A vulnerability in the Dialer interface feature for ISDN connections in Cisco IOS XE Software for Cisco 4000 Series Integrated Services Routers (ISRs) could allow an unauthenticated, adjacent attacker to pass IPv4 traffic through an ISDN channel prior to successful PPP authentication. The vulnerability is due to insufficient validation of the state of the PPP IP Control Protocol (IPCP). An attacker could exploit this vulnerability by making an ISDN call to an affected device and sending traffic through the ISDN channel prior to successful PPP authentication. Alternatively, an unauthenticated, remote attacker could exploit this vulnerability by sending traffic through an affected device that is configured to exit via an ISDN connection for which both the Dialer interface and the Basic Rate Interface (BRI) have been configured, but the Challenge Handshake Authentication Protocol (CHAP) password for PPP does not match the remote end. A successful exploit could allow the attacker to pass IPv4 traffic through an unauthenticated ISDN connection for a few seconds, from initial ISDN call setup until PPP authentication fails.

The generated Kotlin DSL settings allowed usage of an unencrypted connection for resolving artifacts. The issue was fixed in JetBrains TeamCity 2018.2.3.

A flaw was found in Skupper. When Skupper is initialized with the console-enabled and with console-auth set to Openshift, it configures the openshift oauth-proxy with a static cookie-secret. In certain circumstances, this may allow an attacker to bypass authentication to the Skupper console via a specially-crafted cookie.

In GE Aestiva and Aespire versions 7100 and 7900, a vulnerability exists where serial devices are connected via an added unsecured terminal server to a TCP/IP network configuration, which could allow an attacker to remotely modify device configuration and silence alarms.

An improper authentication vulnerability in CA Privileged Access Manager 2.x allows attackers to spoof IP addresses in a log file.

A Security Feature Bypass vulnerability exists in ASP.NET when the number of incorrect login attempts is not validated, aka "ASP.NET Security Feature Bypass Vulnerability." This affects ASP.NET, ASP.NET Core 1.1, ASP.NET Core 1.0, ASP.NET Core 2.0, ASP.NET MVC 5.2.

Duo Network Gateway 1.2.9 and earlier may incorrectly utilize the results of XML DOM traversal and canonicalization APIs in such a way that an attacker may be able to manipulate the SAML data without invalidating the cryptographic signature, allowing the attack to potentially bypass authentication to SAML service providers.

An issue was discovered in Extreme Networks ExtremeWireless WiNG 5.x before 5.8.6.9 and 5.9.x before 5.9.1.3. There is No Authentication for the AeroScout Service via a crafted UDP packet.

A flaw in the profile section of Online Voting System 1.0 allows an unauthenticated user to set an arbitrary password for other accounts.

Wizkunde SAMLBase may incorrectly utilize the results of XML DOM traversal and canonicalization APIs in such a way that an attacker may be able to manipulate the SAML data without invalidating the cryptographic signature, allowing the attack to potentially bypass authentication to SAML service providers.

An issue was discovered in GitLab Community and Enterprise Edition before 11.4.13, 11.5.x before 11.5.6, and 11.6.x before 11.6.1. It has Incorrect Access Control.

The owned function of a smart contract implementation for DDQ, an tradable Ethereum ERC20 token, allows attackers to change the owner of the contract, because the function does not check the caller's identity.

The ToOwner() function of a smart contract implementation for Cryptbond Network (CBN), an tradable Ethereum ERC20 token, allows attackers to change the owner of the contract, because the function does not check the caller's identity.

The quaker function of a smart contract implementation for BOMBBA (BOMB), an tradable Ethereum ERC20 token, allows attackers to change the owner of the contract, because the function does not check the caller's identity.

The NETM() function of a smart contract implementation for NewIntelTechMedia (NETM), an tradable Ethereum ERC20 token, allows attackers to change the owner of the contract, because the function does not check the caller's identity.

An issue was discovered on D-Link DIR-850L 1.21WW devices. A partially completed WPA handshake is sufficient for obtaining full access to the wireless network. A client can access the network by sending packets on Data Frames to the AP without encryption.

A vulnerability in Metasys ADS/ADX/OAS 10 versions prior to 10.1.5 and Metasys ADS/ADX/OAS 11 versions prior to 11.0.2 allows unverified password change.

