IBM ApplinX 11.1 stores sensitive information in cleartext in memory that could be obtained by an authenticated user.

Jenkins WSO2 Oauth Plugin 1.0 and earlier does not mask the WSO2 Oauth client secret on the global configuration form, increasing the potential for attackers to observe and capture it.

Gradle Build Action allows users to execute a Gradle Build in their GitHub Actions workflow. A vulnerability impacts GitHub workflows using the Gradle Build Action prior to version 2.4.2 that have executed the Gradle Build Tool with the configuration cache enabled, potentially exposing secrets configured for the repository. Secrets configured for GitHub Actions are normally passed to the Gradle Build Tool via environment variables. Due to the way that the Gradle Build Tool records these environment variables, they may be persisted into an entry in the GitHub Actions cache. This data stored in the GitHub Actions cache can be read by a GitHub Actions workflow running in an untrusted context, such as that running for a Pull Request submitted by a developer via a repository fork. This vulnerability was discovered internally through code review, and we have not seen any evidence of it being exploited in the wild. However, in addition to upgrading the Gradle Build Action, affected users should delete any potentially vulnerable cache entries and may choose to rotate any potentially affected secrets. Gradle Build Action v2.4.2 and newer no longer saves this sensitive data for later use, preventing ongoing leakage of secrets via the GitHub Actions Cache. While upgrading to the latest version of the Gradle Build Action will prevent leakage of secrets going forward, additional actions may be required due to current or previous GitHub Actions Cache entries containing this information. Current cache entries will remain vulnerable until they are forcibly deleted or they expire naturally after 7 days of not being used. Potentially vulnerable entries can be easily identified in the GitHub UI by searching for a cache entry with key matching `configuration-cache-*`. The maintainers recommend that users of the Gradle Build Action inspect their list of cache entries and manually delete any that match this pattern. While maintainers have not seen any evidence of this vulnerability being exploited, they recommend cycling any repository secrets if you cannot be certain that these have not been compromised. Compromise could occur if a user runs a GitHub Actions workflow for a pull request attempting to exploit this data. Warning signs to look for in a pull request include: - Making changes to GitHub Actions workflow files in a way that may attempt to read/extract data from the Gradle User Home or `<project-root>/.gradle` directories. - Making changes to Gradle build files or other executable files that may be invoked by a GitHub Actions workflow, in a way that may attempt to read/extract information from these locations. Some workarounds to limit the impact of this vulnerability are available: - If the Gradle project does not opt-in to using the configuration cache, then it is not vulnerable. - If the Gradle project does opt-in to using the configuration-cache by default, then the `--no-configuration-cache` command-line argument can be used to disable this feature in a GitHub Actions workflow. In any case, we recommend that users carefully inspect any pull request before approving the execution of GitHub Actions workflows. It may be prudent to require approval for all PRs from external contributors.

A cleartext storage of sensitive information vulnerability in FortiOS command line interface in versions 6.2.4 and earlier and FortiProxy 2.0.0, 1.2.9 and earlier may allow an authenticated attacker to obtain sensitive information such as users passwords by connecting to FortiGate CLI and executing the "diag sys ha checksum show" command.

Cleartext Storage of Sensitive Information in Memory vulnerability in Mitsubishi Electric Corporation GX Works3 versions 1.015R and later, GX Works2 all versions and GX Developer versions 8.40S and later allows a remote unauthenticated attacker to disclose sensitive information. As a result, unauthenticated users could obtain information about the project file for MELSEC safety CPU modules or project file for MELSEC Q/FX/L series with security setting.

A flaw was found in ovirt-engine, which leads to the logging of plaintext passwords in the log file when using otapi-style. This flaw allows an attacker with sufficient privileges to read the log file, leading to confidentiality loss.

Veritas System Recovery (VSR) 18 and 21 stores a network destination password in the Windows registry during configuration of the backup configuration. This could allow a Windows user (who has sufficient privileges) to access a network file system that they were not authorized to access.

A flaw was found in foreman before version 1.15 in the logging of adding and registering images. An attacker with access to the foreman log file would be able to view passwords for provisioned systems in the log file, allowing them to access those systems.

Jenkins view-cloner Plugin 1.1 and earlier stores passwords unencrypted in job config.xml files on the Jenkins controller where they can be viewed by users with Extended Read permission, or access to the Jenkins controller file system.

Cleartext storage of sensitive information exists in SkyBridge MB-A100/110 firmware Ver. 4.2.0 and earlier, which may allow a remote authenticated attacker to obtain an APN credential for the product.

Jenkins lambdatest-automation Plugin 1.20.10 and earlier logs LAMBDATEST Credentials access token at the INFO level, potentially resulting in its exposure.

