A vulnerability in the Cisco Encrypted Traffic Analytics (ETA) feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to a logic error that exists when handling a malformed incoming packet, leading to access to an internal data structure after it has been freed. An attacker could exploit this vulnerability by sending crafted, malformed IP packets to an affected device. A successful exploit could allow the attacker to cause an affected device to reload, resulting in a DoS condition.
A vulnerability in the Network-Based Application Recognition (NBAR) feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. This vulnerability is due to a parsing issue on DNS packets. An attacker could exploit this vulnerability by sending crafted DNS packets through routers that are running an affected version and have NBAR enabled. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition.
The SNMP Trap Agent service in Cisco Unified Communications Manager (CUCM) 4.1 before 4.1(3)SR6, 4.2 before 4.2(3)SR3, 4.3 before 4.3(2), 5.x before 5.1(3), and 6.x before 6.1(1) allows remote attackers to cause a denial of service (core dump and service restart) via a series of malformed UDP packets, as demonstrated by the IP Stack Integrity Checker (ISIC), aka Bug ID CSCsj24113.
A vulnerability in the Border Gateway Protocol (BGP) Multicast VPN (MVPN) implementation of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause an affected device to unexpectedly reload, resulting in a denial of service (DoS) condition. The vulnerability is due to incomplete input validation of a specific type of BGP MVPN update message. An attacker could exploit this vulnerability by sending this specific, valid BGP MVPN update message to a targeted device. A successful exploit could allow the attacker to cause one of the BGP-related routing applications to restart multiple times, leading to a system-level restart. Note: The Cisco implementation of BGP accepts incoming BGP traffic from only explicitly configured peers. To exploit this vulnerability, an attacker must send a specific BGP MVPN update message over an established TCP connection that appears to come from a trusted BGP peer. To do so, the attacker must obtain information about the BGP peers in the trusted network of the affected system.
Memory leak in the Certificate Trust List (CTL) Provider service in Cisco Unified Communications Manager (CUCM) 5.x before 5.1(3) and 6.x before 6.1(1) allows remote attackers to cause a denial of service (memory consumption and service interruption) via a series of malformed TCP packets, aka Bug ID CSCsi98433.
Unspecified vulnerability in Cisco Unified Communications Manager 4.1 before 4.1(3)SR6, 4.2 before 4.2(3)SR3, 4.3 before 4.3(2), 5.x before 5.1(3), and 6.x before 6.1(1) allows remote attackers to cause a denial of service (CCM service restart) via an unspecified SIP INVITE message, aka Bug ID CSCsk46944.
Unspecified vulnerability in the SSH server in (1) Cisco Service Control Engine (SCE) before 3.1.6, and (2) Icon Labs Iconfidant SSH before 2.3.8, allows remote attackers to cause a denial of service (device instability) via "SSH credentials that attempt to change the authentication method," aka Bug ID CSCsm14239.
The HTTP server in Cisco Unified IP Phone 7935 and 7936 running SCCP firmware allows remote attackers to cause a denial of service (reboot) via a crafted HTTP request.
The SSH server in (1) Cisco Service Control Engine (SCE) before 3.1.6, and (2) Icon Labs Iconfidant SSH before 2.3.8, allows remote attackers to cause a denial of service (device restart or daemon outage) via a high rate of login attempts, aka Bug ID CSCsi68582.
Unspecified vulnerability in the SSH server in (1) Cisco Service Control Engine (SCE) 3.0.x before 3.0.7 and 3.1.x before 3.1.0, and (2) Icon Labs Iconfidant SSH before 2.3.8, allows remote attackers to cause a denial of service (management interface outage) via SSH traffic that occurs during management operations and triggers "illegal I/O operations," aka Bug ID CSCsh49563.
Multiple vulnerabilities in the implementation of the Common Industrial Protocol (CIP) feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerabilities are due to insufficient input processing of CIP traffic. An attacker could exploit these vulnerabilities by sending crafted CIP traffic to be processed by an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition.
Cisco Unified IP Phone 7940, 7940G, 7960, and 7960G running SCCP firmware allows remote attackers to cause a denial of service (reboot) via a long ICMP echo request (ping) packet.
Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services Module (ASASM) in Cisco Catalyst 6500 series devices, with software 8.4 before 8.4(2.11) and 8.5 before 8.5(1.4) allow remote attackers to cause a denial of service (device reload) via (1) IPv4 or (2) IPv6 packets that trigger syslog message 305006, aka Bug ID CSCts39634.
