In the Linux kernel, the following vulnerability has been resolved: cxl/port: Fix delete_endpoint() vs parent unregistration race The CXL subsystem, at cxl_mem ->probe() time, establishes a lineage of ports (struct cxl_port objects) between an endpoint and the root of a CXL topology. Each port including the endpoint port is attached to the cxl_port driver. Given that setup, it follows that when either any port in that lineage goes through a cxl_port ->remove() event, or the memdev goes through a cxl_mem ->remove() event. The hierarchy below the removed port, or the entire hierarchy if the memdev is removed needs to come down. The delete_endpoint() callback is careful to check whether it is being called to tear down the hierarchy, or if it is only being called to teardown the memdev because an ancestor port is going through ->remove(). That care needs to take the device_lock() of the endpoint's parent. Which requires 2 bugs to be fixed: 1/ A reference on the parent is needed to prevent use-after-free scenarios like this signature: BUG: spinlock bad magic on CPU#0, kworker/u56:0/11 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20230524-3.fc38 05/24/2023 Workqueue: cxl_port detach_memdev [cxl_core] RIP: 0010:spin_bug+0x65/0xa0 Call Trace: do_raw_spin_lock+0x69/0xa0 __mutex_lock+0x695/0xb80 delete_endpoint+0xad/0x150 [cxl_core] devres_release_all+0xb8/0x110 device_unbind_cleanup+0xe/0x70 device_release_driver_internal+0x1d2/0x210 detach_memdev+0x15/0x20 [cxl_core] process_one_work+0x1e3/0x4c0 worker_thread+0x1dd/0x3d0 2/ In the case of RCH topologies, the parent device that needs to be locked is not always @port->dev as returned by cxl_mem_find_port(), use endpoint->dev.parent instead.

In the Linux kernel, the following vulnerability has been resolved: mm/MADV_COLLAPSE: catch !none !huge !bad pmd lookups In commit 34488399fa08 ("mm/madvise: add file and shmem support to MADV_COLLAPSE") we make the following change to find_pmd_or_thp_or_none(): - if (!pmd_present(pmde)) - return SCAN_PMD_NULL; + if (pmd_none(pmde)) + return SCAN_PMD_NONE; This was for-use by MADV_COLLAPSE file/shmem codepaths, where MADV_COLLAPSE might identify a pte-mapped hugepage, only to have khugepaged race-in, free the pte table, and clear the pmd. Such codepaths include: A) If we find a suitably-aligned compound page of order HPAGE_PMD_ORDER already in the pagecache. B) In retract_page_tables(), if we fail to grab mmap_lock for the target mm/address. In these cases, collapse_pte_mapped_thp() really does expect a none (not just !present) pmd, and we want to suitably identify that case separate from the case where no pmd is found, or it's a bad-pmd (of course, many things could happen once we drop mmap_lock, and the pmd could plausibly undergo multiple transitions due to intervening fault, split, etc). Regardless, the code is prepared install a huge-pmd only when the existing pmd entry is either a genuine pte-table-mapping-pmd, or the none-pmd. However, the commit introduces a logical hole; namely, that we've allowed !none- && !huge- && !bad-pmds to be classified as genuine pte-table-mapping-pmds. One such example that could leak through are swap entries. The pmd values aren't checked again before use in pte_offset_map_lock(), which is expecting nothing less than a genuine pte-table-mapping-pmd. We want to put back the !pmd_present() check (below the pmd_none() check), but need to be careful to deal with subtleties in pmd transitions and treatments by various arch. The issue is that __split_huge_pmd_locked() temporarily clears the present bit (or otherwise marks the entry as invalid), but pmd_present() and pmd_trans_huge() still need to return true while the pmd is in this transitory state. For example, x86's pmd_present() also checks the _PAGE_PSE , riscv's version also checks the _PAGE_LEAF bit, and arm64 also checks a PMD_PRESENT_INVALID bit. Covering all 4 cases for x86 (all checks done on the same pmd value): 1) pmd_present() && pmd_trans_huge() All we actually know here is that the PSE bit is set. Either: a) We aren't racing with __split_huge_page(), and PRESENT or PROTNONE is set. => huge-pmd b) We are currently racing with __split_huge_page(). The danger here is that we proceed as-if we have a huge-pmd, but really we are looking at a pte-mapping-pmd. So, what is the risk of this danger? The only relevant path is: madvise_collapse() -> collapse_pte_mapped_thp() Where we might just incorrectly report back "success", when really the memory isn't pmd-backed. This is fine, since split could happen immediately after (actually) successful madvise_collapse(). So, it should be safe to just assume huge-pmd here. 2) pmd_present() && !pmd_trans_huge() Either: a) PSE not set and either PRESENT or PROTNONE is. => pte-table-mapping pmd (or PROT_NONE) b) devmap. This routine can be called immediately after unlocking/locking mmap_lock -- or called with no locks held (see khugepaged_scan_mm_slot()), so previous VMA checks have since been invalidated. 3) !pmd_present() && pmd_trans_huge() Not possible. 4) !pmd_present() && !pmd_trans_huge() Neither PRESENT nor PROTNONE set => not present I've checked all archs that implement pmd_trans_huge() (arm64, riscv, powerpc, longarch, x86, mips, s390) and this logic roughly translates (though devmap treatment is unique to x86 and powerpc, and (3) doesn't necessarily hold in general -- but that doesn't matter since !pmd_present() always takes failure path). Also, add a comment above find_pmd_or_thp_or_none() ---truncated---

