Insecure storage of sensitive information in ABB Device Library Wizard versions 6.0.X, 6.0.3.1 and 6.0.3.2 allows unauthenticated low privilege user to read file that contains confidential data

Insertion of Sensitive Information into Log File vulnerability in ABB QCS 800xA, ABB QCS AC450, ABB Platform Engineering Tools. An attacker, who already has local access to the QCS nodes, could successfully obtain the password for a system user account. Using this information, the attacker could have the potential to exploit this vulnerability to gain control of system nodes. This issue affects QCS 800xA: from 1.0;0 through 6.1SP2; QCS AC450: from 1.0;0 through 5.1SP2; Platform Engineering Tools: from 1.0:0 through 2.3.0.

ABB PCM600 before 2.7 improperly stores the main application password after a password change, which allows local users to obtain sensitive information via unspecified vectors.

The Configuration pages in ABB Telephone Gateway TG/S 3.2 and Busch-Jaeger 6186/11 Telefon-Gateway for user profiles and services transfer the password in plaintext (although hidden when displayed).

ABB PCM600 before 2.7 improperly stores OPC Server IEC61850 passwords in unspecified temporary circumstances, which allows local users to obtain sensitive information via unknown vectors.

A vulnerability exists in the VideONet product included in the listed System 800xA versions, where VideONet is used.  An attacker who successfully exploited the vulnerability could, in the worst case scenario, stop or manipulate the video feed. This issue affects System 800xA: 5.1.X; System 800xA: 6.0.3.X; System 800xA: 6.1.1.X; System 800xA: 6.2.X.

In ABB IP GATEWAY 3.39 and prior, some configuration files contain passwords stored in plain-text, which may allow an attacker to gain unauthorized access.

Storing Passwords in a Recoverable Format vulnerability in ABB Zenon 8.20 allows an attacker who successfully exploit the vulnerability may add or alter data points and corresponding attributes. Once such engineering data is used the data visualization will be altered for the end user.

Storing Passwords in a Recoverable Format vulnerability in ABB Zenon 8.20 allows an attacker who successfully exploit the vulnerability may add more network clients that may monitor various activities of the Zenon.

Credentials Disclosure vulnerabilities allow access to on board project back-up bundles.  Affected products: ABB ASPECT - Enterprise v3.08.02; NEXUS Series v3.08.02; MATRIX Series v3.08.02

In S+ Operations and S+ Historian, the passwords of internal users (not Windows Users) are encrypted but improperly stored in a database.

The IRC5 family with UAS service enabled comes by default with credentials that can be found on publicly available manuals. ABB considers this a well documented functionality that helps customer set up however, out of our research, we found multiple production systems running these exact default credentials and consider thereby this an exposure that should be mitigated. Moreover, future deployments should consider that these defaults should be forbidden (user should be forced to change them).

The Redis data structure component used in ABB eSOMS versions 6.0 to 6.0.2 stores credentials in clear text. If an attacker has file system access, this can potentially compromise the credentials' confidentiality.

Username Enumeration vulnerabilities allow access to application level username add, delete, modify and list functions.  Affected products: ABB ASPECT - Enterprise v3.08.02; NEXUS Series v3.08.02; MATRIX Series v3.08.02

Insufficient password protection in the attestation database for Open CIT may allow an authenticated user to potentially enable information disclosure via local access.

A password management issue exists where the Organization authentication username and password were stored in plaintext in log files. A locally authenticated attacker who is able to access these stored plaintext credentials can use them to login to the Organization. Affected products are: Juniper Networks Service Insight versions from 15.1R1, prior to 18.1R1. Service Now versions from 15.1R1, prior to 18.1R1.

An Unprotected Storage of Credentials vulnerability in the identity and access management certificate generation procedure allows a local attacker to gain access to confidential information. This issue affects: Juniper Networks SBR Carrier: 8.4.1 versions prior to 8.4.1R13; 8.5.0 versions prior to 8.5.0R4.

