A cross-site scripting issue has been found in the web interface of PowerDNS Recursor from 4.0.0 up to and including 4.0.6, where the qname of DNS queries was displayed without any escaping, allowing a remote attacker to inject HTML and Javascript code into the web interface, altering the content.

An issue has been found in PowerDNS before 3.4.11 and 4.0.2, and PowerDNS recursor before 4.0.4, allowing an attacker in position of man-in-the-middle to alter the content of an AXFR because of insufficient validation of TSIG signatures. A missing check of the TSIG time and fudge values was found in AXFRRetriever, leading to a possible replay attack.

An issue has been found in PowerDNS before 3.4.11 and 4.0.2, and PowerDNS recursor before 4.0.4, allowing an attacker in position of man-in-the-middle to alter the content of an AXFR because of insufficient validation of TSIG signatures. A missing check that the TSIG record is the last one, leading to the possibility of parsing records that are not covered by the TSIG signature.

An issue has been found in the DNSSEC validation component of PowerDNS Recursor from 4.0.0 and up to and including 4.0.6, where the signatures might have been accepted as valid even if the signed data was not in bailiwick of the DNSKEY used to sign it. This allows an attacker in position of man-in-the-middle to alter the content of records by issuing a valid signature for the crafted records.

An issue has been found in PowerDNS DNSDist before 1.3.3 allowing a remote attacker to craft a DNS query with trailing data such that the addition of a record by dnsdist, for example an OPT record when adding EDNS Client Subnet, might result in the trailing data being smuggled to the backend as a valid record while not seen by dnsdist. This is an issue when dnsdist is deployed as a DNS Firewall and used to filter some records that should not be received by the backend. This issue occurs only when either the 'useClientSubnet' or the experimental 'addXPF' parameters are used when declaring a new backend.

An issue has been found in the API component of PowerDNS Authoritative 4.x up to and including 4.0.4 and 3.x up to and including 3.4.11, where some operations that have an impact on the state of the server are still allowed even though the API has been configured as read-only via the api-readonly keyword. This missing check allows an attacker with valid API credentials to flush the cache, trigger a zone transfer or send a NOTIFY.

The Float Payment Gateway plugin for WordPress is vulnerable to unauthorized modification of data due to improper error handling in the verifyFloatResponse() function in all versions up to, and including, 1.1.9. This makes it possible for unauthenticated attackers to mark any WooCommerce order as failed.

Applications using the “Sensitive Headers” functionality in Spring Cloud Netflix Zuul 2.2.6.RELEASE and below may be vulnerable to bypassing the “Sensitive Headers” restriction when executing requests with specially constructed URLs. Applications that use Spring Security's StrictHttpFirewall (enabled by default for all URLs) are not affected by the vulnerability, as they reject requests that allow bypassing.

An issue has been discovered in GitLab EE affecting all versions from 18.1 before 18.3.6, 18.4 before 18.4.4, and 18.5 before 18.5.2 that, under certain circumstances, could have allowed an attacker to remove Duo flows of another user.

A logic issue was addressed with improved restrictions. This issue is fixed in macOS Big Sur 11.1, Security Update 2020-001 Catalina, Security Update 2020-007 Mojave, macOS Big Sur 11.0.1. A sandboxed process may be able to circumvent sandbox restrictions.

The JobSearch WP Job Board plugin for WordPress is vulnerable to authorization bypass due to a missing capability check on the save_locsettings function in versions up to, and including, 1.8.1. This makes it possible for unauthenticated attackers to change the settings of the plugin.

Mastodon is a free, open-source social network server based on ActivityPub. Mastodon allows server administrators to suspend remote users to prevent interactions. However, some logic errors allow already-known posts from such suspended users to appear in timelines if boosted. Furthermore, under certain circumstances, previously-unknown posts from suspended users can be processed. This issue allows old posts from suspended users to occasionally end up on timelines on all Mastodon versions. Additionally, on Mastodon versions from v4.5.0 to v4.5.4, v4.4.5 to v4.4.11, v4.3.13 to v4.3.17, and v4.2.26 to v4.2.29, remote suspended users can partially bypass the suspension to get new posts in. Mastodon versions v4.5.5, v4.4.12, v4.3.18 are patched.

BigBlueButton through 2.2.28 records a video meeting despite the deactivation of video recording in the user interface. This may result in data storage beyond what is authorized for a specific meeting topic or participant.

A security flaw has been discovered in Zhong Bang CRMEB up to 5.6.3. This vulnerability affects unknown code of the file crmeb/app/api/controller/v1/CrontabController.php of the component crontab Endpoint. The manipulation results in missing authorization. The attack can be launched remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

Insufficient Policy Enforcement in Omnibox in Google Chrome prior to 58.0.3029.81 for Mac, Windows, and Linux, and 58.0.3029.83 for Android, allowed a remote attacker to perform domain spoofing via IDN homographs in a crafted domain name.

