This vulnerability allows remote attackers to execute arbitrary code on affected installations of CentOS Web Panel cwp-e17.0.9.8.923. Authentication is not required to exploit this vulnerability. The specific flaw exists within ajax_php_pecl.php. When parsing the modulo parameter, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-9728.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of CentOS Web Panel cwp-e17.0.9.8.923. Authentication is not required to exploit this vulnerability. The specific flaw exists within ajax_admin_apis.php. When parsing the line parameter, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-9739.

Improper error message handling in Zyxel ZyWALL/USG series firmware versions 4.60 through 4.73, VPN series firmware versions 4.60 through 5.35, USG FLEX series firmware versions 4.60 through 5.35, and ATP series firmware versions 4.60 through 5.35, which could allow an unauthenticated attacker to execute some OS commands remotely by sending crafted packets to an affected device.

OS Command Injection vulnerability in McAfee ePolicy Orchestrator (ePO) 5.9.0, 5.3.2, 5.3.1, 5.1.3, 5.1.2, 5.1.1, and 5.1.0 allows attackers to run arbitrary OS commands with limited privileges via not sanitizing the user input data before exporting it into a CSV format output.

The pre-authentication command injection vulnerability in the Zyxel NAS326 firmware versions prior to V5.21(AAZF.14)C0, NAS540 firmware versions prior to V5.21(AATB.11)C0, and NAS542 firmware versions prior to V5.21(ABAG.11)C0 could allow an unauthenticated attacker to execute some operating system (OS) commands remotely by sending a crafted HTTP request.

An issue was discovered on D-Link DIR-816L devices 2.x before 1.10b04Beta02. Universal Plug and Play (UPnP) is enabled by default on port 1900. An attacker can perform command injection by injecting a payload into the Search Target (ST) field of the SSDP M-SEARCH discover packet.

There is an OS Command Injection in Mida eFramework 2.9.0 that allows an attacker to achieve Remote Code Execution (RCE) with administrative (root) privileges. Authentication is required.

BinderHub is a kubernetes-based cloud service that allows users to share reproducible interactive computing environments from code repositories. In affected versions a remote code execution vulnerability has been identified in BinderHub, where providing BinderHub with maliciously crafted input could execute code in the BinderHub context, with the potential to egress credentials of the BinderHub deployment, including JupyterHub API tokens, kubernetes service accounts, and docker registry credentials. This may provide the ability to manipulate images and other user created pods in the deployment, with the potential to escalate to the host depending on the underlying kubernetes configuration. Users are advised to update to version 0.2.0-n653. If users are unable to update they may disable the git repo provider by specifying the `BinderHub.repo_providers` as a workaround.

The Kommbox component in Rangee GmbH RangeeOS 8.0.4 is vulnerable to Remote Code Execution due to untrusted user supplied input being passed to the command line without sanitization.

Selea Targa IP OCR-ANPR Camera contains an unauthenticated command injection vulnerability in utils.php that allows remote attackers to execute arbitrary shell commands. Attackers can exploit the 'addr' and 'port' parameters to inject commands and gain www-data user access through chained local file inclusion techniques.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of CentOS Web Panel cwp-e17.0.9.8.923. Authentication is not required to exploit this vulnerability. The specific flaw exists within ajax_mod_security.php. When parsing the dominio parameter, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-9732.

An issue was discovered in SaltStack Salt through 3002. Sending crafted web requests to the Salt API, with the SSH client enabled, can result in shell injection.

# Vulnerability in `title` function **Description**: the `title` function defined in `lib/termsupport.zsh` uses `print` to set the terminal title to a user-supplied string. In Oh My Zsh, this function is always used securely, but custom user code could use the `title` function in a way that is unsafe. **Fixed in**: [a263cdac](https://github.com/ohmyzsh/ohmyzsh/commit/a263cdac). **Impacted areas**: - `title` function in `lib/termsupport.zsh`. - Custom user code using the `title` function.

Certain models of Industrial Cellular Gateway developed by Planet Technology have an OS Command Injection vulnerability, allowing unauthenticated remote attackers to inject arbitrary OS commands and execute them on the device.

