GE GEMNet License server (EchoServer) all current versions are affected these devices use default or hard-coded credentials. Successful exploitation of this vulnerability may allow a remote attacker to bypass authentication and gain access to the affected devices.

Authentication Bypass by Primary Weakness vulnerability in DTS Electronics Redline Router firmware allows Authentication Bypass.This issue affects Redline Router: before 7.17.

In macOS High Sierra before 10.13.3, Security Update 2018-001 Sierra, and Security Update 2018-001 El Capitan, a logic error existed in the validation of credentials. This was addressed with improved credential validation.

Session fixation vulnerability in onelook courts on-line allows remote attackers to hijack web sessions by setting a PHPSESSID cookie.

Authentication bypass vulnerability in Trend Micro Mobile Security (Enterprise) versions before 9.7 Patch 3 allows attackers to access a specific part of the console using a blank password.

Microsoft .NET Framework 4.5 does not properly create policy requirements for custom Windows Communication Foundation (WCF) endpoint authentication in certain situations involving passwords over HTTPS, which allows remote attackers to bypass authentication by sending queries to an endpoint, aka "Authentication Bypass Vulnerability."

Remote manipulations with language pack updater lead to NTLM-relay attack for system user in Gemalto's HASP SRM, Sentinel HASP and Sentinel LDK products prior to Sentinel LDK RTE version 7.55.

A vulnerability in the implementation of the Locator/ID Separation Protocol (LISP) in Cisco IOS XE 3.2 through 16.5 could allow an unauthenticated, remote attacker using an x tunnel router to bypass authentication checks performed when registering an Endpoint Identifier (EID) to a Routing Locator (RLOC) in the map server/map resolver (MS/MR). The vulnerability is due to a logic error introduced via a code regression for the affected software. An attacker could exploit this vulnerability by sending specific valid map-registration requests, which will be accepted by the MS/MR even if the authentication keys do not match, to the affected software. A successful exploit could allow the attacker to inject invalid mappings of EIDs to RLOCs in the MS/MR of the affected software. This vulnerability affects Cisco devices that are configured with LISP acting as an IPv4 or IPv6 map server. This vulnerability affects Cisco IOS XE Software release trains 3.9E and Everest 16.4. Cisco Bug IDs: CSCvc18008.

A vulnerability classified as critical has been found in SourceCodester Employee Task Management System 1.0. Affected is an unknown function of the file changePasswordForEmployee.php. The manipulation leads to improper authentication. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. VDB-221454 is the identifier assigned to this vulnerability.

It was discovered that the api/storage web interface in Unitrends Backup (UB) before 10.0.0 has an issue in which one of its input parameters was not validated. A remote attacker could use this flaw to bypass authentication and execute arbitrary commands with root privilege on the target system.

Zoho ManageEngine PAM360 before build 5303 allows attackers to modify a few aspects of application state because of a filter bypass in which authentication is not required.

An Improper Authentication issue was discovered in Advantech WebAccess versions prior to V8.2_20170817. Specially crafted requests allow a possible authentication bypass that could allow remote code execution.

It was discovered that the bpserverd proprietary protocol in Unitrends Backup (UB) before 10.0.0, as invoked through xinetd, has an issue in which its authentication can be bypassed. A remote attacker could use this issue to execute arbitrary commands with root privilege on the target system.

A vulnerability classified as critical was found in Telecommunication Software SAMwin Contact Center Suite 5.1. This vulnerability affects the function passwordScramble in the library SAMwinLIBVB.dll of the component Password Handler. Incorrect implementation of a hashing function leads to predictable authentication possibilities. Upgrading to version 6.2 is able to address this issue. It is recommended to upgrade the affected component.

OpUtils in Zoho ManageEngine OpManager 12.5 before 125490 mishandles authentication for a few audit directories.

OSU Open Source Lab VNCAuthProxy through 1.1.1 is affected by an vncap/vnc/protocol.py VNCServerAuthenticator authentication-bypass vulnerability that could allow a malicious actor to gain unauthorized access to a VNC session or to disconnect a legitimate user from a VNC session. A remote attacker with network access to the proxy server could leverage this vulnerability to connect to VNC servers protected by the proxy server without providing any authentication credentials. Exploitation of this issue requires that the proxy server is currently accepting connections for the target VNC server.

A vulnerability was found in SourceCodester Online Pizza Ordering System 1.0. It has been classified as critical. This affects an unknown part of the file admin/ajax.php?action=save_user of the component Password Change Handler. The manipulation leads to improper authentication. It is possible to initiate the attack remotely. The identifier VDB-223305 was assigned to this vulnerability.

HashiCorp Vault and Vault Enterprise versions 0.8.3 and newer, when configured with the GCP GCE auth method, may be vulnerable to authentication bypass. Fixed in 1.2.5, 1.3.8, 1.4.4, and 1.5.1.

