Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects R6400v2 before 1.0.4.84, R6700 before 1.0.2.8, R6700v3 before 1.0.4.84, R6900 before 1.0.2.8, and R7900 before 1.0.3.10.

NETGEAR R7800 devices before 1.0.2.68 are affected by remote code execution by unauthenticated attackers.

Netgear R7000P V1.3.0.8 is vulnerable to Buffer Overflow in /usr/sbin/httpd via parameter enable_band_steering.

Netgear R7000P V1.3.1.64 is vulnerable to Buffer Overflow via parameter openvpn_server_ip.

Netgear R7000P V1.3.1.64 is vulnerable to Buffer Overflow via parameter openvpn_push1.

Netgear R7000P V1.3.1.64 is vulnerable to Buffer Overflow via parameters KEY1 and KEY2.

SNMP service in Atmel 802.11b VNET-B Access Point 1.3 and earlier, as used in Netgear ME102 and Linksys WAP11, accepts arbitrary community strings with requested MIB modifications, which allows remote attackers to obtain sensitive information such as WEP keys, cause a denial of service, or gain access to the network.

Certain NETGEAR devices are affected by incorrect configuration of security settings. This affects WAC120 before 2.1.7, WAC505 before 5.0.5.4, WAC510 before 5.0.5.4, WNAP320 before 3.7.11.4, WNAP210v2 before 3.7.11.4, WNDAP350 before 3.7.11.4, WNDAP360 before 3.7.11.4, WNDAP660 before 3.7.11.4, WNDAP620 before 2.1.7, WND930 before 2.1.5, and WN604 before 3.3.10.

Certain NETGEAR devices are affected by authentication bypass. This affects WAC505 before 5.0.0.17 and WAC510 before 5.0.0.17.

An issue was discovered on NETGEAR WNR1000V4 1.1.0.54 devices. The web management interface (setup.cgi) has an authentication bypass and other problems that ultimately allow an attacker to remotely compromise the device from a malicious webpage. The attacker sends an FW_remote.htm&todo=cfg_init request without a cookie, reads the Set-Cookie header in the 401 Unauthorized response, and then repeats the FW_remote.htm&todo=cfg_init request with the specified cookie.

A Symlink Traversal vulnerability exists in NETGEAR Centria WNDR4700 Firmware 1.0.0.34.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects WAC505 before 5.0.5.4, WAC510 before 5.0.5.4, WAC120 before 2.1.7, WN604 before 3.3.10, WNAP320 before 3.7.11.4, WNAP210v2 before 3.7.11.4, WNDAP350 before 3.7.11.4, WNDAP360 before 3.7.11.4, WNDAP660 before 3.7.11.4, WNDAP620 before 2.1.7, and WND930 before 2.1.5.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects WAC505 before 5.0.0.17 and WAC510 before 5.0.0.17.

Symlink Traversal vulnerability in NETGEAR WNR3500U and WNR3500L due to misconfiguration in the SMB service.

Netgear WNR1000v3 with firmware before 1.0.2.60 contains an Authentication Bypass via the NtgrBak key.

An Authentication Bypass vulnerability exists in NETGEAR Centria WNDR4700 Firmware 1.0.0.34 in http://<router_ip>/apply.cgi?/hdd_usr_setup.htm that when visited by any user, authenticated or not, causes the router to no longer require a password to access the web administration portal.

NETGEAR FVS318 running firmware 2.4, and possibly other versions, allows remote attackers to bypass the filters using hex encoded URLs, as demonstrated using a hex encoded file extension.

A vulnerability was found in Netgear WNR614 1.1.0.28_1.0.1WW. It has been classified as critical. This affects an unknown part of the component URL Handler. The manipulation with the input %00currentsetting.htm leads to improper authentication. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This issue appears to have been circulating as an 0day since 2024.

A vulnerability, which was classified as very critical, was found in Netgear DGND3700 1.1.00.15_1.00.15NA. This affects an unknown part of the file /BRS_top.html of the component Basic Authentication. The manipulation leads to improper authentication. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. Other products might be affected as well. The vendor was contacted early about this disclosure.

