Jsish v3.5.0 was discovered to contain a heap buffer overflow via jsiEvalCodeSub in src/jsiEval.c. This vulnerability can lead to a Denial of Service (DoS).

libmysofa before 2019-11-24 does not properly restrict recursive function calls, as demonstrated by reports of stack consumption in readOHDRHeaderMessageDatatype in dataobject.c and directblockRead in fractalhead.c. NOTE: a download of v0.9 after 2019-12-06 should fully remediate this issue.

Media Gateway Control Protocol (MGCP) in Huawei DP300 V500R002C00; RP200 V500R002C00SPC200; V600R006C00; TE30 V100R001C10; V500R002C00; V600R006C00; TE40 V500R002C00; V600R006C00; TE50 V500R002C00; V600R006C00; TE60 V100R001C10; V500R002C00; V600R006C00 has an out-of-bounds write vulnerability. An unauthenticated, remote attacker crafts malformed packets with specific parameter to the affected products. Due to insufficient validation of packets, successful exploitation may impact availability of product service.

read_textobject in read.c in Xfig fig2dev 3.2.7b has a stack-based buffer overflow because of an incorrect sscanf.

IKEv2 in Huawei IPS Module V500R001C00, V500R001C00SPC200, V500R001C00SPC300, V500R001C00SPC500, V500R001C00SPH303, V500R001C00SPH508, V500R001C20, V500R001C20SPC100, V500R001C20SPC100PWE, V500R001C20SPC200, V500R001C20SPC200B062, V500R001C20SPC200PWE, V500R001C20SPC300B078, V500R001C20SPC300PWE, NGFW Module V500R001C00, V500R001C00SPC200, V500R001C00SPC300, V500R001C00SPC500, V500R001C00SPC500PWE, V500R001C00SPH303, V500R001C00SPH508, V500R001C20, V500R001C20SPC100, V500R001C20SPC100PWE, V500R001C20SPC200, V500R001C20SPC200B062, V500R001C20SPC200PWE, V500R001C20SPC300B078, V500R001C20SPC300PWE, NIP6300 V500R001C00, V500R001C00SPC200, V500R001C00SPC300, V500R001C00SPC500, V500R001C00SPH303, V500R001C00SPH508, V500R001C20, V500R001C20SPC100, V500R001C20SPC100PWE, V500R001C20SPC200, V500R001C20SPC200B062, V500R001C20SPC200PWE, V500R001C20SPC300B078, V500R001C20SPC300PWE, NIP6600 V500R001C00, V500R001C00SPC200, V500R001C00SPC300, V500R001C00SPC500, V500R001C00SPH303, V500R001C00SPH508, V500R001C20, V500R001C20SPC100, V500R001C20SPC100PWE, V500R001C20SPC200, V500R001C20SPC200B062, V500R001C20SPC200PWE, V500R001C20SPC300B078, Secospace USG6300 V500R001C00, V500R001C00SPC200, V500R001C00SPC300, V500R001C00SPC500, V500R001C00SPC500PWE, V500R001C00SPH303, V500R001C00SPH508, V500R001C20, V500R001C20SPC100, V500R001C20SPC100PWE, V500R001C20SPC101, V500R001C20SPC200, V500R001C20SPC200B062, V500R001C20SPC200PWE, V500R001C20SPC300B078, V500R001C20SPC300PWE, Secospace USG6500 V500R001C00, V500R001C00SPC200, V500R001C00SPC300, V500R001C00SPC500, V500R001C00SPC500PWE, V500R001C00SPH303, V500R001C00SPH508, V500R001C20, V500R001C20SPC100, V500R001C20SPC100PWE, V500R001C20SPC101, V500R001C20SPC200, V500R001C20SPC200B062, V500R001C20SPC200PWE, V500R001C20SPC300B078, V500R001C20SPC300PWE, Secospace USG6600 V500R001C00, V500R001C00SPC100, V500R001C00SPC200, V500R001C00SPC300, V500R001C00SPC301, V500R001C00SPC500, V500R001C00SPC500PWE, V500R001C00SPH303, V500R001C20, V500R001C20SPC100, V500R001C20SPC100PWE, V500R001C20SPC101, V500R001C20SPC200, V500R001C20SPC200PWE, V500R001C20SPC300, V500R001C20SPC300B078, V500R001C20SPC300PWE, USG9500 V500R001C00, V500R001C00SPC200, V500R001C00SPC300, V500R001C00SPC303, V500R001C00SPC500, V500R001C00SPC500PWE, V500R001C00SPH303, V500R001C00SPH508, V500R001C20, V500R001C20SPC100, V500R001C20SPC100PWE, V500R001C20SPC101, V500R001C20SPC200, V500R001C20SPC200B062, V500R001C20SPC200PWE, V500R001C20SPC300B078, V500R001C20SPC300PWE has an out-of-bounds write vulnerability due to insufficient input validation. An attacker could exploit it to craft special packets to trigger out-of-bounds memory write, which may further lead to system exceptions.

