The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

A vulnerability in Common Internet Filesystem (CIFS) code in the Clientless SSL VPN functionality of Cisco ASA Software, Major Releases 9.0-9.6, could allow an authenticated, remote attacker to cause a heap overflow. The vulnerability is due to insufficient validation of user supplied input. An attacker could exploit this vulnerability by sending a crafted URL to the affected system. An exploit could allow the remote attacker to cause a reload of the affected system or potentially execute code. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability affects systems configured in routed firewall mode only and in single or multiple context mode. This vulnerability can be triggered by IPv4 or IPv6 traffic. A valid TCP connection is needed to perform the attack. The attacker needs to have valid credentials to log in to the Clientless SSL VPN portal. Vulnerable Cisco ASA Software running on the following products may be affected by this vulnerability: Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco ASA for Firepower 9300 Series, Cisco ASA for Firepower 4100 Series. Cisco Bug IDs: CSCvc23838.

A vulnerability in the vContainer of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to cause a denial of service (DoS) condition and execute arbitrary code as the root user. The vulnerability is due to improper bounds checking by the vContainer. An attacker could exploit this vulnerability by sending a malicious file to an affected vContainer instance. A successful exploit could allow the attacker to cause a buffer overflow condition on the affected vContainer, which could result in a DoS condition that the attacker could use to execute arbitrary code as the root user.

A vulnerability in the web UI of the Cisco Firepower Management Center (FMC) could allow an authenticated, remote attacker to execute arbitrary commands on an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted input to the web UI. A successful exploit could allow the attacker to execute arbitrary commands within the affected device.

A vulnerability in the web UI of the Cisco Firepower Management Center (FMC) could allow an authenticated, remote attacker to execute arbitrary commands on an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted input to the web UI. A successful exploit could allow the attacker to execute arbitrary commands within the affected device.

Multiple vulnerabilities in the web-based management interface of the Cisco RV110W Wireless-N VPN Firewall, RV130 VPN Router, RV130W Wireless-N Multifunction VPN Router, and RV215W Wireless-N VPN Router could allow an authenticated, remote attacker to execute arbitrary code on an affected device. The vulnerabilities are due to improper validation of user-supplied data in the web-based management interface. An attacker could exploit these vulnerabilities by sending malicious HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code on the underlying operating system of the affected device as a high-privilege user.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV340 Series Routers could allow an authenticated, remote attacker with administrative credentials to execute arbitrary commands on the underlying operating system (OS) as a restricted user. For more information about these vulnerabilities, see the Details section of this advisory.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

A vulnerability in the Localdisk Management feature of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to make unauthorized changes to the file system of an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending a crafted HTTP request with absolute path sequences. A successful exploit could allow the attacker to upload malicious files to arbitrary locations within the file system. Using this method, it is possible to access the underlying operating system and execute commands with system privileges.

A vulnerability in the web-based GUI of Cisco Integrated Management Controller (IMC) 3.0(1c) could allow an authenticated, remote attacker to execute arbitrary commands on an affected system. The vulnerability exists because the affected software does not sufficiently sanitize user-supplied HTTP input. An attacker could exploit this vulnerability by sending an HTTP POST request that contains crafted, deserialized user data to the affected software. A successful exploit could allow the attacker to execute arbitrary commands with root-level privileges on the affected system, which the attacker could use to conduct further attacks. Cisco Bug IDs: CSCvd14591.

A vulnerability in Cisco Ultra Services Framework Staging Server could allow an authenticated, remote attacker with access to the management network to log in as an admin user of the affected device, aka an Insecure Default Credentials Vulnerability. More Information: CSCvc76681. Known Affected Releases: 21.0.0.

A vulnerability in Cisco Elastic Services Controllers could allow an authenticated, remote attacker to log in to an affected system as the Linux admin user, aka an Insecure Default Credentials Vulnerability. More Information: CSCvc76651. Known Affected Releases: 21.0.0.

A vulnerability in Cisco Ultra Services Framework Element Manager could allow an authenticated, remote attacker with access to the management network to log in as an admin or oper user of the affected device, aka an Insecure Default Credentials Vulnerability. More Information: CSCvc76699. Known Affected Releases: 21.0.0.

A vulnerability in Cisco Ultra Services Framework Element Manager could allow an authenticated, remote attacker to log in to the device with the privileges of the root user, aka an Insecure Default Account Information Vulnerability. More Information: CSCvd85710. Known Affected Releases: 21.0.v0.65839.

