A vulnerability in the handling of Inter-Access Point Protocol (IAPP) messages by Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition. The vulnerability exist because the software improperly validates input on fields within IAPP messages. An attacker could exploit the vulnerability by sending malicious IAPP messages to an affected device. A successful exploit could allow the attacker to cause the Cisco WLC Software to reload, resulting in a DoS condition. Software versions prior to 8.2.170.0, 8.5.150.0, and 8.8.100.0 are affected.

A vulnerability in the Easy Virtual Switching System (VSS) of Cisco IOS XE Software on Catalyst 4500 Series Switches could allow an unauthenticated, adjacent attacker to cause the switches to reload. The vulnerability is due to incomplete error handling when processing Cisco Discovery Protocol (CDP) packets used with the Easy Virtual Switching System. An attacker could exploit this vulnerability by sending a specially crafted CDP packet. An exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition.

A vulnerability in the handling of Inter-Access Point Protocol (IAPP) messages by Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition. The vulnerability exist because the software improperly validates input on fields within IAPP messages. An attacker could exploit the vulnerability by sending malicious IAPP messages to an affected device. A successful exploit could allow the attacker to cause the Cisco WLC Software to reload, resulting in a DoS condition. Software versions prior to 8.2.170.0, 8.5.150.0, and 8.8.100.0 are affected.

A vulnerability in the 802.1X implementation for Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to incomplete input validation of Extensible Authentication Protocol over LAN (EAPOL) frames. An attacker could exploit this vulnerability by sending a crafted EAPOL frame to an interface on the targeted device. A successful exploit could allow the attacker to cause the Layer 2 (L2) forwarding process to restart multiple times, leading to a system-level restart of the device and a DoS condition. Note: This vulnerability affects only NX-OS devices configured with 802.1X functionality. Cisco Nexus 1000V Switch for VMware vSphere devices are affected in versions prior to 5.2(1)SV3(1.4b). Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I7(4). Nexus 3500 Platform Switches are affected in versions prior to 7.0(3)I7(4). Nexus 2000, 5500, 5600, and 6000 Series Switches are affected in versions prior to 7.3(5)N1(1) and 7.1(5)N1(1b). Nexus 7000 and 7700 Series Switches are affected in versions prior to 8.2(3). Nexus 9000 Series Fabric Switches in ACI Mode are affected in versions prior to 13.2(1l). Nexus 9000 Series Switches in Standalone NX-OS Mode are affected in versions prior to 7.0(3)I7(4).

A vulnerability in the Fibre Channel over Ethernet (FCoE) protocol implementation in Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to an incorrect allocation of an internal interface index. An adjacent attacker with the ability to submit a crafted FCoE packet that crosses affected interfaces could trigger this vulnerability. A successful exploit could allow the attacker to cause a packet loop and high throughput on the affected interfaces, resulting in a DoS condition. This vulnerability has been fixed in version 7.3(5)N1(1).

A vulnerability in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol implementation of Cisco Aironet and Catalyst 9100 Access Points (APs) could allow an unauthenticated, adjacent attacker to cause an affected device to restart unexpectedly, resulting in a denial of service (DoS) condition. The vulnerability is due to improper resource management during CAPWAP message processing. An attacker could exploit this vulnerability by sending a high volume of legitimate wireless management frames within a short time to an affected device. A successful exploit could allow the attacker to cause a device to restart unexpectedly, resulting in a DoS condition for clients associated with the AP.

Cisco Wireless LAN Controller (WLC) devices with software 7.4(1.1) allow remote attackers to cause a denial of service (wireless-networking outage) via crafted TCP traffic on the local network, aka Bug ID CSCug67104.

A vulnerability in the Fibre Channel over Ethernet (FCoE) N-port Virtualization (NPV) protocol implementation in Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition. The vulnerability is due to an incorrect processing of FCoE packets when the fcoe-npv feature is uninstalled. An attacker could exploit this vulnerability by sending a stream of FCoE frames from an adjacent host to an affected device. An exploit could allow the attacker to cause packet amplification to occur, resulting in the saturation of interfaces and a DoS condition. Nexus 9000 Series Switches in Standalone NX-OS Mode are affected running software versions prior to 7.0(3)I7(5) and 9.2(2).