In the Linux kernel, the following vulnerability has been resolved: af_unix: Fix data-races around user->unix_inflight. user->unix_inflight is changed under spin_lock(unix_gc_lock), but too_many_unix_fds() reads it locklessly. Let's annotate the write/read accesses to user->unix_inflight. BUG: KCSAN: data-race in unix_attach_fds / unix_inflight write to 0xffffffff8546f2d0 of 8 bytes by task 44798 on cpu 1: unix_inflight+0x157/0x180 net/unix/scm.c:66 unix_attach_fds+0x147/0x1e0 net/unix/scm.c:123 unix_scm_to_skb net/unix/af_unix.c:1827 [inline] unix_dgram_sendmsg+0x46a/0x14f0 net/unix/af_unix.c:1950 unix_seqpacket_sendmsg net/unix/af_unix.c:2308 [inline] unix_seqpacket_sendmsg+0xba/0x130 net/unix/af_unix.c:2292 sock_sendmsg_nosec net/socket.c:725 [inline] sock_sendmsg+0x148/0x160 net/socket.c:748 ____sys_sendmsg+0x4e4/0x610 net/socket.c:2494 ___sys_sendmsg+0xc6/0x140 net/socket.c:2548 __sys_sendmsg+0x94/0x140 net/socket.c:2577 __do_sys_sendmsg net/socket.c:2586 [inline] __se_sys_sendmsg net/socket.c:2584 [inline] __x64_sys_sendmsg+0x45/0x50 net/socket.c:2584 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 read to 0xffffffff8546f2d0 of 8 bytes by task 44814 on cpu 0: too_many_unix_fds net/unix/scm.c:101 [inline] unix_attach_fds+0x54/0x1e0 net/unix/scm.c:110 unix_scm_to_skb net/unix/af_unix.c:1827 [inline] unix_dgram_sendmsg+0x46a/0x14f0 net/unix/af_unix.c:1950 unix_seqpacket_sendmsg net/unix/af_unix.c:2308 [inline] unix_seqpacket_sendmsg+0xba/0x130 net/unix/af_unix.c:2292 sock_sendmsg_nosec net/socket.c:725 [inline] sock_sendmsg+0x148/0x160 net/socket.c:748 ____sys_sendmsg+0x4e4/0x610 net/socket.c:2494 ___sys_sendmsg+0xc6/0x140 net/socket.c:2548 __sys_sendmsg+0x94/0x140 net/socket.c:2577 __do_sys_sendmsg net/socket.c:2586 [inline] __se_sys_sendmsg net/socket.c:2584 [inline] __x64_sys_sendmsg+0x45/0x50 net/socket.c:2584 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 value changed: 0x000000000000000c -> 0x000000000000000d Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 44814 Comm: systemd-coredum Not tainted 6.4.0-11989-g6843306689af #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014

In the Linux kernel, the following vulnerability has been resolved: media: rkisp1: Fix IRQ disable race issue In rkisp1_isp_stop() and rkisp1_csi_disable() the driver masks the interrupts and then apparently assumes that the interrupt handler won't be running, and proceeds in the stop procedure. This is not the case, as the interrupt handler can already be running, which would lead to the ISP being disabled while the interrupt handler handling a captured frame. This brings up two issues: 1) the ISP could be powered off while the interrupt handler is still running and accessing registers, leading to board lockup, and 2) the interrupt handler code and the code that disables the streaming might do things that conflict. It is not clear to me if 2) causes a real issue, but 1) can be seen with a suitable delay (or printk in my case) in the interrupt handler, leading to board lockup.

NVIDIA Tegra kernel driver contains a vulnerability in NVHost, where a specific race condition can lead to a null pointer dereference, which may lead to a system reboot.

Race condition within a thread in firmware for some Intel(R) Optane(TM) SSD and Intel(R) SSD DC Products may allow a privileged user to potentially enable denial of service via local access.

Race condition in firmware for some Intel(R) Optane(TM) SSD, Intel(R) Optane(TM) SSD DC and Intel(R) SSD DC Products may allow a privileged user to potentially enable denial of service via local access.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: Fix race condition in RPC handle list access The 'sess->rpc_handle_list' XArray manages RPC handles within a ksmbd session. Access to this list is intended to be protected by 'sess->rpc_lock' (an rw_semaphore). However, the locking implementation was flawed, leading to potential race conditions. In ksmbd_session_rpc_open(), the code incorrectly acquired only a read lock before calling xa_store() and xa_erase(). Since these operations modify the XArray structure, a write lock is required to ensure exclusive access and prevent data corruption from concurrent modifications. Furthermore, ksmbd_session_rpc_method() accessed the list using xa_load() without holding any lock at all. This could lead to reading inconsistent data or a potential use-after-free if an entry is concurrently removed and the pointer is dereferenced. Fix these issues by: 1. Using down_write() and up_write() in ksmbd_session_rpc_open() to ensure exclusive access during XArray modification, and ensuring the lock is correctly released on error paths. 2. Adding down_read() and up_read() in ksmbd_session_rpc_method() to safely protect the lookup.

An issue was discovered in the Linux kernel before 5.11.7. usbip_sockfd_store in drivers/usb/usbip/stub_dev.c allows attackers to cause a denial of service (GPF) because the stub-up sequence has race conditions during an update of the local and shared status, aka CID-9380afd6df70.

A race condition was discovered in get_old_root in fs/btrfs/ctree.c in the Linux kernel through 5.11.8. It allows attackers to cause a denial of service (BUG) because of a lack of locking on an extent buffer before a cloning operation, aka CID-dbcc7d57bffc.

A flaw was found in the subsequent get_user_pages_fast in the Linux kernel’s interface for symmetric key cipher algorithms in the skcipher_recvmsg of crypto/algif_skcipher.c function. This flaw allows a local user to crash the system.

In the Linux kernel, the following vulnerability has been resolved: pinmux: fix race causing mux_owner NULL with active mux_usecount commit 5a3e85c3c397 ("pinmux: Use sequential access to access desc->pinmux data") tried to address the issue when two client of the same gpio calls pinctrl_select_state() for the same functionality, was resulting in NULL pointer issue while accessing desc->mux_owner. However, issue was not completely fixed due to the way it was handled and it can still result in the same NULL pointer. The issue occurs due to the following interleaving: cpu0 (process A) cpu1 (process B) pin_request() { pin_free() { mutex_lock() desc->mux_usecount--; //becomes 0 .. mutex_unlock() mutex_lock(desc->mux) desc->mux_usecount++; // becomes 1 desc->mux_owner = owner; mutex_unlock(desc->mux) mutex_lock(desc->mux) desc->mux_owner = NULL; mutex_unlock(desc->mux) This sequence leads to a state where the pin appears to be in use (`mux_usecount == 1`) but has no owner (`mux_owner == NULL`), which can cause NULL pointer on next pin_request on the same pin. Ensure that updates to mux_usecount and mux_owner are performed atomically under the same lock. Only clear mux_owner when mux_usecount reaches zero and no new owner has been assigned.

In the Linux kernel, the following vulnerability has been resolved: ppp: fix race conditions in ppp_fill_forward_path ppp_fill_forward_path() has two race conditions: 1. The ppp->channels list can change between list_empty() and list_first_entry(), as ppp_lock() is not held. If the only channel is deleted in ppp_disconnect_channel(), list_first_entry() may access an empty head or a freed entry, and trigger a panic. 2. pch->chan can be NULL. When ppp_unregister_channel() is called, pch->chan is set to NULL before pch is removed from ppp->channels. Fix these by using a lockless RCU approach: - Use list_first_or_null_rcu() to safely test and access the first list entry. - Convert list modifications on ppp->channels to their RCU variants and add synchronize_net() after removal. - Check for a NULL pch->chan before dereferencing it.