SQL injection vulnerability in the web framework in Cisco Identity Services Engine (ISE) 1.2 and earlier allows remote authenticated users to execute arbitrary SQL commands via unspecified vectors, aka Bug ID CSCug90502.

A vulnerability in the ConfD CLI of Cisco Elastic Services Controllers could allow an authenticated, remote attacker to log in to an affected system as the admin user, aka an Insecure Default Administrator Credentials Vulnerability. More Information: CSCvc76661. Known Affected Releases: 2.2(9.76).

A vulnerability in Cisco Ultra Services Framework Element Manager could allow an authenticated, remote attacker with access to the management network to log in to the affected device using default credentials present on the system, aka an Insecure Default Password Vulnerability. More Information: CSCvc76695. Known Affected Releases: 21.0.0.

A vulnerability in Cisco Unified Communications Manager 10.5(2.10000.5), 11.0(1.10000.10), and 11.5(1.10000.6) could allow an authenticated, remote attacker to conduct a blind SQL injection attack. The vulnerability is due to a failure to validate user-supplied input used in SQL queries that bypass protection filters. An attacker could exploit this vulnerability by sending crafted URLs that include SQL statements. An exploit could allow the attacker to modify or delete entries in some database tables, affecting the integrity of the data. Cisco Bug IDs: CSCve13786.

A vulnerability in the web framework of Cisco IOS XE Software could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation of HTTP parameters supplied by the user. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the affected web page parameter. The user must be authenticated to access the affected parameter. A successful exploit could allow the attacker to execute commands with root privileges. This vulnerability affects Cisco devices running Cisco IOS XE Software Release 16.2.1, if the HTTP Server feature is enabled for the device. The newly redesigned, web-based administration interface was introduced in the Denali 16.2 Release of Cisco IOS XE Software. The web-based administration interface in earlier releases of Cisco IOS XE Software is not affected by this vulnerability. Cisco Bug IDs: CSCuy83069.

A privilege escalation vulnerability in the Secure Shell (SSH) subsystem in the StarOS operating system for Cisco ASR 5000 Series, ASR 5500 Series, ASR 5700 Series devices, and Cisco Virtualized Packet Core could allow an authenticated, remote attacker to gain unrestricted, root shell access. The vulnerability is due to missing input validation of parameters passed during SSH or SFTP login. An attacker could exploit this vulnerability by providing crafted user input to the SSH or SFTP command-line interface (CLI) during SSH or SFTP login. An exploit could allow an authenticated attacker to gain root privileges access on the router. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability can be triggered via both IPv4 and IPv6 traffic. An established TCP connection toward port 22, the SSH default port, is needed to perform the attack. The attacker must have valid credentials to login to the system via SSH or SFTP. The following products have been confirmed to be vulnerable: Cisco ASR 5000/5500/5700 Series devices running StarOS after 17.7.0 and prior to 18.7.4, 19.5, and 20.2.3 with SSH configured are vulnerable. Cisco Virtualized Packet Core - Single Instance (VPC-SI) and Distributed Instance (VPC-DI) devices running StarOS prior to N4.2.7 (19.3.v7) and N4.7 (20.2.v0) with SSH configured are vulnerable. Cisco Bug IDs: CSCva65853.

A vulnerability in Cisco WebEx Meetings Server could allow an authenticated, remote attacker to execute predetermined shell commands on other hosts. More Information: CSCuz03353. Known Affected Releases: 2.6.

A vulnerability in Cisco WebEx Meetings Server could allow an authenticated, remote attacker to conduct arbitrary password changes against any non-administrative user. More Information: CSCuz03345. Known Affected Releases: 2.6. Known Fixed Releases: 2.7.1.12.

SQL injection vulnerability in Cisco Unified Communications Manager (CUCM) 7.1(x) through 9.1(2) allows remote authenticated users to execute arbitrary SQL commands via unspecified vectors, aka Bug ID CSCuh81766.

An unspecified function in Cisco Unified Communications Manager (CUCM) 7.1(x) through 9.1(2) allows remote authenticated users to execute arbitrary commands via unknown vectors, aka Bug ID CSCuh73440.

Multiple vulnerabilities in Cisco BroadWorks CommPilot Application Software could allow an authenticated, remote attacker to delete arbitrary user accounts or gain elevated privileges on an affected system.

