An issue was discovered on Zyxel GS1900 devices with firmware before 2.50(AAHH.0)C0. The firmware image contains encrypted passwords that are used to authenticate users wishing to access a diagnostics or password-recovery menu. Using the hardcoded cryptographic key found elsewhere in the firmware, these passwords can be decrypted. This is related to fds_sys_passDebugPasswd_ret() and fds_sys_passRecoveryPasswd_ret() in libfds.so.0.0.

Use of a hard-coded cryptographic key to encrypt security sensitive data in local storage and configuration in FortiClient for Windows prior to 6.4.0 may allow an attacker with access to the local storage or the configuration backup file to decrypt the sensitive data via knowledge of the hard-coded key.

Cisco IP Phone (VoIP) 7920 1.0(8) contains certain hard-coded ("fixed") public and private SNMP community strings that cannot be changed, which allows remote attackers to obtain sensitive information.

The SNMP daemon in UTStarcom F1000 VOIP WIFI Phone s2.0 running VxWorks 5.5.1 with kernel WIND 2.6 has hard-coded public credentials that cannot be changed, which allows attackers to obtain sensitive information.

An issue was discovered in iNextrix ASTPP before 4.0.1. web_interface/astpp/application/config/config.php does not have strong random keys, as demonstrated by use of the 8YSDaBtDHAB3EQkxPAyTz2I5DttzA9uR private key and the r)fddEw232f encryption key.

A vulnerability has been identified in MXsecurity versions prior to v1.0.1. The vulnerability may put the confidentiality and integrity of SSH communications at risk on the affected device. This vulnerability is attributed to a hard-coded SSH host key, which might facilitate man-in-the-middle attacks and enable the decryption of SSH traffic.

Apache Kylin provides encryption classes PasswordPlaceholderConfigurer to help users encrypt their passwords. In the encryption algorithm used by this encryption class, the cipher is initialized with a hardcoded key and IV. If users use class PasswordPlaceholderConfigurer to encrypt their password and configure it into kylin's configuration file, there is a risk that the password may be decrypted. This issue affects Apache Kylin 2 version 2.6.6 and prior versions; Apache Kylin 3 version 3.1.2 and prior versions; Apache Kylin 4 version 4.0.0 and prior versions.

The Realm Server component of TIBCO Software Inc.'s TIBCO FTL - Community Edition, TIBCO FTL - Developer Edition, and TIBCO FTL - Enterprise Edition contains an easily exploitable vulnerability that allows authentication bypass due to a hard coded secret used in the default realm server of the affected system. Affected releases are TIBCO Software Inc.'s TIBCO FTL - Community Edition: versions 6.7.2 and below, TIBCO FTL - Developer Edition: versions 6.7.2 and below, and TIBCO FTL - Enterprise Edition: versions 6.7.2 and below.

A vulnerability has been identified in LOGO! 8 BM (incl. SIPLUS variants) (All versions < V8.3). Project data stored on the device, which is accessible via port 10005/tcp, can be decrypted due to a hardcoded encryption key. The security vulnerability could be exploited by an unauthenticated attacker with network access to port 10005/tcp. No user interaction is required to exploit this security vulnerability. The vulnerability impacts confidentiality of the device. At the time of advisory publication no public exploitation of this security vulnerability was known.

yeti-platform yeti before 2.1.12 allows attackers to generate valid JWT tokens is the secret is not changed (by setting YETI_AUTH_SECRET_KEY to a value other than SECRET).

D-Link DVG-3104MS version 1.0.2.0.3, 1.0.2.0.4, and 1.0.2.0.4E contains hard-coded credentials for undocumented user accounts in the '/etc/passwd' file. As weak passwords have been used, the plaintext passwords can be recovered from the hash values. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

D-Link DVX-2000MS contains hard-coded credentials for undocumented user accounts in the '/etc/passwd' file. As weak passwords have been used, the plaintext passwords can be recovered from the hash values.