Cisco IOS 12.1T, 12.2, 12.2T, 12.3 and 12.3T, with Multi Protocol Label Switching (MPLS) installed but disabled, allows remote attackers to cause a denial of service (device reload) via a crafted packet sent to the disabled interface.

A vulnerability in the Layer 2 punt code of Cisco IOS XR Software running on Cisco ASR 9000 Series Aggregation Services Routers could allow an unauthenticated, adjacent attacker to cause the affected line card to reboot. This vulnerability is due to incorrect handling of specific Ethernet frames that cause a spin loop that can make the network processors unresponsive. An attacker could exploit this vulnerability by sending specific types of Ethernet frames on the segment where the affected line cards are attached. A successful exploit could allow the attacker to cause the affected line card to reboot.

The Ethernet Connectivity Fault Management (CFM) handling feature in Cisco IOS 12.2(33)SRE9a and earlier and IOS XE 3.13S and earlier allows remote attackers to cause a denial of service (device reload) via malformed CFM packets, aka Bug ID CSCuq93406.

A vulnerability in Cisco access point (AP) software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient validation of certain parameters within 802.11 frames. An attacker could exploit this vulnerability by sending a wireless 802.11 association request frame with crafted parameters to an affected device. A successful exploit could allow the attacker to cause an unexpected reload of an affected device, resulting in a DoS condition.

A vulnerability in the PROFINET feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to cause an affected device to crash and reload, resulting in a denial of service (DoS) condition on the device. The vulnerability is due to insufficient processing logic for crafted PROFINET packets that are sent to an affected device. An attacker could exploit this vulnerability by sending crafted PROFINET packets to an affected device for processing. A successful exploit could allow the attacker to cause the device to crash and reload, resulting in a DoS condition on the device.

The Cisco Wireless LAN Controller (WLC), Cisco Catalyst 6500 Wireless Services Module (WiSM), and Cisco Catalyst 3750 Integrated Wireless LAN Controller with software 4.x before 4.2.176.0 and 5.x before 5.2 allow remote attackers to cause a denial of service (web authentication outage or device reload) via unspecified network traffic, as demonstrated by a vulnerability scanner.

A vulnerability in the Open Shortest Path First (OSPF) implementation of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, adjacent attacker to cause a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability exists because the affected software improperly parses certain options in OSPF link-state advertisement (LSA) type 11 packets. An attacker could exploit this vulnerability by sending a crafted LSA type 11 OSPF packet to an affected device. A successful exploit could allow the attacker to cause a reload of the affected device, resulting in a DoS condition for client traffic that is traversing the device.

A vulnerability in the PROFINET handler for Link Layer Discovery Protocol (LLDP) messages of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to cause a crash on an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient validation of LLDP messages in the PROFINET LLDP message handler. An attacker could exploit this vulnerability by sending a malicious LLDP message to an affected device. A successful exploit could allow the attacker to cause the affected device to reload.

A vulnerability in the WLAN Local Profiling feature of Cisco IOS XE Wireless Controller Software for the Cisco Catalyst 9000 Family could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to incorrect parsing of HTTP packets while performing HTTP-based endpoint device classifications. An attacker could exploit this vulnerability by sending a crafted HTTP packet to an affected device. A successful exploit could cause an affected device to reboot, resulting in a DoS condition.

Multiple vulnerabilities in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Software for Cisco Catalyst 9800 Series Wireless Controllers could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition of an affected device. These vulnerabilities are due to insufficient validation of CAPWAP packets. An attacker could exploit these vulnerabilities by sending a malformed CAPWAP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition on the affected device.

A vulnerability in the implementation of Cisco Discovery Protocol functionality in Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to exhaust memory on an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to improper memory handling by the affected software when the software processes high rates of Cisco Discovery Protocol packets that are sent to a device. An attacker could exploit this vulnerability by sending a high rate of Cisco Discovery Protocol packets to an affected device. A successful exploit could allow the attacker to exhaust memory on the affected device, resulting in a DoS condition.

