The IBM Security Access Manager appliance includes configuration files that contain obfuscated plaintext-passwords which authenticated users can access.

A vulnerability in the installer software of Cisco ThousandEyes Recorder could allow an unauthenticated, local attacker to access sensitive information that is contained in the ThousandEyes Recorder installer software. This vulnerability exists because sensitive information is included in the application installer. An attacker could exploit this vulnerability by downloading the installer and extracting its contents. A successful exploit could allow the attacker to access sensitive information that is included in the application installer.

Lexiglot through 2014-11-20 allows local users to obtain sensitive information by listing a process because the username and password are on the command line.

MikroTik WinBox 3.22 and below stores the user's cleartext password in the settings.cfg.viw configuration file when the Keep Password field is set and no Master Password is set. Keep Password is set by default and, by default Master Password is not set. An attacker with access to the configuration file can extract a username and password to gain access to the router.

The installation process in IBM Security AppScan Enterprise 8.x before 8.6.0.2 iFix 003, 8.7.x before 8.7.0.1 iFix 003, 8.8.x before 8.8.0.1 iFix 002, and 9.0.x before 9.0.0.1 iFix 001 on Linux places a cleartext password in a temporary file, which allows local users to obtain sensitive information by reading this file.

Ansible before 1.5.5 constructs filenames containing user and password fields on the basis of deb lines in sources.list, which might allow local users to obtain sensitive credential information in opportunistic circumstances by leveraging existence of a file that uses the "deb http://user:pass@server:port/" format.

Jenkins Beaker Builder Plugin 1.9 and earlier stored credentials unencrypted in its global configuration file on the Jenkins master where they could be viewed by users with access to the master file system.

In JetBrains IntelliJ IDEA before 2021.3.3 it was possible to get passwords from protected fields

A flaw was found in ActiveMQ Artemis management API from version 2.7.0 up until 2.12.0, where a user inadvertently stores passwords in plaintext in the Artemis shadow file (etc/artemis-users.properties file) when executing the `resetUsers` operation. A local attacker can use this flaw to read the contents of the Artemis shadow file.

rubygem-hammer_cli_foreman: File /etc/hammer/cli.modules.d/foreman.yml world readable

A vulnerability has been identified in SCALANCE X-200 switch family (incl. SIPLUS NET variants) (All Versions < V5.2.4), SCALANCE X-200IRT switch family (incl. SIPLUS NET variants) (All versions < V5.5.0), SCALANCE X-300 switch family (incl. X408 and SIPLUS NET variants) (All versions < V4.1.3), SCALANCE X-414-3E (All versions). The affected devices store passwords in a recoverable format. An attacker may extract and recover device passwords from the device configuration. Successful exploitation requires access to a device configuration backup and impacts confidentiality of the stored passwords.

IBM Watson Studio Local 1.2.3 stores key files in the user's home directory which could be obtained by another local user. IBM X-Force ID: 161413.

IBM Spectrum Protect Plus 10.1.2 may display the vSnap CIFS password in the IBM Spectrum Protect Plus Joblog. This can result in an attacker gaining access to sensitive information as well as vSnap. IBM X-Force ID: 162173.

IBM UrbanCode Deploy (UCD) 7.0.4.0 stores user credentials in plain in clear text which can be read by a local user. IBM X-Force ID: 171250.

IBM QRadar SIEM 7.3.0 through 7.3.3 uses weak credential storage in some instances which could be decrypted by a local attacker. IBM X-Force ID: 164429.

IBM Security Guardium Data Encryption (GDE) 3.0.0.2 stores user credentials in plain in clear text which can be read by a local privileged user. IBM X-Force ID: 171831.

IBM Security Guardium Big Data Intelligence (SonarG) 4.0 stores user credentials in plain in clear text which can be read by a local user. IBM X-Force ID: 160987.

Unprotected Storage of Credentials vulnerability in McAfee Advanced Threat Defense (ATD) prior to 4.8 allows local attacker to gain access to the root password via accessing sensitive files on the system. This was originally published with a CVSS rating of High, further investigation has resulted in this being updated to Critical. The root password is common across all instances of ATD prior to 4.8. See the Security bulletin for further details

Crestron AM-100 with firmware 1.6.0.2 and AM-101 with firmware 2.7.0.2 stores usernames, passwords, and other configuration options in the file generated via the "export configuration" feature. The configuration file is encrypted using the awenc binary. The same binary can be used to decrypt any configuration file since all the encryption logic is hard coded. A local attacker can use this vulnerability to gain access to devices username and passwords.

IBM MQ Advanced Cloud Pak (IBM Cloud Private 1.0.0 through 3.0.1) stores user credentials in plain in clear text which can be read by a local user. IBM X-Force ID: 159465.

In Versa Director, Versa Analytics and VOS, Passwords are not hashed using an adaptive cryptographic hash function or key derivation function prior to storage. Popular hashing algorithms based on the Merkle-Damgardconstruction (such as MD5 and SHA-1) alone are insufficient in thwarting password cracking. Attackers can generate and use precomputed hashes for all possible password character combinations (commonly referred to as "rainbow tables") relatively quickly. The use of adaptive hashing algorithms such asscryptorbcryptor Key-Derivation Functions (i.e.PBKDF2) to hash passwords make generation of such rainbow tables computationally infeasible.

