A vulnerability in the CLI of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, high-privileged, local attacker to perform a command injection attack. The vulnerability is due to insufficient input validation of command parameters in the CLI parser. An attacker could exploit this vulnerability by invoking a vulnerable CLI command with crafted malicious parameters. An exploit could allow the attacker to execute arbitrary commands with a non-root user account on the underlying Linux operating system of the affected device. Cisco Bug IDs: CSCvi09723.

Multiple vulnerabilities in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to gain access to the underlying Linux shell of an affected device and execute arbitrary commands with root privileges on the device. The vulnerabilities are due to the affected software improperly sanitizing command arguments to prevent access to internal data structures on a device. An attacker who has user EXEC mode (privilege level 1) access to an affected device could exploit these vulnerabilities on the device by executing CLI commands that contain crafted arguments. A successful exploit could allow the attacker to gain access to the underlying Linux shell of the affected device and execute arbitrary commands with root privileges on the device. Cisco Bug IDs: CSCtw85441, CSCus42252, CSCuv95370.

A vulnerability in the Sourcefire tunnel control channel protocol in Cisco Firepower System Software running on Cisco Firepower Threat Defense (FTD) sensors could allow an authenticated, local attacker to execute specific CLI commands with root privileges on the Cisco Firepower Management Center (FMC), or through Cisco FMC on other Firepower sensors and devices that are controlled by the same Cisco FMC. To send the commands, the attacker must have root privileges for at least one affected sensor or the Cisco FMC. The vulnerability exists because the affected software performs insufficient checks for certain CLI commands, if the commands are executed via a Sourcefire tunnel connection. An attacker could exploit this vulnerability by authenticating with root privileges to a Firepower sensor or Cisco FMC, and then sending specific CLI commands to the Cisco FMC or through the Cisco FMC to another Firepower sensor via the Sourcefire tunnel connection. A successful exploit could allow the attacker to modify device configurations or delete files on the device that is running Cisco FMC Software or on any Firepower device that is managed by Cisco FMC.

Multiple vulnerabilities in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to gain access to the underlying Linux shell of an affected device and execute arbitrary commands with root privileges on the device. The vulnerabilities are due to the affected software improperly sanitizing command arguments to prevent access to internal data structures on a device. An attacker who has user EXEC mode (privilege level 1) access to an affected device could exploit these vulnerabilities on the device by executing CLI commands that contain crafted arguments. A successful exploit could allow the attacker to gain access to the underlying Linux shell of the affected device and execute arbitrary commands with root privileges on the device. Cisco Bug IDs: CSCtw85441, CSCus42252, CSCuv95370.

A vulnerability in specific CLI commands for the Cisco Identity Services Engine (ISE) could allow an authenticated, local attacker to perform command injection to the underlying operating system or cause a hang or disconnect of the user session. The attacker needs valid administrator credentials for the device. The vulnerability is due to incomplete input validation of user input for certain CLI ISE configuration commands. An attacker could exploit this vulnerability by authenticating as an administrative user, issuing a specific CLI command, and entering crafted, malicious user input for the command parameters. An exploit could allow the attacker to perform command injection to the lower-level Linux operating system. It is also possible the attacker could cause the ISE user interface for this management session to hang or disconnect. Cisco Bug IDs: CSCvg95479.

Multiple vulnerabilities in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to inject arbitrary commands into the CLI of the affected software, which could allow the attacker to gain access to the underlying Linux shell of an affected device and execute commands with root privileges on the device. The vulnerabilities exist because the affected software does not sufficiently sanitize command arguments before passing commands to the Linux shell for execution. An attacker could exploit these vulnerabilities by submitting a malicious CLI command to the affected software. A successful exploit could allow the attacker to break from the CLI of the affected software, which could allow the attacker to gain access to the underlying Linux shell on an affected device and execute arbitrary commands with root privileges on the device. Cisco Bug IDs: CSCuz03145, CSCuz56419, CSCva31971, CSCvb09542.