Cross-site scripting vulnerability in web administration interface for NetGear RT314 and RT311 Gateway Routers allows remote attackers to execute arbitrary script on another client via a URL that contains the script.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects D3600 before 1.0.0.76, D6000 before 1.0.0.78, D6200 before 1.1.00.32, D7000 before 1.0.1.68, D7800 before 1.0.1.56, DM200 before 1.0.0.61, EX2700 before 1.0.1.52, EX6100v2 before 1.0.1.76, EX6150v2 before 1.0.1.76, EX6200v2 before 1.0.1.74, EX6400 before 1.0.2.140, EX7300 before 1.0.2.140, EX8000 before 1.0.1.186, JR6150 before 1.0.1.18, PR2000 before 1.0.0.28, R6020 before 1.0.0.38, R6050 before 1.0.1.18, R6080 before 1.0.0.38, R6120 before 1.0.0.46, R6220 before 1.1.0.80, R6230 before 1.1.0.80, R6260 before 1.1.0.40, R6700v2 before 1.2.0.36, R6800 before 1.2.0.36, R6900v2 before 1.2.0.36, R7500v2 before 1.0.3.40, R7800 before 1.0.2.62, R8900 before 1.0.4.12, R9000 before 1.0.4.12, RBK20 before 2.3.0.28, RBR20 before 2.3.0.28, RBS20 before 2.3.0.28, RBK40 before 2.3.0.28, RBR40 before 2.3.0.28, RBS40 before 2.3.0.28, RBK50 before 2.3.0.32, RBR50 before 2.3.0.32, RBS50 before 2.3.0.32, WN2000RPTv3 before 1.0.1.34, WN3000RPv2 before 1.0.0.78, WN3000RPv2 before 1.0.0.78, WN3000RPv3 before 1.0.2.78, WN3100RPv2 before 1.0.0.66, WNR2000v5 before 1.0.0.70, WNR2020 before 1.1.0.62, XR450 before 2.3.2.32, and XR500 before 2.3.2.32.

The default configuration of the NETGEAR ProSafe FVS318N firewall enables web-based administration on the WAN interface, which allows remote attackers to establish an HTTP connection and possibly have unspecified other impact via unknown vectors.

Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects CBR40 before 2.5.0.10, D6220 before 1.0.0.60, D6400 before 1.0.0.94, D7000v2 before 1.0.0.62, D8500 before 1.0.3.50, DC112A before 1.0.0.48, DGN2200v4 before 1.0.0.114, EAX20 before 1.0.0.36, EAX80 before 1.0.1.62, EX3700 before 1.0.0.84, EX3800 before 1.0.0.84, EX3920 before 1.0.0.84, EX6000 before 1.0.0.44, EX6100 before 1.0.2.28, EX6120 before 1.0.0.54, EX6130 before 1.0.0.36, EX6150 before 1.0.0.46, EX6200 before 1.0.3.94, EX6920 before 1.0.0.54, EX7000 before 1.0.1.90, EX7500 before 1.0.0.68, MK62 before 1.0.5.102, MR60 before 1.0.5.102, MS60 before 1.0.5.102, R6250 before 1.0.4.42, R6300v2 before 1.0.4.42, R6400 before 1.0.1.62, R6400v2 before 1.0.4.98, R6700v3 before 1.0.4.98, R6700 before 1.0.2.16, R6900P before 1.3.2.124, R6900 before 1.0.2.16, R7000 before 1.0.11.106, R7000P before 1.3.2.124, R7100LG before 1.0.0.56, R7850 before 1.0.5.60, R7900 before 1.0.4.26, R7900P before 1.4.1.62, R7960P before 1.4.1.62, R8000 before 1.0.4.58, R8000P before 1.4.1.62, R8300 before 1.0.2.134, R8500 before 1.0.2.134, RAX15 before 1.0.1.64, RAX20 before 1.0.1.64, RAX200 before 1.0.2.102, RAX45 before 1.0.2.32, RAX50 before 1.0.2.32, RAX75 before 1.0.3.102, RAX80 before 1.0.3.102, RBK752 before 3.2.16.6, RBR750 before 3.2.16.6, RBS750 before 3.2.16.6, RBK842 before 3.2.16.6, RBR840 before 3.2.16.6, RBS840 before 3.2.16.6, RBK852 before 3.2.16.6, RBR850 before 3.2.16.6, RBS850 before 3.2.16.6, RBS40V-200 before 1.0.0.46, RBW30 before 2.5.0.4, RS400 before 1.5.0.48, WN2500RPv2 before 1.0.1.56, WN3500RP before 1.0.0.28, WNDR3400v3 before 1.0.1.32, WNR1000v3 before 1.0.2.78, WNR2000v2 before 1.2.0.12, WNR3500Lv2 before 1.2.0.62, and XR300 before 1.0.3.50.

Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects AC2100 before 1.2.0.72, AC2400 before 1.2.0.72, AC2600 before 1.2.0.72, CBK40 before 2.5.0.10, CBR40 before 2.5.0.10, D7800 before 1.0.1.58, EAX20 before 1.0.0.36, EAX80 before 1.0.1.62, EX7500 before 1.0.0.68, MK62 before 1.0.5.102, MR60 before 1.0.5.102, MS60 before 1.0.5.102, R6120 before 1.0.0.70, R6220 before 1.1.0.100, R6230 before 1.1.0.100, R6260 before 1.1.0.76, R6330 before 1.1.0.76, R6350 before 1.1.0.76, R6400 before 1.0.1.62, R6400v2 before 1.0.4.98, R6700 before 1.0.2.16, R6700v2 before 1.2.0.72, R6700v3 before 1.0.4.98, R6800 before 1.2.0.72, R6850 before 1.1.0.76, R6900P before 1.3.2.124, R6900 before 1.0.2.16, R6900v2 before 1.2.0.72, R7000 before 1.0.11.106, R7000P before 1.3.2.124, R7200 before 1.2.0.72, R7350 before 1.2.0.72, R7400 before 1.2.0.72, R7450 before 1.2.0.72, R7800 before 1.0.2.74, R7850 before 1.0.5.60, R7900 before 1.0.4.26, R7900P before 1.4.1.62, R7960P before 1.4.1.62, R8000 before 1.0.4.58, R8000P before 1.4.1.62, R8900 before 1.0.5.24, R9000 before 1.0.5.24, RAX120 before 1.0.1.136, RAX15 before 1.0.1.64, RAX20 before 1.0.1.64, RAX200 before 1.0.2.102, RAX45 before 1.0.2.64, RAX50 before 1.0.2.64, RAX75 before 1.0.3.102, RAX80 before 1.0.3.102, RBK12 before 2.6.1.44, RBR10 before 2.6.1.44, RBS10 before 2.6.1.44, RBK20 before 2.6.1.38, RBR20 before 2.6.1.36, RBS20 before 2.6.1.38, RBK40 before 2.6.1.38, RBR40 before 2.6.1.36, RBS40 before 2.6.1.38, RBK50 before 2.6.1.40, RBR50 before 2.6.1.40, RBS50 before 2.6.1.40, RBK752 before 3.2.16.6, RBR750 before 3.2.16.6, RBS750 before 3.2.16.6, RBK752 before 3.2.16.6, RBR750 before 3.2.16.6, RBS750 before 3.2.16.6, RBK842 before 3.2.16.6, RBR840 before 3.2.16.6, RBS840 before 3.2.16.6, RBK852 before 3.2.16.6, RBR850 before 3.2.16.6, RBS850 before 3.2.16.6, RS400 before 1.5.0.48, XR300 before 1.0.3.50, XR450 before 2.3.2.66, XR500 before 2.3.2.66, and XR700 before 1.0.1.34.

NETGEAR NMS300 devices before 1.6.0.27 are affected by command injection by an unauthenticated attacker.

Netgear EX8000 V1.0.0.126 is vulnerable to Command Injection via the Iface parameter in the action_wireless function.

In Netgear RAX30 V1.0.10.94, a PHP-FPM misconfiguration vulnerability is caused by not following the specification to only limit FPM to .php extensions. An attacker may exploit this by uploading malicious scripts disguised with alternate extensions and tricking the web server into executing them as PHP, bypassing security mechanisms based on file extension filtering. This may lead to remote code execution (RCE), information disclosure, or full system compromise.

(1) boardData102.php, (2) boardData103.php, (3) boardDataJP.php, (4) boardDataNA.php, and (5) boardDataWW.php in Netgear WN604 before 3.3.3 and WN802Tv2, WNAP210v2, WNAP320, WNDAP350, WNDAP360, and WNDAP660 before 3.5.5.0 allow remote attackers to execute arbitrary commands.

