In the Linux kernel, the following vulnerability has been resolved: s390/ptrace: handle setting of fpc register correctly If the content of the floating point control (fpc) register of a traced process is modified with the ptrace interface the new value is tested for validity by temporarily loading it into the fpc register. This may lead to corruption of the fpc register of the tracing process: if an interrupt happens while the value is temporarily loaded into the fpc register, and within interrupt context floating point or vector registers are used, the current fp/vx registers are saved with save_fpu_regs() assuming they belong to user space and will be loaded into fp/vx registers when returning to user space. test_fp_ctl() restores the original user space fpc register value, however it will be discarded, when returning to user space. In result the tracer will incorrectly continue to run with the value that was supposed to be used for the traced process. Fix this by saving fpu register contents with save_fpu_regs() before using test_fp_ctl().

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix possible out-of-bound read in ath12k_htt_pull_ppdu_stats() len is extracted from HTT message and could be an unexpected value in case errors happen, so add validation before using to avoid possible out-of-bound read in the following message iteration and parsing. The same issue also applies to ppdu_info->ppdu_stats.common.num_users, so validate it before using too. These are found during code review. Compile test only.

In the Linux kernel, the following vulnerability has been resolved: media: uvcvideo: Fix OOB read If the index provided by the user is bigger than the mask size, we might do an out of bound read.

In the Linux kernel, the following vulnerability has been resolved: thermal: intel: powerclamp: fix mismatch in get function for max_idle KASAN reported this [ 444.853098] BUG: KASAN: global-out-of-bounds in param_get_int+0x77/0x90 [ 444.853111] Read of size 4 at addr ffffffffc16c9220 by task cat/2105 ... [ 444.853442] The buggy address belongs to the variable: [ 444.853443] max_idle+0x0/0xffffffffffffcde0 [intel_powerclamp] There is a mismatch between the param_get_int and the definition of max_idle. Replacing param_get_int with param_get_byte resolves this issue.

In the Linux kernel, the following vulnerability has been resolved: i3c: mipi-i3c-hci: Fix out of bounds access in hci_dma_irq_handler Do not loop over ring headers in hci_dma_irq_handler() that are not allocated and enabled in hci_dma_init(). Otherwise out of bounds access will occur from rings->headers[i] access when i >= number of allocated ring headers.

In the Linux kernel, the following vulnerability has been resolved: x86/alternatives: Disable KASAN in apply_alternatives() Fei has reported that KASAN triggers during apply_alternatives() on a 5-level paging machine: BUG: KASAN: out-of-bounds in rcu_is_watching() Read of size 4 at addr ff110003ee6419a0 by task swapper/0/0 ... __asan_load4() rcu_is_watching() trace_hardirqs_on() text_poke_early() apply_alternatives() ... On machines with 5-level paging, cpu_feature_enabled(X86_FEATURE_LA57) gets patched. It includes KASAN code, where KASAN_SHADOW_START depends on __VIRTUAL_MASK_SHIFT, which is defined with cpu_feature_enabled(). KASAN gets confused when apply_alternatives() patches the KASAN_SHADOW_START users. A test patch that makes KASAN_SHADOW_START static, by replacing __VIRTUAL_MASK_SHIFT with 56, works around the issue. Fix it for real by disabling KASAN while the kernel is patching alternatives. [ mingo: updated the changelog ]

In the Linux kernel, the following vulnerability has been resolved: HID: intel-ish-hid: ipc: Disable and reenable ACPI GPE bit The EHL (Elkhart Lake) based platforms provide a OOB (Out of band) service, which allows to wakup device when the system is in S5 (Soft-Off state). This OOB service can be enabled/disabled from BIOS settings. When enabled, the ISH device gets PME wake capability. To enable PME wakeup, driver also needs to enable ACPI GPE bit. On resume, BIOS will clear the wakeup bit. So driver need to re-enable it in resume function to keep the next wakeup capability. But this BIOS clearing of wakeup bit doesn't decrement internal OS GPE reference count, so this reenabling on every resume will cause reference count to overflow. So first disable and reenable ACPI GPE bit using acpi_disable_gpe().

