The Bosch Ethernet switch PRA-ES8P2S with software version 1.01.05 and earlier was found to be vulnerable to command injection through its diagnostics web interface. This allows execution of shell commands.

SV3C L-SERIES HD CAMERA V2.3.4.2103-S50-NTD-B20170508B and V2.3.4.2103-S50-NTD-B20170823B devices allow OS Command Injection.

An issue was discovered on Fujitsu ETERNUS CentricStor CS8000 (Control Center) devices before 8.1A SP02 P04. The vulnerability resides in the grel_finfo function in grel.php. An attacker is able to influence the username (user), password (pw), and file-name (file) parameters and inject special characters such as semicolons, backticks, or command-substitution sequences in order to force the application to execute arbitrary commands.

OS command injection in snmp.cgi in ASUSTOR ADM version 3.1.1 allows attackers to execute system commands without authentication via the "rocommunity" URL parameter.

Untrusted input execution via igetwild in all iRODS versions before 4.1.11 and 4.2.1 allows other iRODS users (potentially anonymous) to execute remote shell commands via iRODS virtual pathnames. To exploit this vulnerability, a virtual iRODS pathname that includes a semicolon would be retrieved via igetwild. Because igetwild is a Bash script, the part of the pathname following the semicolon would be executed in the user's shell.

Tenda AC18 router V15.03.05.19 and V15.03.05.05 was discovered to contain a remote code execution (RCE) vulnerability via the Mac parameter at ip/goform/WriteFacMac.

Roxy-WI is a web interface for managing Haproxy, Nginx, Apache and Keepalived servers. Versions prior to 6.1.1.0 are subject to a remote code execution vulnerability. System commands can be run remotely via the subprocess_execute function without processing the inputs received from the user in the /app/options.py file. Attackers need not be authenticated to exploit this vulnerability. Users are advised to upgrade. There are no known workarounds for this vulnerability.

Tenda AC10 US_AC10V1.0RTL_V15.03.06.26_multi_TD01 was discovered to contain a remote code execution (RCE) vulnerability via the lanIp parameter.

acccheck.pl in acccheck 0.2.1 allows Command Injection via shell metacharacters in a username or password file, as demonstrated by injection into an smbclient command line.

An unauthenticated attacker can update the hostname with a specially crafted name that will allow for shell commands to be executed during the core collection process. This vulnerability impacts products based on HID Mercury Intelligent Controllers LP1501, LP1502, LP2500, LP4502, and EP4502 which contain firmware versions prior to 1.302 for the LP series and 1.296 for the EP series. An attacker with this level of access on the device can monitor all communications sent to and from this device, modify onboard relays, change configuration files, or cause the device to become unstable. The injected commands only get executed during start up or when unsafe calls regarding the hostname are used. This allows the attacker to gain remote access to the device and can make their persistence permanent by modifying the filesystem.

An issue was discovered in OpenTSDB 2.3.0. Many parameters to the /q URI can execute commands, including o, key, style, and yrange and y2range and their JSON input.

In Festo Controller CECC-X-M1 product family in multiple versions, the http-endpoint "cecc-x-web-viewer-request-off" POST request doesn’t check for port syntax. This can result in unauthorized execution of system commands with root privileges due to improper access control command injection.

Dell EMC RecoverPoint versions prior to 5.1.2 and RecoverPoint for VMs versions prior to 5.1.1.3, contain a command injection vulnerability. An unauthenticated remote attacker may potentially exploit this vulnerability to execute arbitrary commands on the affected system with root privilege.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

Voltronic Power ViewPower Pro getMacAddressByIp Command Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Voltronic Power ViewPower Pro. Authentication is not required to exploit this vulnerability. The specific flaw exists within the getMacAddressByIP function. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-21163.

A OS command injection vulnerability in the CGI program of Zyxel USG FLEX 100(W) firmware versions 5.00 through 5.21 Patch 1, USG FLEX 200 firmware versions 5.00 through 5.21 Patch 1, USG FLEX 500 firmware versions 5.00 through 5.21 Patch 1, USG FLEX 700 firmware versions 5.00 through 5.21 Patch 1, USG FLEX 50(W) firmware versions 5.10 through 5.21 Patch 1, USG20(W)-VPN firmware versions 5.10 through 5.21 Patch 1, ATP series firmware versions 5.10 through 5.21 Patch 1, VPN series firmware versions 4.60 through 5.21 Patch 1, which could allow an attacker to modify specific files and then execute some OS commands on a vulnerable device.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

Crestron TSW-1060, TSW-760, TSW-560, TSW-1060-NC, TSW-760-NC, and TSW-560-NC devices before 2.001.0037.001 allow unauthenticated remote code execution via command injection in Crestron Toolbox Protocol (CTP).

In Festo Controller CECC-X-M1 product family in multiple versions, the http-endpoint "cecc-x-web-viewer-request-on" POST request doesn’t check for port syntax. This can result in unauthorized execution of system commands with root privileges due to improper access control command injection.

A remote unauthenticated user can execute commands as root in the Belkin N750 using firmware version 1.10.22 by sending a crafted HTTP request to twonky_command.cgi.

Remote code execution is possible in Cloudera Data Science Workbench version 1.3.0 and prior releases via unspecified attack vectors.

In Festo Controller CECC-X-M1 product family in multiple versions, the http-endpoint "cecc-x-refresh-request" POST request doesn’t check for port syntax. This can result in unauthorized execution of system commands with root privileges due to improper access control command injection.

The '/common/download_agent_installer.php' script in the Quest KACE System Management Appliance 8.0.318 is accessible by anonymous users and can be abused to execute arbitrary commands on the system.