Cisco Wireless LAN Controller (WLC) devices with software 4.x, 5.x, 6.0, and 7.0 before 7.0.220.0 and 7.1 before 7.1.91.0, when WebAuth is enabled, allow remote attackers to cause a denial of service (device reload) via a sequence of (1) HTTP or (2) HTTPS packets, aka Bug ID CSCtt47435.
Unspecified vulnerability in Cisco Firewall Services Module (FWSM) 3.2(3) allows remote attackers to cause a denial of service (device reload) via crafted "data in the control-plane path with Layer 7 Application Inspections."
Cisco Unified Communications Manager (CUCM, formerly CallManager) 5.1 before 5.1(2), and Unified CallManager 5.0, allow remote attackers to cause a denial of service (kernel panic) via a flood of SIP INVITE messages to UDP port 5060, which triggers resource exhaustion, aka CSCsi75822.
Cisco Content Switching Modules (CSM) 4.2 before 4.2.7, and Cisco Content Switching Module with SSL (CSM-S) 2.1 before 2.1.6, when service termination is enabled, allow remote attackers to cause a denial of service (reboot) via unspecified vectors related to high network utilization, aka CSCsh57876.
A vulnerability in the email message filtering feature of Cisco AsyncOS Software for Cisco Email Security Appliances could allow an unauthenticated, remote attacker to cause an affected device to stop scanning and forwarding email messages due to a denial of service (DoS) condition. Affected Products: This vulnerability affects all releases prior to the first fixed release of Cisco AsyncOS Software for Cisco Email Security Appliances, both virtual and hardware appliances, if the software is configured to apply a message filter or content filter to incoming email attachments. The vulnerability is not limited to any specific rules or actions for a message filter or content filter. More Information: CSCuz63143. Known Affected Releases: 8.5.7-042 9.7.0-125. Known Fixed Releases: 10.0.0-125 9.1.1-038 9.7.2-047.
A vulnerability in the data acquisition (DAQ) component of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass configured access control policies or cause a denial of service (DoS) condition. The vulnerability exists because the affected software improperly manages system memory resources when inspecting traffic. An attacker could exploit this vulnerability by generating specific traffic patterns for the software to inspect. A successful exploit could allow the attacker to exhaust system memory resources used for traffic inspection. Depending on the configuration, the FTD Software could fail open and cease to inspect traffic or fail closed and result in a DoS condition. This vulnerability may require manual intervention to restore the software.
Cisco Content Switching Modules (CSM) 4.2 before 4.2.3a, and Cisco Content Switching Module with SSL (CSM-S) 2.1 before 2.1.2a, allow remote attackers to cause a denial of service (CPU consumption or reboot) via sets of out-of-order TCP packets with unspecified characteristics, aka CSCsd27478.
Cisco Adaptive Security Appliances (ASA) 5500 series devices with software 8.0 through 8.4 allow remote attackers to cause a denial of service (connection limit exceeded) by triggering a large number of stale connections that result in an incorrect value for an MPF connection count, aka Bug ID CSCtv19854.
Memory leak in the NAT feature in Cisco IOS 12.4, 15.0, and 15.1 allows remote attackers to cause a denial of service (memory consumption, and device hang or reload) via SIP packets that require translation, related to a "memory starvation vulnerability," aka Bug ID CSCti35326.
The IKEv1 implementation in Cisco IOS 12.2 through 12.4 and 15.0 through 15.2 and IOS XE 2.1.x through 2.6.x and 3.1.xS through 3.4.xS before 3.4.2S, 3.5.xS before 3.5.1S, and 3.2.xSG before 3.2.2SG allows remote attackers to cause a denial of service (device reload) by sending IKE UDP packets over (1) IPv4 or (2) IPv6, aka Bug ID CSCts38429.
The Common Internet File System (CIFS) optimization in Cisco Wide Area Application Services (WAAS) 4.0.7 and 4.0.9, as used by Cisco WAE appliance and the NM-WAE-502 network module, when Edge Services are configured, allows remote attackers to cause a denial of service (loss of service) via a flood of TCP SYN packets to port (1) 139 or (2) 445.
Unspecified vulnerability in Cisco Unified Communications Manager (CUCM, formerly CallManager) and Unified Presence Server (CUPS) allows remote attackers to cause a denial of service (loss of cluster services) via unspecified vectors, aka (1) CSCsj09859 and (2) CSCsj19985.