A vulnerability in the key-based SSH authentication feature of Cisco StarOS Software could allow an authenticated, remote attacker to elevate privileges on an affected device. This vulnerability is due to insufficient validation of user-supplied credentials. An attacker could exploit this vulnerability by sending a valid low-privileged SSH key to an affected device from a host that has an IP address that is configured as the source for a high-privileged user account. A successful exploit could allow the attacker to log in to the affected device through SSH as a high-privileged user. There are workarounds that address this vulnerability.

A vulnerability in the web-based management interface of Cisco Intersight Virtual Appliance could allow an authenticated, remote attacker to perform a command injection attack on an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by using the web-based management interface to execute a command using crafted input. A successful exploit could allow the attacker to execute arbitrary commands using root-level privileges on an affected device.

SQL injection vulnerability in the web component in Cisco Unified MeetingPlace 7.1 allows remote authenticated users to execute arbitrary SQL commands via unspecified vectors, aka Bug ID CSCtx08939.

Directory traversal vulnerability in Cisco Unified Communications Manager (aka CUCM, formerly CallManager) 6.x before 6.1(5)su3, 7.x before 7.1(5b)su3, 8.0 before 8.0(3a)su1, and 8.5 before 8.5(1) allows remote authenticated users to upload files to arbitrary directories via a modified pathname in an upload request, aka Bug ID CSCti81603.

Cisco Show and Share 5(2), 5.2(1), and 5.2(2) before 5.2(2.1) allows remote authenticated users to upload and execute arbitrary code by leveraging video upload privileges, aka Bug ID CSCto69857.

SQL injection vulnerability in the Management Center for Cisco Security Agents 5.1 before 5.1.0.117, 5.2 before 5.2.0.296, and 6.0 before 6.0.1.132 allows remote authenticated users to execute arbitrary SQL commands via unspecified vectors.

A vulnerability in the Smart Licensing Manager service of the Cisco Firepower 4100 Series Next-Generation Firewall (NGFW) and Firepower 9300 Security Appliance could allow an authenticated, remote attacker to inject arbitrary commands that could be executed with root privileges. The vulnerability is due to insufficient input validation of certain Smart Licensing configuration parameters. An authenticated attacker could exploit the vulnerability by configuring a malicious URL within the affected feature. A successful exploit could allow the attacker to execute arbitrary commands with root privileges. This vulnerability affects the following Cisco Firepower Security products running FX-OS code trains 1.1.3, 1.1.4, and 2.0.1 (versions 2.1.1, 2.2.1, and 2.2.2 are not affected): Firepower 4100 Series Next-Generation Firewall and Firepower 9300 Security Appliance. Cisco Bug IDs: CSCvb86863.

A vulnerability in the web-based user interface (web UI) of Cisco IOS XE 16.2 could allow an authenticated, remote attacker to elevate their privileges on an affected device. The vulnerability is due to incorrect default permission settings for new users who are created by using the web UI of the affected software. An attacker could exploit this vulnerability by using the web UI of the affected software to create a new user and then logging into the web UI as the newly created user. A successful exploit could allow the attacker to elevate their privileges on the affected device. This vulnerability affects Cisco devices that are running a vulnerable release Cisco IOS XE Software, if the HTTP Server feature is enabled for the device. The newly redesigned, web-based administration UI was introduced in the Denali 16.2 Release of Cisco IOS XE Software. This vulnerability does not affect the web-based administration UI in earlier releases of Cisco IOS XE Software. Cisco Bug IDs: CSCuy83062.

The default configuration of Cisco ASA 5500 Series Adaptive Security Appliance (Cisco ASA) 7.0, 7.1, 7.2, 8.0, 8.1, and 8.2 allows portal traffic to access arbitrary backend servers, which might allow remote authenticated users to bypass intended access restrictions and access unauthorized web sites via a crafted URL obfuscated with ROT13 and a certain encoding. NOTE: this issue was originally reported as a vulnerability related to lack of restrictions to URLs listed in the Cisco WebVPN bookmark component, but the vendor states that "The bookmark feature is not a security feature."

SQL injection vulnerability in the Solution Engine in Cisco Secure Access Control Server (ACS) 5.7(0.15) allows remote authenticated users to execute arbitrary SQL commands via a crafted URL, aka Bug ID CSCuw24700.

