In wlan driver, there is a race condition. This could lead to local denial of service in wlan services.

In wlan driver, there is a race condition, This could lead to local denial of service in wlan services.

A use-after-free vulnerability was found in network namespaces code affecting the Linux kernel before 4.14.11. The function get_net_ns_by_id() in net/core/net_namespace.c does not check for the net::count value after it has found a peer network in netns_ids idr, which could lead to double free and memory corruption. This vulnerability could allow an unprivileged local user to induce kernel memory corruption on the system, leading to a crash. Due to the nature of the flaw, privilege escalation cannot be fully ruled out, although it is thought to be unlikely.

An issue was discovered in the Linux kernel through 5.19.8. drivers/firmware/efi/capsule-loader.c has a race condition with a resultant use-after-free.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Check for NOT_READY flag state after locking Currently the check for NOT_READY flag is performed before obtaining the necessary lock. This opens a possibility for race condition when the flow is concurrently removed from unready_flows list by the workqueue task, which causes a double-removal from the list and a crash[0]. Fix the issue by moving the flag check inside the section protected by uplink_priv->unready_flows_lock mutex. [0]: [44376.389654] general protection fault, probably for non-canonical address 0xdead000000000108: 0000 [#1] SMP [44376.391665] CPU: 7 PID: 59123 Comm: tc Not tainted 6.4.0-rc4+ #1 [44376.392984] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [44376.395342] RIP: 0010:mlx5e_tc_del_fdb_flow+0xb3/0x340 [mlx5_core] [44376.396857] Code: 00 48 8b b8 68 ce 02 00 e8 8a 4d 02 00 4c 8d a8 a8 01 00 00 4c 89 ef e8 8b 79 88 e1 48 8b 83 98 06 00 00 48 8b 93 90 06 00 00 <48> 89 42 08 48 89 10 48 b8 00 01 00 00 00 00 ad de 48 89 83 90 06 [44376.399167] RSP: 0018:ffff88812cc97570 EFLAGS: 00010246 [44376.399680] RAX: dead000000000122 RBX: ffff8881088e3800 RCX: ffff8881881bac00 [44376.400337] RDX: dead000000000100 RSI: ffff88812cc97500 RDI: ffff8881242f71b0 [44376.401001] RBP: ffff88811cbb0940 R08: 0000000000000400 R09: 0000000000000001 [44376.401663] R10: 0000000000000001 R11: 0000000000000000 R12: ffff88812c944000 [44376.402342] R13: ffff8881242f71a8 R14: ffff8881222b4000 R15: 0000000000000000 [44376.402999] FS: 00007f0451104800(0000) GS:ffff88852cb80000(0000) knlGS:0000000000000000 [44376.403787] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [44376.404343] CR2: 0000000000489108 CR3: 0000000123a79003 CR4: 0000000000370ea0 [44376.405004] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [44376.405665] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [44376.406339] Call Trace: [44376.406651] <TASK> [44376.406939] ? die_addr+0x33/0x90 [44376.407311] ? exc_general_protection+0x192/0x390 [44376.407795] ? asm_exc_general_protection+0x22/0x30 [44376.408292] ? mlx5e_tc_del_fdb_flow+0xb3/0x340 [mlx5_core] [44376.408876] __mlx5e_tc_del_fdb_peer_flow+0xbc/0xe0 [mlx5_core] [44376.409482] mlx5e_tc_del_flow+0x42/0x210 [mlx5_core] [44376.410055] mlx5e_flow_put+0x25/0x50 [mlx5_core] [44376.410529] mlx5e_delete_flower+0x24b/0x350 [mlx5_core] [44376.411043] tc_setup_cb_reoffload+0x22/0x80 [44376.411462] fl_reoffload+0x261/0x2f0 [cls_flower] [44376.411907] ? mlx5e_rep_indr_setup_ft_cb+0x160/0x160 [mlx5_core] [44376.412481] ? mlx5e_rep_indr_setup_ft_cb+0x160/0x160 [mlx5_core] [44376.413044] tcf_block_playback_offloads+0x76/0x170 [44376.413497] tcf_block_unbind+0x7b/0xd0 [44376.413881] tcf_block_setup+0x17d/0x1c0 [44376.414269] tcf_block_offload_cmd.isra.0+0xf1/0x130 [44376.414725] tcf_block_offload_unbind+0x43/0x70 [44376.415153] __tcf_block_put+0x82/0x150 [44376.415532] ingress_destroy+0x22/0x30 [sch_ingress] [44376.415986] qdisc_destroy+0x3b/0xd0 [44376.416343] qdisc_graft+0x4d0/0x620 [44376.416706] tc_get_qdisc+0x1c9/0x3b0 [44376.417074] rtnetlink_rcv_msg+0x29c/0x390 [44376.419978] ? rep_movs_alternative+0x3a/0xa0 [44376.420399] ? rtnl_calcit.isra.0+0x120/0x120 [44376.420813] netlink_rcv_skb+0x54/0x100 [44376.421192] netlink_unicast+0x1f6/0x2c0 [44376.421573] netlink_sendmsg+0x232/0x4a0 [44376.421980] sock_sendmsg+0x38/0x60 [44376.422328] ____sys_sendmsg+0x1d0/0x1e0 [44376.422709] ? copy_msghdr_from_user+0x6d/0xa0 [44376.423127] ___sys_sendmsg+0x80/0xc0 [44376.423495] ? ___sys_recvmsg+0x8b/0xc0 [44376.423869] __sys_sendmsg+0x51/0x90 [44376.424226] do_syscall_64+0x3d/0x90 [44376.424587] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [44376.425046] RIP: 0033:0x7f045134f887 [44376.425403] Code: 0a 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: power: supply: bq25890: Fix external_power_changed race bq25890_charger_external_power_changed() dereferences bq->charger, which gets sets in bq25890_power_supply_init() like this: bq->charger = devm_power_supply_register(bq->dev, &bq->desc, &psy_cfg); As soon as devm_power_supply_register() has called device_add() the external_power_changed callback can get called. So there is a window where bq25890_charger_external_power_changed() may get called while bq->charger has not been set yet leading to a NULL pointer dereference. This race hits during boot sometimes on a Lenovo Yoga Book 1 yb1-x90f when the cht_wcove_pwrsrc (extcon) power_supply is done with detecting the connected charger-type which happens to exactly hit the small window: BUG: kernel NULL pointer dereference, address: 0000000000000018 <snip> RIP: 0010:__power_supply_is_supplied_by+0xb/0xb0 <snip> Call Trace: <TASK> __power_supply_get_supplier_property+0x19/0x50 class_for_each_device+0xb1/0xe0 power_supply_get_property_from_supplier+0x2e/0x50 bq25890_charger_external_power_changed+0x38/0x1b0 [bq25890_charger] __power_supply_changed_work+0x30/0x40 class_for_each_device+0xb1/0xe0 power_supply_changed_work+0x5f/0xe0 <snip> Fixing this is easy. The external_power_changed callback gets passed the power_supply which will eventually get stored in bq->charger, so bq25890_charger_external_power_changed() can simply directly use the passed in psy argument which is always valid.