A vulnerability in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to execute commands on the underlying Linux shell of an affected device with root privileges. The vulnerability exist because the affected software improperly sanitizes command arguments, failing to prevent access to certain internal data structures on an affected device. An attacker who has privileged EXEC mode (privilege level 15) access to an affected device could exploit these vulnerabilities on the device by executing CLI commands that contain custom arguments. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the affected device.

Juplink RX4-1500 v1.0.3 allows remote attackers to gain root access to the Linux subsystem via an unsanitized exec call (aka Command Line Injection), if the undocumented telnetd service is enabled and the attacker can authenticate as admin from the local network.

A vulnerability in the CLI of the Cisco StarOS operating system for Cisco ASR 5000 Series Aggregation Services Routers could allow an authenticated, local attacker to execute arbitrary commands with root privileges on an affected operating system. The vulnerability is due to insufficient validation of user-supplied input by the affected operating system. An attacker could exploit this vulnerability by authenticating to an affected system and injecting malicious arguments into a vulnerable CLI command. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the affected system. Cisco Bug IDs: CSCvg38807.

A argument injection vulnerability in the 'packet-trace' CLI command of Zyxel USG/ZyWALL series firmware versions 4.09 through 4.71, USG FLEX series firmware versions 4.50 through 5.21, ATP series firmware versions 4.32 through 5.21, VPN series firmware versions 4.30 through 5.21, NSG series firmware versions 1.00 through 1.33 Patch 4, NXC2500 firmware version 6.10(AAIG.3) and earlier versions, NAP203 firmware version 6.25(ABFA.7) and earlier versions, NWA50AX firmware version 6.25(ABYW.5) and earlier versions, WAC500 firmware version 6.30(ABVS.2) and earlier versions, and WAX510D firmware version 6.30(ABTF.2) and earlier versions, that could allow a local authenticated attacker to execute arbitrary OS commands by including crafted arguments to the CLI command.

Dell EMC PowerStore versions 2.0.0.x, 2.0.1.x, and 2.1.0.x are vulnerable to a command injection flaw. An authenticated attacker could potentially exploit this vulnerability, leading to the execution of arbitrary OS commands on the application's underlying OS, with the privileges of the vulnerable application. Exploitation may lead to a system takeover by an attacker.

A privilege escalation in the EdgeSwitch prior to version 1.7.1, an CGI script don't fully sanitize the user input resulting in local commands execution, allowing an operator user (Privilege-1) to escalate privileges and became administrator (Privilege-15).

A vulnerability has been identified in RUGGEDCOM RM1224 LTE(4G) EU (6GK6108-4AM00-2BA2) (All versions < V7.2.2), RUGGEDCOM RM1224 LTE(4G) NAM (6GK6108-4AM00-2DA2) (All versions < V7.2.2), SCALANCE M804PB (6GK5804-0AP00-2AA2) (All versions < V7.2.2), SCALANCE M812-1 ADSL-Router (6GK5812-1AA00-2AA2) (All versions < V7.2.2), SCALANCE M812-1 ADSL-Router (6GK5812-1BA00-2AA2) (All versions < V7.2.2), SCALANCE M816-1 ADSL-Router (6GK5816-1AA00-2AA2) (All versions < V7.2.2), SCALANCE M816-1 ADSL-Router (6GK5816-1BA00-2AA2) (All versions < V7.2.2), SCALANCE M826-2 SHDSL-Router (6GK5826-2AB00-2AB2) (All versions < V7.2.2), SCALANCE M874-2 (6GK5874-2AA00-2AA2) (All versions < V7.2.2), SCALANCE M874-3 (6GK5874-3AA00-2AA2) (All versions < V7.2.2), SCALANCE M876-3 (6GK5876-3AA02-2BA2) (All versions < V7.2.2), SCALANCE M876-3 (ROK) (6GK5876-3AA02-2EA2) (All versions < V7.2.2), SCALANCE M876-4 (6GK5876-4AA10-2BA2) (All versions < V7.2.2), SCALANCE M876-4 (EU) (6GK5876-4AA00-2BA2) (All versions < V7.2.2), SCALANCE M876-4 (NAM) (6GK5876-4AA00-2DA2) (All versions < V7.2.2), SCALANCE MUM853-1 (EU) (6GK5853-2EA00-2DA1) (All versions < V7.2.2), SCALANCE MUM856-1 (EU) (6GK5856-2EA00-3DA1) (All versions < V7.2.2), SCALANCE MUM856-1 (RoW) (6GK5856-2EA00-3AA1) (All versions < V7.2.2), SCALANCE S615 EEC LAN-Router (6GK5615-0AA01-2AA2) (All versions < V7.2.2), SCALANCE S615 LAN-Router (6GK5615-0AA00-2AA2) (All versions < V7.2.2). An Improper Neutralization of Special Elements used in an OS Command with root privileges vulnerability exists in the parsing of the IPSEC configuration. This could allow malicious local administrators to issue commands on system level after a new connection is established.