A vulnerability with IPv6 UDP ingress packet processing in Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, remote attacker to cause an unexpected reload of the device. The vulnerability is due to incomplete IPv6 UDP header validation. An attacker could exploit this vulnerability by sending a crafted IPv6 UDP packet to a specific port on the targeted device. An exploit could allow the attacker to impact the availability of the device as it could unexpectedly reload. This vulnerability affects Cisco Wireless LAN Controller (WLC) running software version 8.2.121.0 or 8.3.102.0. Cisco Bug IDs: CSCva98592.
The DHCP relay agent in Cisco Adaptive Security Appliance (ASA) and PIX 7.2 allows remote attackers to cause a denial of service (dropped packets) via a DHCPREQUEST or DHCPINFORM message that causes multiple DHCPACK messages to be sent from DHCP servers to the agent, which consumes the memory allocated for a local buffer. NOTE: this issue only occurs when multiple DHCP servers are used.
The Cisco Intrusion Prevention System (IPS) and IOS with Firewall/IPS Feature Set do not properly handle certain full-width and half-width Unicode character encodings, which might allow remote attackers to evade detection of HTTP traffic.
Unspecified vulnerability in Cisco Adaptive Security Appliance (ASA) and PIX 7.1 before 7.1(2)49 and 7.2 before 7.2(2)17 allows remote attackers to cause a denial of service (device reload) via unknown vectors related to VPN connection termination and password expiry.
Cisco Unified CallManager (CUCM) 5.0 before 5.0(4a)SU1 and Cisco Unified Presence Server (CUPS) 1.0 before 1.0(3) allow remote attackers to cause a denial of service (loss of voice services) via a flood of ICMP echo requests, aka bug ID CSCsf12698.
Unspecified vulnerability in the IPSec Manager Service for Cisco Unified CallManager (CUCM) 5.0 before 5.0(4a)SU1 and Cisco Unified Presence Server (CUPS) 1.0 before 1.0(3) allows remote attackers to cause a denial of service (loss of cluster services) via a "specific UDP packet" to UDP port 8500, aka bug ID CSCsg60949.
Cisco IOS after 12.3(14)T, 12.3(8)YC1, 12.3(8)YG, and 12.4, with voice support and without Session Initiated Protocol (SIP) configured, allows remote attackers to cause a denial of service (crash) by sending a crafted packet to port 5060/UDP.
Memory leak in the TCP listener in Cisco IOS 9.x, 10.x, 11.x, and 12.x allows remote attackers to cause a denial of service by sending crafted TCP traffic to an IPv4 address on the IOS device.
Cisco FWSM 3.x before 3.1(3.2), when authentication is configured to use "aaa authentication match" or "aaa authentication include", allows remote attackers to cause a denial of service (device reboot) via a long HTTP request.
Cisco PIX 500 and ASA 5500 Series Security Appliances 6.x before 6.3(5.115), 7.0 before 7.0(5.2), and 7.1 before 7.1(2.5), and the FWSM 3.x before 3.1(3.24), when the "inspect sip" option is enabled, allows remote attackers to cause a denial of service (device reboot) via malformed SIP packets.
Unspecified vulnerability in Cisco Firewall Services Module (FWSM) 3.x before 3.1(3.3), when set to log at the "debug" level, allows remote attackers to cause a denial of service (device reboot) by sending packets that are not of a particular protocol such as TCP or UDP, which triggers the reboot during generation of Syslog message 710006.
Cisco PIX 500 and ASA 5500 Series Security Appliances 7.2.2, when configured to inspect certain TCP-based protocols, allows remote attackers to cause a denial of service (device reboot) via malformed TCP packets.
Cisco IOS allows remote attackers to cause a denial of service (crash) via a crafted IPv6 Type 0 Routing header.
Cisco IOS 12.2 through 12.4 and 15.0 through 15.6 and IOS XE 3.1 through 3.17 and 16.2 allow remote attackers to cause a denial of service (device reload) via crafted fields in an H.323 message, aka Bug ID CSCux04257.
Cisco Firewall Services Module (FWSM) 3.x before 3.1(3.1) allows remote attackers to cause a denial of service (device reboot) via malformed SNMP requests.
Memory leak in Cisco IOS XR 5.1.x through 5.1.3, 5.2.x through 5.2.5, and 5.3.x through 5.3.2 on ASR 9001 devices allows remote attackers to cause a denial of service (control-plane protocol outage) via crafted fragmented packets, aka Bug ID CSCux26791.
