NETGEAR R7800 devices before 1.0.2.60 are affected by command injection by an authenticated user.

NETGEAR R7800 devices before 1.0.2.60 are affected by command injection by an authenticated user.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-1935 1.03 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the handling of SetStaticRouteIPv4Settings requests to the web management portal. When parsing subelements within the StaticRouteIPv4Data element, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-16147.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D7800 before 1.0.1.34, DM200 before 1.0.0.50, R6100 before 1.0.1.22, R7500 before 1.0.0.122, R7500v2 before 1.0.3.26, and R7800 before 1.0.2.42.

Aterm SA3500G firmware versions prior to Ver. 3.5.9 allows an attacker with an administrative privilege to send a specially crafted request to a specific URL, which may result in an arbitrary command execution.

A vulnerability in Cisco IOS XE Software could allow an authenticated, local attacker to execute persistent code at boot time and break the chain of trust. This vulnerability is due to incorrect validations by boot scripts when specific ROM monitor (ROMMON) variables are set. An attacker could exploit this vulnerability by installing code to a specific directory in the underlying operating system (OS) and setting a specific ROMMON variable. A successful exploit could allow the attacker to execute persistent code on the underlying OS. To exploit this vulnerability, the attacker would need access to the root shell on the device or have physical access to the device.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-1935 1.03 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the handling of SetVirtualServerSettings requests to the web management portal. When parsing subelements within the VirtualServerInfo element, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-16151.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-1935 1.03 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the handling of SetIPv4FirewallSettings requests to the web management portal. When parsing subelements within the IPv4FirewallRule element, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-16146.

A vulnerability has been found in Legrand SMS PowerView 1.x and classified as critical. Affected by this vulnerability is an unknown functionality. The manipulation of the argument redirect leads to os command injection. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Gemalto DS3 Authentication Server 2.6.1-SP01 allows OS Command Injection.

A vulnerability has been found in pedroetb tts-api up to 2.1.4 and classified as critical. This vulnerability affects the function onSpeechDone of the file app.js. The manipulation leads to os command injection. Upgrading to version 2.2.0 is able to address this issue. The patch is identified as 29d9c25415911ea2f8b6de247cb5c4607d13d434. It is recommended to upgrade the affected component. VDB-248278 is the identifier assigned to this vulnerability.

A vulnerability was found in kodbox 1.26. It has been declared as critical. This vulnerability affects the function Execute of the file webconsole.php.txt of the component WebConsole Plug-In. The manipulation leads to os command injection. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-233476. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

In Splunk Enterprise versions below 9.4.3, 9.3.5, 9.2.7, and 9.1.10, a user who holds a role that contains the high-privilege capability `edit_scripted` and `list_inputs` capability , could perform a remote command execution due to improper user input sanitization on the scripted input files.<br><br>See [Define roles on the Splunk platform with capabilities](https://docs.splunk.com/Documentation/Splunk/latest/Security/Rolesandcapabilities) and [Setting up a scripted input ](https://docs.splunk.com/Documentation/Splunk/9.4.2/AdvancedDev/ScriptSetup)for more information.

A post-authentication command injection vulnerability in the CGI program in the Zyxel GS1900-48 switch firmware version V2.80(AAHN.1)C0 and earlier could allow an authenticated, LAN-based attacker with administrator privileges to execute some operating system (OS) commands on an affected device by sending a crafted HTTP request.

TOTOLINK X5000R V9.1.0cu.2350_B20230313 was discovered to contain an OS command injection vulnerability via the "week" parameter in setWiFiScheduleCfg.

TOTOLINK X5000R V9.1.0cu.2350_B20230313 was discovered to contain an OS command injection vulnerability via the "desc" parameter in setWiFiScheduleCfg.

TOTOLINK X5000R V9.1.0cu.2350_B20230313 was discovered to contain an OS command injection vulnerability via the "eMinute" parameter in setWiFiScheduleCfg.

