Heap-based buffer overflow in the read_channel_data function in file-psp.c in the Paint Shop Pro (PSP) plugin in GIMP 2.6.11 allows remote attackers to cause a denial of service (application crash) or possibly execute arbitrary code via a PSP_COMP_RLE (aka RLE compression) image file that begins a long run count at the end of the image. NOTE: some of these details are obtained from third party information.

The set_ipv4() function in zscan_rfc1035.rl in gdnsd 3.x before 3.2.1 has a stack-based buffer overflow via a long and malformed IPv4 address in zone data.

An issue was discovered in Das U-Boot through 2019.07. There is a stack-based buffer overflow in this nfs_handler reply helper function: rpc_lookup_reply.

Heap-based buffer overflow in the string_vformat function in string.c in Exim before 4.70 allows remote attackers to execute arbitrary code via an SMTP session that includes two MAIL commands in conjunction with a large message containing crafted headers, leading to improper rejection logging.

An issue was discovered in Foxit PhantomPDF before 8.3.10. The application could be exposed to Heap Corruption due to data desynchrony when adding AcroForm.

Buffer over-write when this 0-byte buffer is typecasted to some other structure and hence memory corruption in Snapdragon Auto, Snapdragon Consumer IOT, Snapdragon Mobile in QCS605, SA6155P, SM8150

Tenda AC18 V15.03.05.05 has a stack overflow vulnerability in the entrys parameter fromAddressNat function.

Ricoh SP C250DN 1.05 devices allow denial of service (issue 2 of 3). Unauthenticated crafted packets to the IPP service will cause a vulnerable device to crash. A memory corruption has been identified in the way of how the embedded device parsed the IPP packets

The set_ipv6() function in zscan_rfc1035.rl in gdnsd before 2.4.3 and 3.x before 3.2.1 has a stack-based buffer overflow via a long and malformed IPv6 address in zone data.

webadmin.c in 3proxy before 0.8.13 has an out-of-bounds write in the admin interface.

The remote admin webserver on FANUC Robotics Virtual Robot Controller 8.23 has a Buffer Overflow via a forged HTTP request.

A DNS client stack-based buffer overflow in ipdnsc_decode_name() affects Wind River VxWorks 6.5 through 7. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

Wasmi is an efficient and lightweight WebAssembly interpreter with a focus on constrained and embedded systems. In the WASMI Interpreter, an Out-of-bounds Buffer Write will arise if the host calls or resumes a Wasm function with more parameters than the default limit (128), as it will surpass the stack value. This doesn’t affect calls from Wasm to Wasm, only from host to Wasm. This vulnerability was patched in version 0.31.1.

SnmpAdm.exe in MAPLE WBT SNMP Administrator v2.0.195.15 has an Unauthenticated Remote Buffer Overflow via a long string to the CE Remote feature listening on Port 987.

An issue was discovered in Das U-Boot through 2019.07. There is a stack-based buffer overflow in this nfs_handler reply helper function: nfs_mount_reply.

musl libc through 1.1.23 has an x87 floating-point stack adjustment imbalance, related to the math/i386/ directory. In some cases, use of this library could introduce out-of-bounds writes that are not present in an application's source code.

In MatrixSSL 3.8.3 Open through 4.2.1 Open, the DTLS server mishandles incoming network messages leading to a heap-based buffer overflow of up to 256 bytes and possible Remote Code Execution in parseSSLHandshake in sslDecode.c. During processing of a crafted packet, the server mishandles the fragment length value provided in the DTLS message.

An issue was discovered in Das U-Boot through 2019.07. There is an unbounded memcpy with a failed length check at nfs_read_reply when calling store_block in the NFSv2 case.

An issue was discovered in Das U-Boot through 2019.07. There is an unbounded memcpy with a failed length check at nfs_lookup_reply.

Tenda AC18 router v15.03.05.19 and v15.03.05.05 was discovered to contain a stack overflow via the urls parameter at /goform/saveParentControlInfo.

An issue was discovered in Das U-Boot through 2019.07. There is an unbounded memcpy when parsing a UDP packet due to a net_process_received_packet integer underflow during an nc_input_packet call.

