FaceSentry Access Control System 6.4.8 contains a critical authentication vulnerability with hard-coded SSH credentials for the wwwuser account. Attackers can leverage the insecure sudoers configuration to escalate privileges and gain root access by executing sudo commands without authentication.

ASG technologies ( A Rocket Software Company) ASG-Zena Cross Platform Server Enterprise Edition 4.2.1 is vulnerable to Cleartext Storage of Sensitive Information in a Cookie.

Netgear Nighthawk R6700 version 1.0.4.120 stores sensitive information in plaintext. All usernames and passwords for the device's associated services are stored in plaintext on the device. For example, the admin password is stored in plaintext in the primary configuration file on the device.

FUXA is a web-based Process Visualization (SCADA/HMI/Dashboard) software. An information disclosure vulnerability in FUXA allows an unauthenticated, remote attacker to retrieve sensitive administrative database credentials. Exploitation allows an unauthenticated, remote attacker to obtain the full system configuration, including administrative credentials for the InfluxDB database. Possession of these credentials may allow an attacker to authenticate directly to the database service, enabling them to read, modify, or delete all historical process data, or perform a Denial of Service by corrupting the database. This affects FUXA through version 1.2.9. This issue has been patched in FUXA version 1.2.10.

PrinterLogic Web Stack versions 19.1.1.13 SP9 and below are vulnerable to an Insecure Direct Object Reference (IDOR) vulnerability that allows an unauthenticated attacker to disclose the plaintext console username and password for a printer.

Unisys Cargo Mobile Application before 1.2.29 uses cleartext to store sensitive information, which might be revealed in a backup. The issue is addressed by ensuring that the allowBackup flag (in the manifest) is False.

Fujitsu Software Infrastructure Manager (ISM) stores sensitive information at the product's maintenance data (ismsnap) in cleartext form. As a result, the password for the proxy server that is configured in ISM may be retrieved. Affected products and versions are as follows: Fujitsu Software Infrastructure Manager Advanced Edition V2.8.0.060, Fujitsu Software Infrastructure Manager Advanced Edition for PRIMEFLEX V2.8.0.060, and Fujitsu Software Infrastructure Manager Essential Edition V2.8.0.060.

Tina is an open-source content management system (CMS). Sites building with Tina CMS's command line interface (CLI) prior to version 1.6.2 that use a search token may be vulnerable to the search token being leaked via lock file (tina-lock.json). Administrators of Tina-enabled websites with search setup should rotate their key immediately. This issue has been patched in @tinacms/cli version 1.6.2. Upgrading and rotating the search token is required for the proper fix.

A password mismanagement situation exists in XoruX LPAR2RRD and STOR2RRD before 7.30 because cleartext information is present in HTML password input fields in the device properties. (Viewing the passwords requires configuring a web browser to display HTML password input fields.)

Grafana Agent is a telemetry collector for sending metrics, logs, and trace data to the opinionated Grafana observability stack. Prior to versions 0.20.1 and 0.21.2, inline secrets defined within a metrics instance config are exposed in plaintext over two endpoints: metrics instance configs defined in the base YAML file are exposed at `/-/config` and metrics instance configs defined for the scraping service are exposed at `/agent/api/v1/configs/:key`. Inline secrets will be exposed to anyone being able to reach these endpoints. If HTTPS with client authentication is not configured, these endpoints are accessible to unauthenticated users. Secrets found in these sections are used for delivering metrics to a Prometheus Remote Write system, authenticating against a system for discovering Prometheus targets, and authenticating against a system for collecting metrics. This does not apply for non-inlined secrets, such as `*_file` based secrets. This issue is patched in Grafana Agent versions 0.20.1 and 0.21.2. A few workarounds are available. Users who cannot upgrade should use non-inline secrets where possible. Users may also desire to restrict API access to Grafana Agent with some combination of restricting the network interfaces Grafana Agent listens on through `http_listen_address` in the `server` block, configuring Grafana Agent to use HTTPS with client authentication, and/or using firewall rules to restrict external access to Grafana Agent's API.

Element55 KnowMore appliances version 21 and older was discovered to store passwords in plaintext.