A race condition flaw was found in the Linux kernel sound subsystem due to improper locking. It could lead to a NULL pointer dereference while handling the SNDCTL_DSP_SYNC ioctl. A privileged local user (root or member of the audio group) could use this flaw to crash the system, resulting in a denial of service condition

In audio driver, there is a use after free due to a race condition. This could lead to local denial of service in kernel.

In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Fix race condition when unbinding BOs Fix 'Memory manager not clean during takedown' warning that occurs when ivpu_gem_bo_free() removes the BO from the BOs list before it gets unmapped. Then file_priv_unbind() triggers a warning in drm_mm_takedown() during context teardown. Protect the unmapping sequence with bo_list_lock to ensure the BO is always fully unmapped when removed from the list. This ensures the BO is either fully unmapped at context teardown time or present on the list and unmapped by file_priv_unbind().

Multi-thread race condition vulnerability in the video framework module. Impact: Successful exploitation of this vulnerability may affect availability.

Multi-thread race condition vulnerability in the camera framework module. Impact: Successful exploitation of this vulnerability may affect availability.

Multi-thread race condition vulnerability in the card framework module. Impact: Successful exploitation of this vulnerability may affect availability.

Multi-thread race condition vulnerability in the card framework module. Impact: Successful exploitation of this vulnerability may affect availability.

Multi-thread race condition vulnerability in the card framework module. Impact: Successful exploitation of this vulnerability may affect availability.

Multi-thread race condition vulnerability in the card framework module. Impact: Successful exploitation of this vulnerability may affect availability.

Multi-thread race condition vulnerability in the camera framework module. Impact: Successful exploitation of this vulnerability may affect availability.

Multi-thread race condition vulnerability in the thermal management module. Impact: Successful exploitation of this vulnerability may affect availability.

In the Linux kernel, the following vulnerability has been resolved: timers: Fix NULL function pointer race in timer_shutdown_sync() There is a race condition between timer_shutdown_sync() and timer expiration that can lead to hitting a WARN_ON in expire_timers(). The issue occurs when timer_shutdown_sync() clears the timer function to NULL while the timer is still running on another CPU. The race scenario looks like this: CPU0 CPU1 <SOFTIRQ> lock_timer_base() expire_timers() base->running_timer = timer; unlock_timer_base() [call_timer_fn enter] mod_timer() ... timer_shutdown_sync() lock_timer_base() // For now, will not detach the timer but only clear its function to NULL if (base->running_timer != timer) ret = detach_if_pending(timer, base, true); if (shutdown) timer->function = NULL; unlock_timer_base() [call_timer_fn exit] lock_timer_base() base->running_timer = NULL; unlock_timer_base() ... // Now timer is pending while its function set to NULL. // next timer trigger <SOFTIRQ> expire_timers() WARN_ON_ONCE(!fn) // hit ... lock_timer_base() // Now timer will detach if (base->running_timer != timer) ret = detach_if_pending(timer, base, true); if (shutdown) timer->function = NULL; unlock_timer_base() The problem is that timer_shutdown_sync() clears the timer function regardless of whether the timer is currently running. This can leave a pending timer with a NULL function pointer, which triggers the WARN_ON_ONCE(!fn) check in expire_timers(). Fix this by only clearing the timer function when actually detaching the timer. If the timer is running, leave the function pointer intact, which is safe because the timer will be properly detached when it finishes running.

Multi-thread race condition vulnerability in the camera framework module. Impact: Successful exploitation of this vulnerability may affect availability.