Evmos is the Ethereum Virtual Machine (EVM) Hub on the Cosmos Network. Users are able to delegate tokens that have not yet been vested. This affects employees and grantees who have funds managed via `ClawbackVestingAccount`. This affects 18.1.0 and earlier.

The Templately plugin for WordPress is vulnerable to Arbitrary File Write in all versions up to, and including, 3.4.8. This is due to inadequate input validation in the `save_template_to_file()` function where user-controlled parameters like `session_id`, `content_id`, and `ai_page_ids` are used to construct file paths without proper sanitization. This makes it possible for unauthenticated attackers to write arbitrary `.ai.json` files to locations within the uploads directory.

An access control issue in ZKTeco BioAccess IVS v3.3.1 allows unauthenticated attackers to arbitrarily close and open the doors managed by the platform remotely via sending a crafted web request.

Insufficient policy enforcement in cookies in Google Chrome prior to 91.0.4472.77 allowed a remote attacker to bypass cookie policy via a crafted HTML page.

When styling and rendering an oversized `<select>` element, Firefox did not apply correct clipping which allowed an attacker to paint over the user interface. This vulnerability affects Firefox < 89.

Insufficient policy enforcement in content security policy in Google Chrome prior to 91.0.4472.77 allowed a remote attacker to bypass content security policy via a crafted HTML page.

Insufficient policy enforcement in PopupBlocker in Google Chrome prior to 91.0.4472.77 allowed a remote attacker to bypass navigation restrictions via a crafted iframe.

Insufficient policy enforcement in iFrameSandbox in Google Chrome prior to 91.0.4472.77 allowed a remote attacker to bypass navigation restrictions via a crafted HTML page.

When a user has already allowed a website to access microphone and camera, disabling camera sharing would not fully prevent the website from re-enabling it without an additional prompt. This was only possible if the website kept recording with the microphone until re-enabling the camera. This vulnerability affects Firefox < 89.

If the upload course tool in Moodle was used to delete an enrollment method which did not exist or was not already enabled, the tool would erroneously enable that enrollment method. This could lead to unintended users gaining access to the course. Versions affected: 3.9 to 3.9.2, 3.8 to 3.8.5, 3.7 to 3.7.8, 3.5 to 3.5.14 and earlier unsupported versions. This is fixed in moodle 3.9.3, 3.8.6, 3.7.9, 3.5.15, and 3.10.

An issue was discovered in Laravel before 6.18.35 and 7.x before 7.24.0. The $guarded property is mishandled in some situations involving requests with JSON column nesting expressions.

Pion WebRTC before 3.0.15 didn't properly tear down the DTLS Connection when certificate verification failed. The PeerConnectionState was set to failed, but a user could ignore that and continue to use the PeerConnection. )A WebRTC implementation shouldn't allow the user to continue if verification has failed.)

On Arista Strata family products which have “TCAM profile” feature enabled when Port IPv4 access-list has a rule which matches on “vxlan” as protocol then that rule and subsequent rules ( rules declared after it in ACL ) do not match on IP protocol field as expected.

An issue was discovered in Joomla! 3.0.0 through 3.9.24. Incorrect ACL checks could allow unauthorized change of the category for an article.

The OpenTelemetry Collector module AWS firehose receiver is for ingesting AWS Kinesis Data Firehose delivery stream messages and parsing the records received based on the configured record type. `awsfirehosereceiver` allows unauthenticated remote requests, even when configured to require a key. OpenTelemetry Collector can be configured to receive CloudWatch metrics via an AWS Firehose Stream. Firehose sets the header `X-Amz-Firehose-Access-Key` with an arbitrary configured string. The OpenTelemetry Collector awsfirehosereceiver can optionally be configured to require this key on incoming requests. However, when this is configured it **still accepts incoming requests with no key**. Only OpenTelemetry Collector users configured with the “alpha” `awsfirehosereceiver` module are affected. This module was added in version v0.49.0 of the “Contrib” distribution (or may be included in custom builds). There is a risk of unauthorized users writing metrics. Carefully crafted metrics could hide other malicious activity. There is no risk of exfiltrating data. It’s likely these endpoints will be exposed to the public internet, as Firehose does not support private HTTP endpoints. A fix was introduced in PR #34847 and released with v0.108.0. All users are advised to upgrade. There are no known workarounds for this vulnerability.

The Comments Like Dislike WordPress plugin before 1.1.4 allows users to like/dislike posted comments, however does not prevent them from replaying the AJAX request to add a like. This allows any user (even unauthenticated) to add unlimited like/dislike to any comment. The plugin appears to have some Restriction modes, such as Cookie Restriction, IP Restrictions, Logged In User Restriction, however, they do not prevent such attack as they only check client side

The Stylish Price List WordPress plugin before 6.9.0 does not perform capability checks in its spl_upload_ser_img AJAX action (available to both unauthenticated and authenticated users), which could allow unauthenticated users to upload images.

The optinmonster plugin before 1.1.4.6 for WordPress has incorrect access control for shortcodes because of a nonce leak.

