An issue was discovered on PHOENIX CONTACT RAD-80211-XD and RAD-80211-XD/HP-BUS devices. Command injection can occur in the WebHMI component.
AP Manager in Innovaphone before 13r2 Service Release 17 allows command injection via a modified service ID during app upload.
D-Link DSL-7740C with firmware DSL7740C.V6.TR069.20211230 was discovered to contain a command injection vulnerability via the ping6 function.
Local user may lead to privilege escalation using Gaia Portal hostnames page.
A vulnerability has been identified in SIMATIC Cloud Connect 7 CC712 (All versions >= V2.0 < V2.1), SIMATIC Cloud Connect 7 CC716 (All versions >= V2.0 < V2.1). The web based management of affected devices does not properly validate user input, making it susceptible to command injection. This could allow an authenticated privileged remote attacker to execute arbitrary code with root privileges.
In Ubiquiti Networks EdgeSwitch X v1.1.0 and prior, a privileged user can execute arbitrary shell commands over the SSH CLI interface. This allows to execute shell commands under the root user.
There are command injection vulnerabilities present in the AirWave application. Certain input fields controlled by an administrative user are not properly sanitized before being parsed by AirWave. If conditions are met, an attacker can obtain command execution on the host.
Vulnerabilities in the ClearPass Policy Manager web-based management interface allow remote authenticated users to run arbitrary commands on the underlying host. A successful exploit could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to complete system compromise in Aruba ClearPass Policy Manager version(s): 6.10.x: 6.10.6 and below; 6.9.x: 6.9.11 and below. Aruba has released upgrades for Aruba ClearPass Policy Manager that address these security vulnerabilities.
Command Injection in EdgeMAX EdgeSwitch prior to 1.8.2 allow an Admin user to execute commands as root.
A vulnerability, which was classified as critical, has been found in D-Link DIR-823X 240126/240802. This issue affects the function sub_41710C of the file /goform/diag_nslookup of the component HTTP POST Request Handler. The manipulation of the argument target_addr leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.
Authenticated command injection vulnerabilities exist in the AOS-10 GW and AOS-8 Controller/Mobility Conductor web-based management interface. Successful exploitation of these vulnerabilities allows an Authenticated attacker to execute arbitrary commands as a privileged user on the underlying operating system.
D-Link DIR-853 A1 FW1.20B07 was discovered to contain a command injection vulnerability in the SetVirtualServerSettings module.
Certain NETGEAR devices are affected by command injection by an authenticated user. This affects R6400v2 before 1.0.4.84, R6700 before 1.0.2.8, R6700v3 before 1.0.4.84, R6900 before 1.0.2.8, and R7900 before 1.0.3.10.
Authenticated command injection vulnerabilities exist in the ArubaOS command line interface. Successful exploitation of these vulnerabilities result in the ability to execute arbitrary commands as a privileged user on the underlying operating system.
A vulnerability has been identified in RUGGEDCOM ROX MX5000 (All versions < V2.16.0), RUGGEDCOM ROX MX5000RE (All versions < V2.16.0), RUGGEDCOM ROX RX1400 (All versions < V2.16.0), RUGGEDCOM ROX RX1500 (All versions < V2.16.0), RUGGEDCOM ROX RX1501 (All versions < V2.16.0), RUGGEDCOM ROX RX1510 (All versions < V2.16.0), RUGGEDCOM ROX RX1511 (All versions < V2.16.0), RUGGEDCOM ROX RX1512 (All versions < V2.16.0), RUGGEDCOM ROX RX1524 (All versions < V2.16.0), RUGGEDCOM ROX RX1536 (All versions < V2.16.0), RUGGEDCOM ROX RX5000 (All versions < V2.16.0). The software-upgrade Url parameter in the web interface of affected devices is vulnerable to command injection due to missing server side input sanitation. This could allow an authenticated privileged remote attacker to execute arbitrary code with root privileges.
A vulnerability has been identified in RUGGEDCOM ROX MX5000 (All versions < V2.16.0), RUGGEDCOM ROX MX5000RE (All versions < V2.16.0), RUGGEDCOM ROX RX1400 (All versions < V2.16.0), RUGGEDCOM ROX RX1500 (All versions < V2.16.0), RUGGEDCOM ROX RX1501 (All versions < V2.16.0), RUGGEDCOM ROX RX1510 (All versions < V2.16.0), RUGGEDCOM ROX RX1511 (All versions < V2.16.0), RUGGEDCOM ROX RX1512 (All versions < V2.16.0), RUGGEDCOM ROX RX1524 (All versions < V2.16.0), RUGGEDCOM ROX RX1536 (All versions < V2.16.0), RUGGEDCOM ROX RX5000 (All versions < V2.16.0). The upgrade-app URL parameter in the web interface of affected devices is vulnerable to command injection due to missing server side input sanitation. This could allow an authenticated privileged remote attacker to execute arbitrary code with root privileges.