In the Linux kernel, the following vulnerability has been resolved: net/packet: fix a race in packet_set_ring() and packet_notifier() When packet_set_ring() releases po->bind_lock, another thread can run packet_notifier() and process an NETDEV_UP event. This race and the fix are both similar to that of commit 15fe076edea7 ("net/packet: fix a race in packet_bind() and packet_notifier()"). There too the packet_notifier NETDEV_UP event managed to run while a po->bind_lock critical section had to be temporarily released. And the fix was similarly to temporarily set po->num to zero to keep the socket unhooked until the lock is retaken. The po->bind_lock in packet_set_ring and packet_notifier precede the introduction of git history.

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix race with concurrent opens in rename(2) Besides sending the rename request to the server, the rename process also involves closing any deferred close, waiting for outstanding I/O to complete as well as marking all existing open handles as deleted to prevent them from deferring closes, which increases the race window for potential concurrent opens on the target file. Fix this by unhashing the dentry in advance to prevent any concurrent opens on the target.

In the Linux kernel, the following vulnerability has been resolved: mm/smaps: fix race between smaps_hugetlb_range and migration smaps_hugetlb_range() handles the pte without holdling ptl, and may be concurrenct with migration, leaing to BUG_ON in pfn_swap_entry_to_page(). The race is as follows. smaps_hugetlb_range migrate_pages huge_ptep_get remove_migration_ptes folio_unlock pfn_swap_entry_folio BUG_ON To fix it, hold ptl lock in smaps_hugetlb_range().

In the Linux kernel, the following vulnerability has been resolved: zram: fix slot write race condition Parallel concurrent writes to the same zram index result in leaked zsmalloc handles. Schematically we can have something like this: CPU0 CPU1 zram_slot_lock() zs_free(handle) zram_slot_lock() zram_slot_lock() zs_free(handle) zram_slot_lock() compress compress handle = zs_malloc() handle = zs_malloc() zram_slot_lock zram_set_handle(handle) zram_slot_lock zram_slot_lock zram_set_handle(handle) zram_slot_lock Either CPU0 or CPU1 zsmalloc handle will leak because zs_free() is done too early. In fact, we need to reset zram entry right before we set its new handle, all under the same slot lock scope.

In the Linux kernel, the following vulnerability has been resolved: s390/ism: fix concurrency management in ism_cmd() The s390x ISM device data sheet clearly states that only one request-response sequence is allowable per ISM function at any point in time. Unfortunately as of today the s390/ism driver in Linux does not honor that requirement. This patch aims to rectify that. This problem was discovered based on Aliaksei's bug report which states that for certain workloads the ISM functions end up entering error state (with PEC 2 as seen from the logs) after a while and as a consequence connections handled by the respective function break, and for future connection requests the ISM device is not considered -- given it is in a dysfunctional state. During further debugging PEC 3A was observed as well. A kernel message like [ 1211.244319] zpci: 061a:00:00.0: Event 0x2 reports an error for PCI function 0x61a is a reliable indicator of the stated function entering error state with PEC 2. Let me also point out that a kernel message like [ 1211.244325] zpci: 061a:00:00.0: The ism driver bound to the device does not support error recovery is a reliable indicator that the ISM function won't be auto-recovered because the ISM driver currently lacks support for it. On a technical level, without this synchronization, commands (inputs to the FW) may be partially or fully overwritten (corrupted) by another CPU trying to issue commands on the same function. There is hard evidence that this can lead to DMB token values being used as DMB IOVAs, leading to PEC 2 PCI events indicating invalid DMA. But this is only one of the failure modes imaginable. In theory even completely losing one command and executing another one twice and then trying to interpret the outputs as if the command we intended to execute was actually executed and not the other one is also possible. Frankly, I don't feel confident about providing an exhaustive list of possible consequences.

In the Linux kernel, the following vulnerability has been resolved: ftrace: Fix potential warning in trace_printk_seq during ftrace_dump When calling ftrace_dump_one() concurrently with reading trace_pipe, a WARN_ON_ONCE() in trace_printk_seq() can be triggered due to a race condition. The issue occurs because: CPU0 (ftrace_dump) CPU1 (reader) echo z > /proc/sysrq-trigger !trace_empty(&iter) trace_iterator_reset(&iter) <- len = size = 0 cat /sys/kernel/tracing/trace_pipe trace_find_next_entry_inc(&iter) __find_next_entry ring_buffer_empty_cpu <- all empty return NULL trace_printk_seq(&iter.seq) WARN_ON_ONCE(s->seq.len >= s->seq.size) In the context between trace_empty() and trace_find_next_entry_inc() during ftrace_dump, the ring buffer data was consumed by other readers. This caused trace_find_next_entry_inc to return NULL, failing to populate `iter.seq`. At this point, due to the prior trace_iterator_reset, both `iter.seq.len` and `iter.seq.size` were set to 0. Since they are equal, the WARN_ON_ONCE condition is triggered. Move the trace_printk_seq() into the if block that checks to make sure the return value of trace_find_next_entry_inc() is non-NULL in ftrace_dump_one(), ensuring the 'iter.seq' is properly populated before subsequent operations.

In the Linux kernel, the following vulnerability has been resolved: mm/vmalloc: fix data race in show_numa_info() The following data-race was found in show_numa_info(): ================================================================== BUG: KCSAN: data-race in vmalloc_info_show / vmalloc_info_show read to 0xffff88800971fe30 of 4 bytes by task 8289 on cpu 0: show_numa_info mm/vmalloc.c:4936 [inline] vmalloc_info_show+0x5a8/0x7e0 mm/vmalloc.c:5016 seq_read_iter+0x373/0xb40 fs/seq_file.c:230 proc_reg_read_iter+0x11e/0x170 fs/proc/inode.c:299 .... write to 0xffff88800971fe30 of 4 bytes by task 8287 on cpu 1: show_numa_info mm/vmalloc.c:4934 [inline] vmalloc_info_show+0x38f/0x7e0 mm/vmalloc.c:5016 seq_read_iter+0x373/0xb40 fs/seq_file.c:230 proc_reg_read_iter+0x11e/0x170 fs/proc/inode.c:299 .... value changed: 0x0000008f -> 0x00000000 ================================================================== According to this report,there is a read/write data-race because m->private is accessible to multiple CPUs. To fix this, instead of allocating the heap in proc_vmalloc_init() and passing the heap address to m->private, vmalloc_info_show() should allocate the heap.