In Belkin N300 Firmware 1.00.08, the script located at /setting_hidden.asp, which is accessible before and after configuring the device, exhibits multiple remote command injection vulnerabilities. The following parameters in the [form name] form; [list vulnerable parameters], are not properly sanitized after being submitted to the web interface in a POST request. With specially crafted parameters, it is possible to inject a an OS command which will be executed with root privileges, as the web interface, and all processes on the device, run as root.

A remote unauthenticated user can execute commands as root in the Belkin N750 using firmware version 1.10.22 by sending a crafted HTTP request to proxy.cgi.

Multiple vulnerabilities in the web-based management interface of Cisco HyperFlex HX could allow an unauthenticated, remote attacker to perform command injection attacks against an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

TOTOLink N600R V5.3c.7159_B20190425 was discovered to contain a command injection vulnerability via the webwlanidx parameter in /setting/setWebWlanIdx.

The ASUSTOR ADM 3.1.0.RFQ3 NAS portal suffers from an unauthenticated remote code execution vulnerability in the portal/apis/aggrecate_js.cgi file by embedding OS commands in the 'script' parameter.

A command injection vulnerability in the component /SetTriggerLEDBlink/Blink of D-Link DIR882 DIR882A1_FW130B06 allows attackers to escalate privileges to root via a crafted payload.

It is found that there is a command injection vulnerability in the setWiFiWpsStart interface in TOTOlink A7100RU (v7.4cu.2313_b20191024) router, which allows an attacker to execute arbitrary commands through a carefully constructed payload.

TOTOLink N600R V5.3c.7159_B20190425 was discovered to contain a command injection vulnerability via the filename parameter in /setting/setUpgradeFW.

TOTOLink N600R V5.3c.7159_B20190425 was discovered to contain a command injection vulnerability via the langtype parameter in /setting/setLanguageCfg.

TOTOLink N600R V5.3c.7159_B20190425 was discovered to contain a command injection vulnerability via the devicename parameter in /setting/setDeviceName.

Unify OpenStage / OpenScape Desk Phone IP before V3 R3.11.0 SIP has an OS command injection vulnerability in the web based management interface

Tenda TX9 Pro 22.03.02.10 devices allow OS command injection via set_route (called by doSystemCmd_route).

An issue was discovered on Fujitsu ETERNUS CentricStor CS8000 (Control Center) devices before 8.1A SP02 P04. The vulnerability resides in the requestTempFile function in hw_view.php. An attacker is able to influence the unitName POST parameter and inject special characters such as semicolons, backticks, or command-substitution sequences in order to force the application to execute arbitrary commands.

It is found that there is a command injection vulnerability in the setL2tpServerCfg interface in TOTOlink A7100RU (v7.4cu.2313_b20191024) router, which allows an attacker to execute arbitrary commands through a carefully constructed payload.

TOTOLink N600R V5.3c.7159_B20190425 was discovered to contain a command injection vulnerability via the filename parameter in /setting/setUploadSetting.

TOTOLink N600R V5.3c.7159_B20190425 was discovered to contain a command injection vulnerability via the ipdoamin parameter in /setting/setDiagnosisCfg.

D-Link DIR-823-Pro v1.0.2 was discovered to contain a command injection vulnerability in the function SetNTPserverSeting. This vulnerability allows attackers to execute arbitrary commands via the system_time_timezone parameter.

It is found that there is a command injection vulnerability in the setOpenVpnCfg interface in TOTOlink A7100RU (v7.4cu.2313_b20191024) router, which allows an attacker to execute arbitrary commands through a carefully constructed payload.

TOTOLink N600R V5.3c.7159_B20190425 was discovered to contain a command injection vulnerability via the devicemac parameter in /setting/setDeviceName.

An unvalidated REST API in the AppFormix Agent of Juniper Networks AppFormix allows an unauthenticated remote attacker to execute commands as root on the host running the AppFormix Agent, when certain preconditions are performed by the attacker, thus granting the attacker full control over the environment. This issue affects: Juniper Networks AppFormix 3 versions prior to 3.1.22, 3.2.14, 3.3.0.

The web console of FUJITSU Network IPCOM series (IPCOM EX2 IN(3200, 3500), IPCOM EX2 LB(1100, 3200, 3500), IPCOM EX2 SC(1100, 3200, 3500), IPCOM EX2 NW(1100, 3200, 3500), IPCOM EX2 DC, IPCOM EX2 DC, IPCOM EX IN(2300, 2500, 2700), IPCOM EX LB(1100, 1300, 2300, 2500, 2700), IPCOM EX SC(1100, 1300, 2300, 2500, 2700), and IPCOM EX NW(1100, 1300, 2300, 2500, 2700)) allows a remote attacker to execute an arbitrary OS command via unspecified vectors.

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 1 of 46).

Exposed Erlang Cookie could lead to Remote Command Execution (RCE) attack. Communication between Erlang nodes is done by exchanging a shared secret (aka "magic cookie"). There are cases where the magic cookie is included in the content of the logs. An attacker can use the cookie to attach to an Erlang node and run OS level commands on the system running the Erlang node. Affects version: 6.5.1. Fix version: 6.6.0.

TOTOLink N600R V5.3c.7159_B20190425 was discovered to contain a command injection vulnerability via the hosttime function in /setting/NTPSyncWithHost.

resi-calltrace in RESI Gemini-Net 4.2 is affected by OS Command Injection. It does not properly check the parameters sent as input before they are processed on the server. Due to the lack of validation of user input, an unauthenticated attacker can bypass the syntax intended by the software (e.g., concatenate `&|;\r\ commands) and inject arbitrary system commands with the privileges of the application user.

It is found that there is a command injection vulnerability in the setopenvpnclientcfg interface in TOTOlink A7100RU (v7.4cu.2313_b20191024) router, which allows attackers to execute arbitrary commands through a carefully constructed payload