An issue was discovered in Idelji Web ViewPoint H01ABO-H01BY and L01ABP-L01ABZ, Web ViewPoint Plus H01AAG-H01AAQ and L01AAH-L01AAR, and Web ViewPoint Enterprise H01-H01AAE and L01-L01AAF. By reading ADB or AADB file content within the Installation subvolume, a Guardian user can discover the password of the group.user or alias who acknowledges events from the WVP Events screen.

Rockwell Automation ISaGRAF Runtime Versions 4.x and 5.x stores the password in plaintext in a file that is in the same directory as the executable file. ISaGRAF Runtime reads the file and saves the data in a variable without any additional modification. A local, unauthenticated attacker could compromise the user passwords, resulting in information disclosure.

CloudForms stores user passwords in recoverable format

Claws Mail vCalendar plugin: credentials exposed on interface

Jenkins HP ALM Quality Center Plugin 1.6 and earlier stores a password unencrypted in its global configuration file on the Jenkins master where it can be viewed by users with access to the master file system.

Jenkins couchdb-statistics Plugin 0.3 and earlier stores its server password unencrypted in its global configuration file on the Jenkins controller where it can be viewed by users with access to the Jenkins controller file system.

BIOTRONIK CardioMessenger II, The affected products use individual per-device credentials that are stored in a recoverable format. An attacker with physical access to the CardioMessenger can use these credentials for network authentication and decryption of local data in transit.

HCL Launch stores user credentials in plain clear text which can be read by a local user.

Jenkins Weibo Plugin 1.0.1 and earlier stores credentials unencrypted in its global configuration file on the Jenkins master where they can be viewed by users with access to the master file system.

Information exposure through process environment vulnerability in Synology Calendar before 2.3.3-0620 allows local users to obtain credentials via cmdline.

eyeDisk implements the unlock feature by sending a cleartext password. The password can be discovered by sniffing USB traffic or by sending a 06 05 52 41 01 b0 00 00 00 00 00 00 SCSI command.

In Vijeo Citect 7.30 and 7.40, and CitectSCADA 7.30 and 7.40, a vulnerability has been identified that may allow an authenticated local user access to Citect user credentials.

Cloud Foundry BOSH 270.x versions prior to v270.1.1, contain a BOSH Director that does not properly redact credentials when configured to use a MySQL database. A local authenticated malicious user may read any credentials that are contained in a BOSH manifest.

Western Digital SanDisk X300, X300s, X400, and X600 devices: A vulnerability in the wear-leveling algorithm of the drive may cause cryptographically sensitive parameters (such as data encryption keys) to remain on the drive media after their intended erasure.

An insufficiently protected credentials vulnerability exists in Jenkins Repository Connector Plugin 1.2.4 and earlier in src/main/java/org/jvnet/hudson/plugins/repositoryconnector/ArtifactDeployer.java, src/main/java/org/jvnet/hudson/plugins/repositoryconnector/Repository.java, src/main/java/org/jvnet/hudson/plugins/repositoryconnector/UserPwd.java that allows an attacker with local file system access or control of a Jenkins administrator's web browser (e.g. malicious extension) to retrieve the password stored in the plugin configuration.

A flaw has been found in 389-ds-base versions 1.4.x.x before 1.4.1.3. When executed in verbose mode, the dscreate and dsconf commands may display sensitive information, such as the Directory Manager password. An attacker, able to see the screen or record the terminal standard error output, could use this flaw to gain sensitive information.

Jenkins Bitbucket OAuth Plugin 0.9 and earlier stored credentials unencrypted in the global config.xml configuration file on the Jenkins master where they could be viewed by users with access to the master file system.

Jenkins Dynatrace Application Monitoring Plugin 2.1.3 and earlier stored credentials unencrypted in its global configuration file on the Jenkins master where they could be viewed by users with access to the master file system.

Jenkins Configuration as Code Plugin 1.20 and earlier did not treat the proxy password as a secret to be masked when logging or encrypted for export.

Jenkins Maven Release Plugin 0.14.0 and earlier stored credentials unencrypted on the Jenkins master where they could be viewed by users with access to the master file system.

During HE deployment via cockpit-ovirt, cockpit-ovirt generates an ansible variable file `/var/lib/ovirt-hosted-engine-setup/cockpit/ansibleVarFileXXXXXX.var` which contains the admin and the appliance passwords as plain-text. At the of the deployment procedure, these files are deleted.

Jenkins Gem Publisher Plugin stores credentials unencrypted in its global configuration file on the Jenkins master where they can be viewed by users with access to the master file system.

Jenkins Assembla Plugin stores credentials unencrypted in its global configuration file on the Jenkins master where they can be viewed by users with access to the master file system.

Jenkins Zulip Plugin 1.1.0 and earlier stored credentials unencrypted in its global configuration file on the Jenkins master where they could be viewed by users with access to the master file system.

Jenkins GitLab Logo Plugin stores credentials unencrypted in its global configuration file on the Jenkins master where they can be viewed by users with access to the master file system.

Jenkins vFabric Application Director Plugin stores credentials unencrypted in its global configuration file on the Jenkins master where they can be viewed by users with access to the master file system.

Synametrics SynaMan 4.0 build 1488 uses cleartext password storage for SMTP credentials.

Jenkins TestLink Plugin 3.16 and earlier stores credentials unencrypted in its global configuration file on the Jenkins master where they can be viewed by users with access to the master file system.