The RNDIS USB device class includes a buffer overflow vulnerability. Zephyr versions >= v2.6.0 contain Heap-based Buffer Overflow (CWE-122). For more information, see https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-hvfp-w4h8-gxvj

The arm platform-specific code uses a signed integer comparison when validating system call numbers. An attacker who has obtained code execution within a user thread is able to elevate privileges to that of the kernel. See NCC-ZEP-001 This issue affects: zephyrproject-rtos zephyr version 1.14.0 and later versions. version 2.1.0 and later versions.

A malicious userspace application can cause a integer overflow and bypass security checks performed by system call handlers. The impact would depend on the underlying system call and can range from denial of service to information leak to memory corruption resulting in code execution within the kernel. See NCC-ZEP-005 This issue affects: zephyrproject-rtos zephyr version 1.14.1 and later versions. version 2.1.0 and later versions.

An attacker who has obtained code execution within a user thread is able to elevate privileges to that of the kernel. See NCC-ZEP-001 This issue affects: zephyrproject-rtos zephyr version 1.14.0 and later versions. version 2.1.0 and later versions.

Buffer Access with Incorrect Length Value in zephyr. Zephyr versions >= >=2.5.0 contain Buffer Access with Incorrect Length Value (CWE-805). For more information, see https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-8q65-5gqf-fmw5

An integer underflow in bt_mesh_sol_recv() in the Bluetooth Mesh solicitation handling (subsys/bluetooth/mesh/solicitation.c) leads to an out-of-bounds write. When CONFIG_BT_MESH_OD_PRIV_PROXY_SRV is enabled, the function parses solicitation PDUs from raw BLE advertising payloads. The AD parsing loop reads an attacker-controlled length byte (reported_len) and computes reported_len - 3 without checking that reported_len >= 3. When reported_len is less than 3, the subtraction is performed in signed int arithmetic and yields a negative value that bypasses the length guard and is then implicitly converted to a very large size_t when passed to net_buf_simple_pull_mem(). In builds without assertions, this wraps the buffer length and advances the data pointer far out of bounds, so subsequent reads dereference invalid memory. A nearby BLE device can trigger this with a non-connectable advertisement carrying a UUID16 AD structure and a crafted length byte, with no pairing or prior association required, potentially leading to denial of service or arbitrary code execution.

FS: Buffer Overflow when enabling Long File Names in FAT_FS and calling fs_stat. Zephyr versions >= v1.14.2, >= v2.3.0 contain Stack-based Buffer Overflow (CWE-121). For more information, see https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-7fhv-rgxr-x56h

A remote, unauthenticated attacker can trigger memory corruption in Zephyr's HTTP server WebSocket upgrade path by sending a crafted Sec-WebSocket-Key header. The HTTP/1 header parser copies the header into a fixed-size buffer using a bounded copy that does not guarantee NUL termination when the input length reaches the buffer size. During upgrade handling the buffer is copied to a local stack buffer and passed to strlen(); if no NUL exists in-bounds, strlen() reads beyond the stack buffer and subsequent concatenation with the WebSocket magic string can write out of bounds. This leads to out-of-bounds read and write on stack memory, resulting in crash (denial of service) and potentially code execution. The path is reachable when CONFIG_HTTP_SERVER_WEBSOCKET is enabled.

Unchecked length coming from user input in settings shell

can: out of bounds in remove_rx_filter function

No proper validation of the length of user input in olcp_ind_handler in zephyr/subsys/bluetooth/services/ots/ots_client.c.

Possible variant of CVE-2021-3434 in function le_ecred_reconf_req.

Out-of-bounds Write in the USB Mass Storage memoryWrite handler with unaligned Sizes See NCC-ZEP-024, NCC-ZEP-025, NCC-ZEP-026 This issue affects: zephyrproject-rtos zephyr version 1.14.1 and later versions. version 2.1.0 and later versions.

Missing Size Checks in Bluetooth HCI over SPI. Zephyr versions >= v1.14.2, >= v2.2.0 contain Improper Handling of Length Parameter Inconsistency (CWE-130). For more information, see https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-hg2w-62p6-g67c

Improper handling of the full-buffer case in the Zephyr Bluetooth implementation can result in memory corruption. This issue affects: zephyrproject-rtos zephyr version 2.2.0 and later versions, and version 1.14.0 and later versions.

