D-link DIR-816 A2_v1.10CNB04.img reboots the router without authentication via /goform/doReboot. No authentication is required, and reboot is executed when the function returns at the end.

D-Link DIR-619 Ax v1.00 was discovered to contain a stack overflow in the function formSetWanPPPoE. This vulnerability allows attackers to cause a Denial of Service (DoS) via the curTime parameter.

D-Link DIR-619 Ax v1.00 was discovered to contain a stack overflow in the function formdumpeasysetup. This vulnerability allows attackers to cause a Denial of Service (DoS) via the config.save_network_enabled parameter.

D-Link DIR-619 Ax v1.00 was discovered to contain a stack overflow in the function formWlanWizardSetup. This vulnerability allows attackers to cause a Denial of Service (DoS) via the webpage parameter.

D-Link DIR-619 Ax v1.00 was discovered to contain a stack overflow in the function formSetWanDhcpplus. This vulnerability allows attackers to cause a Denial of Service (DoS) via the curTime parameter.

D-Link DIR-619 Ax v1.00 was discovered to contain a stack overflow in the function formAdvanceSetup. This vulnerability allows attackers to cause a Denial of Service (DoS) via the webpage parameter.

D-Link DIR-619 Ax v1.00 was discovered to contain a stack overflow in the function formSetWanPPTP. This vulnerability allows attackers to cause a Denial of Service (DoS) via the curTime parameter.

On D-Link DIR-823G 2018-09-19 devices, the GoAhead configuration allows /HNAP1 RunReboot commands without authentication to trigger a reboot.

D-Link DIR-619 Ax v1.00 was discovered to contain a stack overflow in the function formLanguageChange. This vulnerability allows attackers to cause a Denial of Service (DoS) via the nextPage parameter.

D-Link DIR-619 Ax v1.00 was discovered to contain a stack overflow in the function formSetWanNonLogin. This vulnerability allows attackers to cause a Denial of Service (DoS) via the curTime parameter.

D-Link DIR-619 Ax v1.00 was discovered to contain a stack overflow in the function formSetWanL2TP. This vulnerability allows attackers to cause a Denial of Service (DoS) via the curTime parameter.

D-Link DIR-619 Ax v1.00 was discovered to contain a stack overflow in the function formWlanSetup. This vulnerability allows attackers to cause a Denial of Service (DoS) via the webpage parameter.

D-Link DIR-619L B1 2.02 is vulnerable to Buffer Overflow via formSetWanPPPoE function.

An issue was discovered in /bin/mini_upnpd on D-Link DIR-619L 2.06beta devices. There is a heap buffer overflow allowing remote attackers to restart router via the M-search request ST parameter. No authentication required

D-Link DIR-823G A1V1.0.2B05 was discovered to contain a buffer overflow via the StartTime parameter in the SetParentsControlInfo function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

A vulnerability, which was classified as critical, was found in D-Link DAP-1562 1.10. This affects the function pure_auth_check of the component HTTP POST Request Handler. The manipulation of the argument a1 leads to null pointer dereference. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

D-Link DIR-880 A1_FW107WWb08 was discovered to contain a NULL pointer dereference in the function FUN_00010824.

An issue was discovered in /bin/goahead on D-Link DIR-823G devices with the firmware 1.02B03. There is incorrect access control allowing remote attackers to reset the router without authentication via the SetFactoryDefault HNAP API. Consequently, an attacker can achieve a denial-of-service attack without authentication.

D-LINK DIR-815 v1.01 was discovered to contain a buffer overflow via the component /web/captcha.cgi.

In D-link DIR-816 A2_v1.10CNB04.img,the network can be reset without authentication via /goform/setMAC.

Null Pointer Dereference vulnerability exists in D-Link DSL-2740R UK_1.01, which could let a remove malicious user cause a denial of service via the send_hnap_unauthorized function. It could be triggered by sending crafted POST request to /HNAP1/. NOTE: The DSL-2740R and all hardware revisions are considered End of Life and as such this issue will not be patched

D-link DIR-816 A2_v1.10CNB04, DIR-878 DIR_878_FW1.30B08.img is vulnerable to Buffer Overflow via /goform/addRouting.

An issue was discovered on D-Link DCS-1100 and DCS-1130 devices. The device has a custom telnet daemon as a part of the busybox and retrieves the password from the shadow file using the function getspnam at address 0x00053894. Then performs a crypt operation on the password retrieved from the user at address 0x000538E0 and performs a strcmp at address 0x00053908 to check if the password is correct or incorrect. However, the /etc/shadow file is a part of CRAM-FS filesystem which means that the user cannot change the password and hence a hardcoded hash in /etc/shadow is used to match the credentials provided by the user. This is a salted hash of the string "admin" and hence it acts as a password to the device which cannot be changed as the whole filesystem is read only.

An Authentication vulnerability exists in D-LINK WCS-1100 1.02, TESCO DCS-2121 1.05_TESCO, TESCO DCS-2102 1.05_TESCO, DCS-7510 1.00, DCS-7410 1.00, DCS-6410 1.00, DCS-5635 1.01, DCS-5605 1.01, DCS-5230L 1.02, DCS-5230 1.02, DCS-3430 1.02, DCS-3411 1.02, DCS-3410 1.02, DCS-2121 1.06_FR, DCS-2121 1.06, DCS-2121 1.05_RU, DCS-2102 1.06_FR, DCS-2102 1.06, DCS-2102 1.05_RU, DCS-1130L 1.04, DCS-1130 1.04_US, DCS-1130 1.03, DCS-1100L 1.04, DCS-1100 1.04_US, and DCS-1100 1.03 due to hard-coded credentials that serve as a backdoor, which allows remote attackers to access the RTSP video stream.