In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: Fix oob check condition in mwifiex_process_rx_packet Only skip the code path trying to access the rfc1042 headers when the buffer is too small, so the driver can still process packets without rfc1042 headers.

In the Linux kernel, the following vulnerability has been resolved: nfc: nci: assert requested protocol is valid The protocol is used in a bit mask to determine if the protocol is supported. Assert the provided protocol is less than the maximum defined so it doesn't potentially perform a shift-out-of-bounds and provide a clearer error for undefined protocols vs unsupported ones.

In the Linux kernel, the following vulnerability has been resolved: usb: isp1760: Fix out-of-bounds array access Running the driver through kasan gives an interesting splat: BUG: KASAN: global-out-of-bounds in isp1760_register+0x180/0x70c Read of size 20 at addr f1db2e64 by task swapper/0/1 (...) isp1760_register from isp1760_plat_probe+0x1d8/0x220 (...) This happens because the loop reading the regmap fields for the different ISP1760 variants look like this: for (i = 0; i < HC_FIELD_MAX; i++) { ... } Meaning it expects the arrays to be at least HC_FIELD_MAX - 1 long. However the arrays isp1760_hc_reg_fields[], isp1763_hc_reg_fields[], isp1763_hc_volatile_ranges[] and isp1763_dc_volatile_ranges[] are dynamically sized during compilation. Fix this by putting an empty assignment to the [HC_FIELD_MAX] and [DC_FIELD_MAX] array member at the end of each array. This will make the array one member longer than it needs to be, but avoids the risk of overwriting whatever is inside [HC_FIELD_MAX - 1] and is simple and intuitive to read. Also add comments explaining what is going on.

An Out-of-Bounds Read was discovered in arch/arm/mach-footbridge/personal-pci.c in the Linux kernel through 5.12.11 because of the lack of a check for a value that shouldn't be negative, e.g., access to element -2 of an array, aka CID-298a58e165e4.

In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Fix stack-out-of-bounds memory access from ioapic_write_indirect() KASAN reports the following issue: BUG: KASAN: stack-out-of-bounds in kvm_make_vcpus_request_mask+0x174/0x440 [kvm] Read of size 8 at addr ffffc9001364f638 by task qemu-kvm/4798 CPU: 0 PID: 4798 Comm: qemu-kvm Tainted: G X --------- --- Hardware name: AMD Corporation DAYTONA_X/DAYTONA_X, BIOS RYM0081C 07/13/2020 Call Trace: dump_stack+0xa5/0xe6 print_address_description.constprop.0+0x18/0x130 ? kvm_make_vcpus_request_mask+0x174/0x440 [kvm] __kasan_report.cold+0x7f/0x114 ? kvm_make_vcpus_request_mask+0x174/0x440 [kvm] kasan_report+0x38/0x50 kasan_check_range+0xf5/0x1d0 kvm_make_vcpus_request_mask+0x174/0x440 [kvm] kvm_make_scan_ioapic_request_mask+0x84/0xc0 [kvm] ? kvm_arch_exit+0x110/0x110 [kvm] ? sched_clock+0x5/0x10 ioapic_write_indirect+0x59f/0x9e0 [kvm] ? static_obj+0xc0/0xc0 ? __lock_acquired+0x1d2/0x8c0 ? kvm_ioapic_eoi_inject_work+0x120/0x120 [kvm] The problem appears to be that 'vcpu_bitmap' is allocated as a single long on stack and it should really be KVM_MAX_VCPUS long. We also seem to clear the lower 16 bits of it with bitmap_zero() for no particular reason (my guess would be that 'bitmap' and 'vcpu_bitmap' variables in kvm_bitmap_or_dest_vcpus() caused the confusion: while the later is indeed 16-bit long, the later should accommodate all possible vCPUs).

An out-of-bounds (OOB) memory access flaw was found in fs/f2fs/node.c in the f2fs module in the Linux kernel in versions before 5.12.0-rc4. A bounds check failure allows a local attacker to gain access to out-of-bounds memory leading to a system crash or a leak of internal kernel information. The highest threat from this vulnerability is to system availability.

An issue was discovered in the Linux kernel through 5.11.3. drivers/scsi/scsi_transport_iscsi.c is adversely affected by the ability of an unprivileged user to craft Netlink messages.