In the Linux kernel, the following vulnerability has been resolved: NFSD: fix race between nfsd registration and exports_proc As of now nfsd calls create_proc_exports_entry() at start of init_nfsd and cleanup by remove_proc_entry() at last of exit_nfsd. Which causes kernel OOPs if there is race between below 2 operations: (i) exportfs -r (ii) mount -t nfsd none /proc/fs/nfsd for 5.4 kernel ARM64: CPU 1: el1_irq+0xbc/0x180 arch_counter_get_cntvct+0x14/0x18 running_clock+0xc/0x18 preempt_count_add+0x88/0x110 prep_new_page+0xb0/0x220 get_page_from_freelist+0x2d8/0x1778 __alloc_pages_nodemask+0x15c/0xef0 __vmalloc_node_range+0x28c/0x478 __vmalloc_node_flags_caller+0x8c/0xb0 kvmalloc_node+0x88/0xe0 nfsd_init_net+0x6c/0x108 [nfsd] ops_init+0x44/0x170 register_pernet_operations+0x114/0x270 register_pernet_subsys+0x34/0x50 init_nfsd+0xa8/0x718 [nfsd] do_one_initcall+0x54/0x2e0 CPU 2 : Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 PC is at : exports_net_open+0x50/0x68 [nfsd] Call trace: exports_net_open+0x50/0x68 [nfsd] exports_proc_open+0x2c/0x38 [nfsd] proc_reg_open+0xb8/0x198 do_dentry_open+0x1c4/0x418 vfs_open+0x38/0x48 path_openat+0x28c/0xf18 do_filp_open+0x70/0xe8 do_sys_open+0x154/0x248 Sometimes it crashes at exports_net_open() and sometimes cache_seq_next_rcu(). and same is happening on latest 6.14 kernel as well: [ 0.000000] Linux version 6.14.0-rc5-next-20250304-dirty ... [ 285.455918] Unable to handle kernel paging request at virtual address 00001f4800001f48 ... [ 285.464902] pc : cache_seq_next_rcu+0x78/0xa4 ... [ 285.469695] Call trace: [ 285.470083] cache_seq_next_rcu+0x78/0xa4 (P) [ 285.470488] seq_read+0xe0/0x11c [ 285.470675] proc_reg_read+0x9c/0xf0 [ 285.470874] vfs_read+0xc4/0x2fc [ 285.471057] ksys_read+0x6c/0xf4 [ 285.471231] __arm64_sys_read+0x1c/0x28 [ 285.471428] invoke_syscall+0x44/0x100 [ 285.471633] el0_svc_common.constprop.0+0x40/0xe0 [ 285.471870] do_el0_svc_compat+0x1c/0x34 [ 285.472073] el0_svc_compat+0x2c/0x80 [ 285.472265] el0t_32_sync_handler+0x90/0x140 [ 285.472473] el0t_32_sync+0x19c/0x1a0 [ 285.472887] Code: f9400885 93407c23 937d7c27 11000421 (f86378a3) [ 285.473422] ---[ end trace 0000000000000000 ]--- It reproduced simply with below script: while [ 1 ] do /exportfs -r done & while [ 1 ] do insmod /nfsd.ko mount -t nfsd none /proc/fs/nfsd umount /proc/fs/nfsd rmmod nfsd done & So exporting interfaces to user space shall be done at last and cleanup at first place. With change there is no Kernel OOPs.

In the Linux kernel, the following vulnerability has been resolved: NFS/localio: Fix a race in nfs_local_open_fh() Once the clp->cl_uuid.lock has been dropped, another CPU could come in and free the struct nfsd_file that was just added. To prevent that from happening, take the RCU read lock before dropping the spin lock.

In the Linux kernel, the following vulnerability has been resolved: xsk: Fix race condition in AF_XDP generic RX path Move rx_lock from xsk_socket to xsk_buff_pool. Fix synchronization for shared umem mode in generic RX path where multiple sockets share single xsk_buff_pool. RX queue is exclusive to xsk_socket, while FILL queue can be shared between multiple sockets. This could result in race condition where two CPU cores access RX path of two different sockets sharing the same umem. Protect both queues by acquiring spinlock in shared xsk_buff_pool. Lock contention may be minimized in the future by some per-thread FQ buffering. It's safe and necessary to move spin_lock_bh(rx_lock) after xsk_rcv_check(): * xs->pool and spinlock_init is synchronized by xsk_bind() -> xsk_is_bound() memory barriers. * xsk_rcv_check() may return true at the moment of xsk_release() or xsk_unbind_dev(), however this will not cause any data races or race conditions. xsk_unbind_dev() removes xdp socket from all maps and waits for completion of all outstanding rx operations. Packets in RX path will either complete safely or drop.

In the Linux kernel, the following vulnerability has been resolved: mm: userfaultfd: fix race of userfaultfd_move and swap cache This commit fixes two kinds of races, they may have different results: Barry reported a BUG_ON in commit c50f8e6053b0, we may see the same BUG_ON if the filemap lookup returned NULL and folio is added to swap cache after that. If another kind of race is triggered (folio changed after lookup) we may see RSS counter is corrupted: [ 406.893936] BUG: Bad rss-counter state mm:ffff0000c5a9ddc0 type:MM_ANONPAGES val:-1 [ 406.894071] BUG: Bad rss-counter state mm:ffff0000c5a9ddc0 type:MM_SHMEMPAGES val:1 Because the folio is being accounted to the wrong VMA. I'm not sure if there will be any data corruption though, seems no. The issues above are critical already. On seeing a swap entry PTE, userfaultfd_move does a lockless swap cache lookup, and tries to move the found folio to the faulting vma. Currently, it relies on checking the PTE value to ensure that the moved folio still belongs to the src swap entry and that no new folio has been added to the swap cache, which turns out to be unreliable. While working and reviewing the swap table series with Barry, following existing races are observed and reproduced [1]: In the example below, move_pages_pte is moving src_pte to dst_pte, where src_pte is a swap entry PTE holding swap entry S1, and S1 is not in the swap cache: CPU1 CPU2 userfaultfd_move move_pages_pte() entry = pte_to_swp_entry(orig_src_pte); // Here it got entry = S1 ... < interrupted> ... <swapin src_pte, alloc and use folio A> // folio A is a new allocated folio // and get installed into src_pte <frees swap entry S1> // src_pte now points to folio A, S1 // has swap count == 0, it can be freed // by folio_swap_swap or swap // allocator's reclaim. <try to swap out another folio B> // folio B is a folio in another VMA. <put folio B to swap cache using S1 > // S1 is freed, folio B can use it // for swap out with no problem. ... folio = filemap_get_folio(S1) // Got folio B here !!! ... < interrupted again> ... <swapin folio B and free S1> // Now S1 is free to be used again. <swapout src_pte & folio A using S1> // Now src_pte is a swap entry PTE // holding S1 again. folio_trylock(folio) move_swap_pte double_pt_lock is_pte_pages_stable // Check passed because src_pte == S1 folio_move_anon_rmap(...) // Moved invalid folio B here !!! The race window is very short and requires multiple collisions of multiple rare events, so it's very unlikely to happen, but with a deliberately constructed reproducer and increased time window, it can be reproduced easily. This can be fixed by checking if the folio returned by filemap is the valid swap cache folio after acquiring the folio lock. Another similar race is possible: filemap_get_folio may return NULL, but folio (A) could be swapped in and then swapped out again using the same swap entry after the lookup. In such a case, folio (A) may remain in the swap cache, so it must be moved too: CPU1 CPU2 userfaultfd_move move_pages_pte() entry = pte_to_swp_entry(orig_src_pte); // Here it got entry = S1, and S1 is not in swap cache folio = filemap_get ---truncated---