The login page in Telmat AccessLog <= 6.0 (TAL_20180415) allows an attacker to get root shell access via Unauthenticated code injection over the network.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of CentOS Web Panel cwp-e17.0.9.8.923. Authentication is not required to exploit this vulnerability. The specific flaw exists within ajax_mod_security.php. When parsing the archivo parameter, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-9731.

Osprey Pump Controller version 1.01 is vulnerable an unauthenticated OS command injection vulnerability. This can be exploited to inject and execute arbitrary shell commands through a HTTP GET parameter called by DataLogView.php, EventsView.php and AlarmsView.php scripts.

The HGiga OAKlouds mobile portal does not filter special characters of the IPv6 Gateway parameter of the network interface card setting page. Remote attackers can use this vulnerability to perform command injection and execute arbitrary commands in the system without logging in.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of CentOS Web Panel cwp-e17.0.9.8.923. Authentication is not required to exploit this vulnerability. The specific flaw exists within ajax_php_pecl.php. When parsing the canal parameter, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-9745.

# Vulnerability in `rand-quote` and `hitokoto` plugins **Description**: the `rand-quote` and `hitokoto` fetch quotes from quotationspage.com and hitokoto.cn respectively, do some process on them and then use `print -P` to print them. If these quotes contained the proper symbols, they could trigger command injection. Given that they're an external API, it's not possible to know if the quotes are safe to use. **Fixed in**: [72928432](https://github.com/ohmyzsh/ohmyzsh/commit/72928432). **Impacted areas**: - `rand-quote` plugin (`quote` function). - `hitokoto` plugin (`hitokoto` function).

There is an OS Command Injection in Mida eFramework through 2.9.0 that allows an attacker to achieve Remote Code Execution (RCE) with administrative (root) privileges. No authentication is required.

A vulnerability was found in DCN DCME-720 9.1.5.11. This affects an unknown function of the file /usr/local/www/function/audit/newstatistics/ip_block.php of the component Web Management Backend. Performing manipulation of the argument ip results in os command injection. It is possible to initiate the attack remotely. The exploit has been made public and could be used. Other products might be affected as well. The vendor was contacted early about this disclosure but did not respond in any way.

The HGiga OAKlouds mobile portal does not filter special characters of the Ethernet number parameter of the network interface card setting page. Remote attackers can use this vulnerability to perform command injection and execute arbitrary commands in the system without logging in.

OS Command Injection vulnerability in quectel AG550QCN allows attackers to execute arbitrary commands via ql_atfwd.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of CentOS Web Panel cwp-el7-0.9.8.891. Authentication is not required to exploit this vulnerability. The specific flaw exists within loader_ajax.php. When parsing the line parameter, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-9259.

Shopware is an open source eCommerce platform. Versions prior to 6.4.3.1 contain a command injection vulnerability in mail agent settings. Version 6.4.3.1 contains a patch. As workarounds for older versions of 6.1, 6.2, and 6.3, corresponding security measures are also available via a plugin.

An issue was discovered on Wavlink WL-WN530HG4 M30HG4.V5030.191116 devices. Multiple shell metacharacter injection vulnerabilities exist in CGI scripts, leading to remote code execution with root privileges.

Command injection vulnerability in Asus RT-N15U 3.0.0.4.376_3754 allows a remote attacker to execute arbitrary code via the netstat function page.

Nagios XI WatchGuard Wizard before version 1.4.8 is vulnerable to remote code execution through Improper neutralisation of special elements used in an OS Command (OS Command injection).

In TOTOLINK X5000r v9.1.0cu.2350_b20230313, the file /cgi-bin/cstecgi.cgi contains an OS command injection vulnerability in delBlacklist. Authenticated Attackers can send malicious packet to execute arbitrary commands.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of CentOS Web Panel cwp-e17.0.9.8.923. Authentication is not required to exploit this vulnerability. The specific flaw exists within ajax_dashboard.php. When parsing the ai_service parameter, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-9724.

