Null Pointer Dereference vulnerability in D-Link DIR-825 2.10b02, which could let a remote malicious user cause a denial of service. The vulnerability could be triggered by sending an HTTP request with URL /vct_wan; the sbin/httpd would invoke the strchr function and take NULL as a first argument, which finally leads to the segmentation fault. NOTE: The DIR-825 and all hardware revisions is considered End of Life and as such this issue will not be patched

A vulnerability, which was classified as critical, was found in D-Link DAP-1562 1.10. This affects the function pure_auth_check of the component HTTP POST Request Handler. The manipulation of the argument a1 leads to null pointer dereference. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

Null Pointer Dereference vulnerability exists in D-Link DAP-2310 2.07.RC031, DAP-2330 1.07.RC028, DAP-2360 2.07.RC043, DAP-2553 3.06.RC027, DAP-2660 1.13.RC074, DAP-2690 3.16.RC100, DAP-2695 1.17.RC063, DAP-3320 1.01.RC014 and DAP-3662 1.01.RC022 in the upload_certificate function of sbin/httpd binary. When the binary handle the specific HTTP GET request, the strrchr in the upload_certificate function would take NULL as first argument, and incur the NULL pointer dereference vulnerability.

Null pointer dereference vulnerability in D-Link DAP-2310 2,10RC039, DAP-2330 1.10RC036 BETA, DAP-2360 2.10RC055, DAP-2553 3.10rc039 BETA, DAP-2660 1.15rc131b, DAP-2690 3.20RC115 BETA, DAP-2695 1.20RC093, DAP-3320 1.05RC027 BETA and DAP-3662 1.05rc069 in the sbin/httpd binary. The crash happens at the `atoi' operation when a specific network package are sent to the httpd binary.

Null Pointer Dereference vulnerability exists in D-Link DSP-W215 1.10, which could let a remote malicious user cause a denial of servie via usr/bin/lighttpd. It could be triggered by sending an HTTP request without URL in the start line directly to the device. NOTE: The DSP-W215 and all hardware revisions is considered End of Life and as such this issue will not be patched

Null Pointer Dereference vulnerability exists in D-Link DAP-2310 2.07.RC031, DAP-2330 1.07.RC028, DAP-2360 2.07.RC043, DAP-2553 3.06.RC027, DAP-2660 1.13.RC074, DAP-2690 3.16.RC100, DAP-2695 1.17.RC063, DAP-3320 1.01.RC014 and DAP-3662 1.01.RC022 in the upload_config function of sbin/httpd binary. When the binary handle the specific HTTP GET request, the content in upload_file variable is NULL in the upload_config function then the strncasecmp would take NULL as first argument, and incur the NULL pointer dereference vulnerability.

A vulnerability has been found in D-Link DIR-823X 240126/240802 and classified as critical. Affected by this vulnerability is the function FUN_00412244. The manipulation leads to null pointer dereference. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DI-8400 16.07.26A1. It has been classified as problematic. This affects an unknown part of the file usb_paswd.asp of the component jhttpd. The manipulation of the argument share_enable leads to null pointer dereference. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A NULL pointer dereference in the SetWLanRadioSettings function of D-Link DIR-823G A1 v1.0.2B05 allows attackers to cause a Denial of Service (DoS) via a crafted HTTP request.

Null Pointer Dereference vulnerability exists in D-Link DSL-2740R UK_1.01, which could let a remove malicious user cause a denial of service via the send_hnap_unauthorized function. It could be triggered by sending crafted POST request to /HNAP1/. NOTE: The DSL-2740R and all hardware revisions are considered End of Life and as such this issue will not be patched

A buffer overflow vulnerability exists in D-Link DI-8003 16.07.26A1 due to improper handling of the name and mem parameters in the /time_group.asp endpoint.

A buffer overflow vulnerability exists in D-Link DI-8003 16.07.26A1 due to inadequate validation of input size in the routes_static parameter in the /router.asp endpoint.

A buffer overflow vulnerability exists in D-Link DI-8003 16.07.26A1 due to insufficient input validation on the name parameter in the /qos_type_asp.asp endpoint.

A buffer overflow vulnerability exists in D-Link DI-8003 16.07.26A1 due to improper handling of multiple parameters in the /url_rule.asp endpoint. An attacker can exploit this vulnerability by sending a crafted HTTP GET request with parameters name, en, ips, u, time, act, rpri, and log.

A buffer overflow vulnerability exists in D-Link DI-8003 16.07.26A1 due to improper handling of the iface parameter in the /wan_line_detection.asp endpoint.

A buffer overflow vulnerability exists in D-Link DI-8003 16.07.26A1 due to improper handling of the custom_error parameter in the /user.asp endpoint.

A buffer overflow vulnerability exists in D-Link DI-8003 16.07.26A1 due to improper validation of user input in the qj.asp endpoint.

A buffer overflow vulnerability exists in D-Link DI-8003 16.07.26A1 due to improper handling of the name parameter in the /url_group.asp endpoint.

A buffer overflow vulnerability exists in D-Link DI-8003 16.07.26A1 and DI-8003G 19.12.10A1 due to improper handling of the wan_ping parameter in the /wan_ping.asp endpoint.

A buffer overflow vulnerability exists in D-Link DI-8003 16.07.26A1 due to improper handling of the s parameter in the /web_list_opt.asp endpoint.

A buffer overflow vulnerability exists in D-Link DI-8003 16.07.26A1 due to improper handling of the http_lanport parameter in the /webgl.asp endpoint.

A buffer overflow vulnerability exists in D-Link DI-8003 16.07.26A1 due to improper validation of the id parameter in the /thd_member.asp endpoint.