The Aggregated MAC Protocol Data Unit (AMPDU) implementation on Cisco Aironet 1800, 2800, and 3800 devices with software before 8.2.121.0 and 8.3.x before 8.3.102.0 allows remote attackers to cause a denial of service (device reload) via a crafted AMPDU header, aka Bug ID CSCuz56288.

The Adaptive Wireless Intrusion Prevention System (wIPS) feature on Cisco Wireless LAN Controller (WLC) devices before 8.0.140.0, 8.1.x and 8.2.x before 8.2.121.0, and 8.3.x before 8.3.102.0 allows remote attackers to cause a denial of service (device restart) via a malformed wIPS packet, aka Bug ID CSCuz40263.

The DHCP Relay implementation in Cisco Adaptive Security Appliance (ASA) Software 8.4.7.29 and 9.1.7.4 allows remote attackers to cause a denial of service (interface wedge) via a crafted rate of DHCP packet transmission, aka Bug ID CSCuy66942.

A vulnerability in Cisco IOS on Catalyst Switches and Nexus 9300 Series Switches could allow an unauthenticated, adjacent attacker to cause a Layer 2 network storm. More Information: CSCuu69332, CSCux07028. Known Affected Releases: 15.2(3)E. Known Fixed Releases: 12.2(50)SE4 12.2(50)SE5 12.2(50)SQ5 12.2(50)SQ6 12.2(50)SQ7 12.2(52)EY4 12.2(52)SE1 12.2(53)EX 12.2(53)SE 12.2(53)SE1 12.2(53)SE2 12.2(53)SG10 12.2(53)SG11 12.2(53)SG2 12.2(53)SG9 12.2(54)SG1 12.2(55)EX3 12.2(55)SE 12.2(55)SE1 12.2(55)SE10 12.2(55)SE2 12.2(55)SE3 12.2(55)SE4 12.2(55)SE5 12.2(55)SE6 12.2(55)SE7 12.2(55)SE8 12.2(55)SE9 12.2(58)EZ 12.2(58)SE1 12.2(58)SE2 12.2(60)EZ 12.2(60)EZ1 12.2(60)EZ2 12.2(60)EZ3 12.2(60)EZ4 12.2(60)EZ5 12.2(60)EZ6 12.2(60)EZ7 12.2(60)EZ8 15.0(1)EY2 15.0(1)SE 15.0(1)SE2 15.0(1)SE3 15.0(2)EA 15.0(2)EB 15.0(2)EC 15.0(2)ED 15.0(2)EH 15.0(2)EJ 15.0(2)EJ1 15.0(2)EK1 15.0(2)EX 15.0(2)EX1 15.0(2)EX3 15.0(2)EX4 15.0(2)EX5 15.0(2)EY 15.0(2)EY1 15.0(2)EY2 15.0(2)EZ 15.0(2)SE 15.0(2)SE1 15.0(2)SE2 15.0(2)SE3 15.0(2)SE4 15.0(2)SE5 15.0(2)SE6 15.0(2)SE7 15.0(2)SE9 15.0(2)SG10 15.0(2)SG3 15.0(2)SG6 15.0(2)SG7 15.0(2)SG8 15.0(2)SG9 15.0(2a)EX5 15.1(2)SG 15.1(2)SG1 15.1(2)SG2 15.1(2)SG3 15.1(2)SG4 15.1(2)SG5 15.1(2)SG6 15.2(1)E 15.2(1)E1 15.2(1)E2 15.2(1)E3 15.2(1)EY 15.2(2)E 15.2(2)E3 15.2(2b)E.

Multiple vulnerabilities in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Software for Cisco Catalyst 9800 Series Wireless Controllers could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition of an affected device. These vulnerabilities are due to insufficient validation of CAPWAP packets. An attacker could exploit these vulnerabilities by sending a malformed CAPWAP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition on the affected device.

Multiple vulnerabilities in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Software for Cisco Catalyst 9800 Series Wireless Controllers could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition of an affected device. These vulnerabilities are due to insufficient validation of CAPWAP packets. An attacker could exploit these vulnerabilities by sending a malformed CAPWAP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition on the affected device.

