The Harmony Browse and the SandBlast Agent for Browsers installers must have admin privileges to execute some steps during the installation. Because the MS Installer allows regular users to repair their installation, an attacker running an installer before 90.08.7405 can start the installation repair and place a specially crafted binary in the repair folder, which runs with the admin privileges.

Users have access to the directory where the installation repair occurs. Since the MS Installer allows regular users to run the repair, an attacker can initiate the installation repair and place a specially crafted EXE in the repair folder which runs with the Check Point Remote Access Client privileges.

ZoneAlarm Anti-Ransomware before version 1.0.713 copies files for the report from a directory with low privileges. A sophisticated timed attacker can replace those files with malicious or linked content, such as exploiting CVE-2020-0896 on unpatched systems or using symbolic links. This allows an unprivileged user to enable escalation of privilege via local access.

A hard-link created from log file archive of Check Point ZoneAlarm up to 15.4.062 or Check Point Endpoint Security client for Windows before E80.96 to any file on the system will get its permission changed so that all users can access that linked file. Doing this on files with limited access gains the local attacker higher privileges to the file.

Check Point ZoneAlarm before version 15.8.200.19118 allows a local actor to escalate privileges during the upgrade process. In addition, weak permissions in the ProgramData\CheckPoint\ZoneAlarm\Data\Updates directory allow a local attacker the ability to execute an arbitrary file write, leading to execution of code as local system, in ZoneAlarm versions before v15.8.211.192119

Check Point Endpoint Security Client for Windows versions earlier than E86.40 copy files for forensics reports from a directory with low privileges. An attacker can replace those files with malicious or linked content, such as exploiting CVE-2020-0896 on unpatched systems or using symbolic links.

The Auto Local Logon feature in Check Point VPN-1 SecuRemote/SecureClient NGX R60 and R56 for Windows caches credentials under the Checkpoint\SecuRemote registry key, which has Everyone/Full Control permissions, which allows local users to gain privileges by reading and reusing the credentials.

Local attacker can escalate privileges on affected installations of Check Point Harmony Endpoint/ZoneAlarm Extreme Security. An attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability.

Check Point ZoneAlarm before version 15.8.139.18543 allows a local actor to escalate privileges while restoring files in Anti-Ransomware.

Check Point Endpoint Security Client for Windows, with Anti-Bot or Threat Emulation blades installed, before version E83.20, tries to load a non-existent DLL during a query for the Domain Name. An attacker with administrator privileges can leverage this to gain code execution within a Check Point Software Technologies signed binary, where under certain circumstances may cause the client to terminate.

Check Point SmartConsole before R80.10 Build 185, R80.20 Build 119, R80.30 before Build 94, R80.40 before Build 415, and R81 before Build 548 were vulnerable to a possible local privilege escalation due to running executables from a directory with write access to all authenticated users.

Untrusted DLLs in the installer's directory may be loaded and executed, leading to potentially arbitrary code execution with the installer's privileges (admin).

A DLL hijack vulnerability was reported in Lenovo PC Manager AI intelligent scenario that could allow a local attacker to execute code with elevated privileges.

A potential DLL hijacking vulnerability was reported in Lenovo One Client during an internal security assessment that could allow a local authenticated user to execute code with elevated privileges.

A DLL hijack vulnerability was reported in Lenovo Baiying that could allow a local attacker to execute code with elevated privileges.

Untrusted search path vulnerability in the installers of ScanSnap Manager prior to versions V7.0L20 and the Software Download Installer prior to WinSSInst2JP.exe and WinSSInst2iX1500JP.exe allows an attacker to gain privileges and execute arbitrary code with the privilege of the user invoking the installer via a Trojan horse DLL in an unspecified directory.

A binary hijack in Embarcadero Dev-CPP v6.3 allows attackers to execute arbitrary code via a crafted .exe file.

Uncontrolled Search Path Element vulnerability in Mitsubishi Electric GENESIS64 all versions, Mitsubishi Electric Iconics Digital Solutions GENESIS64 all versions, Mitsubishi Electric ICONICS Suite all versions, Mitsubishi Electric Iconics Digital Solutions ICONICS Suite all versions, Mitsubishi Electric MC Works64 all versions, Mitsubishi Electric GENESIS32 all versions, and Mitsubishi Electric Iconics Digital Solutions GENESIS32 all versions allows a local authenticated attacker to execute a malicious code by storing a specially crafted DLL in a specific folder. This could lead to disclose, tamper with, destroy, or delete information in the affected products, or cause a denial of service (DoS) condition on the products.

