A command injection vulnerability in the serverIp parameter in the function meshSlaveDlfw of TOTOLINK T8 V4.1.5cu allows attackers to execute arbitrary commands via a crafted MQTT packet.

TOTOLINK CA300-PoE V6.2c.884 was discovered to contain a command injection vulnerability via the admpass parameter in the setPasswordCfg function.

A command injection vulnerability in the ip parameter in the function recvSlaveUpgstatus of TOTOLINK T8 V4.1.5cu allows attackers to execute arbitrary commands via a crafted MQTT packet.

WAYOS FBM-291W 19.09.11V was discovered to contain a command injection vulnerability via the component /upgrade_filter.asp.

TOTOLINK CA300-PoE V6.2c.884 was discovered to contain a command injection vulnerability via the hour parameter in the setRebootScheCfg function.

A vulnerability was identified in D-Link DIR-860L 2.04.B04. This affects the function ssdpcgi_main of the file htdocs/cgibin of the component Simple Service Discovery Protocol. The manipulation leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

TOTOlink A7100RU(V7.4cu.2313_B20191024) was discovered to contain a command injection vulnerability via the province parameter at setting/delStaticDhcpRules.

D-Link DIR-822+ V1.0.5 was found to contain a command injection in ftext function of upload_firmware.cgi, which allows remote attackers to execute arbitrary commands via shell.

A command injection vulnerability in the ip parameter in the function recvSlaveCloudCheckStatus of TOTOLINK T8 V4.1.5cu allows attackers to execute arbitrary commands via a crafted MQTT packet.

A command injection vulnerability in the serverIp parameter in the function meshSlaveUpdate of TOTOLINK T8 V4.1.5cu allows attackers to execute arbitrary commands via a crafted MQTT packet.

Not all valid JavaScript whitespace characters are considered to be whitespace. Templates containing whitespace characters outside of the character set "\t\n\f\r\u0020\u2028\u2029" in JavaScript contexts that also contain actions may not be properly sanitized during execution.

Linksys E5600 v1.1.0.26 was discovered to contain a command injection vulnerability via the ipurl parameter at /API/info form endpoint.

TOTOLINK outdoor CPE CP450 v4.1.0cu.747_B20191224 was discovered to contain a command injection vulnerability in the setUpgradeFW function via the FileName parameter.

TOTOlink A7100RU(V7.4cu.2313_B20191024) was discovered to contain a command injection vulnerability via the city parameter at setting/delStaticDhcpRules.

An os command injection vulnerability exists in the touchlist_sync.cgi touchlistsync() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted set of HTTP requests can lead to arbitrary code execution. An attacker can send an HTTP request to trigger this vulnerability.

TOTOLINK CA300-PoE V6.2c.884 was discovered to contain a command injection vulnerability via the NetDiagPingTimeOut parameter in the setNetworkDiag function.

A command injection vulnerability in the version parameter in the function recvSlaveCloudCheckStatus of TOTOLINK T8 V4.1.5cu allows attackers to execute arbitrary commands via a crafted MQTT packet.

The kill-port-process package version < 2.2.0 is vulnerable to a Command Injection vulnerability.

TOTOLINK CA300-PoE V6.2c.884 was discovered to contain a command injection vulnerability via the FileName parameter in the setUploadUserData function.

TOTOLINK CA300-PoE V6.2c.884 was discovered to contain a command injection vulnerability via the plugin_version parameter in the setUnloadUserData function.

TOTOLINK CA300-PoE V6.2c.884 was discovered to contain a command injection vulnerability via the minute parameter in the setRebootScheCfg function.

TOTOLINK CA300-PoE V6.2c.884 was discovered to contain a command injection vulnerability via the webWlanIdx parameter in the setWebWlanIdx function.

TOTOLink A7100RU V7.4cu.2313_B20191024 was discovered to contain a command injection vulnerability.

Possible Command Injection in iManager GET parameter has been discovered in OpenText™ iManager 3.2.6.0000.

TOTOLINK CA300-PoE V6.2c.884 was discovered to contain a command injection vulnerability via the NetDiagPingSize parameter in the setNetworkDiag function.

Advanced Secure Gateway and Content Analysis, prior to 7.3.13.1 / 3.1.6.0, may be susceptible to a Command Injection vulnerability.

DEK-1705 <=Firmware:34.23.1 device was discovered to have a command execution vulnerability.

Netdata is an open source option for real-time infrastructure monitoring and troubleshooting. An attacker with the ability to establish a streaming connection can execute arbitrary commands on the targeted Netdata agent. When an alert is triggered, the function `health_alarm_execute` is called. This function performs different checks and then enqueues a command by calling `spawn_enq_cmd`. This command is populated with several arguments that are not sanitized. One of them is the `registry_hostname` of the node for which the alert is raised. By providing a specially crafted `registry_hostname` as part of the health data that is streamed to a Netdata (parent) agent, an attacker can execute arbitrary commands at the remote host as a side-effect of the raised alert. Note that the commands are executed as the user running the Netdata Agent. This user is usually named `netdata`. The ability to run arbitrary commands may allow an attacker to escalate privileges by escalating other vulnerabilities in the system, as that user. The problem has been fixed in: Netdata agent v1.37 (stable) and Netdata agent v1.36.0-409 (nightly). As a workaround, streaming is not enabled by default. If you have previously enabled this, it can be disabled. Limiting access to the port on the recipient Agent to trusted child connections may mitigate the impact of this vulnerability.

Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability in Apache Software Foundation Apache Airflow, Apache Software Foundation Apache Airflow MySQL Provider.This issue affects Apache Airflow: before 2.5.1; Apache Airflow MySQL Provider: before 4.0.0.

An issue was discovered on ASMAX AR-804gu 66.34.1 devices. There is Command Injection via the cgi-bin/script query string.

A vulnerability was found in TOTOLINK X15 1.0.0-B20230714.1105. It has been classified as critical. Affected is an unknown function of the file /boafrm/formMapDelDevice of the component HTTP POST Request Handler. The manipulation of the argument macstr leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

There are multiple command injection vulnerabilities that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba Networks access point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities result in the ability to execute arbitrary code as a privileged user on the underlying operating system.

Ghidra/RuntimeScripts/Linux/support/launch.sh in NSA Ghidra through 10.2.2 passes user-provided input into eval, leading to command injection when calling analyzeHeadless with untrusted input.

There are multiple command injection vulnerabilities that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba Networks access point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities result in the ability to execute arbitrary code as a privileged user on the underlying operating system.

An issue was discovered in Digi TransPort DR64, SR44 VC74, and WR. The ZING protocol allows arbitrary remote command execution with SUPER privileges. This allows an attacker (with knowledge of the protocol) to execute arbitrary code on the controller including overwriting firmware, adding/removing users, disabling the internal firewall, etc.

There is a command injection vulnerability in SolarView Compact through 6.00, attackers can execute commands by bypassing internal restrictions through downloader.php.

There are multiple command injection vulnerabilities that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba Networks access point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities result in the ability to execute arbitrary code as a privileged user on the underlying operating system.

An OS command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow users to execute commands via a network. We have already fixed the vulnerability in the following versions: Multimedia Console 2.1.2 ( 2023/05/04 ) and later Multimedia Console 1.4.8 ( 2023/05/05 ) and later QTS 5.1.0.2399 build 20230515 and later QTS 4.3.6.2441 build 20230621 and later QTS 4.3.4.2451 build 20230621 and later QTS 4.3.3.2420 build 20230621 and later QTS 4.2.6 build 20230621 and later Media Streaming add-on 500.1.1.2 ( 2023/06/12 ) and later Media Streaming add-on 500.0.0.11 ( 2023/06/16 ) and later

Certain Tenda products are vulnerable to command injection. This affects Tenda CP7 Tenda CP7<=V11.10.00.2211041403 and Tenda CP3 v.10 Tenda CP3 v.10<=V20220906024_2025 and Tenda IT7-PCS Tenda IT7-PCS<=V2209020914 and Tenda IT7-LCS Tenda IT7-LCS<=V2209020914 and Tenda IT7-PRS Tenda IT7-PRS<=V2209020908.

There are multiple command injection vulnerabilities that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba Networks access point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities result in the ability to execute arbitrary code as a privileged user on the underlying operating system.

pgAdmin <= 8.4 is affected by a Remote Code Execution (RCE) vulnerability through the validate binary path API. This vulnerability allows attackers to execute arbitrary code on the server hosting PGAdmin, posing a severe risk to the database management system's integrity and the security of the underlying data.

A command injection vulnerability has been reported to affect QNAP device running QVR. If exploited, this vulnerability could allow remote attackers to run arbitrary commands. We have already fixed this vulnerability in the following versions of QVR: QVR 5.1.5 build 20210803 and later

A command injection vulnerability has been reported to affect QNAP device running QVR. If exploited, this vulnerability could allow remote attackers to run arbitrary commands. We have already fixed this vulnerability in the following versions of QVR: QVR 5.1.5 build 20210902 and later

An attacker could leverage an API to pass along a malicious file that could then manipulate the process creation command line in MDT AutoSave versions prior to v6.02.06 and run a command line argument. This could then be leveraged to run a malicious process.

Akuvox C315 115.116.2613 allows remote command Injection via the cfgd_server service. The attack vector is sending a payload to port 189 (default root 0.0.0.0).

Command injection vulnerability in QSAN XEVO, SANOS allows remote unauthenticated attackers to execute arbitrary commands. Suggest contacting with QSAN and refer to recommendations in QSAN Document.

A vulnerability, which was classified as critical, was found in Ubiquiti EdgeRouter X 2.0.9-hotfix.6. Affected is an unknown function of the component Static Routing Configuration Handler. The manipulation of the argument next-hop-interface leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The real existence of this vulnerability is still doubted at the moment. VDB-223302 is the identifier assigned to this vulnerability. NOTE: The vendor position is that post-authentication issues are not accepted as vulnerabilities.

Command Injection in GitHub repository microweber/microweber prior to 1.3.3.

A vulnerability was identified in Tenda AC20 16.03.08.12. Affected is the function websFormDefine of the file /goform/telnet of the component Telnet Service. The manipulation leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

In Config Manager, there is a possible command injection due to improper input validation. This could lead to remote escalation of privilege from a proximal attacker with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: A20210009; Issue ID: OSBNB00123234.