Juniper Networks Secure Access 2000 5.5 R1 (build 11711) allows remote attackers to obtain sensitive information via a direct request for remediate.cgi without certain parameters, which reveals the path in an "Execute failed" error message.

Juniper Networks Junos OS uses the 128.0.0.0/2 subnet for internal communications between the RE and PFEs. It was discovered that packets utilizing these IP addresses may egress an QFX5000 Series switch, leaking configuration information such as heartbeats, kernel versions, etc. out to the Internet, leading to an information exposure vulnerability. This issue affects Juniper Networks Junos OS on QFX5110, QFX5120, QFX5200, QFX5210 Series, and QFX5100 with QFX 5e Series image installed: All versions prior to 17.3R3-S12; 18.1 versions prior to 18.1R3-S13; 18.3 versions prior to 18.3R3-S5; 19.1 versions prior to 19.1R3-S6; 19.2 versions prior to 19.2R1-S7, 19.2R3-S3; 19.3 versions prior to 19.3R2-S6, 19.3R3-S3; 19.4 versions prior to 19.4R1-S4, 19.4R3-S5; 20.1 versions prior to 20.1R2-S2, 20.1R3-S1; 20.2 versions prior to 20.2R3-S2; 20.3 versions prior to 20.3R3-S1; 20.4 versions prior to 20.4R2-S1, 20.4R3; 21.1 versions prior to 21.1R1-S1, 21.1R2;

A configuration weakness in the JBoss Application Server (AppSvr) component of Juniper Networks SRC Series allows a remote attacker to send a specially crafted query to cause the web server to disclose sensitive information in the HTTP response which allows the attacker to obtain sensitive information.

The Secure Meeting (Pulse Collaboration) in Pulse Connect Secure (formerly Juniper Junos Pulse) before 7.1R22.1, 7.4, 8.0 before 8.0R11, and 8.1 before 8.1R3 provides different messages for attempts to join a meeting depending on the status of the meeting, which allows remote attackers to enumerate valid meeting ids via a series of requests.

The encryption implementation in Juniper ScreenOS 6.2.0r15 through 6.2.0r18, 6.3.0r12 before 6.3.0r12b, 6.3.0r13 before 6.3.0r13b, 6.3.0r14 before 6.3.0r14b, 6.3.0r15 before 6.3.0r15b, 6.3.0r16 before 6.3.0r16b, 6.3.0r17 before 6.3.0r17b, 6.3.0r18 before 6.3.0r18b, 6.3.0r19 before 6.3.0r19b, and 6.3.0r20 before 6.3.0r21 makes it easier for remote attackers to discover the plaintext content of VPN sessions by sniffing the network for ciphertext data and conducting an unspecified decryption attack.

An Information Exposure vulnerability in Juniper Networks SRC Series devices configured for NETCONF over SSH permits the negotiation of weak ciphers, which could allow a remote attacker to obtain sensitive information. A remote attacker with read and write access to network data could exploit this vulnerability to display plaintext bits from a block of ciphertext and obtain sensitive information. This issue affects all Juniper Networks SRC Series versions prior to 4.13.0-R6.

The Juniper Junos Pulse Secure Access Service (SSL VPN) devices with IVE OS before 7.4r5 and 8.x before 8.0r1 and Junos Pulse Access Control Service (UAC) before 4.4r5 and 5.x before 5.0r1 enable cipher suites with weak encryption algorithms, which make it easier for remote attackers to obtain sensitive information by sniffing the network.

Behavioral discrepancy information leak in Juniper Netscreen VPN running ScreenOS 5.2.0 and earlier, when using IKE with pre-shared key authentication, allows remote attackers to enumerate valid usernames via an IKE Aggressive Mode packet, which generates a response if the username is valid but does not respond when the username is invalid.

Juniper Junos 10.4 before 10.4S13, 11.4 before 11.4R7-S1, 12.1 before 12.1R5-S3, 12.1X44 before 12.1X44-D20, and 12.1X45 before 12.1X45-D10 on the SRX1400, SRX3400, and SRX3600 does not properly initialize memory locations used during padding of Ethernet packets, which allows remote attackers to obtain sensitive information by reading packet data, aka PR 829536, a related issue to CVE-2003-0001.