IBM Security Verify Bridge 1.0.5.0 stores user credentials in plain clear text which can be read by a locally authenticated user. IBM X-Force ID: 208154.

Insufficient password protection in the attestation database for Open CIT may allow an authenticated user to potentially enable information disclosure via local access.

A vulnerability has been found in CESNET theme-cesnet up to 1.x on ownCloud and classified as problematic. Affected by this vulnerability is an unknown functionality of the file cesnet/core/lostpassword/templates/resetpassword.php. The manipulation leads to insufficiently protected credentials. Attacking locally is a requirement. Upgrading to version 2.0.0 is able to address this issue. The identifier of the patch is 2b857f2233ce5083b4d5bc9bfc4152f933c3e4a6. It is recommended to upgrade the affected component. The identifier VDB-217633 was assigned to this vulnerability.

Easy Hosting Control Panel (EHCP) v0.37.12.b allows attackers to obtain sensitive information by leveraging cleartext password storage.

A credentials leak flaw was found in OpenStack Barbican. This flaw allows a local authenticated attacker to read the configuration file, gaining access to sensitive credentials.

IBM Cognos Analytics 11.1.7, 11.2.0, and 11.2.1 could allow a local attacker to obtain information due to the autocomplete feature on password input fields. IBM X-Force ID: 214345.

IBM Tivoli Key Lifecycle Manager 3.0, 3.0.1, 4.0, and 4.1 stores user credentials in plain clear text which can be read by a local user. X-Force ID: 212781.

An issue was discovered in certain Apple products. macOS before 10.13.4 is affected. The issue involves the "Admin Framework" component. It allows local users to discover a password by listing a process and its arguments during sysadminctl execution.

IBM QRadar Suite Software 1.10.12.0 through 1.10.23.0 and IBM Cloud Pak for Security 1.10.0.0 through 1.10.11.0 stores user credentials in plain clear text which can be read by a local user. IBM X-Force ID: 281430.

Medtronic 2090 CareLink Programmer uses a per-product username and password that is stored in a recoverable format.

In Rapid Software LLC's Rapid SCADA versions prior to Version 5.8.4, the affected product stores plaintext credentials in various places. This may allow an attacker with local access to see them.

IBM Storage Defender - Resiliency Service 2.0 stores user credentials in plain clear text which can be read by a local user. IBM X-Force ID: 278748.

IBM TXSeries for Multiplatforms 8.2 transmits or stores authentication credentials, but it uses an insecure method that is susceptible to unauthorized interception and/or retrieval. IBM X-Force ID: 280192.

A vulnerability in the web-based management interface of Cisco ATA 190 Series Multiplatform Analog Telephone Adapter firmware could allow an authenticated, local attacker with low privileges to view passwords on an affected device. This vulnerability is due to incorrect sanitization of HTML content from an affected device. A successful exploit could allow the attacker to view passwords that belong to other users.

Sandboxie is a sandbox-based isolation software for 32-bit and 64-bit Windows NT-based operating systems. In versions 1.16.1 and below, a critical security vulnerability exists in password handling mechanisms. During encrypted sandbox creation, user passwords are transmitted via shared memory, exposing them to potential interception. The vulnerability is particularly severe during password modification operations, where both old and new passwords are passed as plaintext command-line arguments to the Imbox process without any encryption or obfuscation. This implementation flaw allows any process within the user session, including unprivileged processes, to retrieve these sensitive credentials by reading the command-line arguments, thereby bypassing standard privilege requirements and creating a significant security risk. This is fixed in version 1.16.2.

A vulnerability in the storage method of the PON Controller configuration file could allow an authenticated, local attacker with low privileges to obtain the MongoDB credentials. This vulnerability is due to improper storage of the unencrypted database credentials on the device that is running Cisco IOS XR Software. An attacker could exploit this vulnerability by accessing the configuration files on an affected system. A successful exploit could allow the attacker to view MongoDB credentials.