In the Linux kernel, the following vulnerability has been resolved: USB: wdm: close race between wdm_open and wdm_wwan_port_stop Clearing WDM_WWAN_IN_USE must be the last action or we can open a chardev whose URBs are still poisoned

In the Linux kernel, the following vulnerability has been resolved: sched/rt: Fix race in push_rt_task Overview ======== When a CPU chooses to call push_rt_task and picks a task to push to another CPU's runqueue then it will call find_lock_lowest_rq method which would take a double lock on both CPUs' runqueues. If one of the locks aren't readily available, it may lead to dropping the current runqueue lock and reacquiring both the locks at once. During this window it is possible that the task is already migrated and is running on some other CPU. These cases are already handled. However, if the task is migrated and has already been executed and another CPU is now trying to wake it up (ttwu) such that it is queued again on the runqeue (on_rq is 1) and also if the task was run by the same CPU, then the current checks will pass even though the task was migrated out and is no longer in the pushable tasks list. Crashes ======= This bug resulted in quite a few flavors of crashes triggering kernel panics with various crash signatures such as assert failures, page faults, null pointer dereferences, and queue corruption errors all coming from scheduler itself. Some of the crashes: -> kernel BUG at kernel/sched/rt.c:1616! BUG_ON(idx >= MAX_RT_PRIO) Call Trace: ? __die_body+0x1a/0x60 ? die+0x2a/0x50 ? do_trap+0x85/0x100 ? pick_next_task_rt+0x6e/0x1d0 ? do_error_trap+0x64/0xa0 ? pick_next_task_rt+0x6e/0x1d0 ? exc_invalid_op+0x4c/0x60 ? pick_next_task_rt+0x6e/0x1d0 ? asm_exc_invalid_op+0x12/0x20 ? pick_next_task_rt+0x6e/0x1d0 __schedule+0x5cb/0x790 ? update_ts_time_stats+0x55/0x70 schedule_idle+0x1e/0x40 do_idle+0x15e/0x200 cpu_startup_entry+0x19/0x20 start_secondary+0x117/0x160 secondary_startup_64_no_verify+0xb0/0xbb -> BUG: kernel NULL pointer dereference, address: 00000000000000c0 Call Trace: ? __die_body+0x1a/0x60 ? no_context+0x183/0x350 ? __warn+0x8a/0xe0 ? exc_page_fault+0x3d6/0x520 ? asm_exc_page_fault+0x1e/0x30 ? pick_next_task_rt+0xb5/0x1d0 ? pick_next_task_rt+0x8c/0x1d0 __schedule+0x583/0x7e0 ? update_ts_time_stats+0x55/0x70 schedule_idle+0x1e/0x40 do_idle+0x15e/0x200 cpu_startup_entry+0x19/0x20 start_secondary+0x117/0x160 secondary_startup_64_no_verify+0xb0/0xbb -> BUG: unable to handle page fault for address: ffff9464daea5900 kernel BUG at kernel/sched/rt.c:1861! BUG_ON(rq->cpu != task_cpu(p)) -> kernel BUG at kernel/sched/rt.c:1055! BUG_ON(!rq->nr_running) Call Trace: ? __die_body+0x1a/0x60 ? die+0x2a/0x50 ? do_trap+0x85/0x100 ? dequeue_top_rt_rq+0xa2/0xb0 ? do_error_trap+0x64/0xa0 ? dequeue_top_rt_rq+0xa2/0xb0 ? exc_invalid_op+0x4c/0x60 ? dequeue_top_rt_rq+0xa2/0xb0 ? asm_exc_invalid_op+0x12/0x20 ? dequeue_top_rt_rq+0xa2/0xb0 dequeue_rt_entity+0x1f/0x70 dequeue_task_rt+0x2d/0x70 __schedule+0x1a8/0x7e0 ? blk_finish_plug+0x25/0x40 schedule+0x3c/0xb0 futex_wait_queue_me+0xb6/0x120 futex_wait+0xd9/0x240 do_futex+0x344/0xa90 ? get_mm_exe_file+0x30/0x60 ? audit_exe_compare+0x58/0x70 ? audit_filter_rules.constprop.26+0x65e/0x1220 __x64_sys_futex+0x148/0x1f0 do_syscall_64+0x30/0x80 entry_SYSCALL_64_after_hwframe+0x62/0xc7 -> BUG: unable to handle page fault for address: ffff8cf3608bc2c0 Call Trace: ? __die_body+0x1a/0x60 ? no_context+0x183/0x350 ? spurious_kernel_fault+0x171/0x1c0 ? exc_page_fault+0x3b6/0x520 ? plist_check_list+0x15/0x40 ? plist_check_list+0x2e/0x40 ? asm_exc_page_fault+0x1e/0x30 ? _cond_resched+0x15/0x30 ? futex_wait_queue_me+0xc8/0x120 ? futex_wait+0xd9/0x240 ? try_to_wake_up+0x1b8/0x490 ? futex_wake+0x78/0x160 ? do_futex+0xcd/0xa90 ? plist_check_list+0x15/0x40 ? plist_check_list+0x2e/0x40 ? plist_del+0x6a/0xd0 ? plist_check_list+0x15/0x40 ? plist_check_list+0x2e/0x40 ? dequeue_pushable_task+0x20/0x70 ? __schedule+0x382/0x7e0 ? asm_sysvec_reschedule_i ---truncated---

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: u_serial: Fix race condition in TTY wakeup A race condition occurs when gs_start_io() calls either gs_start_rx() or gs_start_tx(), as those functions briefly drop the port_lock for usb_ep_queue(). This allows gs_close() and gserial_disconnect() to clear port.tty and port_usb, respectively. Use the null-safe TTY Port helper function to wake up TTY. Example CPU1: CPU2: gserial_connect() // lock gs_close() // await lock gs_start_rx() // unlock usb_ep_queue() gs_close() // lock, reset port.tty and unlock gs_start_rx() // lock tty_wakeup() // NPE

In the Linux kernel, the following vulnerability has been resolved: NFSv4/pNFS: Fix a race to wake on NFS_LAYOUT_DRAIN We found a few different systems hung up in writeback waiting on the same page lock, and one task waiting on the NFS_LAYOUT_DRAIN bit in pnfs_update_layout(), however the pnfs_layout_hdr's plh_outstanding count was zero. It seems most likely that this is another race between the waiter and waker similar to commit ed0172af5d6f ("SUNRPC: Fix a race to wake a sync task"). Fix it up by applying the advised barrier.