Heap buffer overflow can occur while parsing invalid MKV clip which is not standard and have invalid vorbis codec data in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables in APQ8009, APQ8017, APQ8053, APQ8064, APQ8096AU, APQ8098, MDM9206, MDM9207C, MDM9607, MSM8905, MSM8909, MSM8909W, MSM8917, MSM8920, MSM8937, MSM8939, MSM8940, MSM8953, MSM8996, MSM8996AU, MSM8998, Nicobar, QCS605, QM215, Rennell, SA6155P, SDA660, SDA845, SDM429, SDM429W, SDM439, SDM450, SDM630, SDM632, SDM636, SDM660, SDM670, SDM710, SDM845, SDX20, SM6150, SM7150, SM8150, SM8250, SXR1130, SXR2130

Tenda AC18 V15.03.05.05 has a stack overflow vulnerability in the mitInterface parameter of fromAddressNat function.

An issue was discovered in Marvell 88W8688 Wi-Fi firmware before version p52, as used on Tesla Model S/X vehicles manufactured before March 2018, via the Parrot Faurecia Automotive FC6050W module. A heap-based buffer overflow allows remote attackers to cause a denial of service or execute arbitrary code via malformed Wi-Fi packets.

An issue was discovered in Das U-Boot through 2019.07. There is a stack-based buffer overflow in this nfs_handler reply helper function: nfs_readlink_reply.

Out of bound write can occur in radio measurement request if STA receives multiple invalid rrm measurement request from AP in Snapdragon Auto, Snapdragon Compute, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music in APQ8053, APQ8096AU, MSM8998, Nicobar, QCA6574AU, QCS605, Rennell, SA6155P, Saipan, SC8180X, SDM660, SDM710, SDM845, SDX20, SDX24, SDX55, SM6150, SM7150, SM8150, SM8250, SXR2130

An issue was discovered in Das U-Boot through 2019.07. There is a stack-based buffer overflow in this nfs_handler reply helper function: nfs_umountall_reply.

formats/xml.cpp in Leanify 0.4.3 allows for a controlled out-of-bounds write in xml_memory_writer::write via characters that require escaping.

In Xymon through 4.3.28, a stack-based buffer overflow exists in the status-log viewer component because of   expansion in svcstatus.c.

there is a possible out of bounds write due to a heap buffer overflow. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation.

Heap-based buffer overflow vulnerability in Mitsubishi Electric FA Engineering Software (CPU Module Logging Configuration Tool versions 1.112R and prior, CW Configurator versions 1.011M and prior, Data Transfer versions 3.44W and prior, EZSocket versions 5.4 and prior, FR Configurator all versions, FR Configurator SW3 all versions, FR Configurator2 versions 1.24A and prior, GT Designer3 Version1(GOT1000) versions 1.250L and prior, GT Designer3 Version1(GOT2000) versions 1.250L and prior, GT SoftGOT1000 Version3 versions 3.245F and prior, GT SoftGOT2000 Version1 versions 1.250L and prior, GX Configurator-DP versions 7.14Q and prior, GX Configurator-QP all versions, GX Developer versions 8.506C and prior, GX Explorer all versions, GX IEC Developer all versions, GX LogViewer versions 1.115U and prior, GX RemoteService-I all versions, GX Works2 versions 1.597X and prior, GX Works3 versions 1.070Y and prior, iQ Monozukuri ANDON (Data Transfer) versions 1.003D and prior, iQ Monozukuri Process Remote Monitoring (Data Transfer) versions 1.002C and prior, M_CommDTM-HART all versions, M_CommDTM-IO-Link versions 1.03D and prior, MELFA-Works versions 4.4 and prior, MELSEC WinCPU Setting Utility all versions, MELSOFT EM Software Development Kit (EM Configurator) versions 1.015R and prior, MELSOFT Navigator versions 2.74C and prior, MH11 SettingTool Version2 versions 2.004E and prior, MI Configurator versions 1.004E and prior, MT Works2 versions 1.167Z and prior, MX Component versions 5.001B and prior, Network Interface Board CC IE Control utility versions 1.29F and prior, Network Interface Board CC IE Field Utility versions 1.16S and prior, Network Interface Board CC-Link Ver.2 Utility versions 1.23Z and prior, Network Interface Board MNETH utility versions 34L and prior, PX Developer versions 1.53F and prior, RT ToolBox2 versions 3.73B and prior, RT ToolBox3 versions 1.82L and prior, Setting/monitoring tools for the C Controller module (SW4PVC-CCPU) versions 4.12N and prior, and SLMP Data Collector versions 1.04E and prior) allows a remote unauthenticated attacker to cause a DoS condition on the software products, and possibly to execute a malicious code on the personal computer running the software products although it has not been reproduced, by spoofing MELSEC, GOT or FREQROL and returning crafted reply packets.