A vulnerability has been identified in RUGGEDCOM ROX MX5000 (All versions < V2.16.0), RUGGEDCOM ROX MX5000RE (All versions < V2.16.0), RUGGEDCOM ROX RX1400 (All versions < V2.16.0), RUGGEDCOM ROX RX1500 (All versions < V2.16.0), RUGGEDCOM ROX RX1501 (All versions < V2.16.0), RUGGEDCOM ROX RX1510 (All versions < V2.16.0), RUGGEDCOM ROX RX1511 (All versions < V2.16.0), RUGGEDCOM ROX RX1512 (All versions < V2.16.0), RUGGEDCOM ROX RX1524 (All versions < V2.16.0), RUGGEDCOM ROX RX1536 (All versions < V2.16.0), RUGGEDCOM ROX RX5000 (All versions < V2.16.0). The SCEP server configuration URL parameter in the web interface of affected devices is vulnerable to command injection due to missing server side input sanitation. This could allow an authenticated privileged remote attacker to execute arbitrary code with root privileges.
The Untangle NG firewall 14.2.0 is vulnerable to an authenticated command injection when logged in as an admin user.
A vulnerability has been identified in RUGGEDCOM ROX MX5000 (All versions < V2.16.0), RUGGEDCOM ROX MX5000RE (All versions < V2.16.0), RUGGEDCOM ROX RX1400 (All versions < V2.16.0), RUGGEDCOM ROX RX1500 (All versions < V2.16.0), RUGGEDCOM ROX RX1501 (All versions < V2.16.0), RUGGEDCOM ROX RX1510 (All versions < V2.16.0), RUGGEDCOM ROX RX1511 (All versions < V2.16.0), RUGGEDCOM ROX RX1512 (All versions < V2.16.0), RUGGEDCOM ROX RX1524 (All versions < V2.16.0), RUGGEDCOM ROX RX1536 (All versions < V2.16.0), RUGGEDCOM ROX RX5000 (All versions < V2.16.0). The uninstall-app App-name parameter in the web interface of affected devices is vulnerable to command injection due to missing server side input sanitation. This could allow an authenticated privileged remote attacker to execute arbitrary code with root privileges.
An authenticated remote command injection vulnerability exists in the ArubaOS web-based management interface. Successful exploitation of this vulnerability results in the ability to execute arbitrary commands as a privileged user on the underlying operating system. This allows an attacker to fully compromise the underlying operating system on the device running ArubaOS.
A vulnerability has been identified in RUGGEDCOM ROX MX5000 (All versions < V2.16.0), RUGGEDCOM ROX MX5000RE (All versions < V2.16.0), RUGGEDCOM ROX RX1400 (All versions < V2.16.0), RUGGEDCOM ROX RX1500 (All versions < V2.16.0), RUGGEDCOM ROX RX1501 (All versions < V2.16.0), RUGGEDCOM ROX RX1510 (All versions < V2.16.0), RUGGEDCOM ROX RX1511 (All versions < V2.16.0), RUGGEDCOM ROX RX1512 (All versions < V2.16.0), RUGGEDCOM ROX RX1524 (All versions < V2.16.0), RUGGEDCOM ROX RX1536 (All versions < V2.16.0), RUGGEDCOM ROX RX5000 (All versions < V2.16.0). The install-app URL parameter in the web interface of affected devices is vulnerable to command injection due to missing server side input sanitation. This could allow an authenticated privileged remote attacker to execute arbitrary code with root privileges.
A vulnerability has been identified in RUGGEDCOM ROX MX5000 (All versions < V2.16.0), RUGGEDCOM ROX MX5000RE (All versions < V2.16.0), RUGGEDCOM ROX RX1400 (All versions < V2.16.0), RUGGEDCOM ROX RX1500 (All versions < V2.16.0), RUGGEDCOM ROX RX1501 (All versions < V2.16.0), RUGGEDCOM ROX RX1510 (All versions < V2.16.0), RUGGEDCOM ROX RX1511 (All versions < V2.16.0), RUGGEDCOM ROX RX1512 (All versions < V2.16.0), RUGGEDCOM ROX RX1524 (All versions < V2.16.0), RUGGEDCOM ROX RX1536 (All versions < V2.16.0), RUGGEDCOM ROX RX5000 (All versions < V2.16.0). The SCEP CA Certificate Name parameter in the web interface of affected devices is vulnerable to command injection due to missing server side input sanitation. This could allow an authenticated privileged remote attacker to execute arbitrary code with root privileges.