Multi-thread race condition vulnerability in the network management module. Impact: Successful exploitation of this vulnerability may affect availability.

Multi-thread race condition vulnerability in the camera framework module. Impact: Successful exploitation of this vulnerability may affect availability.

Multi-thread race condition vulnerability in the camera framework module. Impact: Successful exploitation of this vulnerability may affect availability.

In the Linux kernel, the following vulnerability has been resolved: iommu/amd/pgtbl: Fix possible race while increase page table level The AMD IOMMU host page table implementation supports dynamic page table levels (up to 6 levels), starting with a 3-level configuration that expands based on IOVA address. The kernel maintains a root pointer and current page table level to enable proper page table walks in alloc_pte()/fetch_pte() operations. The IOMMU IOVA allocator initially starts with 32-bit address and onces its exhuasted it switches to 64-bit address (max address is determined based on IOMMU and device DMA capability). To support larger IOVA, AMD IOMMU driver increases page table level. But in unmap path (iommu_v1_unmap_pages()), fetch_pte() reads pgtable->[root/mode] without lock. So its possible that in exteme corner case, when increase_address_space() is updating pgtable->[root/mode], fetch_pte() reads wrong page table level (pgtable->mode). It does compare the value with level encoded in page table and returns NULL. This will result is iommu_unmap ops to fail and upper layer may retry/log WARN_ON. CPU 0 CPU 1 ------ ------ map pages unmap pages alloc_pte() -> increase_address_space() iommu_v1_unmap_pages() -> fetch_pte() pgtable->root = pte (new root value) READ pgtable->[mode/root] Reads new root, old mode Updates mode (pgtable->mode += 1) Since Page table level updates are infrequent and already synchronized with a spinlock, implement seqcount to enable lock-free read operations on the read path.

Race condition in the ec_device_ioctl_xcmd function in drivers/platform/chrome/cros_ec_dev.c in the Linux kernel before 4.7 allows local users to cause a denial of service (out-of-bounds array access) by changing a certain size value, aka a "double fetch" vulnerability.

Race condition vulnerability in the audio module. Impact: Successful exploitation of this vulnerability may affect function stability.

In the Linux kernel, the following vulnerability has been resolved: net: bridge: switchdev: Skip MDB replays of deferred events on offload Before this change, generation of the list of MDB events to replay would race against the creation of new group memberships, either from the IGMP/MLD snooping logic or from user configuration. While new memberships are immediately visible to walkers of br->mdb_list, the notification of their existence to switchdev event subscribers is deferred until a later point in time. So if a replay list was generated during a time that overlapped with such a window, it would also contain a replay of the not-yet-delivered event. The driver would thus receive two copies of what the bridge internally considered to be one single event. On destruction of the bridge, only a single membership deletion event was therefore sent. As a consequence of this, drivers which reference count memberships (at least DSA), would be left with orphan groups in their hardware database when the bridge was destroyed. This is only an issue when replaying additions. While deletion events may still be pending on the deferred queue, they will already have been removed from br->mdb_list, so no duplicates can be generated in that scenario. To a user this meant that old group memberships, from a bridge in which a port was previously attached, could be reanimated (in hardware) when the port joined a new bridge, without the new bridge's knowledge. For example, on an mv88e6xxx system, create a snooping bridge and immediately add a port to it: root@infix-06-0b-00:~$ ip link add dev br0 up type bridge mcast_snooping 1 && \ > ip link set dev x3 up master br0 And then destroy the bridge: root@infix-06-0b-00:~$ ip link del dev br0 root@infix-06-0b-00:~$ mvls atu ADDRESS FID STATE Q F 0 1 2 3 4 5 6 7 8 9 a DEV:0 Marvell 88E6393X 33:33:00:00:00:6a 1 static - - 0 . . . . . . . . . . 33:33:ff:87:e4:3f 1 static - - 0 . . . . . . . . . . ff:ff:ff:ff:ff:ff 1 static - - 0 1 2 3 4 5 6 7 8 9 a root@infix-06-0b-00:~$ The two IPv6 groups remain in the hardware database because the port (x3) is notified of the host's membership twice: once via the original event and once via a replay. Since only a single delete notification is sent, the count remains at 1 when the bridge is destroyed. Then add the same port (or another port belonging to the same hardware domain) to a new bridge, this time with snooping disabled: root@infix-06-0b-00:~$ ip link add dev br1 up type bridge mcast_snooping 0 && \ > ip link set dev x3 up master br1 All multicast, including the two IPv6 groups from br0, should now be flooded, according to the policy of br1. But instead the old memberships are still active in the hardware database, causing the switch to only forward traffic to those groups towards the CPU (port 0). Eliminate the race in two steps: 1. Grab the write-side lock of the MDB while generating the replay list. This prevents new memberships from showing up while we are generating the replay list. But it leaves the scenario in which a deferred event was already generated, but not delivered, before we grabbed the lock. Therefore: 2. Make sure that no deferred version of a replay event is already enqueued to the switchdev deferred queue, before adding it to the replay list, when replaying additions.