In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Do not attempt to read past "commit" When iterating over the ring buffer while the ring buffer is active, the writer can corrupt the reader. There's barriers to help detect this and handle it, but that code missed the case where the last event was at the very end of the page and has only 4 bytes left. The checks to detect the corruption by the writer to reads needs to see the length of the event. If the length in the first 4 bytes is zero then the length is stored in the second 4 bytes. But if the writer is in the process of updating that code, there's a small window where the length in the first 4 bytes could be zero even though the length is only 4 bytes. That will cause rb_event_length() to read the next 4 bytes which could happen to be off the allocated page. To protect against this, fail immediately if the next event pointer is less than 8 bytes from the end of the commit (last byte of data), as all events must be a minimum of 8 bytes anyway.

In the Linux kernel, the following vulnerability has been resolved: usbnet: ipheth: fix possible overflow in DPE length check Originally, it was possible for the DPE length check to overflow if wDatagramIndex + wDatagramLength > U16_MAX. This could lead to an OoB read. Move the wDatagramIndex term to the other side of the inequality. An existing condition ensures that wDatagramIndex < urb->actual_length.

In the Linux kernel, the following vulnerability has been resolved: netfilter: x_tables: fix LED ID check in led_tg_check() Syzbot has reported the following BUG detected by KASAN: BUG: KASAN: slab-out-of-bounds in strlen+0x58/0x70 Read of size 1 at addr ffff8881022da0c8 by task repro/5879 ... Call Trace: <TASK> dump_stack_lvl+0x241/0x360 ? __pfx_dump_stack_lvl+0x10/0x10 ? __pfx__printk+0x10/0x10 ? _printk+0xd5/0x120 ? __virt_addr_valid+0x183/0x530 ? __virt_addr_valid+0x183/0x530 print_report+0x169/0x550 ? __virt_addr_valid+0x183/0x530 ? __virt_addr_valid+0x183/0x530 ? __virt_addr_valid+0x45f/0x530 ? __phys_addr+0xba/0x170 ? strlen+0x58/0x70 kasan_report+0x143/0x180 ? strlen+0x58/0x70 strlen+0x58/0x70 kstrdup+0x20/0x80 led_tg_check+0x18b/0x3c0 xt_check_target+0x3bb/0xa40 ? __pfx_xt_check_target+0x10/0x10 ? stack_depot_save_flags+0x6e4/0x830 ? nft_target_init+0x174/0xc30 nft_target_init+0x82d/0xc30 ? __pfx_nft_target_init+0x10/0x10 ? nf_tables_newrule+0x1609/0x2980 ? nf_tables_newrule+0x1609/0x2980 ? rcu_is_watching+0x15/0xb0 ? nf_tables_newrule+0x1609/0x2980 ? nf_tables_newrule+0x1609/0x2980 ? __kmalloc_noprof+0x21a/0x400 nf_tables_newrule+0x1860/0x2980 ? __pfx_nf_tables_newrule+0x10/0x10 ? __nla_parse+0x40/0x60 nfnetlink_rcv+0x14e5/0x2ab0 ? __pfx_validate_chain+0x10/0x10 ? __pfx_nfnetlink_rcv+0x10/0x10 ? __lock_acquire+0x1384/0x2050 ? netlink_deliver_tap+0x2e/0x1b0 ? __pfx_lock_release+0x10/0x10 ? netlink_deliver_tap+0x2e/0x1b0 netlink_unicast+0x7f8/0x990 ? __pfx_netlink_unicast+0x10/0x10 ? __virt_addr_valid+0x183/0x530 ? __check_object_size+0x48e/0x900 netlink_sendmsg+0x8e4/0xcb0 ? __pfx_netlink_sendmsg+0x10/0x10 ? aa_sock_msg_perm+0x91/0x160 ? __pfx_netlink_sendmsg+0x10/0x10 __sock_sendmsg+0x223/0x270 ____sys_sendmsg+0x52a/0x7e0 ? __pfx_____sys_sendmsg+0x10/0x10 __sys_sendmsg+0x292/0x380 ? __pfx___sys_sendmsg+0x10/0x10 ? lockdep_hardirqs_on_prepare+0x43d/0x780 ? __pfx_lockdep_hardirqs_on_prepare+0x10/0x10 ? exc_page_fault+0x590/0x8c0 ? do_syscall_64+0xb6/0x230 do_syscall_64+0xf3/0x230 entry_SYSCALL_64_after_hwframe+0x77/0x7f ... </TASK> Since an invalid (without '\0' byte at all) byte sequence may be passed from userspace, add an extra check to ensure that such a sequence is rejected as possible ID and so never passed to 'kstrdup()' and further.

NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability in the kernel mode layer (nvlddmkm.sys) handler for DxgkDdiEscape where an out of bounds array access may lead to denial of service or information disclosure.

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: limit printed string from FW file There's no guarantee here that the file is always with a NUL-termination, so reading the string may read beyond the end of the TLV. If that's the last TLV in the file, it can perhaps even read beyond the end of the file buffer. Fix that by limiting the print format to the size of the buffer we have.

An issue was discovered in the Linux kernel before 5.8.1. net/bluetooth/hci_event.c has a slab out-of-bounds read in hci_extended_inquiry_result_evt, aka CID-51c19bf3d5cf.

In the Linux kernel, the following vulnerability has been resolved: objtool, nvmet: Fix out-of-bounds stack access in nvmet_ctrl_state_show() The csts_state_names[] array only has six sparse entries, but the iteration code in nvmet_ctrl_state_show() iterates seven, resulting in a potential out-of-bounds stack read. Fix that. Fixes the following warning with an UBSAN kernel: vmlinux.o: warning: objtool: .text.nvmet_ctrl_state_show: unexpected end of section

In the Linux kernel, the following vulnerability has been resolved: ext4: fix OOB read when checking dotdot dir Mounting a corrupted filesystem with directory which contains '.' dir entry with rec_len == block size results in out-of-bounds read (later on, when the corrupted directory is removed). ext4_empty_dir() assumes every ext4 directory contains at least '.' and '..' as directory entries in the first data block. It first loads the '.' dir entry, performs sanity checks by calling ext4_check_dir_entry() and then uses its rec_len member to compute the location of '..' dir entry (in ext4_next_entry). It assumes the '..' dir entry fits into the same data block. If the rec_len of '.' is precisely one block (4KB), it slips through the sanity checks (it is considered the last directory entry in the data block) and leaves "struct ext4_dir_entry_2 *de" point exactly past the memory slot allocated to the data block. The following call to ext4_check_dir_entry() on new value of de then dereferences this pointer which results in out-of-bounds mem access. Fix this by extending __ext4_check_dir_entry() to check for '.' dir entries that reach the end of data block. Make sure to ignore the phony dir entries for checksum (by checking name_len for non-zero). Note: This is reported by KASAN as use-after-free in case another structure was recently freed from the slot past the bound, but it is really an OOB read. This issue was found by syzkaller tool. Call Trace: [ 38.594108] BUG: KASAN: slab-use-after-free in __ext4_check_dir_entry+0x67e/0x710 [ 38.594649] Read of size 2 at addr ffff88802b41a004 by task syz-executor/5375 [ 38.595158] [ 38.595288] CPU: 0 UID: 0 PID: 5375 Comm: syz-executor Not tainted 6.14.0-rc7 #1 [ 38.595298] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 38.595304] Call Trace: [ 38.595308] <TASK> [ 38.595311] dump_stack_lvl+0xa7/0xd0 [ 38.595325] print_address_description.constprop.0+0x2c/0x3f0 [ 38.595339] ? __ext4_check_dir_entry+0x67e/0x710 [ 38.595349] print_report+0xaa/0x250 [ 38.595359] ? __ext4_check_dir_entry+0x67e/0x710 [ 38.595368] ? kasan_addr_to_slab+0x9/0x90 [ 38.595378] kasan_report+0xab/0xe0 [ 38.595389] ? __ext4_check_dir_entry+0x67e/0x710 [ 38.595400] __ext4_check_dir_entry+0x67e/0x710 [ 38.595410] ext4_empty_dir+0x465/0x990 [ 38.595421] ? __pfx_ext4_empty_dir+0x10/0x10 [ 38.595432] ext4_rmdir.part.0+0x29a/0xd10 [ 38.595441] ? __dquot_initialize+0x2a7/0xbf0 [ 38.595455] ? __pfx_ext4_rmdir.part.0+0x10/0x10 [ 38.595464] ? __pfx___dquot_initialize+0x10/0x10 [ 38.595478] ? down_write+0xdb/0x140 [ 38.595487] ? __pfx_down_write+0x10/0x10 [ 38.595497] ext4_rmdir+0xee/0x140 [ 38.595506] vfs_rmdir+0x209/0x670 [ 38.595517] ? lookup_one_qstr_excl+0x3b/0x190 [ 38.595529] do_rmdir+0x363/0x3c0 [ 38.595537] ? __pfx_do_rmdir+0x10/0x10 [ 38.595544] ? strncpy_from_user+0x1ff/0x2e0 [ 38.595561] __x64_sys_unlinkat+0xf0/0x130 [ 38.595570] do_syscall_64+0x5b/0x180 [ 38.595583] entry_SYSCALL_64_after_hwframe+0x76/0x7e