The bash_completion script for fscrypt allows injection of commands via crafted mountpoint paths, allowing privilege escalation under a specific set of circumstances. A local user who has control over mountpoint paths could potentially escalate their privileges if they create a malicious mountpoint path and if the system administrator happens to be using the fscrypt bash completion script to complete mountpoint paths. We recommend upgrading to version 0.3.3 or above

OS Command Injection vulnerability in the wirelessConnect handler of Abode iota All-In-One Security Kit allows an attacker to inject commands and gain root access. This issue affects: Abode iota All-In-One Security Kit versions prior to 1.0.2.23_6.9V_dev_t2_homekit_RF_2.0.19_s2_kvsABODE oz.

Dell PowerProtect DD, versions prior to 7.13.0.10, LTS 7.7.5.25, LTS 7.10.1.15, 6.2.1.110 on DDMC contain an OS command injection vulnerability in an admin operation. A local high privileged attacker could potentially exploit this vulnerability, leading to the execution of arbitrary OS commands on the managed system application's underlying OS with the privileges of the vulnerable application. Exploitation may lead to a system take over by an attacker on a managed system of DDMC.

Dell EMC PowerStore, contains an OS command injection Vulnerability. A locally authenticated attacker could potentially exploit this vulnerability, leading to the execution of arbitrary OS commands on the PowerStore underlying OS, with the privileges of the vulnerable application. Exploitation may lead to an elevation of privilege.

A vulnerability in the USB-modem code of Cisco IOS XE Software running on Cisco ASR 920 Series Aggregation Services Routers could allow an authenticated, local attacker to inject and execute arbitrary commands on the underlying operating system of an affected device. The vulnerability is due to improper input validation of the platform usb modem command in the CLI of the affected software. An attacker could exploit this vulnerability by modifying the platform usb modem command in the CLI of an affected device. A successful exploit could allow the attacker to inject and execute arbitrary commands on the underlying operating system of an affected device. Cisco Bug IDs: CSCve48949.

A vulnerability in the CLI of Cisco SD-WAN Software could allow an authenticated, local attacker to overwrite and possibly corrupt files on an affected system. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by injecting arbitrary commands that are executed as the root user account. A successful exploit could allow the attacker to overwrite arbitrary system files, which could result in a denial of service (DoS) condition.

A vulnerability in the CLI of Cisco Firepower Threat Defense (FTD) Software and Cisco FXOS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system as root. This vulnerability is due to improper input validation for specific CLI commands. An attacker could exploit this vulnerability by injecting operating system commands into a legitimate command. A successful exploit could allow the attacker to escape the restricted command prompt and execute arbitrary commands on the underlying operating system. To successfully exploit this vulnerability, an attacker would need valid Administrator credentials.