Plaintext Password in Registry vulnerability in 42gears surelock windows surelockwinsetupv2.40.0.Exe on Windows (Registery modules) allows Retrieve Admin user credentials This issue affects surelock windows: from 2.3.12 through 2.40.0.

Information disclosure vulnerability exists in Pgpool-II 4.4.0 to 4.4.1 (4.4 series), 4.3.0 to 4.3.4 (4.3 series), 4.2.0 to 4.2.11 (4.2 series), 4.1.0 to 4.1.14 (4.1 series), 4.0.0 to 4.0.21 (4.0 series), All versions of 3.7 series, All versions of 3.6 series, All versions of 3.5 series, All versions of 3.4 series, and All versions of 3.3 series. A specific database user's authentication information may be obtained by another database user. As a result, the information stored in the database may be altered and/or database may be suspended by a remote attacker who successfully logged in the product with the obtained credentials.

Dell Wyse Management Suite 3.6.1 and below contains a Sensitive Data Exposure vulnerability. A low privileged malicious user could potentially exploit this vulnerability in order to obtain credentials. The attacker may be able to use the exposed credentials to access the target device and perform unauthorized actions.

An issue was discovered in PrimeKey EJBCA before 7.6.0. When audit logging changes to the alias configurations of various protocols that use an enrollment secret, any modifications to the secret were logged in cleartext in the audit log (that can only be viewed by an administrator). This affects use of any of the following protocols: SCEP, CMP, or EST.

The BIG-IP and BIG-IQ systems do not encrypt some sensitive information written to Database (DB) variables.  Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

An issue was discovered in the view_statistics (aka View frontend statistics) extension before 2.0.1 for TYPO3. It saves all GET and POST data of TYPO3 frontend requests to the database. Depending on the extensions used on a TYPO3 website, sensitive data (e.g., cleartext passwords if ext:felogin is installed) may be saved.

Parse Server is an open source backend that can be deployed to any infrastructure that can run Node.js. It is an npm package "parse-server". In Parse Server before version 4.5.0, user passwords involved in LDAP authentication are stored in cleartext. This is fixed in version 4.5.0 by stripping password after authentication to prevent cleartext password storage.

3CX System through 2022-03-17 stores cleartext passwords in a database.

GigaVUE-OS (GVOS) 5.4 - 5.9 stores a Redis database password in plaintext.

Jenkins Consul KV Builder Plugin 2.0.13 and earlier does not mask the HashiCorp Consul ACL Token on the global configuration form, increasing the potential for attackers to observe and capture it.

A vulnerability was found in Intergard SGS 8.7.0. It has been classified as problematic. This affects an unknown part. The manipulation leads to cleartext storage of sensitive information in memory. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-234447. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

An issue was discovered in Sonatype Nexus Repository Manager 2.x before 2.14.17 and 3.x before 3.22.1. Admin users can retrieve the LDAP server system username/password (as configured in nxrm) in cleartext.

An attacker could retrieve plain-text credentials stored in a XML file on PR100088 Modbus gateway versions prior to Release R02 (or Software Version 1.1.13166) through FTP.

IBM Sterling B2B Integrator Standard Edition 5.2.0.0 through 5.2.6.5 and 6.0.0.0 through 6.0.3.1 discloses sensitive information to an authenticated user from the dashboard UI which could be used in further attacks against the system. IBM X-Force ID: 172753.

Dell EMC PowerConnect 8024, 7000, M6348, M6220, M8024 and M8024-K running firmware versions prior to 5.1.15.2 contain a plain-text password storage vulnerability. TACACS\Radius credentials are stored in plain text in the system settings menu. An authenticated malicious user with access to the system settings menu may obtain the exposed password to use it in further attacks.

In Centreon Web through 2.8.29, disclosure of external components' passwords allows authenticated attackers to move laterally to external components.

A vulnerability in the Server Utilities of Cisco Integrated Management Controller (IMC) could allow an authenticated, remote attacker to gain unauthorized access to sensitive user information from the configuration data that is stored on the affected system. The vulnerability is due to insufficient protection of data in the configuration file. An attacker could exploit this vulnerability by downloading the configuration file. An exploit could allow the attacker to use the sensitive information from the file to elevate privileges.

WordPress 4.8.2 stores cleartext wp_signups.activation_key values (but stores the analogous wp_users.user_activation_key values as hashes), which might make it easier for remote attackers to hijack unactivated user accounts by leveraging database read access (such as access gained through an unspecified SQL injection vulnerability).

NETSAS Enigma NMS 65.0.0 and prior does not encrypt sensitive data stored within the SQL database. It is possible for an attacker to expose unencrypted sensitive data.

Nextcloud mail is an email app for the nextcloud home server platform. In versions prior to 2.2.2 user's passwords were stored in cleartext in the database during the duration of OAuth2 setup procedure. Any attacker or malicious user with access to the database would have access to these user passwords until the OAuth setup has been completed. It is recommended that the Nextcloud Mail app is upgraded to 2.2.2. There are no known workarounds for this issue.