Authenticated command injection vulnerabilities exist in the ArubaOS command line interface. Successful exploitation of these vulnerabilities result in the ability to execute arbitrary commands as a privileged user on the underlying operating system.
A command injection vulnerability exists in RTS VLink Virtual Matrix Software Versions v5 (< 5.7.6) and v6 (< 6.5.0) that allows an attacker to perform arbitrary code execution via the admin web interface.
A critical remote code execution (RCE) vulnerability exists in the web-based management interface of GatesAir Maxiva UAXT, VAXT transmitters when debugging mode is enabled. An attacker with a valid session ID (sess_id) can send specially crafted POST requests to the /json endpoint, enabling arbitrary command execution on the underlying system. This vulnerability can lead to full system compromise, including unauthorized access, privilege escalation, and potentially full device takeover.
A vulnerability in the vManage web-based UI (Web UI) in the Cisco SD-WAN Solution could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the vManage Web UI. A successful exploit could allow the attacker to execute commands with root privileges.
TN-5900 Series firmware versions v3.3 and prior are vulnerable to the command-injection vulnerability. This vulnerability stems from insufficient input validation and improper authentication in the certification-generation function, which could potentially allow malicious users to execute remote code on affected devices.
Authenticated command injection vulnerability in the command line interface of a network management service. Successful exploitation of this vulnerability could allow an attacker to execute arbitrary commands as a privileged user on the underlying operating system.
A vulnerability has been identified in RUGGEDCOM ROX MX5000 (All versions < 2.15.1), RUGGEDCOM ROX MX5000RE (All versions < 2.15.1), RUGGEDCOM ROX RX1400 (All versions < 2.15.1), RUGGEDCOM ROX RX1500 (All versions < 2.15.1), RUGGEDCOM ROX RX1501 (All versions < 2.15.1), RUGGEDCOM ROX RX1510 (All versions < 2.15.1), RUGGEDCOM ROX RX1511 (All versions < 2.15.1), RUGGEDCOM ROX RX1512 (All versions < 2.15.1), RUGGEDCOM ROX RX1524 (All versions < 2.15.1), RUGGEDCOM ROX RX1536 (All versions < 2.15.1), RUGGEDCOM ROX RX5000 (All versions < 2.15.1). Affected devices do not properly validate user input, making them susceptible to command injection. An attacker with access to either the shell or the web CLI with administrator privileges could access the underlying operating system as the root user.
A vulnerability has been identified in CP-8031 MASTER MODULE (All versions < CPCI85 V05), CP-8050 MASTER MODULE (All versions < CPCI85 V05). The web interface of affected devices is vulnerable to command injection due to missing server side input sanitation. This could allow an authenticated privileged remote attacker to execute arbitrary code with root privileges.
MXsecurity version 1.0 is vulnearble to command injection vulnerability. This vulnerability has been reported in the SSH CLI program, which can be exploited by attackers who have gained authorization privileges. The attackers can break out of the restricted shell and subsequently execute arbitrary code.
A vulnerability in the NX-API feature of Cisco NX-OS Software could allow an authenticated, remote attacker to execute arbitrary commands with root privileges. The vulnerability is due to incorrect input validation of user-supplied data by the NX-API subsystem. An attacker could exploit this vulnerability by sending malicious HTTP or HTTPS packets to the management interface of an affected system that has the NX-API feature enabled. A successful exploit could allow the attacker to perform a command-injection attack and execute arbitrary commands with root privileges. Note: NX-API is disabled by default. MDS 9000 Series Multilayer Switches are affected running software versions prior to 8.1(1b) and 8.2(3). Nexus 3000 Series Switches are affected running software versions prior to 7.0(3)I4(9) and 7.0(3)I7(4). Nexus 3500 Platform Switches are affected running software versions prior to 7.0(3)I7(4). Nexus 2000, 5500, 5600, and 6000 Series Switches are affected running software versions prior to 7.3(4)N1(1). Nexus 9000 Series Switches in Standalone NX-OS Mode are affected running software versions prior to 7.0(3)I4(9) and 7.0(3)I7(4). Nexus 7000 and 7700 Series Switches are affected running software versions prior to 7.3(3)D1(1) and 8.2(3).
A vulnerability in the web-based management interface of Cisco AsyncOS Software for Cisco Secure Email Gateway and Cisco Secure Web Appliance could allow an authenticated, remote attacker to perform command injection attacks against an affected device. The attacker must authenticate with valid administrator credentials. This vulnerability is due to insufficient validation of XML configuration files by an affected device. An attacker could exploit this vulnerability by uploading a crafted XML configuration file. A successful exploit could allow the attacker to inject commands to the underlying operating system with root privileges.