In the Linux kernel, the following vulnerability has been resolved: net: kcm: Fix race condition in kcm_unattach() syzbot found a race condition when kcm_unattach(psock) and kcm_release(kcm) are executed at the same time. kcm_unattach() is missing a check of the flag kcm->tx_stopped before calling queue_work(). If the kcm has a reserved psock, kcm_unattach() might get executed between cancel_work_sync() and unreserve_psock() in kcm_release(), requeuing kcm->tx_work right before kcm gets freed in kcm_done(). Remove kcm->tx_stopped and replace it by the less error-prone disable_work_sync().

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix recv-recv race of completed call If a call receives an event (such as incoming data), the call gets placed on the socket's queue and a thread in recvmsg can be awakened to go and process it. Once the thread has picked up the call off of the queue, further events will cause it to be requeued, and once the socket lock is dropped (recvmsg uses call->user_mutex to allow the socket to be used in parallel), a second thread can come in and its recvmsg can pop the call off the socket queue again. In such a case, the first thread will be receiving stuff from the call and the second thread will be blocked on call->user_mutex. The first thread can, at this point, process both the event that it picked call for and the event that the second thread picked the call for and may see the call terminate - in which case the call will be "released", decoupling the call from the user call ID assigned to it (RXRPC_USER_CALL_ID in the control message). The first thread will return okay, but then the second thread will wake up holding the user_mutex and, if it sees that the call has been released by the first thread, it will BUG thusly: kernel BUG at net/rxrpc/recvmsg.c:474! Fix this by just dequeuing the call and ignoring it if it is seen to be already released. We can't tell userspace about it anyway as the user call ID has become stale.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix Preauh_HashValue race condition If client send multiple session setup requests to ksmbd, Preauh_HashValue race condition could happen. There is no need to free sess->Preauh_HashValue at session setup phase. It can be freed together with session at connection termination phase.

In the Linux kernel, the following vulnerability has been resolved: xfrm: state: initialize state_ptrs earlier in xfrm_state_find In case of preemption, xfrm_state_look_at will find a different pcpu_id and look up states for that other CPU. If we matched a state for CPU2 in the state_cache while the lookup started on CPU1, we will jump to "found", but the "best" state that we got will be ignored and we will enter the "acquire" block. This block uses state_ptrs, which isn't initialized at this point. Let's initialize state_ptrs just after taking rcu_read_lock. This will also prevent a possible misuse in the future, if someone adjusts this function.

In the Linux kernel, the following vulnerability has been resolved: comedi: fix race between polling and detaching syzbot reports a use-after-free in comedi in the below link, which is due to comedi gladly removing the allocated async area even though poll requests are still active on the wait_queue_head inside of it. This can cause a use-after-free when the poll entries are later triggered or removed, as the memory for the wait_queue_head has been freed. We need to check there are no tasks queued on any of the subdevices' wait queues before allowing the device to be detached by the `COMEDI_DEVCONFIG` ioctl. Tasks will read-lock `dev->attach_lock` before adding themselves to the subdevice wait queue, so fix the problem in the `COMEDI_DEVCONFIG` ioctl handler by write-locking `dev->attach_lock` before checking that all of the subdevices are safe to be deleted. This includes testing for any sleepers on the subdevices' wait queues. It remains locked until the device has been detached. This requires the `comedi_device_detach()` function to be refactored slightly, moving the bulk of it into new function `comedi_device_detach_locked()`. Note that the refactor of `comedi_device_detach()` results in `comedi_device_cancel_all()` now being called while `dev->attach_lock` is write-locked, which wasn't the case previously, but that does not matter. Thanks to Jens Axboe for diagnosing the problem and co-developing this patch.

In the Linux kernel, the following vulnerability has been resolved: ceph: fix race condition validating r_parent before applying state Add validation to ensure the cached parent directory inode matches the directory info in MDS replies. This prevents client-side race conditions where concurrent operations (e.g. rename) cause r_parent to become stale between request initiation and reply processing, which could lead to applying state changes to incorrect directory inodes. [ idryomov: folded a kerneldoc fixup and a follow-up fix from Alex to move CEPH_CAP_PIN reference when r_parent is updated: When the parent directory lock is not held, req->r_parent can become stale and is updated to point to the correct inode. However, the associated CEPH_CAP_PIN reference was not being adjusted. The CEPH_CAP_PIN is a reference on an inode that is tracked for accounting purposes. Moving this pin is important to keep the accounting balanced. When the pin was not moved from the old parent to the new one, it created two problems: The reference on the old, stale parent was never released, causing a reference leak. A reference for the new parent was never acquired, creating the risk of a reference underflow later in ceph_mdsc_release_request(). This patch corrects the logic by releasing the pin from the old parent and acquiring it for the new parent when r_parent is switched. This ensures reference accounting stays balanced. ]

In the Linux kernel, the following vulnerability has been resolved: NFS: Fix a race when updating an existing write After nfs_lock_and_join_requests() tests for whether the request is still attached to the mapping, nothing prevents a call to nfs_inode_remove_request() from succeeding until we actually lock the page group. The reason is that whoever called nfs_inode_remove_request() doesn't necessarily have a lock on the page group head. So in order to avoid races, let's take the page group lock earlier in nfs_lock_and_join_requests(), and hold it across the removal of the request in nfs_inode_remove_request().

