The user access rights validation in the web server of the Bosch Ethernet switch PRA-ES8P2S with software version 1.01.05 was insufficient. This would allow a non-administrator user to obtain administrator user access rights.

Improper Privilege Management in GitHub repository octoprint/octoprint prior to 1.8.3.

An issue was discovered in ThingsBoard 3.4.1, allows low privileged attackers (CUSTOMER_USER) to gain escalated privileges (vertically) and become an Administrator (TENANT_ADMIN) or (SYS_ADMIN) on the web application. It is important to note that in order to accomplish this, the attacker must know the corresponding API's parameter (authority : value).

Brocade Webtools in Brocade Fabric OS versions before Brocade Fabric OS versions v9.1.1, v9.0.1e, and v8.2.3c could allow a low privilege webtools, user, to gain elevated admin rights, or privileges, beyond what is intended or entitled for that user. By exploiting this vulnerability, a user whose role is not an admin can create a new user with an admin role using the operator session id. The issue was replicated after intercepting the admin, and operator authorization headers sent unencrypted and editing a user addition request to use the operator's authorization header.

In Phoenix Contact FL SWITCH Series 2xxx in version 3.00 an incorrect privilege assignment allows an low privileged user to enable full access to the device configuration.

A vulnerability, which was classified as critical, was found in MONyog Ultimate 6.63. This affects an unknown part of the component Cookie Handler. The manipulation of the argument HasServerEdit/IsAdmin leads to privilege escalation. It is possible to initiate the attack remotely.

The Elegant Themes Monarch plugin before 1.2.7 for WordPress has privilege escalation.

The peepso-core plugin before 1.6.1 for WordPress has PeepSoProfilePreferencesAjax->save() privilege escalation.

Incorrect Privilege Assignment vulnerability in Hitachi Hitachi Storage Plug-in for VMware vCenter allows remote authenticated users to cause privilege escalation.This issue affects Hitachi Storage Plug-in for VMware vCenter: from 04.8.0 before 04.9.0.

Improper Privilege Management vulnerability in Dylan James Zephyr Project Manager allows Privilege Escalation.This issue affects Zephyr Project Manager: from n/a through 3.3.97.

The Elegant Themes Bloom plugin before 1.1.1 for WordPress has privilege escalation.

The HM Multiple Roles WordPress plugin before 1.3 does not have any access control to prevent low privilege users to set themselves as admin via their profile page

There is functionality in the Store Locator Plus for WordPress plugin through 5.5.14 that made it possible for authenticated users to update their user meta data to become an administrator on any site using the plugin.

MinIO is a High Performance Object Storage released under GNU Affero General Public License v3.0. A security issue was found where an non-admin user is able to create service accounts for root or other admin users and then is able to assume their access policies via the generated credentials. This in turn allows the user to escalate privilege to that of the root user. This vulnerability has been resolved in pull request #14729 and is included in `RELEASE.2022-04-12T06-55-35Z`. Users unable to upgrade may workaround this issue by explicitly adding a `admin:CreateServiceAccount` deny policy, however, this, in turn, denies the user the ability to create their own service accounts as well.

A remote escalation of privilege vulnerability was discovered in Aruba Airwave Software version(s): Prior to 1.3.2.

A flaw exists in VASA which allows users with access to a vSphere/ESXi VMware admin on a FlashArray to gain root access through privilege escalation.

The WPGYM - Wordpress Gym Management System plugin for WordPress is vulnerable to unauthorized admin account creation in all versions up to, and including, 67.7.0. This is due to the plugin not properly validating a user's capabilities prior to adding users. This makes it possible for authenticated attackers, with Subscriber-level access and above, to create new users, including admins.

An issue in NCR Atleos Terminal Manager (ConfigApp) v3.4.0 allows attackers to escalate privileges via a crafted request.