Liblouis 3.21.0 has an out-of-bounds write in compileRule in compileTranslationTable.c, as demonstrated by lou_trace.

GPAC mp4box 1.1.0-DEV-rev1727-g8be34973d-master has a stack-overflow vulnerability in function gf_isom_get_sample_for_movie_time of mp4box.

GoPro GPMF-parser 1.2.2 has an out-of-bounds write in OpenMP4Source in demo/GPMF_mp4reader.c.

xpdf 4.03 has heap buffer overflow in the function readXRefTable located in XRef.cc. An attacker can exploit this bug to cause a Denial of Service (Segmentation fault) or other unspecified effects by sending a crafted PDF file to the pdftoppm binary.

rtl_433 21.12 was discovered to contain a stack overflow in the function acurite_00275rm_decode at /devices/acurite.c. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted file.

GPAC mp4box 1.1.0-DEV-rev1759-geb2d1e6dd-has a heap-buffer-overflow vulnerability in function gf_isom_apple_enum_tag.

rtl_433 21.12 was discovered to contain a stack overflow in the function somfy_iohc_decode(). This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted file.

iText v7.1.17 was discovered to contain a stack-based buffer overflow via the component ByteBuffer.append, which allows attackers to cause a Denial of Service (DoS) via a crafted PDF file.

Cap'n Proto is a data interchange format and capability-based RPC system. In versions 1.0 and 1.0.1, when using the KJ HTTP library with WebSocket compression enabled, a buffer underrun can be caused by a remote peer. The underrun always writes a constant value that is not attacker-controlled, likely resulting in a crash, enabling a remote denial-of-service attack. Most Cap'n Proto and KJ users are unlikely to have this functionality enabled and so unlikely to be affected. Maintainers suspect only the Cloudflare Workers Runtime is affected. If KJ HTTP is used with WebSocket compression enabled, a malicious peer may be able to cause a buffer underrun on a heap-allocated buffer. KJ HTTP is an optional library bundled with Cap'n Proto, but is not directly used by Cap'n Proto. WebSocket compression is disabled by default. It must be enabled via a setting passed to the KJ HTTP library via `HttpClientSettings` or `HttpServerSettings`. The bytes written out-of-bounds are always a specific constant 4-byte string `{ 0x00, 0x00, 0xFF, 0xFF }`. Because this string is not controlled by the attacker, maintainers believe it is unlikely that remote code execution is possible. However, it cannot be ruled out. This functionality first appeared in Cap'n Proto 1.0. Previous versions are not affected. This issue is fixed in Cap'n Proto 1.0.1.1.

A flaw was found in Unzip. The vulnerability occurs during the conversion of a wide string to a local string that leads to a heap of out-of-bound write. This flaw allows an attacker to input a specially crafted zip file, leading to a crash or code execution.

Heap-based Buffer Overflow in GitHub repository vim/vim prior to 8.2.4436.

A vulnerability classified as critical has been found in tildearrow Furnace dev73. This affects the FUR to VGM converter in console mode which causes stack-based overflows and crashes. It is possible to initiate the attack remotely but it requires user-interaction. A POC has been disclosed to the public and may be used.

OpenCV (Open Source Computer Vision Library) 3.3 has an out-of-bounds write error in the function FillColorRow1 in utils.cpp when reading an image file by using cv::imread. NOTE: this vulnerability exists because of an incomplete fix for CVE-2017-12597.

Open Asset Import Library (aka assimp) 5.1.0 and 5.1.1 has a heap-based buffer overflow in _m3d_safestr (called from m3d_load and Assimp::M3DWrapper::M3DWrapper).

wolfSSL wolfMQTT 1.9 has a heap-based buffer overflow in MqttClient_DecodePacket (called from MqttClient_WaitType and MqttClient_Connect).

wolfSSL wolfMQTT 1.9 has a heap-based buffer overflow (4 bytes) in MqttDecode_Publish (called from MqttClient_DecodePacket and MqttClient_HandlePacket).

wolfSSL wolfMQTT 1.9 has a heap-based buffer overflow in MqttDecode_Disconnect (called from MqttClient_DecodePacket and MqttClient_WaitType).

Spin v6.5.1 was discovered to contain an out-of-bounds write in lex() at spinlex.c.

Grok 9.5.0 has a heap-based buffer overflow in openhtj2k::T1OpenHTJ2K::decompress (called from std::__1::__packaged_task_func<std::__1::__bind<grk::T1DecompressScheduler::deco and std::__1::packaged_task<int).

Heap-based buffer overflow in enhance.c in ImageMagick before 7.0.6-6 allows remote attackers to cause a denial of service via a crafted file.

GDAL 3.3.0 through 3.4.0 has a heap-based buffer overflow in PCIDSK::CPCIDSKFile::ReadFromFile (called from PCIDSK::CPCIDSKSegment::ReadFromFile and PCIDSK::CPCIDSKBinarySegment::CPCIDSKBinarySegment).