In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix huge_pmd_unshare() vs GUP-fast race huge_pmd_unshare() drops a reference on a page table that may have previously been shared across processes, potentially turning it into a normal page table used in another process in which unrelated VMAs can afterwards be installed. If this happens in the middle of a concurrent gup_fast(), gup_fast() could end up walking the page tables of another process. While I don't see any way in which that immediately leads to kernel memory corruption, it is really weird and unexpected. Fix it with an explicit broadcast IPI through tlb_remove_table_sync_one(), just like we do in khugepaged when removing page tables for a THP collapse.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix race between DIM disable and net_dim() There's a race between disabling DIM and NAPI callbacks using the dim pointer on the RQ or SQ. If NAPI checks the DIM state bit and sees it still set, it assumes `rq->dim` or `sq->dim` is valid. But if DIM gets disabled right after that check, the pointer might already be set to NULL, leading to a NULL pointer dereference in net_dim(). Fix this by calling `synchronize_net()` before freeing the DIM context. This ensures all in-progress NAPI callbacks are finished before the pointer is cleared. Kernel log: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... RIP: 0010:net_dim+0x23/0x190 ... Call Trace: <TASK> ? __die+0x20/0x60 ? page_fault_oops+0x150/0x3e0 ? common_interrupt+0xf/0xa0 ? sysvec_call_function_single+0xb/0x90 ? exc_page_fault+0x74/0x130 ? asm_exc_page_fault+0x22/0x30 ? net_dim+0x23/0x190 ? mlx5e_poll_ico_cq+0x41/0x6f0 [mlx5_core] ? sysvec_apic_timer_interrupt+0xb/0x90 mlx5e_handle_rx_dim+0x92/0xd0 [mlx5_core] mlx5e_napi_poll+0x2cd/0xac0 [mlx5_core] ? mlx5e_poll_ico_cq+0xe5/0x6f0 [mlx5_core] busy_poll_stop+0xa2/0x200 ? mlx5e_napi_poll+0x1d9/0xac0 [mlx5_core] ? mlx5e_trigger_irq+0x130/0x130 [mlx5_core] __napi_busy_loop+0x345/0x3b0 ? sysvec_call_function_single+0xb/0x90 ? asm_sysvec_call_function_single+0x16/0x20 ? sysvec_apic_timer_interrupt+0xb/0x90 ? pcpu_free_area+0x1e4/0x2e0 napi_busy_loop+0x11/0x20 xsk_recvmsg+0x10c/0x130 sock_recvmsg+0x44/0x70 __sys_recvfrom+0xbc/0x130 ? __schedule+0x398/0x890 __x64_sys_recvfrom+0x20/0x30 do_syscall_64+0x4c/0x100 entry_SYSCALL_64_after_hwframe+0x4b/0x53 ... ---[ end trace 0000000000000000 ]--- ... ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix race between async reclaim worker and close_ctree() Syzbot reported an assertion failure due to an attempt to add a delayed iput after we have set BTRFS_FS_STATE_NO_DELAYED_IPUT in the fs_info state: WARNING: CPU: 0 PID: 65 at fs/btrfs/inode.c:3420 btrfs_add_delayed_iput+0x2f8/0x370 fs/btrfs/inode.c:3420 Modules linked in: CPU: 0 UID: 0 PID: 65 Comm: kworker/u8:4 Not tainted 6.15.0-next-20250530-syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 Workqueue: btrfs-endio-write btrfs_work_helper RIP: 0010:btrfs_add_delayed_iput+0x2f8/0x370 fs/btrfs/inode.c:3420 Code: 4e ad 5d (...) RSP: 0018:ffffc9000213f780 EFLAGS: 00010293 RAX: ffffffff83c635b7 RBX: ffff888058920000 RCX: ffff88801c769e00 RDX: 0000000000000000 RSI: 0000000000000100 RDI: 0000000000000000 RBP: 0000000000000001 R08: ffff888058921b67 R09: 1ffff1100b12436c R10: dffffc0000000000 R11: ffffed100b12436d R12: 0000000000000001 R13: dffffc0000000000 R14: ffff88807d748000 R15: 0000000000000100 FS: 0000000000000000(0000) GS:ffff888125c53000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00002000000bd038 CR3: 000000006a142000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> btrfs_put_ordered_extent+0x19f/0x470 fs/btrfs/ordered-data.c:635 btrfs_finish_one_ordered+0x11d8/0x1b10 fs/btrfs/inode.c:3312 btrfs_work_helper+0x399/0xc20 fs/btrfs/async-thread.c:312 process_one_work kernel/workqueue.c:3238 [inline] process_scheduled_works+0xae1/0x17b0 kernel/workqueue.c:3321 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3402 kthread+0x70e/0x8a0 kernel/kthread.c:464 ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> This can happen due to a race with the async reclaim worker like this: 1) The async metadata reclaim worker enters shrink_delalloc(), which calls btrfs_start_delalloc_roots() with an nr_pages argument that has a value less than LONG_MAX, and that in turn enters start_delalloc_inodes(), which sets the local variable 'full_flush' to false because wbc->nr_to_write is less than LONG_MAX; 2) There it finds inode X in a root's delalloc list, grabs a reference for inode X (with igrab()), and triggers writeback for it with filemap_fdatawrite_wbc(), which creates an ordered extent for inode X; 3) The unmount sequence starts from another task, we enter close_ctree() and we flush the workqueue fs_info->endio_write_workers, which waits for the ordered extent for inode X to complete and when dropping the last reference of the ordered extent, with btrfs_put_ordered_extent(), when we call btrfs_add_delayed_iput() we don't add the inode to the list of delayed iputs because it has a refcount of 2, so we decrement it to 1 and return; 4) Shortly after at close_ctree() we call btrfs_run_delayed_iputs() which runs all delayed iputs, and then we set BTRFS_FS_STATE_NO_DELAYED_IPUT in the fs_info state; 5) The async reclaim worker, after calling filemap_fdatawrite_wbc(), now calls btrfs_add_delayed_iput() for inode X and there we trigger an assertion failure since the fs_info state has the flag BTRFS_FS_STATE_NO_DELAYED_IPUT set. Fix this by setting BTRFS_FS_STATE_NO_DELAYED_IPUT only after we wait for the async reclaim workers to finish, after we call cancel_work_sync() for them at close_ctree(), and by running delayed iputs after wait for the reclaim workers to finish and before setting the bit. This race was recently introduced by commit 19e60b2a95f5 ("btrfs: add extra warning if delayed iput is added when it's not allowed"). Without the new validation at btrfs_add_delayed_iput(), ---truncated---