Improper Input Frame Validation in ieee802154 Processing. Zephyr versions >= v1.14.2, >= v2.2.0 contain Stack-based Buffer Overflow (CWE-121), Heap-based Buffer Overflow (CWE-122). For more information, see https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-3gvq-h42f-v3c7

BT: Classic: SDP OOB access in get_att_search_list

BT: HCI: adv_ext_report Improper discarding in adv_ext_report

In subsys/net/ip/tcp.c , function tcp_flags , when the incoming parameter flags is ECN or CWR , the buf will out-of-bounds write a byte zero.

In Zephyr bluetooth mesh core stack, an out-of-bound write vulnerability can be triggered during provisioning.

Potential buffer overflow vulnerabilities n the Zephyr Bluetooth subsystem.

usb device bluetooth class includes a buffer overflow related to implementation of net_buf_add_mem.

Buffer overflow in usb device class. Zephyr versions >= v2.6.0 contain Heap-based Buffer Overflow (CWE-122). For more information, see https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-fm6v-8625-99jf

A remote, unauthenticated BLE peer can trigger a 2-byte out-of-bounds write in the Bluetooth host during L2CAP LE CoC SDU reassembly. When the application enables segmentation (via chan_ops.alloc_buf) and the chosen RX pool has a user_data_size smaller than 2 bytes, the segmentation counter stored in the net_buf user_data area is written out of bounds in l2cap_chan_le_recv_seg (subsys/bluetooth/host/l2cap.c). The observed effects are an AddressSanitizer abort and, without ASan, heap corruption / fatal error.

A potential out-of-bounds write/read exists in the TLS socket connect path of the network sockets subsystem (subsys/net/lib/sockets/sockets_tls.c). When the TLS session cache is enabled, tls_session_store() and tls_session_restore() memcpy the caller-supplied address into a fixed-size buffer using the caller-controlled addrlen value without validating it against the destination size. struct net_sockaddr is an opaque type, so an application can pass an addrlen larger than sizeof(struct net_sockaddr) (for example 128 bytes into a 24-byte stack buffer), causing the memcpy to read and write past the end of the address memory used by the TLS session cache. This out-of-bounds write can lead to a crash and denial of service, and potentially to arbitrary code execution.

Buffer overflow in Zephyr USB DFU DNLOAD. Zephyr versions >= v2.5.0 contain Heap-based Buffer Overflow (CWE-122). For more information, see https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-c3gr-hgvr-f363

Stack based buffer overflow in le_ecred_conn_req(). Zephyr versions >= v2.5.0 Stack-based Buffer Overflow (CWE-121). For more information, see https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-8w87-6rfp-cfrm

RCE/DOS: Linked-list corruption leading to large out-of-bounds write while sorting for forged fragment list in Zephyr. Zephyr versions >= >=2.4.0 contain Out-of-bounds Write (CWE-787). For more information, see https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-fj4r-373f-9456

Potential buffer overflow vulnerability in the Zephyr CAN bus subsystem

The bluetooth HCI host layer logic not clearing a global reference to a semaphore after synchronously sending HCI commands may allow a malicious HCI Controller to cause the use of a dangling reference in the host layer, leading to a crash (DoS) or potential RCE on the Host layer.

dns_unpack_name() caches the buffer tailroom once and reuses it while appending DNS labels. As the buffer grows, the cached size becomes incorrect, and the final null terminator can be written past the buffer. With assertions disabled (default), a malicious DNS response can trigger an out-of-bounds write when CONFIG_DNS_RESOLVER is enabled.

Zephyr's Bluetooth Classic Hands-Free Profile (HFP) Hands-Free role parser (subsys/bluetooth/host/classic/hfp_hf.c) contains an out-of-bounds write. During Service Level Connection setup the HF sends AT+CIND=? and parses the AG's +CIND: response in cind_handle(), which assigns a per-entry counter index and calls cind_handle_values() for each list element. cind_handle_values() then wrote hf-ind_table[index] = i without verifying that index is within the 20-element int8_t ind_table[] array of struct bt_hfp_hf. Because the parser places no cap on the number of +CIND: list entries, a remote Attendant Gateway (a malicious, compromised, or spoofed peer the device connects to over Bluetooth) can send a response with more than 20 recognized indicator entries and drive index arbitrarily large, writing a small attacker-positioned value past the array into adjacent struct fields (feature masks, SDP/version state, the calls[] array, work/atomic bookkeeping) and potentially beyond the static connection pool slot. This yields memory corruption and at least denial of service of the Bluetooth host, triggered by a single malformed AT response with no user interaction. The sibling consumer ag_indicator_handle_values() already performed the equivalent bounds check; this commit adds the same index = ARRAY_SIZE(hf-ind_table) guard to close the gap. Affects builds with CONFIG_BT_HFP_HF enabled; introduced with the original HFP HF CIND parser (~v1.7) and present through v4.4.0.