do_core_note in readelf.c in libmagic.a in file 5.35 has a stack-based buffer over-read, related to file_printable, a different vulnerability than CVE-2018-10360.

do_core_note in readelf.c in libmagic.a in file 5.35 has an out-of-bounds read because memcpy is misused.

In the Linux kernel 5.0.0-rc7 (as distributed in ubuntu/linux.git on kernel.ubuntu.com), mounting a crafted f2fs filesystem image and performing some operations can lead to slab-out-of-bounds read access in ttm_put_pages in drivers/gpu/drm/ttm/ttm_page_alloc.c. This is related to the vmwgfx or ttm module.

In the Linux kernel, the following vulnerability has been resolved: of/irq: Prevent device address out-of-bounds read in interrupt map walk When of_irq_parse_raw() is invoked with a device address smaller than the interrupt parent node (from #address-cells property), KASAN detects the following out-of-bounds read when populating the initial match table (dyndbg="func of_irq_parse_* +p"): OF: of_irq_parse_one: dev=/soc@0/picasso/watchdog, index=0 OF: parent=/soc@0/pci@878000000000/gpio0@17,0, intsize=2 OF: intspec=4 OF: of_irq_parse_raw: ipar=/soc@0/pci@878000000000/gpio0@17,0, size=2 OF: -> addrsize=3 ================================================================== BUG: KASAN: slab-out-of-bounds in of_irq_parse_raw+0x2b8/0x8d0 Read of size 4 at addr ffffff81beca5608 by task bash/764 CPU: 1 PID: 764 Comm: bash Tainted: G O 6.1.67-484c613561-nokia_sm_arm64 #1 Hardware name: Unknown Unknown Product/Unknown Product, BIOS 2023.01-12.24.03-dirty 01/01/2023 Call trace: dump_backtrace+0xdc/0x130 show_stack+0x1c/0x30 dump_stack_lvl+0x6c/0x84 print_report+0x150/0x448 kasan_report+0x98/0x140 __asan_load4+0x78/0xa0 of_irq_parse_raw+0x2b8/0x8d0 of_irq_parse_one+0x24c/0x270 parse_interrupts+0xc0/0x120 of_fwnode_add_links+0x100/0x2d0 fw_devlink_parse_fwtree+0x64/0xc0 device_add+0xb38/0xc30 of_device_add+0x64/0x90 of_platform_device_create_pdata+0xd0/0x170 of_platform_bus_create+0x244/0x600 of_platform_notify+0x1b0/0x254 blocking_notifier_call_chain+0x9c/0xd0 __of_changeset_entry_notify+0x1b8/0x230 __of_changeset_apply_notify+0x54/0xe4 of_overlay_fdt_apply+0xc04/0xd94 ... The buggy address belongs to the object at ffffff81beca5600 which belongs to the cache kmalloc-128 of size 128 The buggy address is located 8 bytes inside of 128-byte region [ffffff81beca5600, ffffff81beca5680) The buggy address belongs to the physical page: page:00000000230d3d03 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1beca4 head:00000000230d3d03 order:1 compound_mapcount:0 compound_pincount:0 flags: 0x8000000000010200(slab|head|zone=2) raw: 8000000000010200 0000000000000000 dead000000000122 ffffff810000c300 raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffffff81beca5500: 04 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffffff81beca5580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffffff81beca5600: 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffffff81beca5680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffffff81beca5700: 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc ================================================================== OF: -> got it ! Prevent the out-of-bounds read by copying the device address into a buffer of sufficient size.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: fix the Out-of-bounds read warning using index i - 1U may beyond element index for mc_data[] when i = 0.