IBM Datacap Navigator 9.1.5, 9.1.6, 9.1.7, 9.1.8, and 9.1.9 temporarily stores data from different environments that could be obtained by a malicious user. IBM X-Force ID: 295791.

Cisco Linksys E4200 1.0.05 Build 7 devices store passwords in cleartext allowing remote attackers to obtain sensitive information.

The vulnerability exists in BLUVOYIX due to an improper password storage implementation and subsequent exposure via unauthenticated APIs. An unauthenticated remote attacker could exploit this vulnerability by sending specially crafted HTTP requests to the vulnerable users API to retrieve the plaintext passwords of all user users. Successful exploitation of this vulnerability could allow the attacker to gain full access to customers' data and completely compromise the targeted platform by logging in using an exposed admin email address and password.

An issue was discovered on Moxa MGate MB3170 and MB3270 devices before 4.1, MB3280 and MB3480 devices before 3.1, MB3660 devices before 2.3, and MB3180 devices before 2.1. The application's configuration file contains parameters that represent passwords in cleartext.

A vulnerability was found in Intergard SGS 8.7.0. It has been classified as problematic. This affects an unknown part. The manipulation leads to cleartext storage of sensitive information in memory. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-234447. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Electrolink transmitters store credentials in clear-text. Use of these credentials could allow an attacker to access the system.

CVEProject/cve-services is an open source project used to operate the CVE services API. A conditional in 'data.js' has potential for production secrets to be written to disk. The affected method writes the generated randomKey to disk if the environment is not development. If this method were called in production, it is possible that it would write the plaintext key to disk. A patch is not available as of time of publication but is anticipated as a "hot fix" for version 1.1.1 and for the 2.x branch.

On Xerox AltaLink B8045/B8055/B8065/B8075/B8090 and C8030/C8035/C8045/C8055/C8070 multifunction printers with software releases before 101.00x.099.28200, portions of the drive containing executable code were not encrypted thus leaving it open to potential cryptographic information disclosure.

GitLab EE 8.4 through 12.5, 12.4.3, and 12.3.6 stored several tokens in plaintext.

In Moxa ioLogik 2500 series firmware, Version 3.0 or lower, and IOxpress configuration utility, Version 2.3.0 or lower, sensitive information is stored in configuration files without encryption, which may allow an attacker to access an administrative account.

The firmwaredownload command on Brocade Fabric OS v9.2.0 could log the FTP/SFTP/SCP server password in clear text in the SupportSave file when performing a downgrade from Fabric OS v9.2.0 to any earlier version of Fabric OS.

Exposure of senstive information to an unauthorised actor in the "com.onepeloton.erlich" mobile application up to and including version 1.7.22 allows a remote attacker to access developer files stored in an AWS S3 bucket, by reading credentials stored in plain text within the mobile application.

An issue was found on the Ruijie EG-2000 series gateway. An attacker can easily dump cleartext stored passwords in /data/config.text with simple XORs. This affects EG-2000SE EG_RGOS 11.1(1)B1.

A cleartext storage in a file or on disk (CWE-313) vulnerability in FortiOS SSL VPN 6.2.0 through 6.2.2, 6.0.9 and earlier and FortiProxy 2.0.0, 1.2.9 and earlier may allow an attacker to retrieve a logged-in SSL VPN user's credentials should that attacker be able to read the session file stored on the targeted device's system.

In Bitcoin Core 0.18.0, bitcoin-qt stores wallet.dat data unencrypted in memory. Upon a crash, it may dump a core file. If a user were to mishandle a core file, an attacker can reconstruct the user's wallet.dat file, including their private keys, via a grep "6231 0500" command.

The /device/signin end-point for the Ourphoto App version 1.4.1 discloses clear-text password information for functionality within the picture frame devices. The deviceVideoCallPassword and mqttPassword are returned in clear-text. The lack of sessions management and presence of insecure direct object references allows to return password information for other end-users devices. Many of the picture frame devices offer video calling, and it is likely this information can be used to abuse that functionality.

Pentaminds CuroVMS v2.0.1 was discovered to contain exposed sensitive information.

The DLink Router DIR-895L MFC v1.21b05 is vulnerable to credentials disclosure in telnet service through decompilation of firmware, that allows an unauthenticated attacker to gain access to the firmware and to extract sensitive data.