Improper Input Validation vulnerability of Authenticated User in Progress LoadMaster allows : OS Command Injection. This issue affects:  Product Affected Versions LoadMaster From 7.2.55.0 to 7.2.60.1 (inclusive)    From 7.2.49.0 to 7.2.54.12 (inclusive)    7.2.48.12 and all prior versions ECS All prior versions to 7.2.60.1 (inclusive)

Multiple authenticated operating system (OS) command injection vulnerabilities exist in Firewalla Box Software versions before 1.979. A physically close attacker that is authenticated to the Bluetooth Low-Energy (BTLE) interface can use the network configuration service to inject commands in various configuration parameters including networkConfig.Interface.Phy.Eth0.Extra.PingTestIP, networkConfig.Interface.Phy.Eth0.Extra.DNSTestDomain, and networkConfig.Interface.Phy.Eth0.Gateway6. Additionally, because the configuration can be synced to the Firewalla cloud, the attacker may be able to persist access even after hardware resets and firmware re-flashes.

TOTOLINK A6000R V1.0.1-B20201211.2000 was discovered to contain a command injection vulnerability via the iface parameter in the vif_disable function.

DrayTek Vigor3910 devices through 4.3.2.6 are affected by an OS command injection vulnerability that allows an attacker to leverage the recvCmd binary to escape from the emulated instance and inject arbitrary commands into the host machine.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D7800 before 1.0.1.28, R6700 before 1.0.1.44, R6900 before 1.0.1.44, R7000 before 1.0.9.28, R7500v2 before 1.0.3.24, R7800 before 1.0.2.38, R9000 before 1.0.2.52, WNDR4300v2 before 1.0.0.50, and WNDR4500v3 before 1.0.0.50.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D7000 before 1.0.1.60, D7800 before 1.0.1.34, D8500 before 1.0.3.39, R6700 before 1.0.1.30, R6700v2 before 1.2.0.16, R6800 before 1.2.0.16, R6900 before 1.0.1.30, R6900P before 1.2.0.22, R6900v2 before 1.2.0.16, R7000 before 1.0.9.12, R7000P before 1.2.0.22, R7500v2 before 1.0.3.20, R7800 before 1.0.2.44, R8300 before 1.0.2.106, R8500 before 1.0.2.106, and R9000 before 1.0.2.52.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D7800 before 1.0.1.34, R7500v2 before 1.0.3.26, R7800 before 1.0.2.42, R8900 before 1.0.3.10, R9000 before 1.0.3.10, WNDR4300v2 before 1.0.0.54, and WNDR4500v3 before 1.0.0.54.

NETGEAR R7800 devices before 1.0.2.60 are affected by command injection by an authenticated user.

NETGEAR R7800 devices before 1.0.2.60 are affected by command injection by an authenticated user.

NETGEAR R7800 devices before 1.0.2.60 are affected by command injection by an authenticated user.

NETGEAR R7800 devices before 1.0.2.60 are affected by command injection by an authenticated user.

In TOTOLINK X5000r v9.1.0cu.2350_b20230313, the file /cgi-bin/cstecgi.cgi contains an OS command injection vulnerability in setLedCfg. Authenticated Attackers can send malicious packet to execute arbitrary commands.

NETGEAR R7800 devices before 1.0.2.60 are affected by command injection by an authenticated user.

NETGEAR R7800 devices before 1.0.2.60 are affected by command injection by an authenticated user.

NETGEAR R7800 devices before 1.0.2.60 are affected by command injection by an authenticated user.

NETGEAR R7800 devices before 1.0.2.60 are affected by command injection by an authenticated user.

NETGEAR R7800 devices before 1.0.2.60 are affected by command injection by an authenticated user.

WNC01WH firmware 1.0.0.9 and earlier allows authenticated attackers to execute arbitrary OS commands via unspecified vectors.

An issue in TOTOLINK-CX-A3002RU V1.0.4-B20171106.1512 and TOTOLINK-CX-N150RT V2.1.6-B20171121.1002 and TOTOLINK-CX-N300RT V2.1.6-B20170724.1420 and TOTOLINK-CX-N300RT V2.1.8-B20171113.1408 and TOTOLINK-CX-N300RT V2.1.8-B20191010.1107 and TOTOLINK-CX-N302RE V2.0.2-B20170511.1523 allows a remote attacker to execute arbitrary code via the /boafrm/formSysCmd component.

A vulnerability was found in ONS Digital RAS Collection Instrument up to 2.0.27 and classified as critical. Affected by this issue is the function jobs of the file .github/workflows/comment.yml. The manipulation of the argument $COMMENT_BODY leads to os command injection. Upgrading to version 2.0.28 is able to address this issue. The name of the patch is dcaad2540f7d50c512ff2e031d3778dd9337db2b. It is recommended to upgrade the affected component. The identifier of this vulnerability is VDB-234248.