An out-of-bounds read in the vrend_blit_need_swizzle function in vrend_renderer.c in virglrenderer through 0.8.0 allows guest OS users to cause a denial of service via VIRGL_CCMD_BLIT commands.

In the Linux kernel, the following vulnerability has been resolved: usbnet: ipheth: fix DPE OoB read Fix an out-of-bounds DPE read, limit the number of processed DPEs to the amount that fits into the fixed-size NDP16 header.

In the Linux kernel, the following vulnerability has been resolved: usbnet: ipheth: use static NDP16 location in URB Original code allowed for the start of NDP16 to be anywhere within the URB based on the `wNdpIndex` value in NTH16. Only the start position of NDP16 was checked, so it was possible for even the fixed-length part of NDP16 to extend past the end of URB, leading to an out-of-bounds read. On iOS devices, the NDP16 header always directly follows NTH16. Rely on and check for this specific format. This, along with NCM-specific minimal URB length check that already exists, will ensure that the fixed-length part of NDP16 plus a set amount of DPEs fit within the URB. Note that this commit alone does not fully address the OoB read. The limit on the amount of DPEs needs to be enforced separately.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate zero num_subauth before sub_auth is accessed Access psid->sub_auth[psid->num_subauth - 1] without checking if num_subauth is non-zero leads to an out-of-bounds read. This patch adds a validation step to ensure num_subauth != 0 before sub_auth is accessed.

In the Linux kernel, the following vulnerability has been resolved: vlan: enforce underlying device type Currently, VLAN devices can be created on top of non-ethernet devices. Besides the fact that it doesn't make much sense, this also causes a bug which leaks the address of a kernel function to usermode. When creating a VLAN device, we initialize GARP (garp_init_applicant) and MRP (mrp_init_applicant) for the underlying device. As part of the initialization process, we add the multicast address of each applicant to the underlying device, by calling dev_mc_add. __dev_mc_add uses dev->addr_len to determine the length of the new multicast address. This causes an out-of-bounds read if dev->addr_len is greater than 6, since the multicast addresses provided by GARP and MRP are only 6 bytes long. This behaviour can be reproduced using the following commands: ip tunnel add gretest mode ip6gre local ::1 remote ::2 dev lo ip l set up dev gretest ip link add link gretest name vlantest type vlan id 100 Then, the following command will display the address of garp_pdu_rcv: ip maddr show | grep 01:80:c2:00:00:21 Fix the bug by enforcing the type of the underlying device during VLAN device initialization.

In the Linux kernel, the following vulnerability has been resolved: orangefs: fix a oob in orangefs_debug_write I got a syzbot report: slab-out-of-bounds Read in orangefs_debug_write... several people suggested fixes, I tested Al Viro's suggestion and made this patch.

An out of bounds (OOB) memory access flaw was found in the Linux kernel in relay_file_read_start_pos in kernel/relay.c in the relayfs. This flaw could allow a local attacker to crash the system or leak kernel internal information.

In the Linux kernel, the following vulnerability has been resolved: iio: health: afe4403: Fix oob read in afe4403_read_raw KASAN report out-of-bounds read as follows: BUG: KASAN: global-out-of-bounds in afe4403_read_raw+0x42e/0x4c0 Read of size 4 at addr ffffffffc02ac638 by task cat/279 Call Trace: afe4403_read_raw iio_read_channel_info dev_attr_show The buggy address belongs to the variable: afe4403_channel_leds+0x18/0xffffffffffffe9e0 This issue can be reproduced by singe command: $ cat /sys/bus/spi/devices/spi0.0/iio\:device0/in_intensity6_raw The array size of afe4403_channel_leds is less than channels, so access with chan->address cause OOB read in afe4403_read_raw. Fix it by moving access before use it.

