Blink XT2 Sync Module firmware prior to 2.13.11 allows remote attackers to execute arbitrary commands on the device due to improperly sanitized input when configuring the devices wifi configuration via the ssid parameter.

Blink XT2 Sync Module firmware prior to 2.13.11 allows remote attackers to execute arbitrary commands on the device due to improperly sanitized input when configuring the devices wifi configuration via the key parameter.

Blink XT2 Sync Module firmware prior to 2.13.11 allows remote attackers to execute arbitrary commands on the device due to improperly sanitized input when configuring the devices wifi configuration via the bssid parameter.

The AWS IoT Device SDK v2 for Java, Python, C++ and Node.js appends a user supplied Certificate Authority (CA) to the root CAs instead of overriding it on Unix systems. TLS handshakes will thus succeed if the peer can be verified either from the user-supplied CA or the system’s default trust-store. Attackers with access to a host’s trust stores or are able to compromise a certificate authority already in the host's trust store (note: the attacker must also be able to spoof DNS in this case) may be able to use this issue to bypass CA pinning. An attacker could then spoof the MQTT broker, and either drop traffic and/or respond with the attacker's data, but they would not be able to forward this data on to the MQTT broker because the attacker would still need the user's private keys to authenticate against the MQTT broker. The 'aws_tls_ctx_options_override_default_trust_store_*' function within the aws-c-io submodule has been updated to override the default trust store. This corrects this issue. This issue affects: Amazon Web Services AWS IoT Device SDK v2 for Java versions prior to 1.5.0 on Linux/Unix. Amazon Web Services AWS IoT Device SDK v2 for Python versions prior to 1.6.1 on Linux/Unix. Amazon Web Services AWS IoT Device SDK v2 for C++ versions prior to 1.12.7 on Linux/Unix. Amazon Web Services AWS IoT Device SDK v2 for Node.js versions prior to 1.5.3 on Linux/Unix. Amazon Web Services AWS-C-IO 0.10.4 on Linux/Unix.

Connections initialized by the AWS IoT Device SDK v2 for Java (versions prior to 1.4.2), Python (versions prior to 1.6.1), C++ (versions prior to 1.12.7) and Node.js (versions prior to 1.5.3) did not verify server certificate hostname during TLS handshake when overriding Certificate Authorities (CA) in their trust stores on MacOS. This issue has been addressed in aws-c-io submodule versions 0.10.5 onward. This issue affects: Amazon Web Services AWS IoT Device SDK v2 for Java versions prior to 1.4.2 on macOS. Amazon Web Services AWS IoT Device SDK v2 for Python versions prior to 1.6.1 on macOS. Amazon Web Services AWS IoT Device SDK v2 for C++ versions prior to 1.12.7 on macOS. Amazon Web Services AWS IoT Device SDK v2 for Node.js versions prior to 1.5.3 on macOS. Amazon Web Services AWS-C-IO 0.10.4 on macOS.

Improper JPAKE implementation allows offline PIN brute-forcing due to the initialization of random values to a known value, which leads to unauthorized authentication to amzn.lightning services. This issue affects: Amazon Fire TV Stick 3rd gen versions prior to 6.2.9.5. Insignia TV with FireOS 7.6.3.3.

Connections initialized by the AWS IoT Device SDK v2 for Java (versions prior to 1.3.3), Python (versions prior to 1.5.18), C++ (versions prior to 1.12.7) and Node.js (versions prior to 1.5.1) did not verify server certificate hostname during TLS handshake when overriding Certificate Authorities (CA) in their trust stores on Windows. This issue has been addressed in aws-c-io submodule versions 0.9.13 onward. This issue affects: Amazon Web Services AWS IoT Device SDK v2 for Java versions prior to 1.3.3 on Microsoft Windows. Amazon Web Services AWS IoT Device SDK v2 for Python versions prior to 1.5.18 on Microsoft Windows. Amazon Web Services AWS IoT Device SDK v2 for C++ versions prior to 1.12.7 on Microsoft Windows. Amazon Web Services AWS IoT Device SDK v2 for Node.js versions prior to 1.5.3 on Microsoft Windows.

Blink XT2 Sync Module firmware prior to 2.13.11 allows remote attackers to execute arbitrary commands on the device due to improperly sanitized input when the device retrieves updates scripts from the internet.

Blink XT2 Sync Module firmware prior to 2.13.11 allows remote attackers to execute arbitrary commands on the device due to improperly sanitized input when retrieving internal network configuration data.