A vulnerability, which was classified as critical, has been found in Netgear EX6200 1.0.3.94. This issue affects the function sub_3D0BC. The manipulation of the argument host leads to buffer overflow. The attack may be initiated remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Netgear EX6200 1.0.3.94. It has been declared as critical. This vulnerability affects the function sub_54340. The manipulation of the argument host leads to buffer overflow. The attack can be initiated remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Netgear EX6200 1.0.3.94 and classified as critical. Affected by this issue is the function sub_503FC. The manipulation of the argument host leads to buffer overflow. The attack may be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as critical has been found in Netgear JWNR2000v2 1.0.0.11. Affected is the function check_language_file. The manipulation of the argument host leads to buffer overflow. It is possible to launch the attack remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, was found in Netgear JWNR2000v2 1.0.0.11. This affects the function sub_41A914. The manipulation of the argument host leads to buffer overflow. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, was found in Netgear EX6200 1.0.3.94. Affected is the function sub_41940. The manipulation of the argument host leads to buffer overflow. It is possible to launch the attack remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, has been found in Netgear JWNR2000v2 1.0.0.11. Affected by this issue is the function get_cur_lang_ver. The manipulation of the argument host leads to buffer overflow. The attack may be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as critical was found in Netgear JWNR2000v2 1.0.0.11. Affected by this vulnerability is the function default_version_is_new. The manipulation of the argument host leads to buffer overflow. The attack can be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, has been found in Netgear EX6120 1.0.3.94. Affected by this issue is the function sub_30394. The manipulation of the argument host leads to buffer overflow. The attack may be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in Netgear EX6200 1.0.3.94 and classified as critical. This vulnerability affects the function sub_3C8EC. The manipulation of the argument host leads to buffer overflow. The attack can be initiated remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, was found in Netgear EX6200 1.0.3.94. This affects the function sub_3C03C. The manipulation of the argument host leads to buffer overflow. It is possible to initiate the attack remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Netgear JWNR2000v2 1.0.0.11. It has been declared as critical. Affected by this vulnerability is the function cmd_wireless. The manipulation of the argument host leads to command injection. The attack can be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Netgear EX6200 1.0.3.94. It has been classified as critical. This affects the function sub_54014. The manipulation of the argument host leads to buffer overflow. It is possible to initiate the attack remotely. The vendor was contacted early about this disclosure but did not respond in any way.

Certain NETGEAR devices are affected by authentication bypass. This affects D6200 before 1.1.00.36, D7000 before 1.0.1.74, PR2000 before 1.0.0.30, R6020 before 1.0.0.42, R6050 before 1.0.1.22, JR6150 before 1.0.1.22, R6080 before 1.0.0.42, R6120 before 1.0.0.66, R6220 before 1.1.0.100, R6230 before 1.1.0.100, R6260 before 1.1.0.64, R6700v2 before 1.2.0.62, R6800 before 1.2.0.62, R69002 before 1.2.0.62, and WNR2020 before 1.1.0.62.

Certain NETGEAR devices are affected by authentication bypass. This affects D6200 before 1.1.00.40, D7000 before 1.0.1.78, R6020 before 1.0.0.42, R6080 before 1.0.0.42, R6050 before 1.0.1.26, JR6150 before 1.0.1.26, R6120 before 1.0.0.66, R6220 before 1.1.0.100, R6260 before 1.1.0.66, R6700v2 before 1.2.0.62, R6800 before 1.2.0.62, R6900v2 before 1.2.0.62, AC2100 before 1.2.0.62, AC2400 before 1.2.0.62, AC2600 before 1.2.0.62, R7450 before 1.2.0.62, and WNR2020 before 1.1.0.62.

Buffer Overflow vulnerability in Netgear- R61 router V1.0.1.28 allows a remote attacker to execute arbitrary code via the QUERY_STRING key value

Netgear DC112A V1.0.0.64 has an OS command injection vulnerability in the usb_adv.cgi, which allows remote attackers to execute arbitrary commands via parameter "deviceName" passed to the binary through a POST request.

Netgear N300 wireless router wnr2000v4-V1.0.0.70 is vulnerable to Buffer Overflow via uhttpd. There is a stack overflow vulnerability caused by strcpy.

Netgear R7100LG 1.0.0.78 was discovered to contain a command injection vulnerability via the password parameter at usb_remote_invite.cgi.