A vulnerability was found in jeecg-boot 3.5.0 and classified as critical. This issue affects some unknown processing of the component API Documentation. The manipulation leads to improper authentication. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-224699.

OmniAuth OmnitAuth-SAML 1.9.0 and earlier may incorrectly utilize the results of XML DOM traversal and canonicalization APIs in such a way that an attacker may be able to manipulate the SAML data without invalidating the cryptographic signature, allowing the attack to potentially bypass authentication to SAML service providers.

Sangoma NetBorder / Vega Session Controller before 2.3.12-80-GA allows remote attackers to execute arbitrary commands via the web interface.

Improper Authentication vulnerability in B&R Industrial Automation B&R VC4 (VNC-Server modules).  This vulnerability may allow an unauthenticated network-based attacker to bypass the authentication mechanism of the VC4 visualization on affected devices. The impact of this vulnerability depends on the functionality provided in the visualization. This issue affects B&R VC4: from 3.* through 3.96.7, from 4.0* through 4.06.7, from 4.1* through 4.16.3, from 4.2* through 4.26.8, from 4.3* through 4.34.6, from 4.4* through 4.45.1, from 4.5* through 4.45.3, from 4.7* through 4.72.9.

OneLogin PythonSAML 2.3.0 and earlier may incorrectly utilize the results of XML DOM traversal and canonicalization APIs in such a way that an attacker may be able to manipulate the SAML data without invalidating the cryptographic signature, allowing the attack to potentially bypass authentication to SAML service providers.

An Authentication Bypass Vulnerability exists in DELL SonicWALL Analyzer 7.0, Global Management System (GMS) 4.1, 5.0, 5.1, 6.0, and 7.0; Universal Management Appliance (UMA) 5.1, 6.0, and 7.0 and ViewPoint 4.1, 5.0, 5.1, and 6.0 via the skipSessionCheck parameter to the UMA interface (/appliance/), which could let a remote malicious user obtain access to the root account.

Cisco Unified Computing System (UCS) 1.x before 1.4(4) and 2.x before 2.0(2m) allows remote attackers to bypass KVM authentication via a crafted authentication request to a Cisco Integrated Management Controller (IMC), aka Bug ID CSCts53746.

A vulnerability classified as critical was found in Mediabridge Medialink. This vulnerability affects unknown code of the file /index.asp. The manipulation leads to improper authentication. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-210700.

It is possible to enumerate access card credentials via an unauthenticated network connection to the server in versions of Command Centre v8.20 prior to v8.20.1166(MR3), versions of 8.10 prior to v8.10.1211(MR5), versions of 8.00 prior to v8.00.1228(MR6), all versions of 7.90 and earlier. These credentials can then be used to encode low security cards to be used by the system where insecure card technologies are supported.

The GateIn Portal export/import gadget in JBoss Enterprise Portal Platform 5.2.2 does not properly check authentication when importing Zip files, which allows remote attackers to modify site contents, remove the site, or alter the access controls for portlets.

A vulnerability, which was classified as critical, was found in SourceCodester Medicine Tracker System 1.0. This affects an unknown part of the file Users.php?f=save_user. The manipulation of the argument firstname/middlename/lastname/username/password leads to improper authentication. It is possible to initiate the attack remotely. The associated identifier of this vulnerability is VDB-223311.

OneLogin Ruby-SAML 1.6.0 and earlier may incorrectly utilize the results of XML DOM traversal and canonicalization APIs in such a way that an attacker may be able to manipulate the SAML data without invalidating the cryptographic signature, allowing the attack to potentially bypass authentication to SAML service providers.

lib/MT/Upgrade.pm in mt-upgrade.cgi in Movable Type 4.2x and 4.3x through 4.38 does not require authentication for requests to database-migration functions, which allows remote attackers to conduct eval injection and SQL injection attacks via crafted parameters, as demonstrated by an eval injection attack against the core_drop_meta_for_table function, leading to execution of arbitrary Perl code.

Paid To Read Script 2.0.5 has authentication bypass in the admin panel via a direct request, as demonstrated by the admin/viewvisitcamp.php fn parameter and the admin/userview.php uid parameter.

Adobe ColdFusion 9.0, 9.0.1, and 9.0.2, when a password is not configured, allows remote attackers to bypass authentication and possibly execute arbitrary code via unspecified vectors, as exploited in the wild in January 2013.

Affected versions of Smartstore have a missing WebApi Authentication attribute. This vulnerability affects Smartstore shops in version 4.0.0 & 4.0.1 which have installed and activated the Web API plugin. Users of Smartstore 4.0.0 and 4.0.1 must merge their repository with 4.0.x or overwrite the file SmartStore.Web.Framework in the */bin* directory of the deployed shop with this file. As a workaround without updating uninstall the Web API plugin to close this vulnerability.