The default installation of NetScreen-Security Manager before Feature Pack 1 does not enable encryption for communication with devices running ScreenOS 5.0, which allows remote attackers to obtain sensitive information via sniffing.

An XPath Injection vulnerability in the J-Web component of Juniper Networks Junos OS allows an unauthenticated attacker sending a crafted POST to reach the XPath channel, which may allow chaining to other unspecified vulnerabilities, leading to a partial loss of confidentiality. This issue affects Juniper Networks Junos OS: all versions prior to 19.1R3-S9; 19.2 versions prior to 19.2R3-S6; 19.3 versions prior to 19.3R3-S7; 19.4 versions prior to 19.4R3-S9; 20.1 versions prior to 20.1R3-S5; 20.2 versions prior to 20.2R3-S5; 20.3 versions prior to 20.3R3-S5; 20.4 versions prior to 20.4R3-S4; 21.1 versions prior to 21.1R3-S3; 21.2 versions prior to 21.2R3-S1; 21.3 versions prior to 21.3R3; 21.4 versions prior to 21.4R1-S2, 21.4R2; 22.1 versions prior to 22.1R1-S1, 22.1R2.

Juniper Networks Junos OS uses the 128.0.0.0/2 subnet for internal communications between the RE and PFEs. It was discovered that packets utilizing these IP addresses may egress an EX4300 switch, leaking configuration information such as heartbeats, kernel versions, etc. out to the Internet, leading to an information exposure vulnerability. This issue affects Juniper Networks Junos OS: 14.1X53 versions prior to 14.1X53-D53 on EX4300; 15.1 versions prior to 15.1R7-S6 on EX4300; 15.1X49 versions prior to 15.1X49-D200, 15.1X49-D210 on EX4300; 16.1 versions prior to 16.1R7-S7 on EX4300; 17.1 versions prior to 17.1R2-S11, 17.1R3-S2 on EX4300; 17.2 versions prior to 17.2R3-S3 on EX4300; 17.3 versions prior to 17.3R2-S5, 17.3R3-S7 on EX4300; 17.4 versions prior to 17.4R2-S9, 17.4R3 on EX4300; 18.1 versions prior to 18.1R3-S8 on EX4300; 18.2 versions prior to 18.2R3-S2 on EX4300; 18.3 versions prior to 18.3R2-S3, 18.3R3, 18.3R3-S1 on EX4300; 18.4 versions prior to 18.4R1-S5, 18.4R2-S3, 18.4R3 on EX4300; 19.1 versions prior to 19.1R1-S4, 19.1R2 on EX4300; 19.2 versions prior to 19.2R1-S4, 19.2R2 on EX4300; 19.3 versions prior to 19.3R1-S1, 19.3R2 on EX4300.

An Insecure Default Initialization of Resource vulnerability in Juniper Networks Junos OS Evolved allows an unauthenticated, network based attacker to read certain confidential information. In the default configuration it is possible to read confidential information about locally configured (administrative) users of the affected system. This issue affects Juniper Networks Junos OS Evolved: All versions prior to 20.4R3-S7-EVO on pending commit???; 21.1-EVO versions prior to 21.1R3-S4-EVO on awaiting build; 21.4-EVO versions prior to 21.4R3-S1-EVO; 22.2-EVO versions prior to 22.2R3-EVO; 21.2-EVO versions prior to 21.2R3-S5-EVO on pending commit???; 21.3-EVO version 21.3R1-EVO and later versions; 22.1-EVO version 22.1R1-EVO and later versions; 22.2-EVO versions prior to 22.2R2-S1-EVO.

Juniper Networks CSO versions prior to 4.0.0 may log passwords in log files leading to an information disclosure vulnerability.

Juniper Networks QFX3500, QFX3600, QFX5100, QFX5200, EX4300 and EX4600 devices running Junos OS 14.1X53 prior to 14.1X53-D40, 15.1X53 prior to 15.1X53-D40, 15.1 prior to 15.1R2, do not pad Ethernet packets with zeros, and thus some packets can contain fragments of system memory or data from previous packets. This issue is also known as 'Etherleak'

An XML External Entity Injection vulnerability in Juniper Networks Junos Space versions prior to 16.1R1 may allow an authenticated user to read arbitrary files on the device.