Cleartext Storage of Sensitive Information in SICK FTMg AIR FLOW SENSOR with Partnumbers 1100214, 1100215, 1100216, 1120114, 1120116, 1122524, 1122526 allows a remote attacker to potentially steal user credentials that are stored in the user’s browsers local storage via cross-site-scripting attacks.

SonarQube 8.4.2.36762 allows remote attackers to discover cleartext SMTP, SVN, and GitLab credentials via the api/settings/values URI. NOTE: reportedly, the vendor's position for SMTP and SVN is "it is the administrator's responsibility to configure it.

EnterpriseDB EDB Postgres Advanced Server (EPAS) before 14.6.0 logs unredacted passwords in situations where optional parameters are used with CREATE/ALTER USER/GROUP/ROLE, and redacting was configured with edb_filter_log.redact_password_commands. The fixed versions are 10.23.33, 11.18.29, 12.13.17, 13.9.13, and 14.6.0.

phpRank 1.8 stores the administrative password in plaintext on the server and in the "ap" cookie, which allows remote attackers to retrieve the administrative password.

Sme.UP ERP TOKYO V6R1M220406 was discovered to contain an information disclosure vulnerability via the /debug endpoint. This vulnerability allows attackers to access cleartext credentials needed to authenticate to the AS400 system.

Multi-Remote Next Generation Connection Manager (mRemoteNG) is free software that enables users to store and manage multi-protocol connection configurations to remotely connect to systems. mRemoteNG configuration files can be stored in an encrypted state on disk. mRemoteNG version <= v1.76.20 and <= 1.77.3-dev loads configuration files in plain text into memory (after decrypting them if necessary) at application start-up, even if no connection has been established yet. This allows attackers to access contents of configuration files in plain text through a memory dump and thus compromise user credentials when no custom password encryption key has been set. This also bypasses the connection configuration file encryption setting by dumping already decrypted configurations from memory.

Ribose RNP before 0.16.3 sometimes lets secret keys remain unlocked after use.

TP-Link Tapo APK up to v2.12.703 uses hardcoded credentials for access to the login panel.

The default "basic" security setting' in config.php for TWIG webmail 2.7.4 and earlier stores cleartext usernames and passwords in cookies, which could allow attackers to obtain authentication information and gain privileges.

django-nopassword before 5.0.0 stores cleartext secrets in the database.

Snare for Linux before 1.7.0 has password disclosure because the rendered page contains the field RemotePassword.

The Danfoss AK-EM100 stores login credentials in cleartext.

An information disclosure vulnerability exists in the EPA protocol of Dut Computer Control Engineering Co.'s PLC MAC1100.

Atlas Copco Power Focus 6000 web server does not sanitize the login information stored by the authenticated user’s browser, which could allow an attacker with access to the user’s computer to gain credential information of the controller.

A vulnerability was found in Xunrui CMS 4.61 and classified as problematic. Affected by this issue is some unknown functionality of the file /dayrui/Fcms/View/system_log.html. The manipulation leads to information disclosure. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-224240.

Prior to Spark 2.3.3, in certain situations Spark would write user data to local disk unencrypted, even if spark.io.encryption.enabled=true. This includes cached blocks that are fetched to disk (controlled by spark.maxRemoteBlockSizeFetchToMem); in SparkR, using parallelize; in Pyspark, using broadcast and parallelize; and use of python udfs.

Phicomm K2 v22.6.534.263 was discovered to store the root and admin passwords in plaintext.

Phicomm K2G v22.6.3.20 was discovered to store the root and admin passwords in plaintext.

Insecure Permissions vulnerability in Cosy+ devices running a firmware 21.x below 21.2s10 or a firmware 22.x below 22.1s3 are susceptible to leaking information through cookies. This is fixed in version 21.2s10 and 22.1s3

django-celery-results through 1.2.1 stores task results in the database. Among the data it stores are the variables passed into the tasks. The variables may contain sensitive cleartext information that does not belong unencrypted in the database.

The PassWork extension 5.0.9 for Chrome and other browsers allows an attacker to obtain cleartext cached credentials.