In the Linux kernel, the following vulnerability has been resolved: mm/ptdump: take the memory hotplug lock inside ptdump_walk_pgd() Memory hot remove unmaps and tears down various kernel page table regions as required. The ptdump code can race with concurrent modifications of the kernel page tables. When leaf entries are modified concurrently, the dump code may log stale or inconsistent information for a VA range, but this is otherwise not harmful. But when intermediate levels of kernel page table are freed, the dump code will continue to use memory that has been freed and potentially reallocated for another purpose. In such cases, the ptdump code may dereference bogus addresses, leading to a number of potential problems. To avoid the above mentioned race condition, platforms such as arm64, riscv and s390 take memory hotplug lock, while dumping kernel page table via the sysfs interface /sys/kernel/debug/kernel_page_tables. Similar race condition exists while checking for pages that might have been marked W+X via /sys/kernel/debug/kernel_page_tables/check_wx_pages which in turn calls ptdump_check_wx(). Instead of solving this race condition again, let's just move the memory hotplug lock inside generic ptdump_check_wx() which will benefit both the scenarios. Drop get_online_mems() and put_online_mems() combination from all existing platform ptdump code paths.

In the Linux kernel, the following vulnerability has been resolved: nfsd: avoid ref leak in nfsd_open_local_fh() If two calls to nfsd_open_local_fh() race and both successfully call nfsd_file_acquire_local(), they will both get an extra reference to the net to accompany the file reference stored in *pnf. One of them will fail to store (using xchg()) the file reference in *pnf and will drop that reference but WON'T drop the accompanying reference to the net. This leak means that when the nfs server is shut down it will hang in nfsd_shutdown_net() waiting for &nn->nfsd_net_free_done. This patch adds the missing nfsd_net_put().

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix race between cache write completion and ALL_QUEUED being set When netfslib is issuing subrequests, the subrequests start processing immediately and may complete before we reach the end of the issuing function. At the end of the issuing function we set NETFS_RREQ_ALL_QUEUED to indicate to the collector that we aren't going to issue any more subreqs and that it can do the final notifications and cleanup. Now, this isn't a problem if the request is synchronous (NETFS_RREQ_OFFLOAD_COLLECTION is unset) as the result collection will be done in-thread and we're guaranteed an opportunity to run the collector. However, if the request is asynchronous, collection is primarily triggered by the termination of subrequests queuing it on a workqueue. Now, a race can occur here if the app thread sets ALL_QUEUED after the last subrequest terminates. This can happen most easily with the copy2cache code (as used by Ceph) where, in the collection routine of a read request, an asynchronous write request is spawned to copy data to the cache. Folios are added to the write request as they're unlocked, but there may be a delay before ALL_QUEUED is set as the write subrequests may complete before we get there. If all the write subreqs have finished by the ALL_QUEUED point, no further events happen and the collection never happens, leaving the request hanging. Fix this by queuing the collector after setting ALL_QUEUED. This is a bit heavy-handed and it may be sufficient to do it only if there are no extant subreqs. Also add a tracepoint to cross-reference both requests in a copy-to-request operation and add a trace to the netfs_rreq tracepoint to indicate the setting of ALL_QUEUED.

In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_qfq: Fix race condition on qfq_aggregate A race condition can occur when 'agg' is modified in qfq_change_agg (called during qfq_enqueue) while other threads access it concurrently. For example, qfq_dump_class may trigger a NULL dereference, and qfq_delete_class may cause a use-after-free. This patch addresses the issue by: 1. Moved qfq_destroy_class into the critical section. 2. Added sch_tree_lock protection to qfq_dump_class and qfq_dump_class_stats.