A vulnerability in the ARP packet processing of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 2100 Series Security Appliances could allow an unauthenticated, adjacent attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition on an affected device. The vulnerability is due to incorrect processing of ARP packets received by the management interface of an affected device. An attacker could exploit this vulnerability by sending a series of unicast ARP packets in a short timeframe that would reach the management interface of an affected device. A successful exploit could allow the attacker to consume resources on an affected device, which would prevent the device from sending internal system keepalives and eventually cause the device to reload, resulting in a denial of service (DoS) condition.

Multiple vulnerabilities in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Software for Cisco Catalyst 9800 Series Wireless Controllers could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition of an affected device. These vulnerabilities are due to insufficient validation of CAPWAP packets. An attacker could exploit these vulnerabilities by sending a malformed CAPWAP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition on the affected device.

Multiple vulnerabilities in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Software for Cisco Catalyst 9800 Series Wireless Controllers could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition of an affected device. These vulnerabilities are due to insufficient validation of CAPWAP packets. An attacker could exploit these vulnerabilities by sending a malformed CAPWAP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition on the affected device.

A vulnerability in the segment routing feature for the Intermediate System-to-Intermediate System (IS-IS) protocol of Cisco IOS XR Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient input validation of ingress IS-IS packets. An attacker could exploit this vulnerability by sending specific IS-IS packets to an affected device after forming an adjacency. A successful exploit could allow the attacker to cause the IS-IS process on all affected devices that are participating in the Flexible Algorithm to crash and restart, resulting in a DoS condition. Note: The IS-IS protocol is a routing protocol. To exploit this vulnerability, an attacker must be Layer 2-adjacent to the affected device and must have formed an adjacency. This vulnerability affects segment routing for IS-IS over IPv4 and IPv6 control planes as well as devices that are configured as level 1, level 2, or multi-level routing IS-IS type.

A vulnerability in the Intermediate System-to-Intermediate System (IS-IS) protocol of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient input validation when parsing an ingress IS-IS packet. An attacker could exploit this vulnerability by sending a crafted IS-IS packet to an affected device after forming an adjacency. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. Note: The IS-IS protocol is a routing protocol. To exploit this vulnerability, an attacker must be Layer 2-adjacent to the affected device and have formed an adjacency.

Multiple vulnerabilities in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Software for Cisco Catalyst 9800 Series Wireless Controllers could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition of an affected device. These vulnerabilities are due to insufficient validation of CAPWAP packets. An attacker could exploit these vulnerabilities by sending a malformed CAPWAP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition on the affected device.

A vulnerability in Cisco IOS Software for Cisco Catalyst 6000 Series Switches could allow an unauthenticated, adjacent attacker to cause an affected device to reload unexpectedly. This vulnerability is due to improper handling of process-switched traffic. An attacker could exploit this vulnerability by sending crafted traffic to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition.

A vulnerability in the multicast DNS (mDNS) gateway feature of Cisco IOS XE Software for Wireless LAN Controllers (WLCs) could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition. This vulnerability is due to improper management of mDNS client entries. An attacker could exploit this vulnerability by connecting to the wireless network and sending a continuous stream of specific mDNS packets. A successful exploit could allow the attacker to cause the wireless controller to have high CPU utilization, which could lead to access points (APs) losing their connection to the controller and result in a DoS condition.

A vulnerability in the handling of specific Ethernet frames by Cisco IOS XR Software for various Cisco Network Convergence System (NCS) platforms could allow an unauthenticated, adjacent attacker to cause critical priority packets to be dropped, resulting in a denial of service (DoS) condition. This vulnerability is due to incorrect classification of certain types of Ethernet frames that are received on an interface. An attacker could exploit this vulnerability by sending specific types of Ethernet frames to or through the affected device. A successful exploit could allow the attacker to cause control plane protocol relationships to fail, resulting in a DoS condition. For more information, see the section of this advisory. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.

Cisco Wireless LAN Controller (WLC) devices 7.4(121.0) and 8.0(0.30220.385) allow remote attackers to cause a denial of service via crafted wireless management frames, aka Bug ID CSCun92979.