A vulnerability in the login page of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to log in without credentials and access all roles without any restrictions. This vulnerability is due to exposed sensitive Security Assertion Markup Language (SAML) metadata. An attacker could exploit this vulnerability by using the exposed SAML metadata to bypass authentication to the user portal. A successful exploit could allow the attacker to access all roles without any restrictions.

In Versa Director, the un-authentication request found.

The Very Simple Contact Form WordPress plugin before 11.6 exposes the solution to the captcha in the rendered contact form, both as hidden input fields and as plain text in the page, making it very easy for bots to bypass the captcha check, rendering the page a likely target for spam bots.

file.cgi in Secure Computing SecurityReporter (aka Network Security Analyzer) before 4.6.3 allows remote attackers to bypass authentication via a name parameter ending with a "%00.gif" sequence. NOTE: a separate traversal vulnerability could be leveraged to download arbitrary files.

class-woo-banner-management.php in the MULTIDOTS WooCommerce Category Banner Management plugin 1.1.0 for WordPress has an Unauthenticated Settings Change Vulnerability, related to certain wp_ajax_nopriv_ usage. Anyone can change the plugin's setting by simply sending a request with a wbm_save_shop_page_banner_data action.

glFusion CMS v1.7.9 is affected by an arbitrary user registration vulnerability in /public_html/users.php. An attacker can register with the mailbox of any user. When users want to register, they will find that the mailbox has been occupied.

It is possible to manipulate the JWT token without the knowledge of the JWT secret and authenticate without valid JWT token as any user. This is happening only in the situation when zOSMF doesn’t have the APAR PH12143 applied. This issue affects: 1.16 versions to 1.19. What happens is that the services using the ZAAS client or the API ML API to query will be deceived into believing the information in the JWT token is valid when it isn’t. It’s possible to use this to persuade the southbound service that different user is authenticated.

In JetBrains Ktor before 1.6.4, nonce verification during the OAuth2 authentication process is implemented improperly.

A vulnerability in the session identification management functionality of the web-based interface of Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, remote attacker to hijack a valid user session on an affected system. The vulnerability exists because the affected software does not properly clear previously assigned session identifiers for a user session when a user authenticates to the web-based interface. An attacker could exploit this vulnerability by using an existing session identifier to connect to the software through the web-based interface. Successful exploitation could allow the attacker to hijack an authenticated user's browser session on the system. Versions 8.1 and 8.5 are affected.

QNAP NAS application Proxy Server through version 1.2.0 does not authenticate requests properly. Successful exploitation can lead to change of the settings of Proxy Server.

Apache Solr uses a PKI based mechanism to secure inter-node communication when security is enabled. It is possible to create a specially crafted node name that does not exist as part of the cluster and point it to a malicious node. This can trick the nodes in cluster to believe that the malicious node is a member of the cluster. So, if Solr users have enabled BasicAuth authentication mechanism using the BasicAuthPlugin or if the user has implemented a custom Authentication plugin, which does not implement either "HttpClientInterceptorPlugin" or "HttpClientBuilderPlugin", his/her servers are vulnerable to this attack. Users who only use SSL without basic authentication or those who use Kerberos are not affected.

On the TP-Link TL-SG108E 1.0, the upgrade process can be requested remotely without authentication (httpupg.cgi with a parameter called cmd). This affects the 1.1.2 Build 20141017 Rel.50749 firmware.

The "OpenID Connect Relying Party and OAuth 2.0 Resource Server" (aka mod_auth_openidc) module before 2.1.6 for the Apache HTTP Server does not skip OIDC_CLAIM_ and OIDCAuthNHeader headers in an "AuthType oauth20" configuration, which allows remote attackers to bypass authentication via crafted HTTP traffic.

A vulnerability in Cisco IOS 15.5(3)M Software for Cisco CallManager Express (CME) could allow an unauthenticated, remote attacker to make unauthorized phone calls. The vulnerability is due to a configuration restriction in the toll-fraud protections component of the affected software. An attacker could exploit this vulnerability to place unauthorized, long-distance phone calls by using an affected system. Cisco Bug IDs: CSCuy40939.

Remote file upload vulnerability in Wordpress Plugin Mobile App Native 3.0.

A vulnerability has been identified in SIMATIC S7-1200 CPU family (incl. SIPLUS variants) (V4.5.0). Affected devices fail to authenticate against configured passwords when provisioned using TIA Portal V13. This could allow an attacker using TIA Portal V13 or later versions to bypass authentication and download arbitrary programs to the PLC. The vulnerability does not occur when TIA Portal V13 SP1 or any later version was used to provision the device.

FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a software implementation that runs on any commodity hardware. Prior to version 1.10.7, FreeSWITCH does not authenticate SIP MESSAGE requests, leading to spam and message spoofing. By default, SIP requests of the type MESSAGE (RFC 3428) are not authenticated in the affected versions of FreeSWITCH. MESSAGE requests are relayed to SIP user agents registered with the FreeSWITCH server without requiring any authentication. Although this behaviour can be changed by setting the `auth-messages` parameter to `true`, it is not the default setting. Abuse of this security issue allows attackers to send SIP MESSAGE messages to any SIP user agent that is registered with the server without requiring authentication. Additionally, since no authentication is required, chat messages can be spoofed to appear to come from trusted entities. Therefore, abuse can lead to spam and enable social engineering, phishing and similar attacks. This issue is patched in version 1.10.7. Maintainers recommend that this SIP message type is authenticated by default so that FreeSWITCH administrators do not need to be explicitly set the `auth-messages` parameter. When following such a recommendation, a new parameter can be introduced to explicitly disable authentication.

Detcon Sitewatch Gateway, all versions without cellular, an attacker can edit settings on the device using a specially crafted URL.

The "OpenID Connect Relying Party and OAuth 2.0 Resource Server" (aka mod_auth_openidc) module before 2.1.5 for the Apache HTTP Server does not skip OIDC_CLAIM_ and OIDCAuthNHeader headers in an "OIDCUnAuthAction pass" configuration, which allows remote attackers to bypass authentication via crafted HTTP traffic.

In JetBrains TeamCity before 2021.1.1, insufficient authentication checks for agent requests were made.

An issue was discovered in Midnight Commander through 4.8.26. When establishing an SFTP connection, the fingerprint of the server is neither checked nor displayed. As a result, a user connects to the server without the ability to verify its authenticity.

An issue was discovered on Samsung mobile devices with M(6.0) and N(7.0, 7.1) software. An unauthenticated attacker can register a new security certificate. The Samsung ID is SVE-2017-9659 (September 2017).

The web interface on the LifeSize Room appliance LS_RM1_3.5.3 (11) allows remote attackers to bypass authentication via unspecified data associated with a "true" authentication status, related to AMF data and the LSRoom_Remoting.authenticate function in gateway.php.

The optional ActiveMQ LDAP login module can be configured to use anonymous access to the LDAP server. In this case, for Apache ActiveMQ Artemis prior to version 2.16.0 and Apache ActiveMQ prior to versions 5.16.1 and 5.15.14, the anonymous context is used to verify a valid users password in error, resulting in no check on the password.

Improper MDM policy management vulnerability in KME module prior to KCS version 1.39 allows MDM users to bypass Knox Manage authentication.

The SimpleCaptcha implementation in Liferay Portal 7.3.4, 7.3.5 and Liferay DXP 7.3 before fix pack 1 does not invalidate CAPTCHA answers after it is used, which allows remote attackers to repeatedly perform actions protected by a CAPTCHA challenge by reusing the same CAPTCHA answer.

RubyGem omniauth-facebook has an access token security vulnerability

Multiple vulnerabilities exist in the web-based management interface of Cisco Small Business RV Series Routers. A remote attacker could execute arbitrary commands or bypass authentication and upload files on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

connoppp.cgi on ZTE ZXDSL 831CII devices does not require HTTP Basic Authentication, which allows remote attackers to modify the PPPoE configuration or set up a malicious configuration via a GET request.

This affects all versions of package react-adal. It is possible for a specially crafted JWT token and request URL can cause the nonce, session and refresh values to be incorrectly validated, causing the application to treat an attacker-generated JWT token as authentic. The logical defect is caused by how the nonce, session and refresh values are stored in the browser local storage or session storage. Each key is automatically appended by ||. When the received nonce and session keys are generated, the list of values is stored in the browser storage, separated by ||, with || always appended to the end of the list. Since || will always be the last 2 characters of the stored values, an empty string ("") will always be in the list of the valid values. Therefore, if an empty session parameter is provided in the callback URL, and a specially-crafted JWT token contains an nonce value of "" (empty string), then adal.js will consider the JWT token as authentic.

The iThemes Security (formerly Better WP Security) plugin before 7.7.0 for WordPress does not enforce a new-password requirement for an existing account until the second login occurs.