In the Linux kernel, the following vulnerability has been resolved: mm/page_alloc: fix race condition in unaccepted memory handling The page allocator tracks the number of zones that have unaccepted memory using static_branch_enc/dec() and uses that static branch in hot paths to determine if it needs to deal with unaccepted memory. Borislav and Thomas pointed out that the tracking is racy: operations on static_branch are not serialized against adding/removing unaccepted pages to/from the zone. Sanity checks inside static_branch machinery detects it: WARNING: CPU: 0 PID: 10 at kernel/jump_label.c:276 __static_key_slow_dec_cpuslocked+0x8e/0xa0 The comment around the WARN() explains the problem: /* * Warn about the '-1' case though; since that means a * decrement is concurrent with a first (0->1) increment. IOW * people are trying to disable something that wasn't yet fully * enabled. This suggests an ordering problem on the user side. */ The effect of this static_branch optimization is only visible on microbenchmark. Instead of adding more complexity around it, remove it altogether.

In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: Fix race of buffer access at PCM OSS layer The PCM OSS layer tries to clear the buffer with the silence data at initialization (or reconfiguration) of a stream with the explicit call of snd_pcm_format_set_silence() with runtime->dma_area. But this may lead to a UAF because the accessed runtime->dma_area might be freed concurrently, as it's performed outside the PCM ops. For avoiding it, move the code into the PCM core and perform it inside the buffer access lock, so that it won't be changed during the operation.

In the Linux kernel, the following vulnerability has been resolved: fix a couple of races in MNT_TREE_BENEATH handling by do_move_mount() Normally do_lock_mount(path, _) is locking a mountpoint pinned by *path and at the time when matching unlock_mount() unlocks that location it is still pinned by the same thing. Unfortunately, for 'beneath' case it's no longer that simple - the object being locked is not the one *path points to. It's the mountpoint of path->mnt. The thing is, without sufficient locking ->mnt_parent may change under us and none of the locks are held at that point. The rules are * mount_lock stabilizes m->mnt_parent for any mount m. * namespace_sem stabilizes m->mnt_parent, provided that m is mounted. * if either of the above holds and refcount of m is positive, we are guaranteed the same for refcount of m->mnt_parent. namespace_sem nests inside inode_lock(), so do_lock_mount() has to take inode_lock() before grabbing namespace_sem. It does recheck that path->mnt is still mounted in the same place after getting namespace_sem, and it does take care to pin the dentry. It is needed, since otherwise we might end up with racing mount --move (or umount) happening while we were getting locks; in that case dentry would no longer be a mountpoint and could've been evicted on memory pressure along with its inode - not something you want when grabbing lock on that inode. However, pinning a dentry is not enough - the matching mount is also pinned only by the fact that path->mnt is mounted on top it and at that point we are not holding any locks whatsoever, so the same kind of races could end up with all references to that mount gone just as we are about to enter inode_lock(). If that happens, we are left with filesystem being shut down while we are holding a dentry reference on it; results are not pretty. What we need to do is grab both dentry and mount at the same time; that makes inode_lock() safe *and* avoids the problem with fs getting shut down under us. After taking namespace_sem we verify that path->mnt is still mounted (which stabilizes its ->mnt_parent) and check that it's still mounted at the same place. From that point on to the matching namespace_unlock() we are guaranteed that mount/dentry pair we'd grabbed are also pinned by being the mountpoint of path->mnt, so we can quietly drop both the dentry reference (as the current code does) and mnt one - it's OK to do under namespace_sem, since we are not dropping the final refs. That solves the problem on do_lock_mount() side; unlock_mount() also has one, since dentry is guaranteed to stay pinned only until the namespace_unlock(). That's easy to fix - just have inode_unlock() done earlier, while it's still pinned by mp->m_dentry.

An issue was discovered in drivers/bluetooth/hci_ldisc.c in the Linux kernel 6.2. In hci_uart_tty_ioctl, there is a race condition between HCIUARTSETPROTO and HCIUARTGETPROTO. HCI_UART_PROTO_SET is set before hu->proto is set. A NULL pointer dereference may occur.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Replace Mutex with Spinlock for RLCG register access to avoid Priority Inversion in SRIOV RLCG Register Access is a way for virtual functions to safely access GPU registers in a virtualized environment., including TLB flushes and register reads. When multiple threads or VFs try to access the same registers simultaneously, it can lead to race conditions. By using the RLCG interface, the driver can serialize access to the registers. This means that only one thread can access the registers at a time, preventing conflicts and ensuring that operations are performed correctly. Additionally, when a low-priority task holds a mutex that a high-priority task needs, ie., If a thread holding a spinlock tries to acquire a mutex, it can lead to priority inversion. register access in amdgpu_virt_rlcg_reg_rw especially in a fast code path is critical. The call stack shows that the function amdgpu_virt_rlcg_reg_rw is being called, which attempts to acquire the mutex. This function is invoked from amdgpu_sriov_wreg, which in turn is called from gmc_v11_0_flush_gpu_tlb. The [ BUG: Invalid wait context ] indicates that a thread is trying to acquire a mutex while it is in a context that does not allow it to sleep (like holding a spinlock). Fixes the below: [ 253.013423] ============================= [ 253.013434] [ BUG: Invalid wait context ] [ 253.013446] 6.12.0-amdstaging-drm-next-lol-050225 #14 Tainted: G U OE [ 253.013464] ----------------------------- [ 253.013475] kworker/0:1/10 is trying to lock: [ 253.013487] ffff9f30542e3cf8 (&adev->virt.rlcg_reg_lock){+.+.}-{3:3}, at: amdgpu_virt_rlcg_reg_rw+0xf6/0x330 [amdgpu] [ 253.013815] other info that might help us debug this: [ 253.013827] context-{4:4} [ 253.013835] 3 locks held by kworker/0:1/10: [ 253.013847] #0: ffff9f3040050f58 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x3f5/0x680 [ 253.013877] #1: ffffb789c008be40 ((work_completion)(&wfc.work)){+.+.}-{0:0}, at: process_one_work+0x1d6/0x680 [ 253.013905] #2: ffff9f3054281838 (&adev->gmc.invalidate_lock){+.+.}-{2:2}, at: gmc_v11_0_flush_gpu_tlb+0x198/0x4f0 [amdgpu] [ 253.014154] stack backtrace: [ 253.014164] CPU: 0 UID: 0 PID: 10 Comm: kworker/0:1 Tainted: G U OE 6.12.0-amdstaging-drm-next-lol-050225 #14 [ 253.014189] Tainted: [U]=USER, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE [ 253.014203] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 11/18/2024 [ 253.014224] Workqueue: events work_for_cpu_fn [ 253.014241] Call Trace: [ 253.014250] <TASK> [ 253.014260] dump_stack_lvl+0x9b/0xf0 [ 253.014275] dump_stack+0x10/0x20 [ 253.014287] __lock_acquire+0xa47/0x2810 [ 253.014303] ? srso_alias_return_thunk+0x5/0xfbef5 [ 253.014321] lock_acquire+0xd1/0x300 [ 253.014333] ? amdgpu_virt_rlcg_reg_rw+0xf6/0x330 [amdgpu] [ 253.014562] ? __lock_acquire+0xa6b/0x2810 [ 253.014578] __mutex_lock+0x85/0xe20 [ 253.014591] ? amdgpu_virt_rlcg_reg_rw+0xf6/0x330 [amdgpu] [ 253.014782] ? sched_clock_noinstr+0x9/0x10 [ 253.014795] ? srso_alias_return_thunk+0x5/0xfbef5 [ 253.014808] ? local_clock_noinstr+0xe/0xc0 [ 253.014822] ? amdgpu_virt_rlcg_reg_rw+0xf6/0x330 [amdgpu] [ 253.015012] ? srso_alias_return_thunk+0x5/0xfbef5 [ 253.015029] mutex_lock_nested+0x1b/0x30 [ 253.015044] ? mutex_lock_nested+0x1b/0x30 [ 253.015057] amdgpu_virt_rlcg_reg_rw+0xf6/0x330 [amdgpu] [ 253.015249] amdgpu_sriov_wreg+0xc5/0xd0 [amdgpu] [ 253.015435] gmc_v11_0_flush_gpu_tlb+0x44b/0x4f0 [amdgpu] [ 253.015667] gfx_v11_0_hw_init+0x499/0x29c0 [amdgpu] [ 253.015901] ? __pfx_smu_v13_0_update_pcie_parameters+0x10/0x10 [amdgpu] [ 253.016159] ? srso_alias_return_thunk+0x5/0xfbef5 [ 253.016173] ? smu_hw_init+0x18d/0x300 [amdgpu] [ 253.016403] amdgpu_device_init+0x29ad/0x36a0 [amdgpu] [ 253.016614] amdgpu_driver_load_kms+0x1a/0xc0 [amdgpu] [ 253.0170 ---truncated---