In the Linux kernel, the following vulnerability has been resolved: net_sched: prio: fix a race in prio_tune() Gerrard Tai reported a race condition in PRIO, whenever SFQ perturb timer fires at the wrong time. The race is as follows: CPU 0 CPU 1 [1]: lock root [2]: qdisc_tree_flush_backlog() [3]: unlock root | | [5]: lock root | [6]: rehash | [7]: qdisc_tree_reduce_backlog() | [4]: qdisc_put() This can be abused to underflow a parent's qlen. Calling qdisc_purge_queue() instead of qdisc_tree_flush_backlog() should fix the race, because all packets will be purged from the qdisc before releasing the lock.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix a race between renames and directory logging We have a race between a rename and directory inode logging that if it happens and we crash/power fail before the rename completes, the next time the filesystem is mounted, the log replay code will end up deleting the file that was being renamed. This is best explained following a step by step analysis of an interleaving of steps that lead into this situation. Consider the initial conditions: 1) We are at transaction N; 2) We have directories A and B created in a past transaction (< N); 3) We have inode X corresponding to a file that has 2 hardlinks, one in directory A and the other in directory B, so we'll name them as "A/foo_link1" and "B/foo_link2". Both hard links were persisted in a past transaction (< N); 4) We have inode Y corresponding to a file that as a single hard link and is located in directory A, we'll name it as "A/bar". This file was also persisted in a past transaction (< N). The steps leading to a file loss are the following and for all of them we are under transaction N: 1) Link "A/foo_link1" is removed, so inode's X last_unlink_trans field is updated to N, through btrfs_unlink() -> btrfs_record_unlink_dir(); 2) Task A starts a rename for inode Y, with the goal of renaming from "A/bar" to "A/baz", so we enter btrfs_rename(); 3) Task A inserts the new BTRFS_INODE_REF_KEY for inode Y by calling btrfs_insert_inode_ref(); 4) Because the rename happens in the same directory, we don't set the last_unlink_trans field of directoty A's inode to the current transaction id, that is, we don't cal btrfs_record_unlink_dir(); 5) Task A then removes the entries from directory A (BTRFS_DIR_ITEM_KEY and BTRFS_DIR_INDEX_KEY items) when calling __btrfs_unlink_inode() (actually the dir index item is added as a delayed item, but the effect is the same); 6) Now before task A adds the new entry "A/baz" to directory A by calling btrfs_add_link(), another task, task B is logging inode X; 7) Task B starts a fsync of inode X and after logging inode X, at btrfs_log_inode_parent() it calls btrfs_log_all_parents(), since inode X has a last_unlink_trans value of N, set at in step 1; 8) At btrfs_log_all_parents() we search for all parent directories of inode X using the commit root, so we find directories A and B and log them. Bu when logging direct A, we don't have a dir index item for inode Y anymore, neither the old name "A/bar" nor for the new name "A/baz" since the rename has deleted the old name but has not yet inserted the new name - task A hasn't called yet btrfs_add_link() to do that. Note that logging directory A doesn't fallback to a transaction commit because its last_unlink_trans has a lower value than the current transaction's id (see step 4); 9) Task B finishes logging directories A and B and gets back to btrfs_sync_file() where it calls btrfs_sync_log() to persist the log tree; 10) Task B successfully persisted the log tree, btrfs_sync_log() completed with success, and a power failure happened. We have a log tree without any directory entry for inode Y, so the log replay code deletes the entry for inode Y, name "A/bar", from the subvolume tree since it doesn't exist in the log tree and the log tree is authorative for its index (we logged a BTRFS_DIR_LOG_INDEX_KEY item that covers the index range for the dentry that corresponds to "A/bar"). Since there's no other hard link for inode Y and the log replay code deletes the name "A/bar", the file is lost. The issue wouldn't happen if task B synced the log only after task A called btrfs_log_new_name(), which would update the log with the new name for inode Y ("A/bar"). Fix this by pinning the log root during renames before removing the old directory entry, and unpinning af ---truncated---

In the Linux kernel, the following vulnerability has been resolved: fs/fhandle.c: fix a race in call of has_locked_children() may_decode_fh() is calling has_locked_children() while holding no locks. That's an oopsable race... The rest of the callers are safe since they are holding namespace_sem and are guaranteed a positive refcount on the mount in question. Rename the current has_locked_children() to __has_locked_children(), make it static and switch the fs/namespace.c users to it. Make has_locked_children() a wrapper for __has_locked_children(), calling the latter under read_seqlock_excl(&mount_lock).

In the Linux kernel, the following vulnerability has been resolved: virtio_ring: Fix data race by tagging event_triggered as racy for KCSAN syzbot reports a data-race when accessing the event_triggered, here is the simplified stack when the issue occurred: ================================================================== BUG: KCSAN: data-race in virtqueue_disable_cb / virtqueue_enable_cb_delayed write to 0xffff8881025bc452 of 1 bytes by task 3288 on cpu 0: virtqueue_enable_cb_delayed+0x42/0x3c0 drivers/virtio/virtio_ring.c:2653 start_xmit+0x230/0x1310 drivers/net/virtio_net.c:3264 __netdev_start_xmit include/linux/netdevice.h:5151 [inline] netdev_start_xmit include/linux/netdevice.h:5160 [inline] xmit_one net/core/dev.c:3800 [inline] read to 0xffff8881025bc452 of 1 bytes by interrupt on cpu 1: virtqueue_disable_cb_split drivers/virtio/virtio_ring.c:880 [inline] virtqueue_disable_cb+0x92/0x180 drivers/virtio/virtio_ring.c:2566 skb_xmit_done+0x5f/0x140 drivers/net/virtio_net.c:777 vring_interrupt+0x161/0x190 drivers/virtio/virtio_ring.c:2715 __handle_irq_event_percpu+0x95/0x490 kernel/irq/handle.c:158 handle_irq_event_percpu kernel/irq/handle.c:193 [inline] value changed: 0x01 -> 0x00 ================================================================== When the data race occurs, the function virtqueue_enable_cb_delayed() sets event_triggered to false, and virtqueue_disable_cb_split/packed() reads it as false due to the race condition. Since event_triggered is an unreliable hint used for optimization, this should only cause the driver temporarily suggest that the device not send an interrupt notification when the event index is used. Fix this KCSAN reported data-race issue by explicitly tagging the access as data_racy.