This vulnerability allows remote attackers to execute arbitrary code on vulnerable installations of Amazon Music Player 6.1.5.1213. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the processing of URI handlers. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code under the context of the current process. Was ZDI-CAN-5521.

In aws-lambda versions prior to version 1.0.5, the "config.FunctioName" is used to construct the argument used within the "exec" function without any sanitization. It is possible for a user to inject arbitrary commands to the "zipCmd" used within "config.FunctionName".

D-Link G416 flupl self Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link G416 wireless routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP service listening on TCP port 80. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21294.

D-Link DI-7003GV2 v24.04.18D1, DI-7100G+V2 v24.04.18D1, DI-7100GV2 v24.04.18D1, DI-7200GV2 v24.04.18E1, DI-7300G+V2 v24.04.18D1, and DI-7400G+V2 v24.04.18D1 are vulnerable to Remote Command Execution. An attacker can achieve arbitrary command execution by sending a carefully crafted malicious string to the CGI function responsible for handling usb_paswd.asp.

DBA-1510P firmware 1.70b009 and earlier allows an attacker to execute arbitrary OS commands via Web User Interface.

The management console on the Symantec Web Gateway (SWG) appliance before 5.1.1 allows remote attackers to execute arbitrary commands by injecting a command into an application script.

A command injection vulnerability in the CGI program of the Zyxel ARMOR Z1/Z2 firmware could allow an attacker to execute arbitrary OS commands via a LAN interface.

Bulb Security Smartphone Pentest Framework (SPF) before 0.1.3 allows remote attackers to execute arbitrary commands via shell metacharacters in the ipAddressTB parameter to (1) remoteAttack.pl or (2) guessPassword.pl in frameworkgui/; the filename parameter to (3) CSAttack.pl or (4) SEAttack.pl in frameworkgui/; the phNo2Attack parameter to (5) CSAttack.pl or (6) SEAttack.pl in frameworkgui/; the (7) platformDD2 parameter to frameworkgui/SEAttack.pl; the (8) agentURLPath or (9) agentControlKey parameter to frameworkgui/attach2agents.pl; or the (10) controlKey parameter to frameworkgui/attachMobileModem.pl. NOTE: The hostingPath parameter to CSAttack.pl and SEAttack.pl vectors and the appURLPath parameter to attachMobileModem.pl vector are covered by CVE-2012-5878.

D-Link DAP-1325 HNAP SetAPLanSettings SubnetMask Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of a request parameter provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18814.

This vulnerability allows network-adjacent attackers to execute arbitrary commands on affected installations of D-Link DIR-2150 4.0.1 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the xupnpd service, which listens on TCP port 4044 by default. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of the service account. Was ZDI-CAN-15905.

Wi-Fi Alliance wfa_dut (in Wi-Fi Test Suite) through 9.0.0 allows OS command injection via 802.11x frames because the system() library function is used. For example, on Arcadyan FMIMG51AX000J devices, this leads to wfaTGSendPing remote code execution as root via traffic to TCP port 8000 or 8080 on a LAN interface. On other devices, this may be exploitable over a WAN interface.

An unauthenticated remote code execution vulnerability was reported in some Motorola-branded Binatone Hubble Cameras that could allow an attacker on the same network unauthorized access to the device.

An OS command injection vulnerability in the ccm_debug component of MIPC Camera firmware prior to v5.4.1.240424171021 allows attackers within the same network to execute arbitrary code via a crafted HTML request.

Tenda AC7 v.15.03.06.44 ate_ifconfig_set has pre-authentication command injection allowing remote attackers to execute arbitrary code.

A command injection issue in TOTOLINK A6000R V1.0.1-B20201211.2000 firmware allows a remote attacker to execute arbitrary code via the iface parameter in the vif_enable function.

A command injection vulnerability exists in Wyze V4 Pro firmware versions before 4.50.4.9222, which allows attackers to execute arbitrary commands over Bluetooth as root during the camera setup process.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker via the vulnerable /sqfs/lib/libsal.so.0.0 library used by a CGI application, as demonstrated by setup.cgi?token=';$HTTP_USER_AGENT;' with an OS command in the User-Agent field. This affects GC108P before 1.0.7.3, GC108PP before 1.0.7.3, GS108Tv3 before 7.0.6.3, GS110TPPv1 before 7.0.6.3, GS110TPv3 before 7.0.6.3, GS110TUPv1 before 1.0.4.3, GS710TUPv1 before 1.0.4.3, GS716TP before 1.0.2.3, GS716TPP before 1.0.2.3, GS724TPPv1 before 2.0.4.3, GS724TPv2 before 2.0.4.3, GS728TPPv2 before 6.0.6.3, GS728TPv2 before 6.0.6.3, GS752TPPv1 before 6.0.6.3, GS752TPv2 before 6.0.6.3, MS510TXM before 1.0.2.3, and MS510TXUP before 1.0.2.3.

