ELECOM LAN routers (WRC-1167GST2 firmware v1.25 and prior, WRC-1167GST2A firmware v1.25 and prior, WRC-1167GST2H firmware v1.25 and prior, WRC-2533GS2-B firmware v1.52 and prior, WRC-2533GS2-W firmware v1.52 and prior, WRC-1750GS firmware v1.03 and prior, WRC-1750GSV firmware v2.11 and prior, WRC-1900GST firmware v1.03 and prior, WRC-2533GST firmware v1.03 and prior, WRC-2533GSTA firmware v1.03 and prior, WRC-2533GST2 firmware v1.25 and prior, WRC-2533GST2SP firmware v1.25 and prior, WRC-2533GST2-G firmware v1.25 and prior, and EDWRC-2533GST2 firmware v1.25 and prior) allows a network-adjacent authenticated attacker to execute an arbitrary OS command via unspecified vectors.

OS command injection vulnerability in ELECOM routers (WRC-1167GST2 firmware v1.25 and prior, WRC-1167GST2A firmware v1.25 and prior, WRC-1167GST2H firmware v1.25 and prior, WRC-2533GS2-B firmware v1.52 and prior, WRC-2533GS2-W firmware v1.52 and prior, WRC-1750GS firmware v1.03 and prior, WRC-1750GSV firmware v2.11 and prior, WRC-1900GST firmware v1.03 and prior, WRC-2533GST firmware v1.03 and prior, WRC-2533GSTA firmware v1.03 and prior, WRC-2533GST2 firmware v1.25 and prior, WRC-2533GST2SP firmware v1.25 and prior, WRC-2533GST2-G firmware v1.25 and prior, and EDWRC-2533GST2 firmware v1.25 and prior) allows a network-adjacent authenticated attackers to execute an arbitrary OS command with the root privilege via unspecified vectors.

NETGEAR RAX30 logCtrl Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR RAX30 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the logCtrl action. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-19825.

Adtran 834-5 11.1.0.101-202106231430, and fixed as of SmartOS Version 12.6.3.1, devices allow OS Command Injection via shell metacharacters to the Ping or Traceroute utility.

D-Link DIR-X3260 SetTriggerPPPoEValidate Username Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-X3260 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the prog.cgi program, which handles HNAP requests made to the lighttpd webserver listening on TCP ports 80 and 443. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21101.

OS command injection vulnerability in PIX-RT100 versions RT100_TEQ_2.1.1_EQ101 and RT100_TEQ_2.1.2_EQ101 allows a network-adjacent attacker who can access product settings to execute an arbitrary OS command.

EnGenius EWS356-FIR 1.1.30 and earlier devices allow a remote attacker to execute arbitrary OS commands via the Controller connectivity parameter.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1860 1.04B03_HOTFIX WiFi extenders. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the HNAP service, which listens on TCP port 80 by default. When parsing the SOAPAction header, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of the device. Was ZDI-CAN-10084.

Tenda AC15V1.0 V15.03.20_multi has a command injection vulnerability via the deviceName parameter.

TOTOLINK A3300R V17.0.0cu.557_B20221024 was discovered to contain an unauthenticated remote command execution (RCE) vulnerability via multiple parameters in the "setOpModeCfg" function. This security issue allows an attacker to take complete control of the device. In detail, exploitation allows unauthenticated, remote attackers to execute arbitrary system commands with administrative privileges (i.e., as user "root").

Netis WF2780 v2.1.40144 was discovered to contain a command injection vulnerability via the config_sequence parameter in other_para of cgitest.cgi.

A vulnerability has been identified in SINEC NMS (All versions < V2.0 SP1). The affected application incorrectly neutralizes special elements when creating a report which could lead to command injection.

Multiple TP-LINK products allow a network-adjacent authenticated attacker with access to the product from the LAN port or Wi-Fi to execute arbitrary OS commands.

D-Link Multiple Routers cli Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-1260 and DIR-2150 routers. Authentication is required to exploit this vulnerability. The specific flaw exists within the CLI service, which listens on TCP port 23. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. . Was ZDI-CAN-19946.

D-Link DIR-X3260 SetSysEmailSettings SMTPServerAddress Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-X3260 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within prog.cgi, which handles HNAP requests made to the lighttpd webserver listening on TCP ports 80 and 443. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21222.