The ifmap service that comes bundled with Contrail has an XML External Entity (XXE) vulnerability that may allow an attacker to retrieve sensitive system files. Affected releases are Juniper Networks Contrail 2.2 prior to 2.21.4; 3.0 prior to 3.0.3.4; 3.1 prior to 3.1.4.0; 3.2 prior to 3.2.5.0. CVE-2017-10616 and CVE-2017-10617 can be chained together and have a combined CVSSv3 score of 5.8 (AV:N/AC:L/PR:N/UI:N/S:C/C:L/I:N/A:N).

The ifmap service that comes bundled with Juniper Networks Contrail releases uses hard coded credentials. Affected releases are Contrail releases 2.2 prior to 2.21.4; 3.0 prior to 3.0.3.4; 3.1 prior to 3.1.4.0; 3.2 prior to 3.2.5.0. CVE-2017-10616 and CVE-2017-10617 can be chained together and have a combined CVSSv3 score of 5.8 (CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:C/C:L/I:N/A:N).

An Improper Authentication vulnerability in cert-mgmt.php, used by the J-Web component of Juniper Networks Junos OS allows an unauthenticated, network-based attacker to read arbitrary files from temporary folders on the device. This issue affects Juniper Networks Junos OS: All versions prior to 19.1R3-S10; 19.2 versions prior to 19.2R3-S7; 19.3 versions prior to 19.3R3-S8; 19.4 versions prior to 19.4R3-S11; 20.1 version 20.1R1 and later versions; 20.2 versions prior to 20.2R3-S7; 20.3 version 20.3R1 and later versions; 20.4 versions prior to 20.4R3-S6; 21.1 versions prior to 21.1R3-S5; 21.2 versions prior to 21.2R3-S4; 21.3 versions prior to 21.3R3-S3; 21.4 versions prior to 21.4R3-S3; 22.1 versions prior to 22.1R3-S1; 22.2 versions prior to 22.2R2-S1, 22.2R3; 22.3 versions prior to 22.3R1-S2, 22.3R2.

An Information Exposure vulnerability in J-Web of Juniper Networks Junos OS allows an unauthenticated attacker to elevate their privileges over the target system through opportunistic use of an authenticated users session. This issue affects: Juniper Networks Junos OS 12.3 versions prior to 12.3R12-S17; 17.3 versions prior to 17.3R3-S10; 17.4 versions prior to 17.4R2-S12, 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S6; 18.3 versions prior to 18.3R2-S4, 18.3R3-S4; 18.4 versions prior to 18.4R2-S5, 18.4R3-S5; 19.1 versions prior to 19.1R1-S6, 19.1R2-S2, 19.1R3-S3; 19.2 versions prior to 19.2R1-S5, 19.2R3, 19.2R3-S1; 19.3 versions prior to 19.3R2-S4, 19.3R3; 19.4 versions prior to 19.4R1-S3, 19.4R2-S2, 19.4R3; 20.1 versions prior to 20.1R1-S4, 20.1R2; 20.2 versions prior to 20.2R1-S1, 20.2R2.

When the device is configured to perform account lockout with a defined period of time, any unauthenticated user attempting to log in as root with an incorrect password can trigger a lockout of the root account. When an SRX Series device is in cluster mode, and a cluster sync or failover operation occurs, then there will be errors associated with synch or failover while the root account is locked out. Administrators can confirm if the root account is locked out via the following command root@device> show system login lockout user root User Lockout start Lockout end root 1995-01-01 01:00:01 PDT 1995-11-01 01:31:01 PDT Affected releases are Juniper Networks Junos OS 12.1X46 prior to 12.1X46-D65 on SRX series; 12.3X48 prior to 12.3X48-D45 on SRX series; 15.1X49 prior to 15.1X49-D75 on SRX series.

An Improper Restriction of Excessive Authentication Attempts vulnerability in Juniper Networks Junos OS Evolved allows an unauthenticated, network-based attacker to cause a limited Denial of Service (DoS) to the management plane. When an incoming connection was blocked because it exceeded the connections-per-second rate-limit, the system doesn't consider existing connections anymore for subsequent connection attempts so that the connection limit can be exceeded. This issue affects Junos OS Evolved: * All versions before 21.4R3-S4-EVO, * 22.1-EVO versions before 22.1R3-S3-EVO, * 22.2-EVO versions before 22.2R3-S2-EVO,  * 22.3-EVO versions before 22.3R2-S1-EVO, 22.3R3-EVO.