In the Linux kernel, the following vulnerability has been resolved: skbuff: Fix a race between coalescing and releasing SKBs Commit 1effe8ca4e34 ("skbuff: fix coalescing for page_pool fragment recycling") allowed coalescing to proceed with non page pool page and page pool page when @from is cloned, i.e. to->pp_recycle --> false from->pp_recycle --> true skb_cloned(from) --> true However, it actually requires skb_cloned(@from) to hold true until coalescing finishes in this situation. If the other cloned SKB is released while the merging is in process, from_shinfo->nr_frags will be set to 0 toward the end of the function, causing the increment of frag page _refcount to be unexpectedly skipped resulting in inconsistent reference counts. Later when SKB(@to) is released, it frees the page directly even though the page pool page is still in use, leading to use-after-free or double-free errors. So it should be prohibited. The double-free error message below prompted us to investigate: BUG: Bad page state in process swapper/1 pfn:0e0d1 page:00000000c6548b28 refcount:-1 mapcount:0 mapping:0000000000000000 index:0x2 pfn:0xe0d1 flags: 0xfffffc0000000(node=0|zone=1|lastcpupid=0x1fffff) raw: 000fffffc0000000 0000000000000000 ffffffff00000101 0000000000000000 raw: 0000000000000002 0000000000000000 ffffffffffffffff 0000000000000000 page dumped because: nonzero _refcount CPU: 1 PID: 0 Comm: swapper/1 Tainted: G E 6.2.0+ Call Trace: <IRQ> dump_stack_lvl+0x32/0x50 bad_page+0x69/0xf0 free_pcp_prepare+0x260/0x2f0 free_unref_page+0x20/0x1c0 skb_release_data+0x10b/0x1a0 napi_consume_skb+0x56/0x150 net_rx_action+0xf0/0x350 ? __napi_schedule+0x79/0x90 __do_softirq+0xc8/0x2b1 __irq_exit_rcu+0xb9/0xf0 common_interrupt+0x82/0xa0 </IRQ> <TASK> asm_common_interrupt+0x22/0x40 RIP: 0010:default_idle+0xb/0x20

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix block group refcount race in btrfs_create_pending_block_groups() Block group creation is done in two phases, which results in a slightly unintuitive property: a block group can be allocated/deallocated from after btrfs_make_block_group() adds it to the space_info with btrfs_add_bg_to_space_info(), but before creation is completely completed in btrfs_create_pending_block_groups(). As a result, it is possible for a block group to go unused and have 'btrfs_mark_bg_unused' called on it concurrently with 'btrfs_create_pending_block_groups'. This causes a number of issues, which were fixed with the block group flag 'BLOCK_GROUP_FLAG_NEW'. However, this fix is not quite complete. Since it does not use the unused_bg_lock, it is possible for the following race to occur: btrfs_create_pending_block_groups btrfs_mark_bg_unused if list_empty // false list_del_init clear_bit else if (test_bit) // true list_move_tail And we get into the exact same broken ref count and invalid new_bgs state for transaction cleanup that BLOCK_GROUP_FLAG_NEW was designed to prevent. The broken refcount aspect will result in a warning like: [1272.943527] refcount_t: underflow; use-after-free. [1272.943967] WARNING: CPU: 1 PID: 61 at lib/refcount.c:28 refcount_warn_saturate+0xba/0x110 [1272.944731] Modules linked in: btrfs virtio_net xor zstd_compress raid6_pq null_blk [last unloaded: btrfs] [1272.945550] CPU: 1 UID: 0 PID: 61 Comm: kworker/u32:1 Kdump: loaded Tainted: G W 6.14.0-rc5+ #108 [1272.946368] Tainted: [W]=WARN [1272.946585] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 [1272.947273] Workqueue: btrfs_discard btrfs_discard_workfn [btrfs] [1272.947788] RIP: 0010:refcount_warn_saturate+0xba/0x110 [1272.949532] RSP: 0018:ffffbf1200247df0 EFLAGS: 00010282 [1272.949901] RAX: 0000000000000000 RBX: ffffa14b00e3f800 RCX: 0000000000000000 [1272.950437] RDX: 0000000000000000 RSI: ffffbf1200247c78 RDI: 00000000ffffdfff [1272.950986] RBP: ffffa14b00dc2860 R08: 00000000ffffdfff R09: ffffffff90526268 [1272.951512] R10: ffffffff904762c0 R11: 0000000063666572 R12: ffffa14b00dc28c0 [1272.952024] R13: 0000000000000000 R14: ffffa14b00dc2868 R15: 000001285dcd12c0 [1272.952850] FS: 0000000000000000(0000) GS:ffffa14d33c40000(0000) knlGS:0000000000000000 [1272.953458] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1272.953931] CR2: 00007f838cbda000 CR3: 000000010104e000 CR4: 00000000000006f0 [1272.954474] Call Trace: [1272.954655] <TASK> [1272.954812] ? refcount_warn_saturate+0xba/0x110 [1272.955173] ? __warn.cold+0x93/0xd7 [1272.955487] ? refcount_warn_saturate+0xba/0x110 [1272.955816] ? report_bug+0xe7/0x120 [1272.956103] ? handle_bug+0x53/0x90 [1272.956424] ? exc_invalid_op+0x13/0x60 [1272.956700] ? asm_exc_invalid_op+0x16/0x20 [1272.957011] ? refcount_warn_saturate+0xba/0x110 [1272.957399] btrfs_discard_cancel_work.cold+0x26/0x2b [btrfs] [1272.957853] btrfs_put_block_group.cold+0x5d/0x8e [btrfs] [1272.958289] btrfs_discard_workfn+0x194/0x380 [btrfs] [1272.958729] process_one_work+0x130/0x290 [1272.959026] worker_thread+0x2ea/0x420 [1272.959335] ? __pfx_worker_thread+0x10/0x10 [1272.959644] kthread+0xd7/0x1c0 [1272.959872] ? __pfx_kthread+0x10/0x10 [1272.960172] ret_from_fork+0x30/0x50 [1272.960474] ? __pfx_kthread+0x10/0x10 [1272.960745] ret_from_fork_asm+0x1a/0x30 [1272.961035] </TASK> [1272.961238] ---[ end trace 0000000000000000 ]--- Though we have seen them in the async discard workfn as well. It is most likely to happen after a relocation finishes which cancels discard, tears down the block group, etc. Fix this fully by taking the lock arou ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix type confusion via race condition when using ipc_msg_send_request req->handle is allocated using ksmbd_acquire_id(&ipc_ida), based on ida_alloc. req->handle from ksmbd_ipc_login_request and FSCTL_PIPE_TRANSCEIVE ioctl can be same and it could lead to type confusion between messages, resulting in access to unexpected parts of memory after an incorrect delivery. ksmbd check type of ipc response but missing add continue to check next ipc reponse.