SnapGathers versions prior to 4.9 are susceptible to a vulnerability which could allow a local authenticated attacker to discover plaintext domain user credentials

Dell EMC Avamar Server version 19.4 contains a plain-text password storage vulnerability in AvInstaller. A local attacker could potentially exploit this vulnerability, leading to the disclosure of certain user credentials. The attacker may be able to use the exposed credentials to access the vulnerable application with privileges of the compromised account.

In PEPPERL+FUCHS WirelessHART-Gateway <= 3.0.9 a form contains a password field with autocomplete enabled. The stored credentials can be captured by an attacker who gains control over the user's computer. Therefore the user must have logged in at least once.

A vulnerability in the CLI of Cisco Prime Infrastructure and Cisco Evolved Programmable Network (EPN) Manager could allow an authenticated, local attacker to access sensitive information stored on the underlying file system of an affected system. This vulnerability exists because sensitive information is not sufficiently secured when it is stored. An attacker could exploit this vulnerability by gaining unauthorized access to sensitive information on an affected system. A successful exploit could allow the attacker to create forged authentication requests and gain unauthorized access to the affected system.

The IBM Security Access Manager appliance includes configuration files that contain obfuscated plaintext-passwords which authenticated users can access.

IBM Common Licensing 9.0 stores user credentials in plain clear text which can be read by a local user.

Insufficiently protected credentials in USB provisioning for Intel(R) AMT SDK before version 16.0.3, Intel(R) SCS before version 12.2 and Intel(R) MEBx before versions 11.0.0.0012, 12.0.0.0011, 14.0.0.0004 and 15.0.0.0004 may allow an unauthenticated user to potentially enable information disclosure via physical access.

Envoy Passport for Android and Envoy Passport for iPhone could allow a local attacker to obtain sensitive information, caused by the storing of hardcoded OAuth Creds in plaintext. An attacker could exploit this vulnerability to obtain sensitive information.

In pam/gkr-pam-module.c in GNOME Keyring before 3.27.2, the user's password is kept in a session-child process spawned from the LightDM daemon. This can expose the credential in cleartext.

IBM API Connect V10.0.5.3 and V10.0.6.0 stores user credentials in browser cache which can be read by a local user. IBM X-Force ID: 271912.

Cleartext Storage of credentials in the iSmartAlarmData.xml configuration file in the iSmartAlarm application through 2.0.8 for Android allows an attacker to retrieve the username and password.

IBM Security Guardium Big Data Intelligence (SonarG) 3.1 stores user credentials in plain in clear text which can be read by a local user. IBM X-Force ID: 137778.

Unprotected Transport of Credentials vulnerability in SiteManager provisioning service allows local attacker to capture credentials if the service is used after provisioning. This issue affects: Secomea SiteManager All versions prior to 9.5 on Hardware.

Tauri is a framework for building binaries for all major desktop platforms. This advisory is not describing a vulnerability in the Tauri code base itself but a commonly used misconfiguration which could lead to leaking of the private key and updater key password into bundled Tauri applications using the Vite frontend in a specific configuration. The Tauri documentation used an insecure example configuration in the `Vite guide` to showcase how to use Tauri together with Vite. Copying the following snippet `envPrefix: ['VITE_', 'TAURI_'],` from this guide into the `vite.config.ts` of a Tauri project leads to bundling the `TAURI_PRIVATE_KEY` and `TAURI_KEY_PASSWORD` into the Vite frontend code and therefore leaking this value to the released Tauri application. Using the `envPrefix: ['VITE_'],` or any other framework than Vite means you are not impacted by this advisory. Users are advised to rotate their updater private key if they are affected by this (requires Tauri CLI >=1.5.5). After updating the envPrefix configuration, generate a new private key with `tauri signer generate`, saving the new private key and updating the updater's `pubkey` value on `tauri.conf.json` with the new public key. To update your existing application, the next application build must be signed with the older private key in order to be accepted by the existing application.