If REST API is enabled, the Junos OS login credentials are vulnerable to brute force attacks. The high default connection limit of the REST API may allow an attacker to brute-force passwords using advanced scripting techniques. Additionally, administrators who do not enforce a strong password policy can increase the likelihood of success from brute force attacks. Affected releases are Juniper Networks Junos OS: 14.1X53 versions prior to 14.1X53-D49; 15.1 versions prior to 15.1F6-S12, 15.1R7-S3; 15.1X49 versions prior to 15.1X49-D160; 15.1X53 versions prior to 15.1X53-D236, 15.1X53-D495, 15.1X53-D591, 15.1X53-D69; 16.1 versions prior to 16.1R3-S10, 16.1R4-S12, 16.1R6-S6, 16.1R7-S3; 16.1X65 versions prior to 16.1X65-D49; 16.2 versions prior to 16.2R2-S7; 17.1 versions prior to 17.1R2-S10, 17.1R3; 17.2 versions prior to 17.2R1-S8, 17.2R3-S1; 17.3 versions prior to 17.3R3-S2; 17.4 versions prior to 17.4R1-S6, 17.4R2-S2; 18.1 versions prior to 18.1R2-S4, 18.1R3-S1; 18.2 versions prior to 18.2R1-S5; 18.2X75 versions prior to 18.2X75-D30; 18.3 versions prior to 18.3R1-S1.

Cryptocat before 2.0.42 has Group Chat ECC Private Key Generation Brute Force Weakness

Nextcloud Server is a Nextcloud package that handles data storage. In versions prior to 19.0.13, 20.011, and 21.0.3, there was a lack of ratelimiting on the public DAV endpoint. This may have allowed an attacker to enumerate potentially valid share tokens or credentials. The issue was fixed in versions 19.0.13, 20.0.11, and 21.0.3. There are no known workarounds.

Improper restriction of excessive authentication attempts vulnerability in QSAN Storage Manager, XEVO, SANOS allows remote attackers to discover users’ credentials and obtain access via a brute force attack. Suggest contacting with QSAN and refer to recommendations in QSAN Document.

index.php?r=site%2Flogin in EduSec through 4.2.6 does not restrict sending a series of LoginForm[username] and LoginForm[password] parameters, which might make it easier for remote attackers to obtain access via a brute-force approach.

Nextcloud Server is a Nextcloud package that handles data storage. In versions prior to 19.0.13, 20.011, and 21.0.3, there was a lack of ratelimiting on the shareinfo endpoint. This may have allowed an attacker to enumerate potentially valid share tokens. The issue was fixed in versions 19.0.13, 20.0.11, and 21.0.3. There are no known workarounds.

In Discourse 2.7.0 through beta1, a rate-limit bypass leads to a bypass of the 2FA requirement for certain forms.

Nextcloud Talk is a video and audio conferencing app for Nextcloud. Prior to versions 12.2.7, 13.0.7, and 14.0.3, password protected conversations are susceptible to brute force attacks if the attacker has the link/conversation token. It is recommended that the Nextcloud Talk application is upgraded to 12.2.7, 13.0.7 or 14.0.3. There are currently no known workarounds available apart from not having password protected conversations.

phpMyFAQ before 2.9.8 does not properly mitigate brute-force attacks that try many passwords in attempted logins quickly.

Dell SupportAssist contains a rate limit bypass issues in screenmeet API third party component. An unauthenticated attacker could potentially exploit this vulnerability and impersonate a legitimate dell customer to a dell support technician.

SAP NetWeaver AS Java allows an unauthenticated attacker to brute force the login functionality in order to identify the legitimate user IDs. This has an impact on confidentiality but not on integrity or availability.

IBM WebSphere Application Server 7.0, 8.0, 8.5, 9.0 and Liberty 17.0.0.3 through 21.0.0.9 could allow a remote user to enumerate usernames due to a difference of responses from valid and invalid login attempts. IBM X-Force ID: 205202.