A flaw was found in pfn_swap_entry_to_page in memory management subsystem in the Linux Kernel. In this flaw, an attacker with a local user privilege may cause a denial of service problem due to a BUG statement referencing pmd_t x.

In the Linux kernel, the following vulnerability has been resolved: sysctl: Fix data-races in proc_dou8vec_minmax(). A sysctl variable is accessed concurrently, and there is always a chance of data-race. So, all readers and writers need some basic protection to avoid load/store-tearing. This patch changes proc_dou8vec_minmax() to use READ_ONCE() and WRITE_ONCE() internally to fix data-races on the sysctl side. For now, proc_dou8vec_minmax() itself is tolerant to a data-race, but we still need to add annotations on the other subsystem's side.

In the Linux kernel, the following vulnerability has been resolved: media: streamzap: fix race between device disconnection and urb callback Syzkaller has reported a general protection fault at function ir_raw_event_store_with_filter(). This crash is caused by a NULL pointer dereference of dev->raw pointer, even though it is checked for NULL in the same function, which means there is a race condition. It occurs due to the incorrect order of actions in the streamzap_disconnect() function: rc_unregister_device() is called before usb_kill_urb(). The dev->raw pointer is freed and set to NULL in rc_unregister_device(), and only after that usb_kill_urb() waits for in-progress requests to finish. If rc_unregister_device() is called while streamzap_callback() handler is not finished, this can lead to accessing freed resources. Thus rc_unregister_device() should be called after usb_kill_urb(). Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

In the Linux kernel, the following vulnerability has been resolved: perf/core: Order the PMU list to fix warning about unordered pmu_ctx_list Syskaller triggers a warning due to prev_epc->pmu != next_epc->pmu in perf_event_swap_task_ctx_data(). vmcore shows that two lists have the same perf_event_pmu_context, but not in the same order. The problem is that the order of pmu_ctx_list for the parent is impacted by the time when an event/PMU is added. While the order for a child is impacted by the event order in the pinned_groups and flexible_groups. So the order of pmu_ctx_list in the parent and child may be different. To fix this problem, insert the perf_event_pmu_context to its proper place after iteration of the pmu_ctx_list. The follow testcase can trigger above warning: # perf record -e cycles --call-graph lbr -- taskset -c 3 ./a.out & # perf stat -e cpu-clock,cs -p xxx // xxx is the pid of a.out test.c void main() { int count = 0; pid_t pid; printf("%d running\n", getpid()); sleep(30); printf("running\n"); pid = fork(); if (pid == -1) { printf("fork error\n"); return; } if (pid == 0) { while (1) { count++; } } else { while (1) { count++; } } } The testcase first opens an LBR event, so it will allocate task_ctx_data, and then open tracepoint and software events, so the parent context will have 3 different perf_event_pmu_contexts. On inheritance, child ctx will insert the perf_event_pmu_context in another order and the warning will trigger. [ mingo: Tidied up the changelog. ]

In the Linux kernel, the following vulnerability has been resolved: nexthop: Fix data-races around nexthop_compat_mode. While reading nexthop_compat_mode, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers.

In the Linux kernel, the following vulnerability has been resolved: net: hns3: don't auto enable misc vector Currently, there is a time window between misc irq enabled and service task inited. If an interrupte is reported at this time, it will cause warning like below: [ 16.324639] Call trace: [ 16.324641] __queue_delayed_work+0xb8/0xe0 [ 16.324643] mod_delayed_work_on+0x78/0xd0 [ 16.324655] hclge_errhand_task_schedule+0x58/0x90 [hclge] [ 16.324662] hclge_misc_irq_handle+0x168/0x240 [hclge] [ 16.324666] __handle_irq_event_percpu+0x64/0x1e0 [ 16.324667] handle_irq_event+0x80/0x170 [ 16.324670] handle_fasteoi_edge_irq+0x110/0x2bc [ 16.324671] __handle_domain_irq+0x84/0xfc [ 16.324673] gic_handle_irq+0x88/0x2c0 [ 16.324674] el1_irq+0xb8/0x140 [ 16.324677] arch_cpu_idle+0x18/0x40 [ 16.324679] default_idle_call+0x5c/0x1bc [ 16.324682] cpuidle_idle_call+0x18c/0x1c4 [ 16.324684] do_idle+0x174/0x17c [ 16.324685] cpu_startup_entry+0x30/0x6c [ 16.324687] secondary_start_kernel+0x1a4/0x280 [ 16.324688] ---[ end trace 6aa0bff672a964aa ]--- So don't auto enable misc vector when request irq..