D-Link DIR-X3260 SetSysEmailSettings EmailTo Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-X3260 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within prog.cgi, which handles HNAP requests made to the lighttpd webserver listening on TCP ports 80 and 443. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21158.

D-Link DIR-X3260 SetSysEmailSettings EmailFrom Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-X3260 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the prog.cgi program, which handles HNAP requests made to the lighttpd webserver listening on TCP ports 80 and 443. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21102.

The Buffalo WHR-1166DHP 1.60 and earlier, WSR-600DHP 1.60 and earlier, WHR-600D 1.60 and earlier, WHR-300HP2 1.60 and earlier, WMR-300 1.60 and earlier, WEX-300 1.60 and earlier, and BHR-4GRV2 1.04 and earlier routers allow remote authenticated users to execute arbitrary OS commands via unspecified vectors.

Deco M4 firmware versions prior to 'Deco M4(JP)_V2_1.5.8 Build 20230619' allows a network-adjacent authenticated attacker to execute arbitrary OS commands.

Multiple TP-LINK products allow a network-adjacent authenticated attacker to execute arbitrary OS commands. Affected products/versions are as follows: Archer AX50 firmware versions prior to 'Archer AX50(JP)_V1_230529', Archer A10 firmware versions prior to 'Archer A10(JP)_V2_230504', Archer AX10 firmware versions prior to 'Archer AX10(JP)_V1.2_230508', and Archer AX11000 firmware versions prior to 'Archer AX11000(JP)_V1_230523'.

Archer AX6000 firmware versions prior to 'Archer AX6000(JP)_V1_1.3.0 Build 20221208' allows a network-adjacent authenticated attacker to execute arbitrary OS commands.

TP-Link Omada ER605 Access Control Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of TP-Link Omada ER605. Authentication is required to exploit this vulnerability. The specific issue exists within the handling of the name field in the access control user interface. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-22227.

Archer C5400 firmware versions prior to 'Archer C5400(JP)_V2_230506' allows a network-adjacent authenticated attacker to execute arbitrary OS commands.

Archer C5 firmware all versions and Archer C7 firmware versions prior to 'Archer C7(JP)_V2_230602' allow a network-adjacent authenticated attacker to execute arbitrary OS commands. Note that Archer C5 is no longer supported, therefore the update for this product is not provided.

Archer C3150 firmware versions prior to 'Archer C3150(JP)_V2_230511' allows a network-adjacent authenticated attacker to execute arbitrary OS commands.

OS command injection vulnerability in ELECOM wireless LAN routers allows a network-adjacent authenticated attacker to execute an arbitrary OS command with a root privilege by sending a specially crafted request. Affected products and versions are as follows: WRC-1167GHBK-S v1.03 and earlier, WRC-1167GEBK-S v1.03 and earlier, WRC-1167FEBK-S v1.04 and earlier, WRC-1167GHBK3-A v1.24 and earlier, and WRC-1167FEBK-A v1.18 and earlier.

A vulnerability was found in kodbox 1.26. It has been declared as critical. This vulnerability affects the function Execute of the file webconsole.php.txt of the component WebConsole Plug-In. The manipulation leads to os command injection. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-233476. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

TRENDnet TEW-657BRM 1.00.1 has an authenticated remote OS command injection vulnerability in the setup.cgi binary, exploitable via the HTTP parameters "command", "todo", and "next_file," which allows an attacker to execute arbitrary commands with root privileges.

D-Link DIR-2150 SetSysEmailSettings AccountName Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-2150 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the SOAP API interface, which listens on TCP port 80 by default. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-20555.

D-Link DIR-2150 SetSysEmailSettings EmailFrom Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-2150 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the SOAP API interface, which listens on TCP port 80 by default. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-20556.

D-Link DIR-2150 SetSysEmailSettings EmailTo Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-2150 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the SOAP API interface, which listens on TCP port 80 by default. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-20559.

D-Link DIR-2150 SetNTPServerSettings Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-2150 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the SOAP API interface, which listens on TCP port 80 by default. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-20553.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability, which was classified as critical, has been found in Uniview ISC 2500-S up to 20210930. Affected by this issue is the function setNatConfig of the file /Interface/DevManage/VM.php. The manipulation of the argument natAddress/natPort/natServerPort leads to os command injection. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-251696. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.