TN-4900 Series firmware versions v1.2.4 and prior and TN-5900 Series firmware versions v3.3 and prior are vulnerable to the command injection vulnerability. This vulnerability stems from inadequate input validation in the certificate management function, which could potentially allow malicious users to execute remote code on affected devices.
Totolink A830R V5.9c.4729_B20191112, Totolink A3100R V4.1.2cu.5050_B20200504, Totolink A950RG V4.1.2cu.5161_B20200903, Totolink A800R V4.1.2cu.5137_B20200730, Totolink A3000RU V5.9c.5185_B20201128, Totolink A810R V4.1.2cu.5182_B20201026 were discovered to contain a command injection vulnerability.
A command injection was identified in PRTG 23.2.84.1566 and earlier versions in the Dicom C-ECHO sensor where an authenticated user with write permissions could abuse the debug option to write new files that could potentially get executed by the EXE/Script sensor. The severity of this vulnerability is high and received a score of 7.2 CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H
A vulnerability, which was classified as critical, has been found in Tenda AC8, AC10 and AC18 16.03.10.20. Affected by this issue is some unknown functionality of the file /goform/telnet of the component HTTP Request Handler. The manipulation leads to command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.
There is an OS Command Injection in Nexus Repository Manager <= 2.14.14 (bypass CVE-2019-5475) that could allow an attacker a Remote Code Execution (RCE). All instances using CommandLineExecutor.java with user-supplied data is vulnerable, such as the Yum Configuration Capability.
An OS command injection vulnerability in the admin web console of Ivanti CSA before version 5.0.2 allows a remote authenticated attacker with admin privileges to obtain remote code execution.
A command injection vulnerability was identified in PRTG 23.2.84.1566 and earlier versions in the HL7 sensor where an authenticated user with write permissions could abuse the debug option to write new files that could potentially get executed by the EXE/Script sensor. The severity of this vulnerability is high and received a score of 7.2 CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H
There is a command injection vulnerability in the Linksys WRT54GL router with firmware version 4.30.18.006. If an attacker gains web management privileges, they can inject commands into the post request parameters wl_ant, wl_rate, WL_atten_ctl, ttcp_num, ttcp_size in the httpd s Start_EPI() function, thereby gaining shell privileges.
A vulnerability in the Connect Mobility Router component of MiVoice Connect versions 9.6.2208.101 and earlier could allow an authenticated attacker with internal network access to conduct a command injection attack due to insufficient restriction on URL parameters.
Command injection vulnerability in nw_interface.html in SHARP multifunction printers (MFPs)'s Digital Full-color Multifunctional System 202 or earlier, 120 or earlier, 600 or earlier, 121 or earlier, 500 or earlier, 402 or earlier, 790 or earlier, and Digital Multifunctional System (Monochrome) 200 or earlier, 211 or earlier, 102 or earlier, 453 or earlier, 400 or earlier, 202 or earlier, 602 or earlier, 500 or earlier, 401 or earlier allows remote attackers to execute arbitrary commands via unspecified vectors.
Atos Unify OpenScape SBC 10 before 10R3.1.3, OpenScape Branch 10 before 10R3.1.2, and OpenScape BCF 10 before 10R10.7.0 allow remote authenticated admins to inject commands.
The web-based configuration interface of the TP-Link M7350 V3 with firmware before 190531 is affected by several post-authentication command injection vulnerabilities.
Multiple vulnerabilities in the web-based user interface (Web UI) of Cisco IOS XE Software could allow an authenticated, remote attacker to execute commands with elevated privileges on the affected device. For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability, which was classified as critical, was found in TOTOLINK A3600R 4.1.2cu.5182_B20201102. This affects the function setdeviceName of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument deviceMac/deviceName leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-272595. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability in the WebUI of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to inject and execute arbitrary commands with vmanage user privileges on an affected system. The vulnerability is due to insufficient input validation of data parameters for certain fields in the affected solution. An attacker could exploit this vulnerability by configuring a malicious username on the login page of the affected solution. A successful exploit could allow the attacker to inject and execute arbitrary commands with vmanage user privileges on an affected system.
Multiple vulnerabilities in the web-based user interface (Web UI) of Cisco IOS XE Software could allow an authenticated, remote attacker to execute commands with elevated privileges on the affected device. For more information about these vulnerabilities, see the Details section of this advisory.
Several potential command injections vulnerabilities exist in the AT command interface of ALEOS before 4.11.0, and 4.9.4.