D-Link DVX-2000MS contains hard-coded credentials for undocumented user accounts in the '/etc/passwd' file. As weak passwords have been used, the plaintext passwords can be recovered from the hash values.

D-Link DIR-850L REV. A (with firmware through FW114WWb07_h2ab_beta1) and REV. B (with firmware through FW208WWb02) devices have 0644 /var/etc/shadow (aka the /etc/shadow symlink target) permissions.

D-Link DIR-850L REV. A (with firmware through FW114WWb07_h2ab_beta1) and REV. B (with firmware through FW208WWb02) devices use the same hardcoded /etc/stunnel.key private key across different customers' installations, which allows remote attackers to defeat the HTTPS cryptographic protection mechanisms by leveraging knowledge of this key from another installation.

In D-Link DIR-860L REVA FIRMWARE PATCH 1.10..B04, the Telnet service contains hardcoded credentials, enabling attackers to log in remotely to the Telnet service and perform arbitrary commands.

D-Link DIR-300 REVA FIRMWARE v1.06B05_WW contains hardcoded credentials in the Telnet service.

D-Link DIR-820LW REVB FIRMWARE PATCH 2.03.B01_TC contains hardcoded credentials in the Telnet service, enabling attackers to log in remotely to the Telnet service and perform arbitrary commands.

D-Link DIR-605L v2.13B01 was discovered to contain a hardcoded password vulnerability in /etc/passwd, which allows attackers to log in as root.

D-Link DIR-850L REV. B (with firmware through FW208WWb02) devices have a hardcoded password of wrgac25_dlink.2013gui_dir850l for the Alphanetworks account upon device reset, which allows remote attackers to obtain root access via a TELNET session.

D-Link DIR-850L REV. A (with firmware through FW114WWb07_h2ab_beta1) and REV. B (with firmware through FW208WWb02) devices have 0666 /var/run/hostapd* permissions.

D-LINK Go-RT-AC750 GORTAC750_A1_FW_v101b03 has a hardcoded password for the Alphanetworks account, which allows remote attackers to obtain root access via a telnet session.

D-Link DIR-615 before v20.12PTb04 has a second admin account with a 0x1 BACKDOOR value, which might allow remote attackers to obtain access via a TELNET connection.

Use of a static key to protect a JWT token used in user authentication can allow an for an authentication bypass in D-Link D-View 8 v2.0.1.28

D-Link DAP-2622 Telnet CLI Use of Hardcoded Credentials Authentication Bypass Vulnerability. This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of D-Link DAP-2622 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the CLI service, which listens on TCP port 23. The server program contains hard-coded credentials. An attacker can leverage this vulnerability to bypass authentication on the system. . Was ZDI-CAN-20050.

D-Link DAP-1360 Hardcoded Credentials Authentication Bypass Vulnerability. This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of D-Link DAP-1360 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the processing of login requests to the web-based user interface. The firmware contains hard-coded default credentials. An attacker can leverage this vulnerability to bypass authentication on the system. . Was ZDI-CAN-18455.

A vulnerability, which was classified as critical, has been found in D-Link DIR-890L up to 111b04. This issue affects some unknown processing of the file rgbin of the component UART Port. The manipulation leads to hard-coded credentials. It is possible to launch the attack on the physical device. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability, which was classified as problematic, was found in D-Link DCS-7517 up to 2.02.0. This affects the function g_F_n_GenPassForQlync of the file /bin/httpd of the component Qlync Password Generation Handler. The manipulation leads to use of hard-coded password. It is possible to initiate the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

D-Link DSR-500N version 1.02 contains hard-coded credentials for undocumented user accounts in the '/etc/passwd' file.If an attacker succeeds in recovering the cleartext password of the identified hash value, he will be able to log in via SSH or Telnet and thus gain access to the underlying embedded Linux operating system on the device. Fixed in version 2.12/2. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

In the web server on D-Link DIR-620 devices with a certain customized (by ISP) variant of firmware 1.0.3, 1.0.37, 1.3.1, 1.3.3, 1.3.7, 1.4.0, and 2.0.22, there is a hardcoded password of anonymous for the admin account.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability, which was classified as very critical, has been found in D-Link DNS-320L, DNS-325, DNS-327L and DNS-340L up to 20240403. This issue affects some unknown processing of the file /cgi-bin/nas_sharing.cgi of the component HTTP GET Request Handler. The manipulation of the argument user with the input messagebus leads to hard-coded credentials. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-259283. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.

D-Link COVR-2600R and COVR-3902 Kit before 1.01b05Beta01 use hardcoded credentials for telnet connection, which allows unauthenticated attackers to gain privileged access to the router, and to extract sensitive data or modify the configuration.

spaces.htm on multiple D-Link devices (DSL, DIR, DWR) allows remote unauthenticated attackers to discover admin credentials.

atbox.htm on D-Link DSL-2770L devices allows remote unauthenticated attackers to discover admin credentials.

dirary0.js on D-Link DIR-140L, DIR-640L devices allows remote unauthenticated attackers to discover admin credentials.

The D-Link router DIR-868L 3.01 is vulnerable to credentials disclosure in telnet service through decompilation of firmware, that allows an unauthenticated attacker to gain access to the firmware and to extract sensitive data.

The D-Link router DIR-880L 1.07 is vulnerable to credentials disclosure in telnet service through decompilation of firmware, that allows an unauthenticated attacker to gain access to the firmware and to extract sensitive data.

D-Link DPH-400S/SE VoIP Phone v1.01 contains hardcoded provisioning variables, including PROVIS_USER_PASSWORD, which may expose sensitive user credentials. An attacker with access to the firmware image can extract these credentials using static analysis tools such as strings or xxd, potentially leading to unauthorized access to device functions or user accounts. This vulnerability exists due to insecure storage of sensitive information in the firmware binary.