Untrusted search path vulnerability in Installer of MagicConnect Client program distributed before 2021 March 1 allows an attacker to gain privileges and via a Trojan horse DLL in an unspecified directory and to execute arbitrary code with the privilege of the user invoking the installer when a terminal is connected remotely using Remote desktop.

A vulnerability in Cisco Packet Tracer for Windows could allow an authenticated, local attacker to perform a DLL injection attack on an affected device. To exploit this vulnerability, the attacker must have valid credentials on the Windows system. This vulnerability is due to incorrect handling of directory paths at run time. An attacker could exploit this vulnerability by inserting a configuration file in a specific path on the system, which can cause a malicious DLL file to be loaded when the application starts. A successful exploit could allow an attacker with normal user privileges to execute arbitrary code on the affected system with the privileges of another user’s account.

A vulnerability in the interprocess communication (IPC) channel of Cisco AnyConnect Secure Mobility Client for Windows could allow an authenticated, local attacker to perform a DLL hijacking attack on an affected device if the VPN Posture (HostScan) Module is installed on the AnyConnect client. This vulnerability is due to insufficient validation of resources that are loaded by the application at run time. An attacker could exploit this vulnerability by sending a crafted IPC message to the AnyConnect process. A successful exploit could allow the attacker to execute arbitrary code on the affected machine with SYSTEM privileges. To exploit this vulnerability, the attacker needs valid credentials on the Windows system.

A vulnerability in the loading mechanism of specific DLLs of Cisco Advanced Malware Protection (AMP) for Endpoints for Windows and Immunet for Windows could allow an authenticated, local attacker to perform a DLL hijacking attack. To exploit this vulnerability, the attacker would need valid credentials on the Windows system. This vulnerability is due to incorrect handling of directory search paths at run time. An attacker could exploit this vulnerability by placing a malicious DLL file on the targeted system. This file will execute when the vulnerable application launches. A successful exploit could allow the attacker to execute arbitrary code on the targeted system with SYSTEM privileges.

MemProcFS before 5.17 contains multiple unsafe library-loading patterns that enable DLL and shared-library hijacking across six attack surfaces, including bare-name LoadLibraryU and dlopen calls without path qualification for vmmpyc, libMSCompression, and plugin DLLs. An attacker who places a malicious DLL or shared library in the working directory or manipulates LD_LIBRARY_PATH can achieve arbitrary code execution when MemProcFS loads.

A vulnerability was found in XINJE XDPPro up to 3.7.17a. It has been rated as critical. Affected by this issue is some unknown functionality in the library cfgmgr32.dll. The manipulation leads to uncontrolled search path. An attack has to be approached locally. The exploit has been disclosed to the public and may be used. VDB-241586 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Uncontrolled search path element in the installer for the Intel(R) Rapid Storage Technology software, before versions 17.9.0.34, 18.0.0.640 and 18.1.0.24, may allow an authenticated user to potentially enable escalation of privilege via local access.

Adobe Genuine Service version 6.6 (and earlier) is affected by an Uncontrolled Search Path element vulnerability. An authenticated attacker with admin privileges could plant custom binaries and execute them with System permissions. Exploitation of this issue requires user interaction.

Adobe Lightroom versions 9.2.0.10 and earlier have an insecure library loading vulnerability. Successful exploitation could lead to privilege escalation.

Uncontrolled search path in the Intel(R) NUC M15 Laptop Kit Driver Pack software before updated version 1.1 may allow an authenticated user to potentially enable escalation of privilege via local access.

A dynamic library loading issue was addressed with improved path searching. This issue is fixed in Windows Migration Assistant 2.2.0.0 (v. 1A11). Running the installer in an untrusted directory may result in arbitrary code execution.

Uncontrolled search path in software installer for Intel(R) PROSet/Wireless WiFi in Windows 10 may allow an authenticated user to potentially enable escalation of privilege via local access.

In UniFi Video v3.10.1 (for Windows 7/8/10 x64) there is a Local Privileges Escalation to SYSTEM from arbitrary file deletion and DLL hijack vulnerabilities. The issue was fixed by adjusting the .tsExport folder when the controller is running on Windows and adjusting the SafeDllSearchMode in the windows registry when installing UniFi-Video controller. Affected Products: UniFi Video Controller v3.10.2 (for Windows 7/8/10 x64) and prior. Fixed in UniFi Video Controller v3.10.3 and newer.

Trend Micro Password Manager for Windows version 5.0 is affected by a DLL hijacking vulnerability would could potentially allow an attacker privleged escalation.

Western Digital WesternDigitalSSDDashboardSetup.exe before 3.0.2.0 allows DLL Hijacking.