Hardcoded .htaccess Credentials for getlogs.cgi exist on Altus Nexto, Nexto Xpress, and Hadron Xtorm devices. This affects Nexto NX3003 1.8.11.0, Nexto NX3004 1.8.11.0, Nexto NX3005 1.8.11.0, Nexto NX3010 1.8.3.0, Nexto NX3020 1.8.3.0, Nexto NX3030 1.8.3.0, Nexto NX5100 1.8.11.0, Nexto NX5101 1.8.11.0, Nexto NX5110 1.1.2.8, Nexto NX5210 1.1.2.8, Nexto Xpress XP300 1.8.11.0, Nexto Xpress XP315 1.8.11.0, Nexto Xpress XP325 1.8.11.0, Nexto Xpress XP340 1.8.11.0, and Hadron Xtorm HX3040 1.7.58.0.

IBM Spectrum Virtualize 8.2, 8.3, and 8.4 could allow an attacker to allow unauthorized access due to the reuse of support generated credentials. IBM X-Force ID: 212609.

IBM Cognos Controller 11.0.0 and 11.0.1 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data.

Common encryption key appears to be used across all deployed instances of Serv-U FTP Server. Because of this an encrypted value that is exposed to an attacker can be simply recovered to plaintext.

The account validation endpoint /v1/User/validate returns comprehensive user profile data sheets, which can be crawled by iterating predictable identification strings.

Use of hard-coded credentials vulnerability in php component in Synology Calendar before 2.4.0-0761 allows remote attackers to obtain sensitive information via unspecified vectors.

An attacker can gain VxWorks Shell after login due to hard-coded credentials on a KUKA KR C4 control software for versions prior to 8.7 or any product running KSS.

An issue was discovered in CommentsService.ashx in OnyakTech Comments Pro 3.8. An attacker can download a copy of the installer, decompile it, and discover a hardcoded IV used to encrypt the username and userid in the comment POST request. Additionally, the attacker can decrypt the encrypted encryption key (sent as a parameter in the comment form request) by setting this encrypted value as the username, which will appear on the comment page in its decrypted form. Using these two values (combined with the encryption functionality discovered in the decompiled installer), the attacker can encrypt another user's ID and username. These values can be used as part of the comment posting request in order to spoof the user.

An attacker can gain full access (read/write/delete) to sensitive folders due to hard-coded credentials on KUKA KR C4 control software for versions prior to 8.7 or any product running KSS.

The configuration file is encrypted with a static key derived from a static five-character password which allows an attacker to decrypt this file. The application hashes this five-character password with the outdated and broken MD5 algorithm (no salt) and uses the first five bytes as the key for RC4. The configuration file is then encrypted with these parameters.

An issue in Automatic Systems SOC FL9600 FirstLane V06 lego_T04E00 allows a remote attacker to obtain sensitive information because there is an automaticsystems super admin account with astech as its hardcoded password.

Use of Default Credentials, Hard-coded Credentials vulnerability in C2SGlobalSettings.dll in Milner ImageDirector Capture on Windows allows decryption of document archive files using credentials decrypted with hard-coded application encryption key. This issue affects ImageDirector Capture: from 7.0.9.0 before 7.6.3.25808.

Akkadian Provisioning Manager Engine (PME) ships with a hard-coded credential, akkadianuser:haakkadianpassword. This issue was resolved in Akkadian OVA appliance version 3.0 (and later), Akkadian Provisioning Manager 5.0.2 (and later), and Akkadian Appliance Manager 3.3.0.314-4a349e0 (and later).

IBM Security Identity Manager 7.0.2 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data. IBM X-Force ID: 200252.

The default administrator account & password of the EDIMAX wireless network camera is hard-coded. Remote attackers can disassemble firmware to obtain the privileged permission and further control the devices.

Hardcoded credentials in Dietly v1.25.0 for android allows attackers to gain sensitive information.

HCL Aftermarket DPC is affected by SQL Injection which allows attacker to exploit this vulnerability to retrieve sensitive information from the database.

Hardcoded default root credentials exist on the ecobee3 lite 4.5.81.200 device. This allows a threat actor to gain access to the password-protected bootloader environment through the serial console.

