In the Linux kernel, the following vulnerability has been resolved: staging: media: atomisp: Fix stack buffer overflow in gmin_get_var_int() When gmin_get_config_var() calls efi.get_variable() and the EFI variable is larger than the expected buffer size, two behaviors combine to create a stack buffer overflow: 1. gmin_get_config_var() does not return the proper error code when efi.get_variable() fails. It returns the stale 'ret' value from earlier operations instead of indicating the EFI failure. 2. When efi.get_variable() returns EFI_BUFFER_TOO_SMALL, it updates *out_len to the required buffer size but writes no data to the output buffer. However, due to bug #1, gmin_get_var_int() believes the call succeeded. The caller gmin_get_var_int() then performs: - Allocates val[CFG_VAR_NAME_MAX + 1] (65 bytes) on stack - Calls gmin_get_config_var(dev, is_gmin, var, val, &len) with len=64 - If EFI variable is >64 bytes, efi.get_variable() sets len=required_size - Due to bug #1, thinks call succeeded with len=required_size - Executes val[len] = 0, writing past end of 65-byte stack buffer This creates a stack buffer overflow when EFI variables are larger than 64 bytes. Since EFI variables can be controlled by firmware or system configuration, this could potentially be exploited for code execution. Fix the bug by returning proper error codes from gmin_get_config_var() based on EFI status instead of stale 'ret' value. The gmin_get_var_int() function is called during device initialization for camera sensor configuration on Intel Bay Trail and Cherry Trail platforms using the atomisp camera stack.

Heap buffer overflow in UI in Google Chrome on Windows prior to 86.0.4240.183 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page.

Insufficient data validation in media in Google Chrome prior to 85.0.4183.121 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page.

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix the pre-flush when appending to a file in writethrough mode In netfs_perform_write(), when the file is marked NETFS_ICTX_WRITETHROUGH or O_*SYNC or RWF_*SYNC was specified, write-through caching is performed on a buffered file. When setting up for write-through, we flush any conflicting writes in the region and wait for the write to complete, failing if there's a write error to return. The issue arises if we're writing at or above the EOF position because we skip the flush and - more importantly - the wait. This becomes a problem if there's a partial folio at the end of the file that is being written out and we want to make a write to it too. Both the already-running write and the write we start both want to clear the writeback mark, but whoever is second causes a warning looking something like: ------------[ cut here ]------------ R=00000012: folio 11 is not under writeback WARNING: CPU: 34 PID: 654 at fs/netfs/write_collect.c:105 ... CPU: 34 PID: 654 Comm: kworker/u386:27 Tainted: G S ... ... Workqueue: events_unbound netfs_write_collection_worker ... RIP: 0010:netfs_writeback_lookup_folio Fix this by making the flush-and-wait unconditional. It will do nothing if there are no folios in the pagecache and will return quickly if there are no folios in the region specified. Further, move the WBC attachment above the flush call as the flush is going to attach a WBC and detach it again if it is not present - and since we need one anyway we might as well share it.

Use after free in printing in Google Chrome prior to 86.0.4240.111 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page.

A buffer overflow vulnerability in p_print_image() in devices/gdevcdj.c of Artifex Software GhostScript v9.50 allows a remote attacker to cause a denial of service via a crafted PDF file. This is fixed in v9.51.

Firefox was susceptible to a heap buffer overflow in `nsTextFragment` due to insufficient OOM handling. This vulnerability affects Firefox ESR < 115.6, Thunderbird < 115.6, and Firefox < 121.

Heap buffer overflow in storage in Google Chrome prior to 85.0.4183.121 allowed a remote attacker to potentially perform out of bounds memory access via a crafted HTML page.

A buffer overflow vulnerability in jetp3852_print_page() in devices/gdev3852.c of Artifex Software GhostScript v9.50 allows a remote attacker to cause a denial of service via a crafted PDF file. This is fixed in v9.51.

A buffer overflow vulnerability in image_render_color_thresh() in base/gxicolor.c of Artifex Software GhostScript v9.18 to v9.50 allows a remote attacker to escalate privileges via a crafted eps file. This is fixed in v9.51.

Inappropriate implementation in V8 in Google Chrome prior to 86.0.4240.75 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page.

A buffer overflow issue was addressed with improved memory handling. This issue is fixed in Safari 16, iOS 16, iOS 15.7 and iPadOS 15.7. Processing maliciously crafted web content may lead to arbitrary code execution.

A vulnerability was reported in the Open vSwitch sub-component in the Linux Kernel. The flaw occurs when a recursive operation of code push recursively calls into the code block. The OVS module does not validate the stack depth, pushing too many frames and causing a stack overflow. As a result, this can lead to a crash or other related issues.

An out-of-bounds write issue was addressed with improved bounds checking. This issue is fixed in iOS 15.6.1 and iPadOS 15.6.1, macOS Monterey 12.5.1, Safari 15.6.1. Processing maliciously crafted web content may lead to arbitrary code execution. Apple is aware of a report that this issue may have been actively exploited.

An issue was discovered in OpenEXR before v2.5.2. Invalid chunkCount attributes could cause a heap buffer overflow in getChunkOffsetTableSize() in IlmImf/ImfMisc.cpp.