A DLL search path vulnerability was reported in the Lenovo HardwareScan Plugin for the Lenovo Vantage hardware scan feature prior to version 1.0.46.11 that could allow escalation of privilege.

Loading a DLL through an Uncontrolled Search Path Element in Bosch IP Helper up to and including version 1.00.0008 potentially allows an attacker to execute arbitrary code on a victim's system. A prerequisite is that the victim is tricked into placing a malicious DLL in the same application directory as the portable IP Helper application.

Earlier than HiSuite 10.1.0.500 have a DLL hijacking vulnerability. This vulnerability exists due to some DLL file is loaded by HiSuite improperly. And it allows an attacker to load this DLL file of the attacker's choosing.

Untrusted Search Path vulnerability in the windows installer of Google Earth Pro versions prior to 7.3.3 allows an attacker to insert malicious local files to execute unauthenticated remote code on the targeted system.

OpenVPN before version 2.5.3 on Windows allows local users to load arbitrary dynamic loadable libraries via an OpenSSL configuration file if present, which allows the user to run arbitrary code with the same privilege level as the main OpenVPN process (openvpn.exe).

A DLL preloading vulnerability was reported in Lenovo Driver Management prior to version 2.9.0719.1104 that could allow privilege escalation.

Notepad3 through 6.25.822.1 contains a DLL search-order hijacking vulnerability in the About-dialog code path in src/Notepad3.c. The application calls LoadLibrary(L"MSFTEDIT.DLL") with a bare DLL name, which allows a local attacker to place a malicious MSFTEDIT.DLL in the application directory or another preferred DLL search location and achieve arbitrary code execution in the context of the user when the About dialog is opened.

A CWE-427: Uncontrolled Search Path Element vulnerability exists in ProSoft Configurator (v1.002 and prior), for the PMEPXM0100 (H) module, which could cause the execution of untrusted code when using double click to open a project file which may trigger execution of a malicious DLL.

Calling an executable through an Uncontrolled Search Path Element in the Bosch Video Streaming Gateway installer up to and including version 6.45.10 potentially allows an attacker to execute arbitrary code on a victim's system. A prerequisite is that the victim is tricked into placing a malicious exe in the same directory where the installer is started from.

Loading a DLL through an Uncontrolled Search Path Element in Bosch BVMS and BVMS Viewer in versions 10.1.0, 10.0.1, 10.0.0 and 9.0.0 and older potentially allows an attacker to execute arbitrary code on a victim's system. This affects both the installer as well as the installed application. This also affects Bosch DIVAR IP 7000 R2, Bosch DIVAR IP all-in-one 5000 and Bosch DIVAR IP all-in-one 7000 with installers and installed BVMS versions prior to BVMS 10.1.1.

Loading a DLL through an Uncontrolled Search Path Element in the Bosch Configuration Manager installer up to and including version 7.21.0078 potentially allows an attacker to execute arbitrary code on a victim's system. A prerequisite is that the victim is tricked into placing a malicious DLL in the same directory where the installer is started from.

A DLL Hijacking vulnerability in Eaton's 9000x Programming and Configuration Software v 2.0.38 and prior allows an attacker to execute arbitrary code by replacing the required DLLs with malicious DLLs when the software try to load vci11un6.DLL and cinpl.DLL.

An Uncontrolled Search Path Element (CWE-427) vulnerability in SmartControl version 4.3.15 and versions released before April 15, 2020 may allow an authenticated user to escalate privileges by placing a specially crafted DLL file in the search path. This issue was fixed in version 1.0.7, which was released after April 15, 2020. (Note, the version numbering system changed significantly between version 4.3.15 and version 1.0.7.)

Loading a DLL through an Uncontrolled Search Path Element in the Bosch Video Client installer up to and including version 1.7.6.079 potentially allows an attacker to execute arbitrary code on a victim's system. A prerequisite is that the victim is tricked into placing a malicious DLL in the same directory where the installer is started from.

Adobe Dimension version 3.4 (and earlier) is affected by an Uncontrolled Search Path Element element. An unauthenticated attacker could leverage this vulnerability to achieve arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

ScreenToGif is a screen recording tool. In versions from 2.42.1 and prior, ScreenToGif is vulnerable to DLL sideloading via version.dll . When the portable executable is run from a user-writable directory, it loads version.dll from the application directory instead of the Windows System32 directory, allowing arbitrary code execution in the user's context. This is especially impactful because ScreenToGif is primarily distributed as a portable application intended to be run from user-writable locations. At time of publication, there are no publicly available patches.

Untrusted search path vulnerability in self-extracting files created by EpsonNet SetupManager versions 2.2.14 and earlier, and Offirio SynergyWare PrintDirector versions 1.6x/1.6y and earlier allows an attacker to gain privileges via a Trojan horse DLL in an unspecified directory.