A heap-based buffer overflow vulnerability exists in HDF5 1.13.1-1 via H5F_addr_decode_len in /hdf5/src/H5Fint.c, which could cause a Denial of Service.

HarfBuzz 2.9.0 has an out-of-bounds write in hb_bit_set_invertible_t::set (called from hb_sparseset_t<hb_bit_set_invertible_t>::set and hb_set_copy).

libbpf 0.6.0 and 0.6.1 has a heap-based buffer overflow (8 bytes) in __bpf_object__open (called from bpf_object__open_mem and bpf-object-fuzzer.c).

GPAC v1.1.0 was discovered to contain a stack overflow via the function gf_node_get_name () at scenegraph/base_scenegraph.c. This vulnerability can lead to a program crash, causing a Denial of Service (DoS).

UltraJSON (aka ujson) through 5.1.0 has a stack-based buffer overflow in Buffer_AppendIndentUnchecked (called from encode). Exploitation can, for example, use a large amount of indentation.

OpenEXR 3.1.x before 3.1.4 has a heap-based buffer overflow in Imf_3_1::LineCompositeTask::execute (called from IlmThread_3_1::NullThreadPoolProvider::addTask and IlmThread_3_1::ThreadPool::addGlobalTask). NOTE: db217f2 may be inapplicable.

wolfSSL wolfMQTT 1.9 has a heap-based buffer overflow in MqttClient_DecodePacket (called from MqttClient_WaitType and MqttClient_Subscribe).

A Stack-based Buffer Overflow Vulnerability exists in HDF5 1.13.1-1 via the H5D__create_chunk_file_map_hyper function in /hdf5/src/H5Dchunk.c, which causes a Denial of Service (context-dependent).

wolfSSL wolfMQTT 1.9 has a heap-based buffer overflow (8 bytes) in MqttDecode_Publish (called from MqttClient_DecodePacket and MqttClient_HandlePacket).

Jsish v3.5.0 was discovered to contain a heap buffer overflow via jsi_ArraySliceCmd in src/jsiArray.c. This vulnerability can lead to a Denial of Service (DoS).

The PPM reader in libjpeg-turbo through 2.0.90 mishandles use of tjLoadImage for loading a 16-bit binary PPM file into a grayscale buffer and loading a 16-bit binary PGM file into an RGB buffer. This is related to a heap-based buffer overflow in the get_word_rgb_row function in rdppm.c.

tsMuxer git-2678966 was discovered to contain a heap-based buffer overflow via the function HevcUnit::updateBits in hevc.cpp.

Jsish v3.5.0 was discovered to contain a heap buffer overflow via jsiClearStack in src/jsiEval.c. This vulnerability can lead to a Denial of Service (DoS).

Qt SVG in Qt 5.0.0 through 5.15.2 and 6.0.0 through 6.2.1 has an out-of-bounds write in QtPrivate::QCommonArrayOps<QPainterPath::Element>::growAppend (called from QPainterPath::addPath and QPathClipper::intersect).

Jsish v3.5.0 was discovered to contain a heap buffer overflow via RegExp_constructor in src/jsiRegexp.c. This vulnerability can lead to a Denial of Service (DoS).

The gig::Instrument::UpdateRegionKeyTable function in gig.cpp in libgig 4.0.0 allows remote attackers to cause a denial of service (invalid memory write and application crash) via a crafted gig file.

Ghostscript GhostPDL 9.50 through 9.54.0 has a heap-based buffer overflow in sampled_data_finish (called from sampled_data_continue and interp).

Wasm3 0.5.0 has an out-of-bounds write in CompileBlock (called from CompileElseBlock and Compile_If).

Wasm3 0.5.0 has an out-of-bounds write in CompileBlock (called from Compile_LoopOrBlock and CompileBlockStatements).

libbpf 0.6.0 and 0.6.1 has a heap-based buffer overflow (4 bytes) in __bpf_object__open (called from bpf_object__open_mem and bpf-object-fuzzer.c).

Jsish v3.5.0 was discovered to contain a heap buffer overflow via jsiValueObjDelete in src/jsiEval.c. This vulnerability can lead to a Denial of Service (DoS).

LibreDWG 0.12.4.4313 through 0.12.4.4367 has an out-of-bounds write in dwg_free_BLOCK_private (called from dwg_free_BLOCK and dwg_free_object).

Two Heap based buffer overflow vulnerabilities exist in ffjpeg through 01.01.2021. It is similar to CVE-2020-23852. Issues that are in the jfif_decode function at ffjpeg/src/jfif.c (line 552) could cause a Denial of Service by using a crafted jpeg file.

A stack overflow vulnerability exists in gpac 1.1.0 via the gf_bifs_dec_proto_list function, which causes a segmentation fault and application crash.