In Tensorflow before versions 1.15.4, 2.0.3, 2.1.2, 2.2.1 and 2.3.1, the implementation of `SparseFillEmptyRowsGrad` uses a double indexing pattern. It is possible for `reverse_index_map(i)` to be an index outside of bounds of `grad_values`, thus resulting in a heap buffer overflow. The issue is patched in commit 390611e0d45c5793c7066110af37c8514e6a6c54, and is released in TensorFlow versions 1.15.4, 2.0.3, 2.1.2, 2.2.1, or 2.3.1.

In tensorflow-lite before versions 1.15.4, 2.0.3, 2.1.2, 2.2.1 and 2.3.1, if a TFLite saved model uses the same tensor as both input and output of an operator, then, depending on the operator, we can observe a segmentation fault or just memory corruption. We have patched the issue in d58c96946b and will release patch releases for all versions between 1.15 and 2.3. We recommend users to upgrade to TensorFlow 1.15.4, 2.0.3, 2.1.2, 2.2.1, or 2.3.1.

In tensorflow-lite before versions 1.15.4, 2.0.3, 2.1.2, 2.2.1 and 2.3.1, to mimic Python's indexing with negative values, TFLite uses `ResolveAxis` to convert negative values to positive indices. However, the only check that the converted index is now valid is only present in debug builds. If the `DCHECK` does not trigger, then code execution moves ahead with a negative index. This, in turn, results in accessing data out of bounds which results in segfaults and/or data corruption. The issue is patched in commit 2d88f470dea2671b430884260f3626b1fe99830a, and is released in TensorFlow versions 1.15.4, 2.0.3, 2.1.2, 2.2.1, or 2.3.1.

Stack-based Buffer Overflow in GitHub repository vim/vim prior to 9.0.0598.

In SQLite before 3.32.3, select.c mishandles query-flattener optimization, leading to a multiSelectOrderBy heap overflow because of misuse of transitive properties for constant propagation.

In Tensorflow before versions 1.15.4, 2.0.3, 2.1.2, 2.2.1 and 2.3.1, the `data_splits` argument of `tf.raw_ops.StringNGrams` lacks validation. This allows a user to pass values that can cause heap overflow errors and even leak contents of memory In the linked code snippet, all the binary strings after `ee ff` are contents from the memory stack. Since these can contain return addresses, this data leak can be used to defeat ASLR. The issue is patched in commit 0462de5b544ed4731aa2fb23946ac22c01856b80, and is released in TensorFlow versions 1.15.4, 2.0.3, 2.1.2, 2.2.1, or 2.3.1.

In TensorFlow Lite before versions 1.15.4, 2.0.3, 2.1.2, 2.2.1 and 2.3.1, saved models in the flatbuffer format use a double indexing scheme: a model has a set of subgraphs, each subgraph has a set of operators and each operator has a set of input/output tensors. The flatbuffer format uses indices for the tensors, indexing into an array of tensors that is owned by the subgraph. This results in a pattern of double array indexing when trying to get the data of each tensor. However, some operators can have some tensors be optional. To handle this scenario, the flatbuffer model uses a negative `-1` value as index for these tensors. This results in special casing during validation at model loading time. Unfortunately, this means that the `-1` index is a valid tensor index for any operator, including those that don't expect optional inputs and including for output tensors. Thus, this allows writing and reading from outside the bounds of heap allocated arrays, although only at a specific offset from the start of these arrays. This results in both read and write gadgets, albeit very limited in scope. The issue is patched in several commits (46d5b0852, 00302787b7, e11f5558, cd31fd0ce, 1970c21, and fff2c83), and is released in TensorFlow versions 1.15.4, 2.0.3, 2.1.2, 2.2.1, or 2.3.1. A potential workaround would be to add a custom `Verifier` to the model loading code to ensure that only operators which accept optional inputs use the `-1` special value and only for the tensors that they expect to be optional. Since this allow-list type approach is erro-prone, we advise upgrading to the patched code.

Multiple heap-based buffer overflows in the cirrus_invalidate_region function in the Cirrus VGA extension in QEMU 0.8.2, as used in Xen and possibly other products, might allow local users to execute arbitrary code via unspecified vectors related to "attempting to mark non-existent regions as dirty," aka the "bitblt" heap overflow.

In tensorflow-lite before versions 1.15.4, 2.0.3, 2.1.2, 2.2.1 and 2.3.1, when determining the common dimension size of two tensors, TFLite uses a `DCHECK` which is no-op outside of debug compilation modes. Since the function always returns the dimension of the first tensor, malicious attackers can craft cases where this is larger than that of the second tensor. In turn, this would result in reads/writes outside of bounds since the interpreter will wrongly assume that there is enough data in both tensors. The issue is patched in commit 8ee24e7949a203d234489f9da2c5bf45a7d5157d, and is released in TensorFlow versions 1.15.4, 2.0.3, 2.1.2, 2.2.1, or 2.3.1.

An issue was discovered in LibVNCServer before 0.9.13. libvncserver/corre.c allows out-of-bounds access via encodings.