Cisco Videoscape Session Resource Manager (VSRM) allows remote attackers to cause a denial of service (device restart) by sending a traffic flood to upstream devices, aka Bug ID CSCva01813.

Cisco Nexus 1000v Application Virtual Switch (AVS) devices before 5.2(1)SV3(1.5i) allow remote attackers to cause a denial of service (ESXi hypervisor crash and purple screen) via a crafted Cisco Discovery Protocol packet that triggers an out-of-bounds memory access, aka Bug ID CSCuw57985.

A vulnerability in the integrated wireless access point (AP) packet processing of the Cisco 1000 Series Connected Grid Router (CGR1K) could allow an unauthenticated, adjacent attacker to cause a denial of service condition on an affected device. This vulnerability is due to insufficient input validation of received traffic. An attacker could exploit this vulnerability by sending crafted traffic to an affected device. A successful exploit could allow the attacker to cause the integrated AP to stop processing traffic, resulting in a DoS condition. It may be necessary to manually reload the CGR1K to restore AP operation.

A vulnerability in the 802.11 association frame validation of Cisco Catalyst 9100 Series Access Points (APs) could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient input validation of certain parameters within association request frames received by the AP. An attacker could exploit this vulnerability by sending a crafted 802.11 association request to a nearby device. An exploit could allow the attacker to unexpectedly reload the device, resulting in a DoS condition.

A vulnerability in the 802.11r Fast Transition feature set of Cisco IOS Access Points (APs) Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to a corruption of certain timer mechanisms triggered by specific roaming events. This corruption will eventually cause a timer crash. An attacker could exploit this vulnerability by sending malicious reassociation events multiple times to the same AP in a short period of time, causing a DoS condition on the affected AP.

A vulnerability in the Cisco Discovery Protocol (formerly known as CDP) subsystem of devices running, or based on, Cisco NX-OS Software contain a vulnerability that could allow an unauthenticated, adjacent attacker to create a denial of service (DoS) condition. The vulnerability is due to a failure to properly validate certain fields within a Cisco Discovery Protocol message prior to processing it. An attacker with the ability to submit a Cisco Discovery Protocol message designed to trigger the issue could cause a DoS condition on an affected device while the device restarts. This vulnerability affects Firepower 4100 Series Next-Generation Firewall, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Director Switches, Nexus 1000V Series Switches, Nexus 1100 Series Cloud Services Platforms, Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvc89242, CSCve40943, CSCve40953, CSCve40965, CSCve40970, CSCve40978, CSCve40992, CSCve41000, CSCve41007.

A vulnerability in the implementation of the cluster feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to trigger a denial of service (DoS) condition on an affected device. The vulnerability is due to improper input validation when handling Cluster Management Protocol (CMP) messages. An attacker could exploit this vulnerability by sending a malicious CMP message to an affected device. A successful exploit could allow the attacker to cause the switch to crash and reload or to hang, resulting in a DoS condition. If the switch hangs it will not reboot automatically, and it will need to be power cycled manually to recover.

A vulnerability in the Open Shortest Path First version 3 (OSPFv3) implementation in Cisco IOS and IOS XE Software could allow an unauthenticated, adjacent attacker to cause an affected device to reload. The vulnerability is due to incorrect handling of specific OSPFv3 packets. An attacker could exploit this vulnerability by sending crafted OSPFv3 Link-State Advertisements (LSA) to an affected device. An exploit could allow the attacker to cause an affected device to reload, leading to a denial of service (DoS) condition.

The ARP implementation in Cisco NX-OS on Nexus 1000V devices for VMware vSphere 5.2(1)SV3(1.4), Nexus 3000 devices 7.3(0)ZD(0.47), Nexus 4000 devices 4.1(2)E1, Nexus 9000 devices 7.3(0)ZD(0.61), and MDS 9000 devices 7.0(0)HSK(0.353) and SAN-OS NX-OS on MDS 9000 devices 7.0(0)HSK(0.353) allows remote attackers to cause a denial of service (ARP process restart) via crafted packet-header fields, aka Bug ID CSCut25292.