D-Link DSL-3782 v1.03 and below was discovered to contain a command injection vulnerability via the function byte_4C0160.

A vulnerability was found in D-Link DIR-619L 2.04B04 and classified as critical. Affected by this issue is the function formSetWizard2. The manipulation of the argument curTime leads to buffer overflow. The attack may be launched remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DI-8003 16.07.16A1. It has been declared as critical. Affected by this vulnerability is the function upgrade_filter_asp of the file /upgrade_filter.asp. The manipulation of the argument path leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as critical, was found in D-Link DIR-619L 2.04B04. Affected is the function formSetEasy_Wizard. The manipulation of the argument curTime leads to buffer overflow. It is possible to launch the attack remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability, which was classified as critical, has been found in D-Link DIR-600L up to 2.07B01. Affected by this issue is the function formEasySetupWizard3. The manipulation of the argument host leads to buffer overflow. The attack may be launched remotely. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DIR-605L 2.13B01. It has been classified as critical. This affects the function formSetWAN_Wizard534. The manipulation of the argument curTime leads to buffer overflow. It is possible to initiate the attack remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability classified as critical was found in D-Link DIR-619L 2.04B04. This vulnerability affects the function formEasySetupWizard. The manipulation of the argument curTime leads to buffer overflow. The attack can be initiated remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability has been found in D-Link DIR-619L 2.04B04 and classified as critical. Affected by this vulnerability is the function formSetWAN_Wizard52. The manipulation of the argument curTime leads to buffer overflow. The attack can be launched remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability has been found in D-Link DIR-600L up to 2.07B01 and classified as critical. This vulnerability affects the function formEasySetupWizard. The manipulation of the argument host leads to buffer overflow. The attack can be initiated remotely. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability, which was classified as critical, has been found in D-Link DIR-619L 2.04B04. This issue affects the function formEasySetupWizard3. The manipulation of the argument wan_connected leads to buffer overflow. The attack may be initiated remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DIR-605L 2.13B01. It has been declared as critical. This vulnerability affects the function formSetWAN_Wizard55. The manipulation of the argument curTime leads to buffer overflow. The attack can be initiated remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

An issue was discovered on D-Link DSL-3782 EU 1.01 devices. An authenticated user can pass a long buffer as a 'get' parameter to the '/userfs/bin/tcapi' binary (in the Diagnostics component) using the 'get <node_name attr>' function and cause memory corruption. Furthermore, it is possible to redirect the flow of the program and execute arbitrary code.

An issue was discovered on D-Link DSL-3782 EU 1.01 devices. An authenticated user can pass a long buffer as an 'unset' parameter to the '/userfs/bin/tcapi' binary (in the Diagnostics component) using the 'unset <node_name>' function and cause memory corruption. Furthermore, it is possible to redirect the flow of the program and execute arbitrary code.

An issue was discovered on D-Link DWR-116 through 1.06, DWR-512 through 2.02, DWR-712 through 2.02, DWR-912 through 2.02, DWR-921 through 2.02, and DWR-111 through 1.01 devices. An authenticated attacker may execute arbitrary code by injecting the shell command into the chkisg.htm page Sip parameter. This allows for full control over the device internals.

On D-Link DIR-550A and DIR-604M devices through v2.10KR, a malicious user can forge an HTTP request to inject operating system commands that can be executed on the device with higher privileges, aka remote code execution.

A vulnerability has been found in D-Link DWR-M961 1.1.36 and classified as critical. This vulnerability affects unknown code of the file /boafrm/formStaticDHCP of the component Authorization Interface. The manipulation of the argument Hostname leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.1.49 is able to address this issue. It is recommended to upgrade the affected component.

setSystemCommand on D-Link DCS-930L devices before 2.12 allows a remote attacker to execute code via an OS command in the SystemCommand parameter.

D-Link DIR-890L 1.20b01 allows attackers to execute arbitrary code due to the hardcoded option Wake-On-Lan for the parameter 'descriptor' at SetVirtualServerSettings.php

A command injection vulnerability in D-Link DIR-823X 240126 and 240802 allows an authorized attacker to execute arbitrary commands on remote devices by sending a POST request to /goform/set_prohibiting via the corresponding function, triggering remote command execution.

An issue was discovered on D-Link DIR-825 Rev.B 2.10 devices. They allow remote attackers to execute arbitrary commands via the wps_sta_enrollee_pin parameter in a set_sta_enrollee_pin.cgi POST request. TRENDnet TEW-632BRP 1.010B32 is also affected.

An issue was discovered on D-Link DIR-825 Rev.B 2.10 devices. They allow remote attackers to execute arbitrary commands via the ntp_server parameter in an ntp_sync.cgi POST request.

D-Link DAP-1360U before 3.0.1 devices allow remote authenticated users to execute arbitrary commands via shell metacharacters in the IP JSON value for ping (aka res_config_action=3&res_config_id=18).

D-Link DIR-846 devices with firmware 100.26 allow remote attackers to execute arbitrary code as root via a SetNetworkTomographySettings request by leveraging admin access.

An issue was discovered on D-Link DSR-250 3.17 devices. Certain functionality in the Unified Services Router web interface could allow an authenticated attacker to execute arbitrary commands, due to a lack of validation of inputs provided in multipart HTTP POST requests.