Qlik Sense Enterprise for Windows before 14.187.4 allows a remote attacker to elevate their privilege due to improper validation. The attacker can elevate their privilege to the internal system role, which allows them to execute commands on the server. This affects February 2024 Patch 3 (14.173.3 through 14.173.7), November 2023 Patch 8 (14.159.4 through 14.159.13), August 2023 Patch 13 (14.139.3 through 14.139.20), May 2023 Patch 15 (14.129.3 through 14.129.22), February 2023 Patch 13 (14.113.1 through 14.113.18), November 2022 Patch 13 (14.97.2 through 14.97.18), August 2022 Patch 16 (14.78.3 through 14.78.23), and May 2022 Patch 17 (14.67.7 through 14.67.31). This has been fixed in May 2024 (14.187.4), February 2024 Patch 4 (14.173.8), November 2023 Patch 9 (14.159.14), August 2023 Patch 14 (14.139.21), May 2023 Patch 16 (14.129.23), February 2023 Patch 14 (14.113.19), November 2022 Patch 14 (14.97.19), August 2022 Patch 17 (14.78.25), and May 2022 Patch 18 (14.67.34).

In Cloudera Hue, there is privilege escalation by a read-only user when CDH 5.x brefore 5.4.9 is used.

x26-Cogs is a repository of cogs made by Twentysix for the Red Discord bot. Among these cogs is the Defender cog, a tool for Discord server moderation. A vulnerability in the Defender cog prior to version 1.10.0 allows users with admin privileges to issue commands as other users who share the same server. If a bot owner shares the same server as the attacker, it is possible for the attacker to issue bot-owner restricted commands. The issue has been patched in version 1.10.0. One may unload the Defender cog as a workaround.

Elevation of privilege

Improper Privilege Management vulnerability in Membership Software WishList Member X allows Privilege Escalation.This issue affects WishList Member X: from n/a before 3.26.7.

Privilege escalation vulnerability in McAfee Web Gateway (MWG) prior to 9.2.8 allows an authenticated user to gain elevated privileges through the User Interface and execute commands on the appliance via incorrect improper neutralization of user input in the troubleshooting page.

Azure PlayFab Elevation of Privilege Vulnerability

The Dokan Pro plugin for WordPress is vulnerable to privilege escalation via account takeover in all versions up to, and including, 4.0.5. This is due to the plugin not properly validating a user's identity prior to updating their password during a staff password reset. This makes it possible for authenticated attackers, with vendor-level access and above, to elevate their privilege to the level of a staff member and then change arbitrary user passwords, including those of administrators in order to gain access to their accounts. By default, the plugin allows customers to become vendors.

The WPC Admin Columns plugin for WordPress is vulnerable to privilege escalation in versions 2.0.6 to 2.1.0. This is due to the plugin not properly restricting user meta values that can be updated through the ajax_edit_save() function. This makes it possible for authenticated attackers, with Subscriber-level access and above, to update their role to that of an administrator.

A vulnerability in the web services interface for remote access VPN features of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, but unprivileged, remote attacker to elevate privileges to level 15. This vulnerability is due to improper separation of authentication and authorization scopes. An attacker could exploit this vulnerability by sending crafted HTTPS messages to the web services interface of an affected device. A successful exploit could allow the attacker to gain privilege level 15 access to the web management interface of the device. This includes privilege level 15 access to the device using management tools like the Cisco Adaptive Security Device Manager (ASDM) or the Cisco Security Manager (CSM). Note: With Cisco FTD Software, the impact is lower than the CVSS score suggests because the affected web management interface allows for read access only.

A vulnerability in an API endpoint of Cisco Application Policy Infrastructure Controller (APIC) and Cisco Cloud Application Policy Infrastructure Controller (Cloud APIC) could allow an authenticated, remote attacker with Administrator read-only credentials to elevate privileges on an affected system. This vulnerability is due to an insufficient role-based access control (RBAC). An attacker with Administrator read-only credentials could exploit this vulnerability by sending a specific API request using an app with admin write credentials. A successful exploit could allow the attacker to elevate privileges to Administrator with write privileges on the affected device.

Multiple vulnerabilities in the web-based management interface of certain Cisco Small Business 100, 300, and 500 Series Wireless Access Points could allow an authenticated, remote attacker to obtain sensitive information from or inject arbitrary commands on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

System Center Operations Manager Elevation of Privilege Vulnerability

Langflow is a tool for building and deploying AI-powered agents and workflows. A privilege escalation vulnerability exists in Langflow containers where an authenticated user with RCE access can invoke the internal CLI command langflow superuser to create a new administrative user. This results in full superuser access, even if the user initially registered through the UI as a regular (non-admin) account. A patched version has not been made public at this time.

An issue in the component IOMap64.sys of ASUSTeK Computer Inc ASUS GPU TweakII v1.4.5.2 allows attackers to escalate privileges and execute arbitrary code via sending crafted IOCTL requests.