A potential DLL hijacking vulnerability was discovered in the Lenovo PC Manager during an internal security assessment that could allow a local authenticated user to execute code with elevated privileges.

A local privilege escalation is caused by Overwolf loading and executing certain dynamic link library files from a user-writeable folder in SYSTEM context on launch. This allows an attacker with unprivileged access to the system to run arbitrary code with SYSTEM privileges by placing a malicious .dll file in the respective location.

A successful exploit of these vulnerabilities requires the local user to load a crafted DLL file in the system directory on servers running Schneider Electric OFS v3.5 with version v7.40 of SCADA Expert Vijeo Citect/CitectSCADA, OFS v3.5 with version v7.30 of Vijeo Citect/CitectSCADA, and OFS v3.5 with version v7.20 of Vijeo Citect/CitectSCADA.. If the application attempts to open that file, the application could crash or allow the attacker to execute arbitrary code. Schneider Electric recommends vulnerable users upgrade the OFS to V3.5 and install the latest service pack (SP 6 or newer) for their associated version.

Uncontrolled search path element in the Intel(R) Processor Diagnostic Tool before version 4.1.5.37 may allow an authenticated user to potentially enable escalation of privilege via local access.

Uncontrolled Search Path Element vulnerability in Mitsubishi Electric GENESIS64 all versions, Mitsubishi Electric Iconics Digital Solutions GENESIS64 all versions, Mitsubishi Electric ICONICS Suite all versions, Mitsubishi Electric Iconics Digital Solutions ICONICS Suite all versions, Mitsubishi Electric MC Works64 all versions, Mitsubishi Electric GENESIS32 all versions, and Mitsubishi Electric Iconics Digital Solutions GENESIS32 all versions allows a local authenticated attacker to execute a malicious code by storing a specially crafted DLL in a specific folder. This could lead to disclose, tamper with, destroy, or delete information in the affected products, or cause a denial of service (DoS) condition on the products.

A vulnerability was found in IObit Driver Booster 11.0.0.0. It has been rated as critical. Affected by this issue is some unknown functionality in the library VCL120.BPL of the component BPL Handler. The manipulation leads to uncontrolled search path. Attacking locally is a requirement. The identifier of this vulnerability is VDB-273248. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Panda Security Dome VPN DLL Hijacking Local Privilege Escalation Vulnerability. This vulnerability allows local attackers to escalate privileges on affected installations of Panda Security Dome. An attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. The specific flaw exists within the VPN process. The process does not restrict DLL search to trusted paths, which can result in the loading of a malicious DLL. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of SYSTEM. Was ZDI-CAN-23428.

Okta Verify for Windows is vulnerable to privilege escalation through DLL hijacking. The vulnerability is fixed in Okta Verify for Windows version 5.0.2. To remediate this vulnerability, upgrade to 5.0.2 or greater.

A vulnerability was found in IObit iTop Data Recovery Pro 4.4.0.687. It has been declared as critical. Affected by this vulnerability is an unknown functionality in the library madbasic_.bpl of the component BPL Handler. The manipulation leads to uncontrolled search path. Local access is required to approach this attack. The associated identifier of this vulnerability is VDB-273247. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Local Privilege Escalation in AVG Internet Security v24 on Windows allows a local unprivileged user to escalate privileges to SYSTEM via COM-Hijacking.

XLPD v7.0.0094 and below contains an unquoted service path vulnerability which allows local users to launch processes with elevated privileges.

A vulnerability has been identified in ModelSim (All versions < V2025.1), Questa (All versions < V2025.1). An example setup script contained in affected applications allows a specific executable file to be loaded from the current working directory. This could allow an authenticated local attacker to inject arbitrary code and escalate privileges in installations where administrators or processes with elevated privileges launch the script from a user-writable directory.

An issue was discovered in Ubuntu wpa_supplicant that resulted in loading of arbitrary shared objects, which allows a local unprivileged attacker to escalate privileges to the user that wpa_supplicant runs as (usually root). Membership in the netdev group or access to the dbus interface of wpa_supplicant allow an unprivileged user to specify an arbitrary path to a module to be loaded by the wpa_supplicant process; other escalation paths might exist.