The UserPro plugin before 4.9.17.1 for WordPress, when used on a site with the "admin" username, allows remote attackers to bypass authentication and obtain administrative access via a "true" value for the up_auto_log parameter in the QUERY_STRING to the default URI.

In TYPO3 installations with the "mediace" extension from version 7.6.2 and before version 7.6.5, it has been discovered that an internal verification mechanism can be used to generate arbitrary checksums. The allows to inject arbitrary data having a valid cryptographic message authentication code and can lead to remote code execution. To successfully exploit this vulnerability, an attacker must have access to at least one `Extbase` plugin or module action in a TYPO3 installation. This is fixed in version 7.6.5 of the "mediace" extension for TYPO3.

CWE - CWE-287: Improper Authentication vulnerability in SUSE Linux Enterprise Server 15 SP 3; openSUSE Tumbleweed allows local attackers to execute arbitrary code via salt without the need to specify valid credentials. This issue affects: SUSE Linux Enterprise Server 15 SP 3 salt versions prior to 3002.2-3. openSUSE Tumbleweed salt version 3002.2-2.1 and prior versions. This issue affects: SUSE Linux Enterprise Server 15 SP 3 salt versions prior to 3002.2-3. openSUSE Tumbleweed salt version 3002.2-2.1 and prior versions.

In Joomla! before 3.8.2, a bug allowed third parties to bypass a user's 2-factor authentication method.

An attacker can log into the local Niagara platform (Niagara AX Framework Versions 3.8 and prior or Niagara 4 Framework Versions 4.4 and prior) using a disabled account name and a blank password, granting the attacker administrator access to the Niagara system.

Authentication Bypass by Alternate Name vulnerability in DTS Electronics Redline Router firmware allows Authentication Bypass.This issue affects Redline Router: before 7.17.

ext_find_user in eXtplorer through 2.1.2 allows remote attackers to bypass authentication via a password[]= (aka an empty array) in an action=login request to index.php.

Google Chrome before 25.0.1364.152 does not properly manage the interaction between the browser process and renderer processes during authorization of the loading of a plug-in, which makes it easier for remote attackers to bypass intended access restrictions via vectors involving a blocked plug-in.

The management GUI on the IBM SAN Volume Controller and Storwize V7000 6.x before 6.4.1.3 allows remote attackers to bypass authentication and obtain superuser access via IP packets.

The Humax Wi-Fi Router model HG100R-* 2.0.6 is prone to an authentication bypass vulnerability via specially crafted requests to the management console. The bug is exploitable remotely when the router is configured to expose the management console. The router is not validating the session token while returning answers for some methods in url '/api'. An attacker can use this vulnerability to retrieve sensitive information such as private/public IP addresses, SSID names, and passwords.

OpenClinic GA versions 5.09.02 and 5.89.05b contain an authentication mechanism within the system that does not provide sufficient complexity to protect against brute force attacks, which may allow unauthorized users to access the system after no more than a fixed maximum number of attempts.

OpenClinic GA versions 5.09.02 and 5.89.05b may allow an attacker to bypass client-side access controls or use a crafted request to initiate a session with limited functionality, which may allow execution of admin functions such as SQL queries.

ConnectWise Automate through 2020.x has insufficient validation on certain authentication paths, allowing authentication bypass via a series of attempts. This was patched in 2020.7 and in a hotfix for 2019.12.

OpenMetadata is a unified platform for discovery, observability, and governance powered by a central metadata repository, in-depth lineage, and seamless team collaboration. The `JwtFilter` handles the API authentication by requiring and verifying JWT tokens. When a new request comes in, the request's path is checked against this list. When the request's path contains any of the excluded endpoints the filter returns without validating the JWT. Unfortunately, an attacker may use Path Parameters to make any path contain any arbitrary strings. For example, a request to `GET /api/v1;v1%2fusers%2flogin/events/subscriptions/validation/condition/111` will match the excluded endpoint condition and therefore will be processed with no JWT validation allowing an attacker to bypass the authentication mechanism and reach any arbitrary endpoint, including the ones listed above that lead to arbitrary SpEL expression injection. This bypass will not work when the endpoint uses the `SecurityContext.getUserPrincipal()` since it will return `null` and will throw an NPE. This issue may lead to authentication bypass and has been addressed in version 1.2.4. Users are advised to upgrade. There are no known workarounds for this vulnerability. This issue is also tracked as `GHSL-2023-237`.

A vulnerability was found in Klapp App and classified as problematic. This issue affects some unknown processing of the JSON Web Token Handler. The manipulation leads to weak authentication. The attack may be initiated remotely.

JabberD 2.x (aka jabberd2) before 2.6.1 allows anyone to authenticate using SASL ANONYMOUS, even when the sasl.anonymous c2s.xml option is not enabled.