Windows LUAFV Elevation of Privilege Vulnerability

Multiple vulnerabilities in the web-based management interface of certain Cisco Small Business 100, 300, and 500 Series Wireless Access Points could allow an authenticated, remote attacker to obtain sensitive information from or inject arbitrary commands on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Improper Privilege Management vulnerability in AA-Team WZone allows Privilege Escalation.This issue affects WZone: from n/a through 14.0.10.

Acer ControlCenter contains Remote Code Execution vulnerability. The program exposes a Windows Named Pipe that uses a custom protocol to invoke internal functions. However, this Named Pipe is misconfigured, allowing remote users with low privileges to interact with it and access its features. One such feature enables the execution of arbitrary programs as NT AUTHORITY/SYSTEM. By leveraging this, remote attackers can execute arbitrary code on the target system with elevated privileges.

API Privilege Escalation in GitHub repository alextselegidis/easyappointments prior to 1.5.0. Full system takeover.

The WPLMS theme for WordPress is vulnerable to Privilege Escalation in versions 1.5.2 to 1.8.4.1 via the 'wp_ajax_import_data' AJAX action. This makes it possible for authenticated attackers to change otherwise restricted settings and potentially create a new accessible admin account.

Improper Privilege Management vulnerability in Hamid Alinia – idehweb Login with phone number allows Privilege Escalation.This issue affects Login with phone number: from n/a through 1.7.16.

An issue found in Ofcms v.1.1.4 allows a remote attacker to to escalate privileges via the respwd method in SysUserController.

ZoneAlarm Firewall and Antivirus products before version 15.8.109.18436 allow an attacker who already has access to the system to execute code at elevated privileges through a combination of file permission manipulation and exploitation of Windows CVE-2020-00896 on unpatched systems.

Pivotal Operations Manager, versions 2.0.x prior to 2.0.24, versions 2.1.x prior to 2.1.15, versions 2.2.x prior to 2.2.7, and versions 2.3.x prior to 2.3.1, grants all users a scope which allows for privilege escalation. A remote malicious user who has been authenticated may create a new client with administrator privileges for Opsman.

Citrix ADC and Citrix Gateway 13.0 before 13.0-64.35, Citrix ADC and NetScaler Gateway 12.1 before 12.1-58.15, Citrix ADC 12.1-FIPS before 12.1-55.187, Citrix ADC and NetScaler Gateway 12.0, Citrix ADC and NetScaler Gateway 11.1 before 11.1-65.12, Citrix SD-WAN WANOP 11.2 before 11.2.1a, Citrix SD-WAN WANOP 11.1 before 11.1.2a, Citrix SD-WAN WANOP 11.0 before 11.0.3f, Citrix SD-WAN WANOP 10.2 before 10.2.7b are vulnerable to escalation of privileges on the management interface.

IBM Security Guardium Insights 2.0.1 performs an operation at a privilege level that is higher than the minimum level required, which creates new weaknesses or amplifies the consequences of other weaknesses. IBM X-Force ID: 184880.

Yubico ykman-gui (aka YubiKey Manager GUI) before 1.2.6 on Windows, when Edge is not used, allows privilege escalation because browser windows can open as Administrator.

An authorised user on a Windows host running Citrix Universal Print Server can perform arbitrary command execution as SYSTEM in CVAD versions before 2009, 1912 LTSR CU1 hotfixes CTX285870 and CTX286120, 7.15 LTSR CU6 hotfix CTX285344 and 7.6 LTSR CU9.

An unprivileged Windows user on the VDA can perform arbitrary command execution as SYSTEM in CVAD versions before 2009, 1912 LTSR CU1 hotfixes CTX285870 and CTX286120, 7.15 LTSR CU6 hotfix CTX285344 and 7.6 LTSR CU9

The fix for CVE-2020-7009 was found to be incomplete. Elasticsearch versions from 6.7.0 to 6.8.7 and 7.0.0 to 7.6.1 contain a privilege escalation flaw if an attacker is able to create API keys and also authentication tokens. An attacker who is able to generate an API key and an authentication token can perform a series of steps that result in an authentication token being generated with elevated privileges.

In Octopus Deploy versions 3.2.11 - 4.1.5 (fixed in 4.1.6), an authenticated user with ProcessEdit permission could reference an Azure account in such a way as to bypass the scoping restrictions, resulting in a potential escalation of privileges.