In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Fix an out-of-bounds bug in __snd_usb_parse_audio_interface() There may be a bad USB audio device with a USB ID of (0x04fa, 0x4201) and the number of it's interfaces less than 4, an out-of-bounds read bug occurs when parsing the interface descriptor for this device. Fix this by checking the number of interfaces.

In the Linux kernel, the following vulnerability has been resolved: bpf: Check validity of link->type in bpf_link_show_fdinfo() If a newly-added link type doesn't invoke BPF_LINK_TYPE(), accessing bpf_link_type_strs[link->type] may result in an out-of-bounds access. To spot such missed invocations early in the future, checking the validity of link->type in bpf_link_show_fdinfo() and emitting a warning when such invocations are missed.

In the Linux kernel, the following vulnerability has been resolved: soc: qcom: socinfo: Avoid out of bounds read of serial number On MSM8916 devices, the serial number exposed in sysfs is constant and does not change across individual devices. It's always: db410c:/sys/devices/soc0$ cat serial_number 2644893864 The firmware used on MSM8916 exposes SOCINFO_VERSION(0, 8), which does not have support for the serial_num field in the socinfo struct. There is an existing check to avoid exposing the serial number in that case, but it's not correct: When checking the item_size returned by SMEM, we need to make sure the *end* of the serial_num is within bounds, instead of comparing with the *start* offset. The serial_number currently exposed on MSM8916 devices is just an out of bounds read of whatever comes after the socinfo struct in SMEM. Fix this by changing offsetof() to offsetofend(), so that the size of the field is also taken into account.

In the Linux kernel, the following vulnerability has been resolved: xfrm: state: fix out-of-bounds read during lookup lookup and resize can run in parallel. The xfrm_state_hash_generation seqlock ensures a retry, but the hash functions can observe a hmask value that is too large for the new hlist array. rehash does: rcu_assign_pointer(net->xfrm.state_bydst, ndst) [..] net->xfrm.state_hmask = nhashmask; While state lookup does: h = xfrm_dst_hash(net, daddr, saddr, tmpl->reqid, encap_family); hlist_for_each_entry_rcu(x, net->xfrm.state_bydst + h, bydst) { This is only safe in case the update to state_bydst is larger than net->xfrm.xfrm_state_hmask (or if the lookup function gets serialized via state spinlock again). Fix this by prefetching state_hmask and the associated pointers. The xfrm_state_hash_generation seqlock retry will ensure that the pointer and the hmask will be consistent. The existing helpers, like xfrm_dst_hash(), are now unsafe for RCU side, add lockdep assertions to document that they are only safe for insert side. xfrm_state_lookup_byaddr() uses the spinlock rather than RCU. AFAICS this is an oversight from back when state lookup was converted to RCU, this lock should be replaced with RCU in a future patch.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix Out-of-Bounds Read in ksmbd_vfs_stream_read An offset from client could be a negative value, It could lead to an out-of-bounds read from the stream_buf. Note that this issue is coming when setting 'vfs objects = streams_xattr parameter' in ksmbd.conf.

In the Linux kernel, the following vulnerability has been resolved: x86/CPU/AMD: Terminate the erratum_1386_microcode array The erratum_1386_microcode array requires an empty entry at the end. Otherwise x86_match_cpu_with_stepping() will continue iterate the array after it ended. Add an empty entry to erratum_1386_microcode to its end.