Local privilege escalation due to DLL hijacking vulnerability. The following products are affected: Acronis Cyber Protect Home Office (Windows) before build 40901, Acronis Cyber Protect Cloud Agent (Windows) before build 39378, Acronis Cyber Protect 16 (Windows) before build 39938, Acronis True Image OEM (Windows) before build 42575.

NVIDIA GeForce NOW application software on Windows, all versions prior to 2.0.25.119, contains a vulnerability in its open-source software dependency in which the OpenSSL library is vulnerable to binary planting attacks by a local user, which may lead to code execution or escalation of privileges.

SAP Business Client, version 7.0, allows an attacker after a successful social engineering attack to inject malicious code as a DLL file in untrusted directories that can be executed by the application, due to uncontrolled search path element. An attacker could thereby control the behavior of the application.

SonicWall Global VPN client version 4.10.4.0314 and earlier have an insecure library loading (DLL hijacking) vulnerability. Successful exploitation could lead to remote code execution in the target system.

Installer of Panasonic AutoDownloader version 1.2.8 contains an issue with the DLL search path, which may lead to loading a crafted DLL file in the same directory.

Sunshine for Windows, version v2025.122.141614, contains a DLL search-order hijacking vulnerability, allowing attackers to insert a malicious DLL in user-writeable PATH directories.

DLL search path hijacking vulnerability in the UPDF.exe executable for Windows version 1.8.5.0 allows attackers with local access to execute arbitrary code by placing a dxtn.dll file of their choice in the 'C:\Users\<user>\AppData\Local\Microsoft\WindowsApps\' directory, which could lead to arbitrary code execution and persistence.

DLL search path hijacking vulnerability in the UPDF.exe executable for Windows version 1.8.5.0 allows attackers with local access to execute arbitrary code by placing a FREngine.dll file of their choice in the 'C:\Users\<user>\AppData\Local\UPDF\FREngine\Bin64\' directory, which could lead to arbitrary code execution and persistence.

DLL search path hijacking vulnerability in the UPDF.exe executable for Windows version 1.8.5.0 allows attackers with local access to execute arbitrary code by placing a FREngine.dll file of their choice in the 'C:\Users\Public\AppData\Local\UPDF\FREngine\Bin64\' directory, which could lead to arbitrary code execution and persistence.

The user-controllable executable files will be directly executed by high-privilege processes, allowing low-privilege users to have the opportunity to elevate their privileges to NT AUTHORITY\SYSTEM.

A vulnerability has been found in Mp3tag up to 3.26d and classified as problematic. This vulnerability affects unknown code in the library tak_deco_lib.dll of the component DLL Handler. The manipulation leads to uncontrolled search path. It is possible to launch the attack on the local host. The exploit has been disclosed to the public and may be used. Upgrading to version 3.26e is able to address this issue. It is recommended to upgrade the affected component. VDB-272614 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early, responded in a very professional manner and immediately released a fixed version of the affected product.

A local privilege escalation is caused by Overwolf loading and executing certain dynamic link library files from a user-writeable folder in SYSTEM context on launch. This allows an attacker with unprivileged access to the system to run arbitrary code with SYSTEM privileges by placing a malicious .dll file in the respective location.

AnyDesk before 6.1.0 on Windows, when run in portable mode on a system where the attacker has write access to the application directory, allows this attacker to compromise a local user account via a read-only setting for a Trojan horse gcapi.dll file.

pymanager included the current working directory in sys.path meaning modules could be shadowed by modules in the current working directory. As a result, if a user executes a pymanager-generated command (e.g., pip, pytest) from an attacker-controlled directory, a malicious module in that directory can be imported and executed instead of the intended package.

Acronis True Image for Windows prior to 2021 Update 3 allowed local privilege escalation due to a DLL hijacking vulnerability in multiple components, aka an Untrusted Search Path issue.

Loading a DLL through an Uncontrolled Search Path Element in the Bosch Video Recording Manager installer up to and including version 3.82.0055 for 3.82, up to and including version 3.81.0064 for 3.81 and 3.71 and older potentially allows an attacker to execute arbitrary code on a victim's system. A prerequisite is that the victim is tricked into placing a malicious DLL in the same directory where the installer is started from.

An issue in RAONWIZ K Editor v2018.0.0.10 allows attackers to perform a DLL hijacking attack when the service or system is restarted.

Loading a DLL through an Uncontrolled Search Path Element in the Bosch Monitor Wall installer up to and including version 10.00.0164 potentially allows an attacker to execute arbitrary code on a victim's system. A prerequisite is that the victim is tricked into placing a malicious DLL in the same directory where the installer is started from.