In Xymon through 4.3.28, a stack-based buffer overflow vulnerability exists in the history viewer component via a long hostname or service parameter to history.c.

Stack-based overflow vulnerability in the logMess function in Open TFTP Server MT 1.65 and earlier allows remote attackers to perform a denial of service or execute arbitrary code via a long TFTP error packet, a different vulnerability than CVE-2018-10387 and CVE-2019-12568.

An issue was discovered in Mongoose before 6.15. The parse_mqtt() function in mg_mqtt.c has a critical heap-based buffer overflow.

A malicious DNS response can trigger a number of OOB reads, writes, and other memory issues

In Xymon through 4.3.28, a buffer overflow vulnerability exists in the csvinfo CGI script. The overflow may be exploited by sending a crafted GET request that triggers an sprintf of the srcdb parameter.

Unsafe Parsing of a PNG tRNS chunk in FastStone Image Viewer through 7.5 results in a stack buffer overflow.

Delta Electronics DeviceNet Builder 2.04 has a User Mode Write AV starting at image00400000+0x000000000017a45e.

H3C H200 H200V100R004 was discovered to contain a stack overflow via the function Asp_SetTimingtimeWifiAndLed.

In Xymon through 4.3.28, a stack-based buffer overflow vulnerability exists in the alert acknowledgment CGI tool because of   expansion in acknowledge.c.

Delta Electronics DeviceNet Builder 2.04 has a User Mode Write AV starting at ntdll!RtlQueueWorkItem+0x00000000000005e3.

An issue was discovered in Squid through 4.7. When handling the tag esi:when when ESI is enabled, Squid calls ESIExpression::Evaluate. This function uses a fixed stack buffer to hold the expression while it's being evaluated. When processing the expression, it could either evaluate the top of the stack, or add a new member to the stack. When adding a new member, there is no check to ensure that the stack won't overflow.

BZ2_decompress in decompress.c in bzip2 through 1.0.6 has an out-of-bounds write when there are many selectors.

An out-of-bounds write was addressed with improved input validation. This issue is fixed in iOS 14.4 and iPadOS 14.4. A remote attacker may be able to cause arbitrary code execution.

In ZeroMQ libzmq before 4.0.9, 4.1.x before 4.1.7, and 4.2.x before 4.3.2, a remote, unauthenticated client connecting to a libzmq application, running with a socket listening with CURVE encryption/authentication enabled, may cause a stack overflow and overwrite the stack with arbitrary data, due to a buffer overflow in the library. Users running public servers with the above configuration are highly encouraged to upgrade as soon as possible, as there are no known mitigations.

In SweetScape 010 Editor 9.0.1, improper validation of arguments in the internal implementation of the StrCat function (provided by the scripting engine) allows an attacker to overwrite arbitrary memory, which could lead to code execution.

TRENDnet TEW-827DRU with firmware up to and including 2.04B03 contains multiple stack-based buffer overflows when processing user input for the setup wizard, allowing an unauthenticated user to execute arbitrary code. The vulnerability can be exercised on the local intranet or remotely if remote administration is enabled.

An issue was discovered in Squid 3.3.9 through 3.5.28 and 4.x through 4.7. When Squid is configured to use Digest authentication, it parses the header Proxy-Authorization. It searches for certain tokens such as domain, uri, and qop. Squid checks if this token's value starts with a quote and ends with one. If so, it performs a memcpy of its length minus 2. Squid never checks whether the value is just a single quote (which would satisfy its requirements), leading to a memcpy of its length minus 1.

Some Brother printers (such as the HL-L8360CDW v1.20) were affected by a heap buffer overflow vulnerability as the IPP service did not parse attribute names properly. This would allow an attacker to execute arbitrary code on the device.