMR Sep-2022 Release 1 allows attacker to cause memory access fault.

H3C Magic NX18 Plus NX18PV100R003 was discovered to contain a stack overflow via the function Edit_BasicSSID_5G.

EDK2 is susceptible to a vulnerability in the Tcg2MeasureGptTable() function, allowing a user to trigger a heap buffer overflow via a local network. Successful exploitation of this vulnerability may result in a compromise of confidentiality, integrity, and/or availability.

A heap-based overflow vulnerability in LoadEnvironment function in libSDKRecognitionText.spensdk.samsung.so library prior to SMR Sep-2022 Release 1 allows attacker to cause memory access fault.

TOTOLINK A3700R V9.1.2u.6134_B20201202 was discovered to contain a stack overflow via the sPort parameter in the function setIpPortFilterRules.

H3C Magic NX18 Plus NX18PV100R003 was discovered to contain a stack overflow via the function addactionlist.

H3C Magic NX18 Plus NX18PV100R003 was discovered to contain a stack overflow via the function AddWlanMacList.

A vulnerability, which was classified as critical, was found in Linux Kernel. This affects the function __mtk_ppe_check_skb of the file drivers/net/ethernet/mediatek/mtk_ppe.c of the component Ethernet Handler. The manipulation leads to use after free. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-211935.

A heap-based overflow vulnerability in GetCorrectDbLanguageTypeEsPKc() function in libSDKRecognitionText.spensdk.samsung.so library prior to SMR Sep-2022 Release 1 allows attacker to cause memory access fault.

Exim 4 before 4.94.2 allows Out-of-bounds Write because the main function, while setuid root, copies the current working directory pathname into a buffer that is too small (on some common platforms).

H3C Magic NX18 Plus NX18PV100R003 was discovered to contain a stack overflow via the function SetMobileAPInfoById.

A heap-based overflow vulnerability in prepareRecogLibrary function in libSDKRecognitionText.spensdk.samsung.so library prior to SMR Sep-2022 Release 1 allows attacker to cause memory access fault.

H3C Magic NX18 Plus NX18PV100R003 was discovered to contain a stack overflow via the function UpdateMacClone.

H3C Magic NX18 Plus NX18PV100R003 was discovered to contain a stack overflow via the function SetAPWifiorLedInfoById.

In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Apply the link chain quirk on NEC isoc endpoints Two clearly different specimens of NEC uPD720200 (one with start/stop bug, one without) were seen to cause IOMMU faults after some Missed Service Errors. Faulting address is immediately after a transfer ring segment and patched dynamic debug messages revealed that the MSE was received when waiting for a TD near the end of that segment: [ 1.041954] xhci_hcd: Miss service interval error for slot 1 ep 2 expected TD DMA ffa08fe0 [ 1.042120] xhci_hcd: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0005 address=0xffa09000 flags=0x0000] [ 1.042146] xhci_hcd: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0005 address=0xffa09040 flags=0x0000] It gets even funnier if the next page is a ring segment accessible to the HC. Below, it reports MSE in segment at ff1e8000, plows through a zero-filled page at ff1e9000 and starts reporting events for TRBs in page at ff1ea000 every microframe, instead of jumping to seg ff1e6000. [ 7.041671] xhci_hcd: Miss service interval error for slot 1 ep 2 expected TD DMA ff1e8fe0 [ 7.041999] xhci_hcd: Miss service interval error for slot 1 ep 2 expected TD DMA ff1e8fe0 [ 7.042011] xhci_hcd: WARN: buffer overrun event for slot 1 ep 2 on endpoint [ 7.042028] xhci_hcd: All TDs skipped for slot 1 ep 2. Clear skip flag. [ 7.042134] xhci_hcd: WARN: buffer overrun event for slot 1 ep 2 on endpoint [ 7.042138] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 31 [ 7.042144] xhci_hcd: Looking for event-dma 00000000ff1ea040 trb-start 00000000ff1e6820 trb-end 00000000ff1e6820 [ 7.042259] xhci_hcd: WARN: buffer overrun event for slot 1 ep 2 on endpoint [ 7.042262] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 31 [ 7.042266] xhci_hcd: Looking for event-dma 00000000ff1ea050 trb-start 00000000ff1e6820 trb-end 00000000ff1e6820 At some point completion events change from Isoch Buffer Overrun to Short Packet and the HC finally finds cycle bit mismatch in ff1ec000. [ 7.098130] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 13 [ 7.098132] xhci_hcd: Looking for event-dma 00000000ff1ecc50 trb-start 00000000ff1e6820 trb-end 00000000ff1e6820 [ 7.098254] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 13 [ 7.098256] xhci_hcd: Looking for event-dma 00000000ff1ecc60 trb-start 00000000ff1e6820 trb-end 00000000ff1e6820 [ 7.098379] xhci_hcd: Overrun event on slot 1 ep 2 It's possible that data from the isochronous device were written to random buffers of pending TDs on other endpoints (either IN or OUT), other devices or even other HCs in the same IOMMU domain. Lastly, an error from a different USB device on another HC. Was it caused by the above? I don't know, but it may have been. The disk was working without any other issues and generated PCIe traffic to starve the NEC of upstream BW and trigger those MSEs. The two HCs shared one x1 slot by means of a commercial "PCIe splitter" board. [ 7.162604] usb 10-2: reset SuperSpeed USB device number 3 using xhci_hcd [ 7.178990] sd 9:0:0:0: [sdb] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 driverbyte=DRIVER_OK cmd_age=0s [ 7.179001] sd 9:0:0:0: [sdb] tag#0 CDB: opcode=0x28 28 00 04 02 ae 00 00 02 00 00 [ 7.179004] I/O error, dev sdb, sector 67284480 op 0x0:(READ) flags 0x80700 phys_seg 5 prio class 0 Fortunately, it appears that this ridiculous bug is avoided by setting the chain bit of Link TRBs on isochronous rings. Other ancient HCs are known which also expect the bit to be set and they ignore Link TRBs if it's not. Reportedly, 0.95 spec guaranteed that the bit is set. The bandwidth-starved NEC HC running a 32KB/uframe UVC endpoint reports tens of MSEs per second and runs into the bug within seconds. Chaining Link TRBs allows the same workload to run for many minutes, many times. No ne ---truncated---