Infoblox BloxOne Endpoint for Windows through 2.2.7 allows DLL injection that can result in local privilege escalation.

A vulnerability in the Tail-f High Availability Cluster Communications (HCC) function pack of Cisco Crosswork Network Services Orchestrator (NSO) could allow an authenticated, local attacker to elevate privileges to root on an affected device. This vulnerability exists because a user-controlled search path is used to locate executable files. An attacker could exploit this vulnerability by configuring the application in a way that causes a malicious file to be executed. A successful exploit could allow the attacker to execute arbitrary code on an affected device as the root user. To exploit this vulnerability, the attacker would need valid credentials on an affected device.

A binary hijack in Orwell-Dev-Cpp v5.11 allows attackers to execute arbitrary code via a crafted .exe file.

Dell Peripheral Manager, versions prior to 1.7.6, contain an uncontrolled search path element vulnerability. An attacker could potentially exploit this vulnerability through preloading malicious DLL or symbolic link exploitation, leading to arbitrary code execution and escalation of privilege

Local privilege escalation due to a DLL hijacking vulnerability. The following products are affected: Acronis Snap Deploy (Windows) before build 3640

Local privilege escalation due to insecure folder permissions. The following products are affected: Acronis Snap Deploy (Windows) before build 3640

DLL hijacking vulnerability in KiesWrapper in Samsung Kies prior to version 2.6.4.22043_1 allows attacker to execute arbitrary code.

A DLL hijacking vulnerability in the installed for Quick Heal Total Security prior to 12.1.1.27 allows a local attacker to achieve privilege escalation, leading to execution of arbitrary code, via the installer not restricting the search path for required DLLs and then not verifying the signature of the DLLs it tries to load.

An uncontrolled search path element vulnerability in Trend Micro Apex One and Apex One as a Service could allow a local attacker to craft a special configuration file to load an untrusted library with escalated privileges on affected installations. Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability.

A DLL hijack vulnerability was reported in Lenovo stARstudio that could allow a local attacker to execute code with elevated privileges.

Uncontrolled search path element in the Intel(R) Glorp software may allow an authenticated user to potentially enable escalation of privilege via local access.

Dell SupportAssist Client Consumer versions (3.11.0 and versions prior) and Dell SupportAssist Client Commercial versions (3.2.0 and versions prior) contain a privilege escalation vulnerability. A non-admin user can exploit the vulnerability and gain admin access to the system.

On F5 BIG-IP APM 16.1.x versions prior to 16.1.2.2, 15.1.x versions prior to 15.1.5.1, 14.1.x versions prior to 14.1.4.6, 13.1.x versions prior to 13.1.5, and all versions of 12.1.x and 11.6.x, as well as F5 BIG-IP APM Clients 7.x versions prior to 7.2.1.5, a DLL Hijacking vulnerability exists in the BIG-IP Edge Client Windows Installer. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated

Multiple DLL hijacking vulnerabilities via the components instup.exe and wsc_proxy.exe in Avast Premium Security before v21.11.2500 allows attackers to execute arbitrary code or cause a Denial of Service (DoS) via a crafted DLL file.

A vulnerability has been found in Scooter Software Beyond Compare up to 3.3.5.15075 and classified as critical. Affected by this vulnerability is an unknown functionality in the library 7zxa.dll. The manipulation leads to uncontrolled search path. Attacking locally is a requirement. The real existence of this vulnerability is still doubted at the moment. The vendor explains that a system must be breached before exploiting this issue. They are not planning on making any changes to address it.

In OSIsoft PI System multiple products and versions, a local attacker can modify a search path and plant a binary to exploit the affected PI System software to take control of the local computer at Windows system privilege level, resulting in unauthorized information disclosure, deletion, or modification.

Uncontrolled search path element in the installer for Intel(R) Graphics Drivers before versions 26.20.100.7584, 15.45.30.5103, 15.40.44.5107, 15.36.38.5117, and 15.33.49.5100 may allow an authenticated user to potentially enable escalation of privilege via local access

Uncontrolled search path element vulnerability in Samsung Update prior to version 3.0.77.0 allows attackers to execute arbitrary code as Samsung Update permission.

In PuTTY versions before 0.71 on Windows, local attackers could hijack the application by putting a malicious help file in the same directory as the executable.