A vulnerability involving insecure storage of sensitive information has been reported to affect QSW-M2116P-2T2S and QNAP switches running QuNetSwitch. If exploited, this vulnerability allows remote attackers to read sensitive information by accessing the unrestricted storage mechanism.We have already fixed this vulnerability in the following versions: QSW-M2116P-2T2S 1.0.6 build 210713 and later QGD-1600P: QuNetSwitch 1.0.6.1509 and later QGD-1602P: QuNetSwitch 1.0.6.1509 and later QGD-3014PT: QuNetSwitch 1.0.6.1519 and later

HCL Aftermarket DPC is affected by Hardcoded Sensitive Data which allows attacker to gain access to the source code or if it is stored in insecure repositories, they can easily retrieve these hardcoded secrets.

An issue was discovered on FiberHome HG6245D devices through RP2613. There is a 6GFJdY4aAuUKJjdtSn7d password for the rdsadmin account.

An issue was discovered on FiberHome HG6245D devices through RP2613. The web daemon contains the hardcoded f~i!b@e#r$h%o^m*esuperadmin / s(f)u_h+g|u credentials for an ISP.

An issue was discovered on FiberHome HG6245D devices through RP2613. A hardcoded GEPON password for root is defined inside /etc/init.d/system-config.sh.

The IMM2 First Failure Data Capture function collects management module logs and diagnostic information when a hardware error is detected. This information is made available for download through an SFTP server hosted on the IMM2 management network interface. In versions earlier than 4.90 for Lenovo System x and earlier than 6.80 for IBM System x, the credentials to access the SFTP server are hard-coded and described in the IMM2 documentation, allowing an attacker with management network access to obtain the collected FFDC data. After applying the update, the IMM2 will create random SFTP credentials for use with OneCLI.

An issue was discovered on FiberHome HG6245D devices through RP2613. The telnet daemon on port 23/tcp can be abused with the gpon/gpon credentials.

An issue was discovered on FiberHome AN5506-04-FA devices with firmware RP2631. There is a gepon password for the gepon account.

An issue was discovered on FiberHome HG6245D devices through RP2613. There is a password of four hexadecimal characters for the admin account. These characters are generated in init_3bb_password in libci_adaptation_layer.so.

An issue was discovered on FiberHome HG6245D devices through RP2613. The web daemon contains the hardcoded user / user1234 credentials for an ISP.

An issue was discovered on FiberHome HG6245D devices through RP2613. The web management is done over HTTPS, using a hardcoded private key that has 0777 permissions.

An issue was discovered on FiberHome HG6245D devices through RP2613. Credentials in /fhconf/umconfig.txt are obfuscated via XOR with the hardcoded *j7a(L#yZ98sSd5HfSgGjMj8;Ss;d)(*&^#@$a2s0i3g key. (The webs binary has details on how XOR is used.)

An issue was discovered on FiberHome HG6245D devices through RP2613. The password for the enable command is gpon.

A vulnerability has been discovered in the firmware of Paxton Paxton10 before 4.6 SR6. The firmware file, rootfs.tar.gz, contains hard-coded credentials for the Twilio API. A remote attacker who obtains a copy of the firmware can extract these credentials. This could allow the attacker to gain unauthorized access to the associated Twilio account, leading to information disclosure, potential service disruption, and unauthorized use of the Twilio services.

A use of hard-coded cryptographic key vulnerability in the SSLVPN of FortiOS before 7.0.1 may allow an attacker to retrieve the key by reverse engineering.

Usage of hard-coded cryptographic keys to encrypt configuration files and debug logs in FortiAuthenticator versions before 6.3.0 may allow an attacker with access to the files or the CLI configuration to decrypt the sensitive data, via knowledge of the hard-coded key.

Ovarro TBox TWinSoft uses the custom hardcoded user “TWinSoft” with a hardcoded key.

An issue was discovered in svc-login.php in Void Aural Rec Monitor 9.0.0.1. Passwords are stored in unencrypted source-code text files. This was noted when accessing the svc-login.php file. The value is used to authenticate a high-privileged user upon authenticating with the server.

The wsc server uses a hard-coded certificate to check the authenticity of SOAP messages. An unauthenticated remote attacker can extract private keys from the Software of the affected devices.

IBM Security Verify Information Queue 1.0.6 and 1.0.7 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data. IBM X-Force ID: 198192.