Insufficient policy enforcement in navigations in Google Chrome prior to 89.0.4389.72 allowed a remote attacker who had compromised the renderer process to bypass navigation restrictions via a crafted HTML page.

Red is a fully modular Discord bot. Due to a bug in Red's Core API, 3rd-party cogs using the `@commands.can_manage_channel()` command permission check without additional permission controls may authorize a user to run a command even when that user doesn't have permissions to manage a channel. None of the core commands or core cogs are affected. The maintainers of the project are not aware of any _public_ 3rd-party cog utilizing this API at the time of writing this advisory. The problem was patched and released in version 3.5.10.

Insufficient policy enforcement in extensions in Google Chrome prior to 90.0.4430.93 allowed an attacker who convinced a user to install a malicious extension to bypass navigation restrictions via a crafted Chrome Extension.

Insufficient policy enforcement in QR scanning in Google Chrome on iOS prior to 89.0.4389.72 allowed an attacker who convinced the user to scan a QR code to bypass navigation restrictions via a crafted QR code.

When creating a user account, it was possible to verify the account without having access to the verification email link/secret in moodle before 3.10.2, 3.9.5, 3.8.8, 3.5.17.

A call termination issue with was addressed with improved logic. This issue is fixed in iOS 14.5 and iPadOS 14.5. A legacy cellular network can automatically answer an incoming call when an ongoing call ends or drops. .

A logic issue was addressed with improved validation. This issue is fixed in Safari 13.0.5. A URL scheme may be incorrectly ignored when determining multimedia permission for a website.

Adobe Commerce versions 2.4.7, 2.4.6-p5, 2.4.5-p7, 2.4.4-p8 and earlier are affected by an Incorrect Authorization vulnerability that could result in a security feature bypass. An attacker could exploit this vulnerability to gain unauthorized access or perform actions with the privileges of another user. Exploitation of this issue does not require user interaction.

A vulnerability in the web services interface of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass a configured access rule and access parts of the WebVPN portal that are supposed to be blocked. The vulnerability is due to insufficient validation of URLs when portal access rules are configured. An attacker could exploit this vulnerability by accessing certain URLs on the affected device.

Vulnerability in the Oracle Java SE, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: CORBA). Supported versions that are affected are Oracle Java SE: 8u381, 8u381-perf; Oracle GraalVM Enterprise Edition: 20.3.11 and 21.3.7. Easily exploitable vulnerability allows unauthenticated attacker with network access via CORBA to compromise Oracle Java SE, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle Java SE, Oracle GraalVM Enterprise Edition accessible data. Note: This vulnerability can only be exploited by supplying data to APIs in the specified Component without using Untrusted Java Web Start applications or Untrusted Java applets, such as through a web service. CVSS 3.1 Base Score 5.3 (Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N).

A vulnerability in the access control list (ACL) functionality of the standby route processor management interface of Cisco IOS XR Software could allow an unauthenticated, remote attacker to reach the configured IP addresses on the standby route processor management Gigabit Ethernet Management interface. The vulnerability is due to a logic error that was introduced in the Cisco IOS XR Software, which prevents the ACL from working when applied against the standby route processor management interface. An attacker could exploit this vulnerability by attempting to access the device through the standby route processor management interface.

By holding a reference to the eval() function from an about:blank window, a malicious webpage could have gained access to the InstallTrigger object which would allow them to prompt the user to install an extension. Combined with user confusion, this could result in an unintended or malicious extension being installed. This vulnerability affects Firefox < 80, Thunderbird < 78.2, Thunderbird < 68.12, Firefox ESR < 68.12, Firefox ESR < 78.2, and Firefox for Android < 80.

In express-jwt (NPM package) up and including version 5.3.3, the algorithms entry to be specified in the configuration is not being enforced. When algorithms is not specified in the configuration, with the combination of jwks-rsa, it may lead to authorization bypass. You are affected by this vulnerability if all of the following conditions apply: - You are using express-jwt - You do not have **algorithms** configured in your express-jwt configuration. - You are using libraries such as jwks-rsa as the **secret**. You can fix this by specifying **algorithms** in the express-jwt configuration. See linked GHSA for example. This is also fixed in version 6.0.0.

The typo3_forum extension before 1.2.1 for TYPO3 has Incorrect Access Control.

mod_lua.c in the mod_lua module in the Apache HTTP Server 2.3.x and 2.4.x through 2.4.10 does not support an httpd configuration in which the same Lua authorization provider is used with different arguments within different contexts, which allows remote attackers to bypass intended access restrictions in opportunistic circumstances by leveraging multiple Require directives, as demonstrated by a configuration that specifies authorization for one group to access a certain directory, and authorization for a second group to access a second directory.

Insufficient policy enforcement in extensions API in Google Chrome prior to 75.0.3770.80 allowed an attacker who convinced a user to install a malicious extension to bypass restrictions on file URIs via a crafted Chrome Extension.

Insufficient data validation in CORS in Google Chrome prior to 76.0.3809.87 allowed an attacker who convinced a user to install a malicious extension to bypass content security policy via a crafted Chrome Extension.