A buffer overflow vulnerability exists in D-Link DI-8003 16.07.26A1 due to improper handling of parameters in the /xwgl_ref.asp endpoint. An attacker can exploit this vulnerability by sending a crafted HTTP GET request with excessively long strings in parameters name, en, user_id, shibie_name, time, act, log, and rpri.

A buffer overflow vulnerability exists in D-Link DI-8003 16.07.26A1 due to improper handling of the name parameter in the /usb_paswd.asp endpoint.

A buffer overflow vulnerability exists in D-Link DI-8003 16.07.26A1 due to improper input validation in the vlan_name parameter in the /shut_set.asp endpoint.

A buffer overflow vulnerability exists in D-Link DI-8003 16.07.26A1 due to improper handling of input parameters in the /web_keyword.asp endpoint. An attacker can exploit this vulnerability by sending a crafted HTTP GET request via the name, en, time, mem_gb2312, and mem_utf8 parameters.

A vulnerability classified as critical was found in D-Link DI-7003GV2 24.04.18D1 R(68125). This vulnerability affects the function sub_4983B0 of the file /H5/backup.asp?opt=reset of the component Factory Reset Handler. The manipulation leads to denial of service. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

D-Link DI-8300 v16.07.26A1 was discovered to contain a buffer overflow via the fn parameter in the tgfile_htm function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

D-Link DI-8300 v16.07.26A1 was discovered to contain a buffer overflow via the fx parameter in the jingx_asp function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

D-Link DI-8300 v16.07.26A1 was discovered to contain a buffer overflow via the ip parameter in the ip_position_asp function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

A buffer overflow vulnerability exists in D-Link DI-8003 16.07.26A1 due to improper handling of the pid parameter in the /trace.asp endpoint.

An HTTP smuggling attack in the web application of D-Link DIR-X1860 before v1.10WWB09_Beta allows a remote unauthenticated attacker to DoS the web application via sending a specific HTTP packet.

D-Link DIR-823G A1V1.0.2B05 was discovered to contain a buffer overflow via the Mac parameter in the SetParentsControlInfo function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

D-Link DIR-619L B1 2.02 is vulnerable to Buffer Overflow via formSetWanNonLogin function.

D-Link DSL-3788 revA1 1.01R1B036_EU_EN is vulnerable to Buffer Overflow via the COMM_MAKECustomMsg function of the webproc cgi

D-Link DIR-823G A1V1.0.2B05 was discovered to contain a buffer overflow via the AdminPassword parameter in the SetDeviceSettings function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

D-Link DIR-823G A1V1.0.2B05 was discovered to contain a buffer overflow via the MacAddress parameter in the SetWanSettings function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

D-Link D-View shutdown_coreserver Missing Authentication Denial-of-Service Vulnerability. This vulnerability allows remote attackers to create a denial-of-service condition on affected installations of D-Link D-View. Authentication is not required to exploit this vulnerability. The specific flaw exists within the shutdown_coreserver action. The issue results from the lack of authentication prior to allowing access to functionality. An attacker can leverage this vulnerability to create a denial-of-service condition on the system. Was ZDI-CAN-19572.

A stack overflow vulnerability exists in pingV4Msg component in D-Link DIR820LA1_FW105B03, allows attackers to cause a denial of service via the nextPage parameter to ping.ccp.

Stack buffer overflow vulnerability in D-Link DIR-513 v1.10 via the webPage parameter to goform/formWlanSetup.

D-Link DIR600L Ax FW116WWb01 was discovered to contain a buffer overflow via the curTime parameter in the function formSetWizardSelectMode.

D-Link DI-8100 v16.07.26A1 has a stack overflow vulnerability in the dbsrv_asp function.

D-Link DIR600LAx FW116WWb01 was discovered to contain a buffer overflow via the curTime parameter in the function formSetQoS.

D-Link DIR-823G A1 v1.0.2B05 was discovered to contain a buffer overflow in the FillMacCloneMac parameter in the /EXCU_SHELL endpoint. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

On D-Link DIR-819 Firmware Version 1.06 Hardware Version A1 devices, it is possible to trigger a Denial of Service via the sys_token parameter in a cgi-bin/webproc?getpage=html/index.html request.

D-Link devices DAP-2310 v2.10rc036 and earlier, DAP-2330 v1.06rc020 and earlier, DAP-2360 v2.10rc050 and earlier, DAP-2553 v3.10rc031 and earlier, DAP-2660 v1.15rc093 and earlier, DAP-2690 v3.20rc106 and earlier, DAP-2695 v1.20rc119_beta31 and earlier, DAP-3320 v1.05rc027 beta and earlier, DAP-3662 v1.05rc047 and earlier allows attackers to cause a Denial of Service (DoS) via uploading a crafted firmware after modifying the firmware header.

D-Link Wireless AC1200 Dual Band VDSL ADSL Modem Router DSL-3782 Firmware v1.01 allows unauthenticated attackers to cause a Denial of Service (DoS) via the User parameter or Pwd parameter to Login.asp.

D-Link DIR-619 Ax v1.00 was discovered to contain a stack overflow in the function formSetWanPPTP. This vulnerability allows attackers to cause a Denial of Service (DoS) via the curTime parameter.

D-Link DIR-619 Ax v1.00 was discovered to contain a stack overflow in the function formSetWanNonLogin. This vulnerability allows attackers to cause a Denial of Service (DoS) via the curTime parameter.

D-Link DIR-619 Ax v1.00 was discovered to contain a stack overflow in the function formAdvanceSetup. This vulnerability allows attackers to cause a Denial of Service (DoS) via the webpage parameter.