In gnss service, there is a possible out of bounds write due to an incorrect bounds check. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS10010441; Issue ID: MSV-3967.

In DA, there is a possible out of bounds write due to a missing bounds check. This could lead to local escalation of privilege, if an attacker has physical access to the device, with no additional execution privileges needed. User interaction is needed for exploitation. Patch ID: ALPS09915215; Issue ID: MSV-3801.

In gnss service, there is a possible out of bounds write due to an incorrect bounds check. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS10010443; Issue ID: MSV-3966.

BT:Classic: Multiple missing buf length checks

In utf8_trunc in zephyr/lib/utils/utf8.c, last_byte_p can point to one byte before the string pointer if the string is empty.

In ascs_cp_rsp_add in /subsys/bluetooth/audio/ascs.c, an unchecked tailroom could lead to a global buffer overflow.

BT: Unchecked user input in bap_broadcast_assistant

BT: Missing length checks of net_buf in rfcomm_handle_data

No proper validation of the length of user input in olcp_ind_handler in zephyr/subsys/bluetooth/services/ots/ots_client.c.

In Zephyr bluetooth mesh core stack, an out-of-bound write vulnerability can be triggered during provisioning.

This vulnerability allows local attackers to escalate privileges on Jungo WinDriver 12.4.0 and earlier. An attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. The specific flaw exists within the processing of IOCTL 0x953824a7 by the windrvr1240 kernel driver. The issue lies in the failure to properly validate user-supplied data which can result in an out-of-bounds write condition. An attacker can leverage this vulnerability to execute arbitrary code under the context of kernel.

A flaw was found in the Linux kernel before 5.9-rc4. Memory corruption can be exploited to gain root privileges from unprivileged processes. The highest threat from this vulnerability is to data confidentiality and integrity.

A flaw was found in the Linux kernel’s implementation of the invert video code on VGA consoles when a local attacker attempts to resize the console, calling an ioctl VT_RESIZE, which causes an out-of-bounds write to occur. This flaw allows a local user with access to the VGA console to crash the system, potentially escalating their privileges on the system. The highest threat from this vulnerability is to data confidentiality and integrity as well as system availability.

An insufficient input validation in the AMD Graphics Driver for Windows 10 may allow unprivileged users to unload the driver, potentially causing memory corruptions in high privileged processes, which can lead to escalation of privileges or denial of service.

An elevation of privilege vulnerability exists when the Windows Kernel API improperly handles registry objects in memory. An attacker who successfully exploited the vulnerability could gain elevated privileges on a targeted system. A locally authenticated attacker could exploit this vulnerability by running a specially crafted application. The security update addresses the vulnerability by helping to ensure that the Windows Kernel API properly handles objects in memory.

An issue was discovered on certain Fujitsu LIEFBOOK devices (A3510, U9310, U7511/U7411/U7311, U9311, E5510/E5410, U7510/U7410/U7310, E459/E449) with BIOS versions before v1.09 (A3510), v2.17 (U9310), v2.30 (U7511/U7411/U7311), v2.33 (U9311), v2.23 (E5510), v2.19 (U7510/U7410), v2.13 (U7310), and v1.09 (E459/E449). The FjGabiFlashCoreAbstractionSmm driver registers a Software System Management Interrupt (SWSMI) handler that is not sufficiently validated to ensure that the CommBuffer (or any other communication buffer's nested contents) are not pointing to SMRAM contents. A potential attacker can therefore write fixed data to SMRAM, which could lead to data corruption inside this memory (e.g., change the SMI handler's code or modify SMRAM map structures to break input pointer validation for other SMI handlers). Thus, the attacker could elevate privileges from ring 0 to ring -2 and execute arbitrary code in SMM.

An issue was discovered in the Linux kernel before 5.6.7. xdp_umem_reg in net/xdp/xdp_umem.c has an out-of-bounds write (by a user with the CAP_NET_ADMIN capability) because of a lack of headroom validation.

Heap-based buffer overflow in QEMU 0.8.2, as used in Xen and possibly other products, allows local users to execute arbitrary code via crafted data in the "net socket listen" option, aka QEMU "net socket" heap overflow. NOTE: some sources have used CVE-2007-1321 to refer to this issue as part of "NE2000 network driver and the socket code," but this is the correct identifier for the individual net socket listen vulnerability.