There is a null-pointer-dereference flaw found in f2fs_write_end_io in fs/f2fs/data.c in the Linux kernel. This flaw allows a local privileged user to cause a denial of service problem.

A race condition accessing file object in the Linux kernel OverlayFS subsystem was found in the way users do rename in specific way with OverlayFS. A local user could use this flaw to crash the system.

NVIDIA Linux GPU Display Driver, all versions, contains a vulnerability in the UVM driver, in which a race condition may lead to a denial of service.

An issue was discovered in the lock_api crate before 0.4.2 for Rust. A data race can occur because of MappedRwLockWriteGuard unsoundness.

An issue was discovered in the arr crate through 2020-08-25 for Rust. An attacker can smuggle non-Sync/Send types across a thread boundary to cause a data race.

An issue was discovered in the concread crate before 0.2.6 for Rust. Attackers can cause an ARCache<K,V> data race by sending types that do not implement Send/Sync.

An issue was discovered in the lock_api crate before 0.4.2 for Rust. A data race can occur because of MappedRwLockReadGuard unsoundness.

An issue was discovered in the reffers crate through 2020-12-01 for Rust. ARefss can contain a !Send,!Sync object, leading to a data race and memory corruption.

An issue was discovered in the lock_api crate before 0.4.2 for Rust. A data race can occur because of RwLockWriteGuard unsoundness.

An issue was discovered in the Linux kernel through 5.9.1, as used with Xen through 4.14.x. drivers/xen/events/events_base.c allows event-channel removal during the event-handling loop (a race condition). This can cause a use-after-free or NULL pointer dereference, as demonstrated by a dom0 crash via events for an in-reconfiguration paravirtualized device, aka CID-073d0552ead5.

An issue was discovered in Xen through 4.14.x. There is a race condition when migrating timers between x86 HVM vCPUs. When migrating timers of x86 HVM guests between its vCPUs, the locking model used allows for a second vCPU of the same guest (also operating on the timers) to release a lock that it didn't acquire. The most likely effect of the issue is a hang or crash of the hypervisor, i.e., a Denial of Service (DoS). All versions of Xen are affected. Only x86 systems are vulnerable. Arm systems are not vulnerable. Only x86 HVM guests can leverage the vulnerability. x86 PV and PVH cannot leverage the vulnerability. Only guests with more than one vCPU can exploit the vulnerability.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix race between quota enable and quota rescan ioctl When enabling quotas, at btrfs_quota_enable(), after committing the transaction, we change fs_info->quota_root to point to the quota root we created and set BTRFS_FS_QUOTA_ENABLED at fs_info->flags. Then we try to start the qgroup rescan worker, first by initializing it with a call to qgroup_rescan_init() - however if that fails we end up freeing the quota root but we leave fs_info->quota_root still pointing to it, this can later result in a use-after-free somewhere else. We have previously set the flags BTRFS_FS_QUOTA_ENABLED and BTRFS_QGROUP_STATUS_FLAG_ON, so we can only fail with -EINPROGRESS at btrfs_quota_enable(), which is possible if someone already called the quota rescan ioctl, and therefore started the rescan worker. So fix this by ignoring an -EINPROGRESS and asserting we can't get any other error.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix a data-race around bpf_jit_limit. While reading bpf_jit_limit, it can be changed concurrently via sysctl, WRITE_ONCE() in __do_proc_doulongvec_minmax(). The size of bpf_jit_limit is long, so we need to add a paired READ_ONCE() to avoid load-tearing.

In the Linux kernel, the following vulnerability has been resolved: net: qrtr: start MHI channel after endpoit creation MHI channel may generates event/interrupt right after enabling. It may leads to 2 race conditions issues. 1) Such event may be dropped by qcom_mhi_qrtr_dl_callback() at check: if (!qdev || mhi_res->transaction_status) return; Because dev_set_drvdata(&mhi_dev->dev, qdev) may be not performed at this moment. In this situation qrtr-ns will be unable to enumerate services in device. --------------------------------------------------------------- 2) Such event may come at the moment after dev_set_drvdata() and before qrtr_endpoint_register(). In this case kernel will panic with accessing wrong pointer at qcom_mhi_qrtr_dl_callback(): rc = qrtr_endpoint_post(&qdev->ep, mhi_res->buf_addr, mhi_res->bytes_xferd); Because endpoint is not created yet. -------------------------------------------------------------- So move mhi_prepare_for_transfer_autoqueue after endpoint creation to fix it.