A vulnerability in the email attachment scanning functionality of the Advanced Malware Protection (AMP) feature of Cisco AsyncOS Software for Cisco Email Security Appliances could allow an unauthenticated, remote attacker to cause an affected device to stop scanning and forwarding email messages due to a denial of service (DoS) condition. Affected Products: This vulnerability affects Cisco AsyncOS Software releases 9.7.1 and later, prior to the first fixed release, for both virtual and hardware Cisco Email Security Appliances, if the AMP feature is configured to scan incoming email attachments. More Information: CSCuy99453. Known Affected Releases: 9.7.1-066. Known Fixed Releases: 10.0.0-125 9.7.1-207 9.7.2-047.
Memory leak in the Smart Install client implementation in Cisco IOS 12.2 and 15.0 through 15.2 and IOS XE 3.2 through 3.8 allows remote attackers to cause a denial of service (memory consumption) via crafted image-list parameters, aka Bug ID CSCuy82367.
Cisco ACE30 Application Control Engine Module through A5 3.3 and ACE 4700 Application Control Engine appliances through A5 3.3 allow remote attackers to cause a denial of service (device reload) via crafted (1) SSL or (2) TLS packets, aka Bug ID CSCvb16317.
Cisco IOS 15.2 through 15.6 and IOS XE 3.6 through 3.17 and 16.1 allow remote attackers to cause a denial of service (device restart) via a malformed IPv6 Protocol Independent Multicast (PIM) register packet, aka Bug ID CSCuy16399.
Cisco Security Agent (CSA) for Linux 4.5 before 4.5.1.657 and 5.0 before 5.0.0.193, as used by Unified CallManager (CUCM) and Unified Presence Server (CUPS), allows remote attackers to cause a denial of service (resource consumption) via a port scan with certain options.
A vulnerability in confederation implementation for the Border Gateway Protocol (BGP) in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. This vulnerability is due to a memory corruption that occurs when a BGP update is created with an AS_CONFED_SEQUENCE attribute that has 255 autonomous system numbers (AS numbers). An attacker could exploit this vulnerability by sending a crafted BGP update message, or the network could be designed in such a manner that the AS_CONFED_SEQUENCE attribute grows to 255 AS numbers or more. A successful exploit could allow the attacker to cause memory corruption, which may cause the BGP process to restart, resulting in a DoS condition. To exploit this vulnerability, an attacker must control a BGP confederation speaker within the same autonomous system as the victim, or the network must be designed in such a manner that the AS_CONFED_SEQUENCE attribute grows to 255 AS numbers or more.
A vulnerability in the RADIUS setting Reject RADIUS requests from clients with repeated failures on Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to cause Cisco ISE to restart unexpectedly. This vulnerability is due to a logic error when processing a RADIUS access request for a MAC address that is already a rejected endpoint. An attacker could exploit this vulnerability by sending a specific sequence of multiple crafted RADIUS access request messages to Cisco ISE. A successful exploit could allow the attacker to cause a denial of service (DoS) condition when Cisco ISE restarts.
A vulnerability in the RADIUS message processing feature of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to cause the affected system to stop processing RADIUS packets. This vulnerability is due to improper handling of certain RADIUS accounting requests. An attacker could exploit this vulnerability by sending a crafted authentication request to a network access device (NAD) that uses Cisco ISE for authentication, authorization, and accounting (AAA). This would eventually result in the NAD sending a RADIUS accounting request packet to Cisco ISE. An attacker could also exploit this vulnerability by sending a crafted RADIUS accounting request packet to Cisco ISE directly if the RADIUS shared secret is known. A successful exploit could allow the attacker to cause the RADIUS process to unexpectedly restart, resulting in authentication or authorization timeouts and denying legitimate users access to the network or service. Clients already authenticated to the network would not be affected. Note: To recover the ability to process RADIUS packets, a manual restart of the affected Policy Service Node (PSN) may be required. For more information, see the Details ["#details"] section of this advisory.
A vulnerability in the RADIUS message processing feature of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper handling of certain RADIUS requests. An attacker could exploit this vulnerability by sending a specific authentication request to a network access device (NAD) that uses Cisco ISE for authentication, authorization, and accounting (AAA). A successful exploit could allow the attacker to cause Cisco ISE to reload.