EnGenius EnStation5-AC A8J-ENS500AC 1.0.0 devices allow blind OS command injection via shell metacharacters in the Ping and Speed Test parameters.

TOTOLINK X5000R v9.1.0cu.2350_B20230313 was discovered to contain a command injection via the disconnectVPN function.

An issue was discovered on D-Link DIR-802 A1 devices through 1.00b05. Universal Plug and Play (UPnP) is enabled by default on port 1900. An attacker can perform command injection by injecting a payload into the Search Target (ST) field of the SSDP M-SEARCH discover packet. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

A remote code execution vulnerability affecting a Valmet DNA service listening on TCP port 1517, allows an attacker to execute commands with SYSTEM privileges This issue affects: Valmet DNA versions from Collection 2012 until Collection 2021.

The XML-RPC implementation on Cisco TelePresence endpoint devices with software 1.2.x through 1.5.x allows remote attackers to execute arbitrary commands via a TCP request, related to a "command injection vulnerability," aka Bug ID CSCtb52587.

TOTOLINK A3300R V17.0.0cu.557_B20221024 was discovered to contain a command injection vulnerability via the tz parameter in the setNtpCfg function.

WRC-300FEBK, WRC-F300NF, WRC-733FEBK, WRH-300RD, WRH-300BK, WRH-300SV, WRH-300WH, WRH-H300WH, WRH-H300BK, WRH-300BK-S, and WRH-300WH-S all versions allows an unauthenticated network-adjacent attacker to execute an arbitrary OS command via unspecified vectors.

An unauthenticated command injection vulnerability exists in the parameters of operation 48 in the controller_server service on Gryphon Tower routers. An unauthenticated remote attacker on the same network can execute commands as root on the device by sending a specially crafted malicious packet to the controller_server service on port 9999.

An unauthenticated command injection vulnerability exists in the parameters of operation 49 in the controller_server service on Gryphon Tower routers. An unauthenticated remote attacker on the same network can execute commands as root on the device by sending a specially crafted malicious packet to the controller_server service on port 9999.

D-Link DAP-1325 HNAP SetHostIPv6StaticSettings StaticDNS2 Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of a request parameter provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18819.

D-Link DAP-1325 HNAP SetAPLanSettings PrimaryDNS Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of a request parameter provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18812.

D-Link DAP-1325 HNAP SetAPLanSettings SecondaryDNS Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of a request parameter provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18813.

D-Link DAP-1325 HNAP SetHostIPv6StaticSettings StaticDefaultGateway Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of a request parameter provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18817.

D-Link DAP-1325 HNAP SetSetupWizardStatus Enabled Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of a request parameter provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18821.

D-Link DAP-1325 HNAP SetAPLanSettings DeviceName Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of a request parameter provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18808.

D-Link DAP-1325 HNAP SetHostIPv6StaticSettings StaticAddress Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of a request parameter provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18816.

D-Link DAP-1325 HNAP SetHostIPv6StaticSettings StaticDNS1 Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of a request parameter provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18818.

D-Link DAP-1325 HNAP SetAPLanSettings Gateway Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of a request parameter provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18809.

D-Link DAP-1325 HNAP SetHostIPv6Settings IPv6Mode Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of a request parameter provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18815.

D-Link DAP-1325 HNAP SetHostIPv6StaticSettings StaticPrefixLength Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of a request parameter provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18820.

D-Link DAP-1325 HNAP SetAPLanSettings IPAddr Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of a request parameter provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18810.

Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in Brivo ACS100, ACS300 allows OS Command Injection, Bypassing Physical Security.This issue affects ACS100 (Network Adjacent Access), ACS300 (Physical Access): from 5.2.4 before 6.2.4.3.

A vulnerability in the Cisco Discovery Protocol (CDP) implementation for the Cisco TelePresence Codec (TC) and Collaboration Endpoint (CE) Software could allow an unauthenticated, adjacent attacker to inject arbitrary shell commands that are executed by the device. The vulnerability is due to insufficient input validation of received CDP packets. An attacker could exploit this vulnerability by sending crafted CDP packets to an affected device. A successful exploit could allow the attacker to execute arbitrary shell commands or scripts on the targeted device.

NETGEAR RAX30 DHCP Server Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR RAX30 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the DHCP server. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-19705.