CA eHealth Performance Manager through 6.3.2.12 is affected by Improper Restriction of Excessive Authentication Attempts. An attacker is able to perform an arbitrary number of /web/frames/ authentication attempts using different passwords, and eventually gain access to a targeted account, NOTE: This vulnerability only affects products that are no longer supported by the maintainer

An issue in TopIDP3000 Topsec Operating System tos_3.3.005.665b.15_smpidp allows attackers to perform a brute-force attack via a crafted session_id cookie.

Password enumeration vulnerability in Liferay Portal 7.4.0 through 7.4.3.119, and older unsupported versions, and Liferay DXP 2024.Q1.1 through 2024.Q1.5, 2023.Q4.0 through 2023.Q4.10, 2023.Q3.1 through 2023.Q3.10, 7.4 GA through update 92, and older unsupported versions allows remote attackers to determine a user’s password even if account lockout is enabled via brute force attack.

Nextcloud server is an open source personal cloud solution. In affected versions an attacker could brute force to find if federated sharing is being used and potentially try to brute force access tokens for federated shares (`a-zA-Z0-9` ^ 15). It is recommended that the Nextcloud Server is upgraded to 22.2.9, 23.0.6 or 24.0.2. Users unable to upgrade may disable federated sharing via the Admin Sharing settings in `index.php/settings/admin/sharing`.

A vulnerability was found in Thecosy IceCMS 2.0.1. It has been classified as problematic. Affected is an unknown function of the file /login of the component Captcha Handler. The manipulation leads to improper restriction of excessive authentication attempts. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-247884.

A vulnerability has been identified in Location Intelligence family (All versions < V4.4). Affected products do not properly enforce restriction of excessive authentication attempts. This could allow an unauthenticated remote attacker to conduct brute force attacks against legitimate user passwords.

IBM Security Guardium Big Data Intelligence (SonarG) 3.1 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials. IBM X-Force ID: 137773.

BAB TECHNOLOGIE GmbH eibPort V3 prior version 3.9.1 allow unauthenticated attackers to access uncontrolled the login service at /webif/SecurityModule in a brute force attack. The password could be weak and default username is known as 'admin'. This is usable and part of an attack chain to gain SSH root access.

The Phonemes mode in Pwgen 2.06 generates predictable passwords, which makes it easier for context-dependent attackers to guess the password via a brute-force attack.

A vulnerability classified as critical was found in Telecommunication Software SAMwin Contact Center Suite 5.1. This vulnerability affects the function passwordScramble in the library SAMwinLIBVB.dll of the component Password Handler. Incorrect implementation of a hashing function leads to predictable authentication possibilities. Upgrading to version 6.2 is able to address this issue. It is recommended to upgrade the affected component.

The telnet administrator service running on port 650 on Gigaset DX600A v41.00-175 devices does not implement any lockout or throttling functionality. This situation (together with the weak password policy that forces a 4-digit password) allows remote attackers to easily obtain administrative access via brute-force attacks.

An issue was discovered in DSK DSKNet 2.16.136.0 and 2.17.136.5. It mishandles access control. This allows a remote attacker to access account information pages (including personal data) without being authenticated. The collected information includes the badge numbers that operate as user login names. They have a PIN code. The PIN code is 4 digits and thus can be guessed in 10000 brute force attempts.

OPEXUS FOIAXpress Public Access Link (PAL) version v11.1.0 allows attackers to bypass account-lockout and CAPTCHA protections. Unauthenticated remote attackers can more easily brute force passwords.

LibreNMS is an auto-discovering PHP/MySQL/SNMP based network monitoring which includes support for a wide range of network hardware and operating systems. In affected versions the login method has no rate limit. An attacker may be able to leverage this vulnerability to gain access to user accounts. This issue has been addressed in version 23.11.0. Users are advised to upgrade. There are no known workarounds for this vulnerability.

VMware Workspace ONE Access and Identity Manager, unintentionally provide a login interface on port 7443. A malicious actor with network access to port 7443 may attempt user enumeration or brute force the login endpoint, which may or may not be practical based on lockout policy configuration and password complexity for the target account.

The unauthenticated attacker in NetWeaver AS Java Logon application - version 7.50, can brute force the login functionality to identify the legitimate user ids. This will have an impact on confidentiality but there is no other impact on integrity or availability.