An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the twsystem function with untrusted input from the request body for the SetIPv6FirewallSettings API function, as demonstrated by shell metacharacters in the SrcIPv6AddressRangeStart field.

An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the twsystem function with untrusted input from the request body for the SetSysEmailSettings API function, as demonstrated by shell metacharacters in the SMTPServerPort field.

An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the twsystem function with untrusted input from the request body for the SetIPv4FirewallSettings API function, as demonstrated by shell metacharacters in the SrcIPv4AddressRangeStart field.

An issue was discovered on D-Link DCS-2530L before 1.06.01 Hotfix and DCS-2670L through 2.02 devices. cgi-bin/ddns_enc.cgi allows authenticated command injection.

A code execution vulnerability exists in the Libcli Test Environment functionality of D-LINK DIR-3040 1.13B03. A specially crafted network request can lead to arbitrary command execution. An attacker can send a sequence of requests to trigger this vulnerability.

An issue was discovered on D-Link DSR-250 3.17 devices. Insufficient validation of configuration file checksums could allow a remote, authenticated attacker to inject arbitrary crontab entries into saved configurations before uploading. These entries are executed as root.

An issue was discovered on D-Link DSL-3782 EU 1.01 devices. An authenticated user can pass a long buffer as a 'commit' parameter to the '/userfs/bin/tcapi' binary (in the Diagnostics component) using the 'commit <node_name>' function and cause memory corruption. Furthermore, it is possible to redirect the flow of the program and execute arbitrary code.

An issue was discovered on D-Link DSL-3782 EU 1.01 devices. An authenticated user can pass a long buffer as a 'show' parameter to the '/userfs/bin/tcapi' binary (in the Diagnostics component) using the 'show <node_name>' function and cause memory corruption. Furthermore, it is possible to redirect the flow of the program and execute arbitrary code.

A vulnerability has been found in D-Link DAR-7000 3.2 and classified as critical. This vulnerability affects the function get_ip_addr_details of the file /view/vpn/sxh_vpn/sxh_vpnlic.php of the component HTTP POST Request Handler. The manipulation of the argument ethname leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DIR-619L B1 2.06. It has been rated as critical. This issue affects the function formLogDnsquery of the file /goform/formLogDnsquery. The manipulation of the argument curTime leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability classified as critical was found in D-Link DIR-619L B1 2.06. Affected by this vulnerability is the function formVirtualServ of the file /goform/formVirtualServ. The manipulation of the argument curTime leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DIR-605L 2.13B01 BETA and classified as critical. This issue affects the function formSetWanPPTP of the file /goform/formSetWanPPTP. The manipulation of the argument webpage leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DIR-605L 2.13B01 BETA and classified as critical. This issue affects the function formEasySetupWizard/formEasySetupWizard2 of the file /goform/formEasySetupWizard. The manipulation of the argument curTime leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as critical, has been found in D-Link DIR-619L B1 2.06. This issue affects the function formAdvFirewall of the file /goform/formAdvFirewall. The manipulation of the argument curTime leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DIR-605L 2.13B01 BETA. It has been classified as critical. Affected is the function formWlanSetup of the file /goform/formWlanSetup. The manipulation of the argument webpage leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as critical, was found in D-Link DIR-619L B1 2.06. Affected is the function formAdvNetwork of the file /goform/formAdvNetwork. The manipulation of the argument curTime leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability has been found in D-Link DIR-619L B1 2.06 and classified as critical. Affected by this vulnerability is the function formSetMuti of the file /goform/formSetMuti. The manipulation of the argument curTime leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as critical, has been found in D-Link DIR-619L B1 2.06. Affected by this issue is the function formSetLog of the file /goform/formSetLog. The manipulation of the argument curTime leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DIR-605L 2.13B01 BETA. It has been classified as critical. Affected is the function formEasySetPassword of the file /goform/formEasySetPassword. The manipulation of the argument curTime leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DIR-605L 2.13B01 BETA. It has been declared as critical. Affected by this vulnerability is the function formSetWanL2TP of the file /goform/formSetWanL2TP. The manipulation of the argument webpage leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability has been found in D-Link DIR-619L B1 2.06 and classified as critical. Affected by this vulnerability is the function formEasySetPassword of the file /goform/formEasySetPassword. The manipulation of the argument curTime leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DIR-605L 2.13B01 BETA and classified as critical. This issue affects the function formDeviceReboot of the file /goform/formDeviceReboot. The manipulation of the argument next_page leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability classified as critical was found in D-Link DIR-619L B1 2.06. Affected by this vulnerability is the function formSetDDNS of the file /goform/formSetDDNS. The manipulation of the argument curTime leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability classified as critical has been found in D-Link DIR-605L 2.13B01 BETA. This affects the function formSetWAN_Wizard51/formSetWAN_Wizard52. The manipulation of the argument curTime leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as critical, has been found in D-Link DIR-605L 2.13B01 BETA. This issue affects the function formWlanSetup_Wizard of the file /goform/formWlanSetup_Wizard. The manipulation of the argument webpage leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as critical, was found in D-Link DIR-605L 2.13B01 BETA. This affects the function formSetEnableWizard of the file /goform/formSetEnableWizard. The manipulation of the argument curTime leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.