A vulnerability in the web console of the Cisco Cloud Services Platform (CSP) 2100 could allow an authenticated, remote attacker to interact maliciously with the services or virtual machines (VMs) operating remotely on an affected CSP device. The vulnerability is due to weaknesses in the generation of certain authentication mechanisms in the URL of the web console. An attacker could exploit this vulnerability by browsing to one of the hosted VMs' URLs in Cisco CSP and viewing specific patterns that control the web application's mechanisms for authentication control. An exploit could allow the attacker to access a specific VM on the CSP, which causes a complete loss of the system's confidentiality, integrity, and availability. This vulnerability affects Cisco Cloud Services Platform (CSP) 2100 running software release 2.1.0, 2.1.1, 2.1.2, 2.2.0, 2.2.1, or 2.2.2. Cisco Bug IDs: CSCve64690.

A vulnerability in the JSON-RPC API feature in Cisco Crosswork Network Services Orchestrator (NSO) and ConfD that is used by the web-based management interfaces of Cisco Optical Site Manager and Cisco RV340 Dual WAN Gigabit VPN Routers could allow an authenticated, remote attacker to modify the configuration of an affected application or device.  This vulnerability is due to improper authorization checks on the API. An attacker with privileges sufficient to access the affected application or device could exploit this vulnerability by sending malicious requests to the JSON-RPC API. A successful exploit could allow the attacker to make unauthorized modifications to the configuration of the affected application or device, including creating new user accounts or elevating their own privileges on an affected system.

A vulnerability in Cisco Nexus Dashboard Fabric Controller (NDFC) could allow an authenticated, remote attacker with low privileges to execute arbitrary code on an affected device. This vulnerability is due to improper path validation. An attacker could exploit this vulnerability by using the Secure Copy Protocol (SCP) to upload malicious code to an affected device using path traversal techniques. A successful exploit could allow the attacker to execute arbitrary code in a specific container with the privileges of root.

A vulnerability in the web-based management interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to conduct SQL injection attacks on an affected system. This vulnerability exists because the web-based management interface does not adequately validate user input. An attacker could exploit this vulnerability by authenticating to the application and sending crafted SQL queries to an affected system. A successful exploit could allow the attacker to obtain any data from the database, execute arbitrary commands on the underlying operating system, and elevate privileges to root. To exploit this vulnerability, an attacker would need at least Read Only user credentials.

Multiple vulnerabilities in Cisco Data Center Network Manager (DCNM) Software could allow a remote attacker to inject arbitrary values into DCNM configuration parameters, redirect a user to a malicious website, inject malicious content into a DCNM client interface, or conduct a cross-site scripting (XSS) attack against a user of the affected software. Cisco Bug IDs: CSCvf40477, CSCvf63150, CSCvf68218, CSCvf68235, CSCvf68247.

A vulnerability in the web-based management interface of Cisco Prime Infrastructure and Evolved Programmable Network (EPN) Manager could allow an authenticated, remote attacker to execute arbitrary commands on an affected system. The vulnerability is due to insufficient validation of user-supplied input to the web-based management interface. An attacker could exploit this vulnerability by sending crafted HTTP requests to the interface. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system (OS) with the permissions of a special non-root user. In this way, an attacker could take control of the affected system, which would allow them to obtain and alter sensitive data. The attacker could also affect the devices that are managed by the affected system by pushing arbitrary configuration files, retrieving device credentials and confidential information, and ultimately undermining the stability of the devices, causing a denial of service (DoS) condition.

A vulnerability in the Operations, Administration, Maintenance, and Provisioning (OAMP) credential reset functionality for Cisco Unified Customer Voice Portal (CVP) could allow an authenticated, remote attacker to gain elevated privileges. The vulnerability is due to a lack of proper input validation. An attacker could exploit this vulnerability by authenticating to the OAMP and sending a crafted HTTP request. A successful exploit could allow the attacker to gain administrator privileges. The attacker must successfully authenticate to the system to exploit this vulnerability. This vulnerability affects Cisco Unified Customer Voice Portal (CVP) running software release 10.5, 11.0, or 11.5. Cisco Bug IDs: CSCve92752.

Unspecified vulnerability in Cisco CallManager 3.2 and earlier, 3.3 before 3.3(5)SR1, 4.0 before 4.0(2a)SR2c, and 4.1 before 4.1(3)SR2 allows remote authenticated users with read-only administrative privileges to obtain full administrative privileges via a "crafted URL on the CCMAdmin web page."