On the Alcatel-Lucent Enterprise (ALE) 8008 Cloud Edition Deskphone VoIP phone with firmware 1.50.13, a command injection (missing input validation) issue in the password change field for the Change Password interface allows an authenticated remote attacker in the same network to trigger OS commands via shell commands in a POST request.

On the Polycom Obihai Obi1022 VoIP phone with firmware 5.1.11, a command injection (missing input validation) issue in the NTP server IP address field for the "Time Service Settings web" interface allows an authenticated remote attacker in the same network to trigger OS commands via shell commands in a POST request.

Multiple TP-LINK products allow a network-adjacent authenticated attacker to execute arbitrary OS commands. Affected products/versions are as follows: Archer C50 firmware versions prior to 'Archer C50(JP)_V3_230505', Archer C55 firmware versions prior to 'Archer C55(JP)_V1_230506', and Archer C20 firmware versions prior to 'Archer C20(JP)_V1_230616'.

Versions 00.07.00 through 00.07.03 of Teltonika’s RUT router firmware contain an operating system (OS) command injection vulnerability in a Lua service. An attacker could exploit a parameter in the vulnerable function that calls a user-provided package name by instead providing a package with a malicious name that contains an OS command injection payload.

A vulnerability exists that can be exploited by an authenticated client that is connected to the same network segment as the CoreTec 4, having any level of access VIEWER to ADMIN. To exploit the vulnerability the attacker can inject shell commands through a particular field of the web user interface that will be executed by the system.

NETGEAR RAX30 libcms_cli Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR RAX30 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the libcms_cli module. The issue results from the lack of proper validation of a user-supplied command before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-19838.

Softnext Mail SQR Expert is an email management platform, it has insufficient filtering for a special character within a spcific function. A remote attacker authenticated as a localhost can exploit this vulnerability to perform command injection attacks, to execute arbitrary system command, manipulate system or disrupt service.

A vulnerability was found in Tecno 4G Portable WiFi TR118 TR118-M30E-RR-D-EnFrArSwHaPo-OP-V008-20220830. It has been declared as critical. This vulnerability affects unknown code of the file /goform/goform_get_cmd_process of the component Ping Tool. The manipulation of the argument url leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-246130 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Command injection vulnerability in Comtrend router WLD71-T1_v2.0.201820, affecting the GRG-4280us version. This vulnerability could allow an authenticated user to execute commands inside the router by making a POST request to the URL “/boaform/admin/formUserTracert”.

NETGEAR R7800 devices before 1.0.2.60 are affected by command injection by an authenticated user.

NETGEAR R7800 devices before 1.0.2.60 are affected by command injection by an authenticated user.

NETGEAR R7800 devices before 1.0.2.60 are affected by command injection by an authenticated user.

A command injection (missing input validation, escaping) in the ftp upgrade configuration interface on the Auerswald COMfort 1200 IP phone 3.4.4.1-10589 allows an authenticated remote attacker (simple user) -- in the same network as the device -- to trigger OS commands (like starting telnetd or opening a reverse shell) via a POST request to the web server.

A command injection (missing input validation, escaping) in the monitoring or memory status web interface in AudioCodes 405HD (firmware 2.2.12) VoIP phone allows an authenticated remote attacker in the same network as the device to trigger OS commands (like starting telnetd or opening a reverse shell) via a POST request to the web server. In combination with another attack (unauthenticated password change), the attacker can circumvent the authentication requirement.

An issue in TPLINK TL-WPA 8630 TL-WPA8630(US)_V2_2.0.4 Build 20230427 allows a remote attacker to execute arbitrary code via function sub_4256CC, which allows command injection by injecting 'devpwd'.

DrayTek Vigor3900 1.5.1.3 contains a post-authentication command injection vulnerability. This vulnerability occurs when the `action` parameter in `cgi-bin/mainfunction.cgi` is set to `commandTable.`

D-Link DIR-X3260 SetSysEmailSettings AccountName Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-X3260 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within prog.cgi, which handles HNAP requests made to the lighttpd webserver listening on TCP ports 80 and 443. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21159.