A command injection vulnerability has been reported to affect certain versions of Malware Remover. If exploited, this vulnerability allows remote attackers to execute arbitrary commands. This issue affects: QNAP Systems Inc. Malware Remover versions prior to 4.6.1.0. This issue does not affect: QNAP Systems Inc. Malware Remover 3.x.

A vulnerability in the processing of boot options of specific Cisco IOS XE Software switches could allow an authenticated, local attacker with root shell access to the underlying operating system (OS) to conduct a command injection attack during device boot. This vulnerability is due to insufficient input validation checks while processing boot options. An attacker could exploit this vulnerability by modifying device boot options to execute attacker-provided code. A successful exploit may allow an attacker to bypass the Secure Boot process and execute malicious code on an affected device with root-level privileges.

A command injection vulnerability in the protest binary allows an attacker with access to the remote command line interface to execute arbitrary commands as root.

A vulnerability in the CLI parsers of Cisco IOS Software for Cisco 809 and 829 Industrial Integrated Services Routers (Industrial ISRs) and Cisco 1000 Series Connected Grid Routers (CGR1000) could allow an authenticated, local attacker to execute arbitrary shell commands on the Virtual Device Server (VDS) of an affected device. The attacker must have valid user credentials at privilege level 15. The vulnerability is due to insufficient validation of arguments that are passed to specific VDS-related CLI commands. An attacker could exploit this vulnerability by authenticating to the targeted device and including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands in the context of the Linux shell of VDS with the privileges of the root user.

A vulnerability in Cisco IOS XE Software could allow an authenticated, local attacker to execute persistent code at boot time and break the chain of trust. This vulnerability is due to incorrect validations by boot scripts when specific ROM monitor (ROMMON) variables are set. An attacker could exploit this vulnerability by installing code to a specific directory in the underlying operating system (OS) and setting a specific ROMMON variable. A successful exploit could allow the attacker to execute persistent code on the underlying OS. To exploit this vulnerability, the attacker would need access to the root shell on the device or have physical access to the device.

Arbitrary Command Injection in GitHub repository strapi/strapi prior to 4.1.0.

A vulnerability in the CLI of Cisco FXOS Software could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation of commands supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input to the affected command. A successful exploit could allow the attacker to execute commands on the underlying operating system with root privileges.

A vulnerability in the CLI of Cisco StarOS operating system for Cisco ASR 5000 Series Routers could allow an authenticated, local attacker to elevate privileges on an affected device. The vulnerability is due to insufficient input validation of CLI commands. An attacker could exploit this vulnerability by sending crafted commands to the CLI. A successful exploit could allow the attacker to execute arbitrary code with the privileges of the root user. To exploit this vulnerability, an attacker would need to have valid administrative credentials on an affected device.

An issue was discovered in ClusterLabs crmsh through 4.2.1. Local attackers able to call "crm history" (when "crm" is run) were able to execute commands via shell code injection to the crm history commandline, potentially allowing escalation of privileges.

A vulnerability in the CLI of Cisco FXOS Software could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation of commands supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input to the affected command. A successful exploit could allow the attacker to execute commands on the underlying operating system with root privileges.

A vulnerability in the CLI of Cisco StarOS operating system for Cisco ASR 5000 Series Routers could allow an authenticated, local attacker to elevate privileges on an affected device. The vulnerability is due to insufficient input validation of CLI commands. An attacker could exploit this vulnerability by sending crafted commands to the CLI. A successful exploit could allow the attacker to execute arbitrary code with the privileges of the root user on the affected device. To exploit this vulnerability, an attacker would need to have valid credentials on an affected device and know the password for the cli test-commands command.

A vulnerability in the CLI of Cisco IOS XE Software could allow an authenticated, local attacker to inject a command to the underlying operating system that will execute with root privileges upon the next reboot of the device. The authenticated user must have privileged EXEC permissions on the device. The vulnerability is due to insufficient protection of values passed to a script that executes during device startup. An attacker could exploit this vulnerability by writing values to a specific file. A successful exploit could allow the attacker to execute commands with root privileges each time the affected device is restarted.

An improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiSandbox version 4.4.0 through 4.4.2 and 4.2.0 through 4.2.6 and 4.0.0 through 4.0.5 and 3.2.0 through 3.2.4 and 3.0.5 through 3.0.7 may allows attacker to execute unauthorized code or commands via CLI.

A vulnerability in the local management (local-mgmt) CLI of Cisco FXOS Software and Cisco UCS Manager Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system (OS) of an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by including crafted arguments to specific commands. A successful exploit could allow the attacker to execute arbitrary commands on the underlying OS with the privileges of the currently logged-in user for all affected platforms excluding Cisco UCS 6400 Series Fabric Interconnects. On Cisco UCS 6400 Series Fabric Interconnects, the injected commands are executed with root privileges.

A vulnerability in Cisco Remote PHY Device Software could allow an authenticated, local attacker to execute commands on the underlying Linux shell of an affected device with root privileges. The vulnerability exists because the affected software does not properly sanitize user-supplied input. An attacker who has valid administrator access to an affected device could exploit this vulnerability by supplying certain CLI commands with crafted arguments. A successful exploit could allow the attacker to run arbitrary commands as the root user, which could result in a complete system compromise.

A vulnerability in the CLI of Cisco FXOS Software and Cisco UCS Manager Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system (OS). The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by including crafted arguments to specific commands. A successful exploit could allow the attacker to execute arbitrary commands on the underlying OS with the privileges of the currently logged-in user for all affected platforms excluding Cisco UCS 6400 Series Fabric Interconnects. On Cisco UCS 6400 Series Fabric Interconnects, the injected commands are executed with root privileges.

A vulnerability in the local management (local-mgmt) CLI of Cisco UCS Manager Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system (OS) on an affected device. The vulnerability is due to insufficient input validation of command arguments. An attacker could exploit this vulnerability by including crafted arguments to specific commands on the local management CLI. A successful exploit could allow the attacker to execute arbitrary commands on the underlying OS with the privileges of the currently logged-in user for all affected platforms excluding Cisco UCS 6400 Series Fabric Interconnects. On Cisco UCS 6400 Series Fabric Interconnects, the injected commands are executed with root privileges.

Dell EMC PowerStore versions prior to 1.0.3.0.5.006 contain an OS Command Injection vulnerability in PowerStore X environment . A locally authenticated attacker could potentially exploit this vulnerability, leading to the execution of arbitrary OS command on the PowerStore underlying OS. Exploiting may lead to a system take over by an attacker.

A vulnerability in the CLI of Cisco FXOS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying Linux operating system with a privilege level of root on an affected device. The vulnerability is due to insufficient validation of arguments passed to a specific CLI command on the affected device. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system with root privileges. An attacker would need valid administrator credentials to exploit this vulnerability.

A command injection issue in dji_sys in DJI Mavic 2 Remote Controller before firmware version 01.00.0510 allows for code execution via a malicious firmware upgrade packet.

An issue was discovered in Pi-Hole through 5.0. The local www-data user has sudo privileges to execute the pihole core script as root without a password, which could allow an attacker to obtain root access via shell metacharacters to this script's setdns command.

The CLI command parser on Cisco RV110W, RV130W, and RV215W devices allows local users to execute arbitrary shell commands as an administrator via crafted parameters, aka Bug IDs CSCuv90134, CSCux58161, and CSCux73567.

yast2-backup 2.14.2 through 2.16.6 on SUSE Linux and Novell Linux allows local users to gain privileges via shell metacharacters in filenames used by the backup process.

VMware NSX Edge contains a CLI shell injection vulnerability. A malicious actor with SSH access to an NSX-Edge appliance can execute arbitrary commands on the operating system as root.