An issue was discovered in FreeRDP before 2.1.1. An out-of-bounds (OOB) write vulnerability has been detected in crypto_rsa_common in libfreerdp/crypto/crypto.c.

A flaw was found in the Linux kernel’s implementation of the invert video code on VGA consoles when a local attacker attempts to resize the console, calling an ioctl VT_RESIZE, which causes an out-of-bounds write to occur. This flaw allows a local user with access to the VGA console to crash the system, potentially escalating their privileges on the system. The highest threat from this vulnerability is to data confidentiality and integrity as well as system availability.

An out-of-bounds read/write access flaw was found in the USB emulator of the QEMU in versions before 5.2.0. This issue occurs while processing USB packets from a guest when USBDevice 'setup_len' exceeds its 'data_buf[4096]' in the do_token_in, do_token_out routines. This flaw allows a guest user to crash the QEMU process, resulting in a denial of service, or the potential execution of arbitrary code with the privileges of the QEMU process on the host.

PJSIP is a free and open source multimedia communication library written in C. Versions 2.12 and prior contain a stack buffer overflow vulnerability that affects PJSUA2 users or users that call the API `pjmedia_sdp_print(), pjmedia_sdp_media_print()`. Applications that do not use PJSUA2 and do not directly call `pjmedia_sdp_print()` or `pjmedia_sdp_media_print()` should not be affected. A patch is available on the `master` branch of the `pjsip/pjproject` GitHub repository. There are currently no known workarounds.

An integer overflow in the getnum function in lua_struct.c in Redis before 6.0.3 allows context-dependent attackers with permission to run Lua code in a Redis session to cause a denial of service (memory corruption and application crash) or possibly bypass intended sandbox restrictions via a large number, which triggers a stack-based buffer overflow. NOTE: this issue exists because of a CVE-2015-8080 regression.

A heap-based buffer overflow in the hxxx_AnnexB_to_xVC function in modules/packetizer/hxxx_nal.c in VideoLAN VLC media player before 3.0.11 for macOS/iOS allows remote attackers to cause a denial of service (application crash) or execute arbitrary code via a crafted H.264 Annex-B video (.avi for example) file.

A vulnerability was found in upstream release cryptsetup-2.2.0 where, there's a bug in LUKS2 format validation code, that is effectively invoked on every device/image presenting itself as LUKS2 container. The bug is in segments validation code in file 'lib/luks2/luks2_json_metadata.c' in function hdr_validate_segments(struct crypt_device *cd, json_object *hdr_jobj) where the code does not check for possible overflow on memory allocation used for intervals array (see statement "intervals = malloc(first_backup * sizeof(*intervals));"). Due to the bug, library can be *tricked* to expect such allocation was successful but for far less memory then originally expected. Later it may read data FROM image crafted by an attacker and actually write such data BEYOND allocated memory.

A flaw was found in the Linux kernel before 5.9-rc4. Memory corruption can be exploited to gain root privileges from unprivileged processes. The highest threat from this vulnerability is to data confidentiality and integrity.

An out-of-bounds memory write flaw was found in how the Linux kernel’s Voice Over IP H.323 connection tracking functionality handled connections on ipv6 port 1720. This flaw allows an unauthenticated remote user to crash the system, causing a denial of service. The highest threat from this vulnerability is to confidentiality, integrity, as well as system availability.

SDL (Simple DirectMedia Layer) through 2.0.12 has an Integer Overflow (and resultant SDL_memcpy heap corruption) in SDL_BlitCopy in video/SDL_blit_copy.c via a crafted .BMP file.

In QEMU 5.0.0 and earlier, es1370_transfer_audio in hw/audio/es1370.c does not properly validate the frame count, which allows guest OS users to trigger an out-of-bounds access during an es1370_write() operation.

An out-of-bounds memory write flaw was found in the Linux kernel’s Transport Layer Security functionality in how a user calls a function splice with a ktls socket as the destination. This flaw allows a local user to crash or potentially escalate their privileges on the system.

An issue was discovered in LibVNCServer before 0.9.13. libvncserver/hextile.c allows out-of-bounds access via encodings.

When curl < 7.84.0 does FTP transfers secured by krb5, it handles message verification failures wrongly. This flaw makes it possible for a Man-In-The-Middle attack to go unnoticed and even allows it to inject data to the client.

An issue was discovered in LibVNCServer before 0.9.13. libvncserver/rre.c allows out-of-bounds access via encodings.

rom_copy() in hw/core/loader.c in QEMU 4.0 and 4.1.0 does not validate the relationship between two addresses, which allows attackers to trigger an invalid memory copy operation.

FFmpeg before 2017-02-04 has an out-of-bounds write caused by a heap-based buffer overflow related to the decode_frame_common function in libavcodec/pngdec.c.

Heap-based Buffer Overflow in GitHub repository vim/vim prior to 9.0.0483.

FFmpeg before 2017-01-24 has an out-of-bounds write caused by a heap-based buffer overflow related to the ipvideo_decode_block_opcode_0xA function in libavcodec/interplayvideo.c and the avcodec_align_dimensions2 function in libavcodec/utils.c.