In the Linux kernel, the following vulnerability has been resolved: security/keys: fix slab-out-of-bounds in key_task_permission KASAN reports an out of bounds read: BUG: KASAN: slab-out-of-bounds in __kuid_val include/linux/uidgid.h:36 BUG: KASAN: slab-out-of-bounds in uid_eq include/linux/uidgid.h:63 [inline] BUG: KASAN: slab-out-of-bounds in key_task_permission+0x394/0x410 security/keys/permission.c:54 Read of size 4 at addr ffff88813c3ab618 by task stress-ng/4362 CPU: 2 PID: 4362 Comm: stress-ng Not tainted 5.10.0-14930-gafbffd6c3ede #15 Call Trace: __dump_stack lib/dump_stack.c:82 [inline] dump_stack+0x107/0x167 lib/dump_stack.c:123 print_address_description.constprop.0+0x19/0x170 mm/kasan/report.c:400 __kasan_report.cold+0x6c/0x84 mm/kasan/report.c:560 kasan_report+0x3a/0x50 mm/kasan/report.c:585 __kuid_val include/linux/uidgid.h:36 [inline] uid_eq include/linux/uidgid.h:63 [inline] key_task_permission+0x394/0x410 security/keys/permission.c:54 search_nested_keyrings+0x90e/0xe90 security/keys/keyring.c:793 This issue was also reported by syzbot. It can be reproduced by following these steps(more details [1]): 1. Obtain more than 32 inputs that have similar hashes, which ends with the pattern '0xxxxxxxe6'. 2. Reboot and add the keys obtained in step 1. The reproducer demonstrates how this issue happened: 1. In the search_nested_keyrings function, when it iterates through the slots in a node(below tag ascend_to_node), if the slot pointer is meta and node->back_pointer != NULL(it means a root), it will proceed to descend_to_node. However, there is an exception. If node is the root, and one of the slots points to a shortcut, it will be treated as a keyring. 2. Whether the ptr is keyring decided by keyring_ptr_is_keyring function. However, KEYRING_PTR_SUBTYPE is 0x2UL, the same as ASSOC_ARRAY_PTR_SUBTYPE_MASK. 3. When 32 keys with the similar hashes are added to the tree, the ROOT has keys with hashes that are not similar (e.g. slot 0) and it splits NODE A without using a shortcut. When NODE A is filled with keys that all hashes are xxe6, the keys are similar, NODE A will split with a shortcut. Finally, it forms the tree as shown below, where slot 6 points to a shortcut. NODE A +------>+---+ ROOT | | 0 | xxe6 +---+ | +---+ xxxx | 0 | shortcut : : xxe6 +---+ | +---+ xxe6 : : | | | xxe6 +---+ | +---+ | 6 |---+ : : xxe6 +---+ +---+ xxe6 : : | f | xxe6 +---+ +---+ xxe6 | f | +---+ 4. As mentioned above, If a slot(slot 6) of the root points to a shortcut, it may be mistakenly transferred to a key*, leading to a read out-of-bounds read. To fix this issue, one should jump to descend_to_node if the ptr is a shortcut, regardless of whether the node is root or not. [1] https://lore.kernel.org/linux-kernel/1cfa878e-8c7b-4570-8606-21daf5e13ce7@huaweicloud.com/ [jarkko: tweaked the commit message a bit to have an appropriate closes tag.]

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix ucode out-of-bounds read warning Clear warning that read ucode[] may out-of-bounds.

In the Linux kernel, the following vulnerability has been resolved: HID: cougar: fix slab-out-of-bounds Read in cougar_report_fixup report_fixup for the Cougar 500k Gaming Keyboard was not verifying that the report descriptor size was correct before accessing it

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix mc_data out-of-bounds read warning Clear warning that read mc_data[i-1] may out-of-bounds.

In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Prevent out of bounds access in performance query extensions Check that the number of perfmons userspace is passing in the copy and reset extensions is not greater than the internal kernel storage where the ids will be copied into. (cherry picked from commit f32b5128d2c440368b5bf3a7a356823e235caabb)

In the Linux kernel, the following vulnerability has been resolved: sched: Fix out-of-bound access in uclamp Util-clamp places tasks in different buckets based on their clamp values for performance reasons. However, the size of buckets is currently computed using a rounding division, which can lead to an off-by-one error in some configurations. For instance, with 20 buckets, the bucket size will be 1024/20=51. A task with a clamp of 1024 will be mapped to bucket id 1024/51=20. Sadly, correct indexes are in range [0,19], hence leading to an out of bound memory access. Clamp the bucket id to fix the issue.

In the Linux kernel, the following vulnerability has been resolved: pinctrl: mediatek: fix global-out-of-bounds issue When eint virtual eint number is greater than gpio number, it maybe produce 'desc[eint_n]' size globle-out-of-bounds issue.