Zoho ManageEngine ADManager Plus version 7110 and prior has a Post-Auth OS command injection vulnerability.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of CentOS Web Panel cwp-e17.0.9.8.923. Authentication is not required to exploit this vulnerability. The specific flaw exists within ajax_crons.php. When parsing the user parameter, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-9716.

Nagios XI Switch Wizard before version 2.5.7 is vulnerable to remote code execution through improper neutralisation of special elements used in an OS Command (OS Command injection).

This vulnerability allows remote attackers to execute arbitrary code on affected installations of CentOS Web Panel cwp-e17.0.9.8.923. Authentication is not required to exploit this vulnerability. The specific flaw exists within ajax_list_accounts.php. When parsing the username parameter, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-9736.

OS Command injection vulnerability in D-Link DIR820LA1_FW105B03 allows attackers to escalate privileges to root via a crafted payload.

All versions of the package node-qpdf are vulnerable to Command Injection such that the package-exported method encrypt() fails to sanitize its parameter input, which later flows into a sensitive command execution API. As a result, attackers may inject malicious commands once they can specify the input pdf file path.

# Vulnerability in `pygmalion`, `pygmalion-virtualenv` and `refined` themes **Description**: these themes use `print -P` on user-supplied strings to print them to the terminal. All of them do that on git information, particularly the branch name, so if the branch has a specially-crafted name the vulnerability can be exploited. **Fixed in**: [b3ba9978](https://github.com/ohmyzsh/ohmyzsh/commit/b3ba9978). **Impacted areas**: - `pygmalion` theme. - `pygmalion-virtualenv` theme. - `refined` theme.

Sunhillo SureLine before 8.7.0.1.1 allows Unauthenticated OS Command Injection via shell metacharacters in ipAddr or dnsAddr /cgi/networkDiag.cgi.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of CentOS Web Panel cwp-e17.0.9.8.923. Authentication is not required to exploit this vulnerability. The specific flaw exists within ajax_php_pecl.php. When parsing the cha parameter, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-9718.

OS injection vulnerability in World Wide Broadcast Network AVideo version before 12.4, allows attackers to execute arbitrary code via the video link field to the Embed a video link feature.

Dell VNX2 for file version 8.1.21.266 and earlier, contain an unauthenticated remote code execution vulnerability which may lead unauthenticated users to execute commands on the system.

Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in VideoWhisper.Com VideoWhisper Live Streaming Integration allows OS Command Injection.This issue affects VideoWhisper Live Streaming Integration: from n/a through 5.5.15.

A Remote Code Execution (RCE) vulnerability was found in Smanga 3.2.7 in the /php/path/rescan.php interface. The application fails to properly sanitize user-supplied input in the mediaId parameter before using it in a system shell command. This allows an unauthenticated attacker to inject arbitrary operating system commands, leading to complete server compromise.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of CentOS Web Panel cwp-e17.0.9.8.923. Authentication is not required to exploit this vulnerability. The specific flaw exists within ajax_ftp_manager.php. When parsing the userLogin parameter, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-9737.

An issue in the handler function in /goform/telnet of Tenda FH1206 v02.03.01.35 allows attackers to execute arbitrary commands via a crafted HTTP request.

goform/AdvSetLanip endpoint on Tenda AC15 AC1900 15.03.05.19 devices allows remote attackers to execute arbitrary system commands via shell metacharacters in the lanIp POST parameter.

On DrayTek Vigor3900, Vigor2960, and Vigor300B devices before 1.5.1, cgi-bin/mainfunction.cgi/cvmcfgupload allows remote command execution via shell metacharacters in a filename when the text/x-python-script content type is used, a different issue than CVE-2020-14472.

OS Command injection vulnerability in D-Link DIR820LA1_FW105B03 allows attackers to escalate privileges to root via a crafted payload with the ping_addr parameter to ping.ccp.

TOTOlink A7100RU V7.4cu.2313_B20191024 router was discovered to contain a command injection vulnerability via the ou parameter at /setting/delStaticDhcpRules.