Generated Support Bundles contains private S/MIME and PGP keys if containing folder is not hidden. This issue affects: OTRS AG ((OTRS)) Community Edition 6.0.x version 6.0.1 and later versions. OTRS AG OTRS 7.0.x version 7.0.28 and prior versions; 8.0.x version 8.0.15 and prior versions.

An internal product security audit of Lenovo XClarity Controller (XCC) discovered that the XCC configuration backup/restore password may be written to an internal XCC log buffer if Lenovo XClarity Administrator (LXCA) is used to perform the backup/restore. The backup/restore password typically exists in this internal log buffer for less than 10 minutes before being overwritten. Generating an FFDC service log will include the log buffer contents, including the backup/restore password if present. The FFDC service log is only generated when requested by a privileged XCC user and it is only accessible to the privileged XCC user that requested the file. The backup/restore password is not captured if the backup/restore is initiated directly from XCC.

A cleartext password storage issue was discovered in Katello, versions 3.x.x.x before katello 3.12.0.9. Registry credentials used during container image discovery were inadvertently logged without being masked. This flaw could expose the registry credentials to other privileged users.

IBM Security Identity Manager 7.0.2 stores user credentials in plain clear text which can be read by an authenticated user. IBM X-Force ID: 199998.

A vulnerability was found in business-central, as shipped in rhdm-7.5.1 and rhpam-7.5.1, where encoded passwords are stored in errai_security_context. The encoding used for storing the passwords is Base64, not an encryption algorithm, and any recovery of these passwords could lead to user passwords being exposed.

A vulnerability has been identified in Control Center Server (CCS) (All versions < V1.5.0), SiNVR/SiVMS Video Server (All versions < V5.0.0). The FTP services of the SiVMS/SiNVR Video Server and the Control Center Server (CCS) maintain log files that store login credentials in cleartext. In configurations where the FTP service is enabled, authenticated remote attackers could extract login credentials of other users of the service.

Jenkins Caliper CI Plugin stores credentials unencrypted in job config.xml files on the Jenkins master where they can be viewed by users with Extended Read permission, or access to the master file system.

IBM Security Secret Server 10.6 stores potentially sensitive information in config files that could be read by an authenticated user. IBM X-Force ID: 190048.

An issue was discovered in Italtel Embrace 1.6.4. The web application inserts cleartext passwords in the HTML source code. An authenticated user is able to edit the configuration of the email server. Once the user access the edit function, the web application fills the edit form with the current credentials for the email account, including the cleartext password.

Jenkins Gogs Plugin stored credentials unencrypted in job config.xml files on the Jenkins master where they can be viewed by users with Extended Read permission, or access to the master file system.

A vulnerability in Brocade SANnav before v2.3.1 and v2.3.0a prints the Brocade SANnav password in clear text in supportsave logs when a user schedules a switch Supportsave from Brocade SANnav.

Cloudera Manager 5.x before 5.7.1 places Sensitive Data in cleartext Readable Files.

IBM Security Guardium 11.2 discloses sensitive information in the response headers that could be used in further attacks against the system. IBM X-Force ID: 174850.

The administrative passwords for all versions of Bond JetSelect are stored within an unprotected file on the filesystem, rather than encrypted within the MySQL database. This backup copy of the passwords is made as part of the installation script, after the administrator has generated a password using ENCtool.jar (see CVE-2019-13022). This allows any low-privilege user who can read this file to trivially obtain the passwords for the administrative accounts of the JetSelect application. The path to the file containing the encoded password hash is /opt/JetSelect/SFC/resources/sfc-general-properties.

A vulnerability has been identified in Control Center Server (CCS) (All versions < V1.5.0). The user configuration menu in the web interface of the Control Center Server (CCS) transfers user passwords in clear to the client (browser). An attacker with administrative privileges for the web interface could be able to read (and not only reset) passwords of other CCS users.

The Momo application 2.1.9 for Android stores confidential information insecurely on the system (i.e., in cleartext), which allows a non-root user to find out the username/password of a valid user and a user's access token via Logcat.

The Send Anywhere application 9.4.18 for Android stores confidential information insecurely on the system (i.e., in cleartext), which allows a non-root user to find out the username/password of a valid user via /data/data/com.estmob.android.sendanywhere/shared_prefs/sendanywhere_device.xml.

Jenkins NeoLoad Plugin 2.2.5 and earlier stored credentials unencrypted in its global configuration file and in job config.xml files on the Jenkins master where they could be viewed by users with Extended Read permission, or access to the master file system.

Jenkins iceScrum Plugin 1.1.4 and earlier stored credentials unencrypted in job config.xml files on the Jenkins master where they could be viewed by users with Extended Read permission, or access to the master file system.