A use-after-free in function hci_sock_bound_ioctl() of the Linux kernel HCI subsystem was found in the way user calls ioct HCIUNBLOCKADDR or other way triggers race condition of the call hci_unregister_dev() together with one of the calls hci_sock_blacklist_add(), hci_sock_blacklist_del(), hci_get_conn_info(), hci_get_auth_info(). A privileged local user could use this flaw to crash the system or escalate their privileges on the system. This flaw affects the Linux kernel versions prior to 5.13-rc5.

Another race in XENMAPSPACE_grant_table handling Guests are permitted access to certain Xen-owned pages of memory. The majority of such pages remain allocated / associated with a guest for its entire lifetime. Grant table v2 status pages, however, are de-allocated when a guest switches (back) from v2 to v1. Freeing such pages requires that the hypervisor enforce that no parallel request can result in the addition of a mapping of such a page to a guest. That enforcement was missing, allowing guests to retain access to pages that were freed and perhaps re-used for other purposes. Unfortunately, when XSA-379 was being prepared, this similar issue was not noticed.

An elevation of privilege vulnerability exists due to a race condition in Windows Subsystem for Linux, aka 'Windows Subsystem for Linux Elevation of Privilege Vulnerability'.

The Mozilla Maintenance Service does not guard against files being hardlinked to another file in the updates directory, allowing for the replacement of local files, including the Maintenance Service executable, which is run with privileged access. Additionally, there was a race condition during checks for junctions and symbolic links by the Maintenance Service, allowing for potential local file and directory manipulation to be undetected in some circumstances. This allows for potential privilege escalation by a user with unprivileged local access. <br>*Note: These attacks requires local system access and only affects Windows. Other operating systems are not affected.*. This vulnerability affects Firefox < 69 and Firefox ESR < 68.1.

The repair operation of VMware Tools for Windows 10.x.y has a race condition which may allow for privilege escalation in the Virtual Machine where Tools is installed. This vulnerability is not present in VMware Tools 11.x.y since the affected functionality is not present in VMware Tools 11.

Windows Group Policy Elevation of Privilege Vulnerability

An issue was discovered in Xen through 4.14.x. There are evtchn_reset() race conditions. Uses of EVTCHNOP_reset (potentially by a guest on itself) or XEN_DOMCTL_soft_reset (by itself covered by XSA-77) can lead to the violation of various internal assumptions. This may lead to out of bounds memory accesses or triggering of bug checks. In particular, x86 PV guests may be able to elevate their privilege to that of the host. Host and guest crashes are also possible, leading to a Denial of Service (DoS). Information leaks cannot be ruled out. All Xen versions from 4.5 onwards are vulnerable. Xen versions 4.4 and earlier are not vulnerable.

GRUB2 contains a race condition in grub_script_function_create() leading to a use-after-free vulnerability which can be triggered by redefining a function whilst the same function is already executing, leading to arbitrary code execution and secure boot restriction bypass. This issue affects GRUB2 version 2.04 and prior versions.

Integer overflows were discovered in the functions grub_cmd_initrd and grub_initrd_init in the efilinux component of GRUB2, as shipped in Debian, Red Hat, and Ubuntu (the functionality is not included in GRUB2 upstream), leading to a heap-based buffer overflow. These could be triggered by an extremely large number of arguments to the initrd command on 32-bit architectures, or a crafted filesystem with very large files on any architecture. An attacker could use this to execute arbitrary code and bypass UEFI Secure Boot restrictions. This issue affects GRUB2 version 2.04 and prior versions.

An issue was discovered in Xen through 4.13.x, allowing Intel guest OS users to gain privileges or cause a denial of service because of non-atomic modification of a live EPT PTE. When mapping guest EPT (nested paging) tables, Xen would in some circumstances use a series of non-atomic bitfield writes. Depending on the compiler version and optimisation flags, Xen might expose a dangerous partially written PTE to the hardware, which an attacker might be able to race to exploit. A guest administrator or perhaps even an unprivileged guest user might be able to cause denial of service, data corruption, or privilege escalation. Only systems using Intel CPUs are vulnerable. Systems using AMD CPUs, and Arm systems, are not vulnerable. Only systems using nested paging (hap, aka nested paging, aka in this case Intel EPT) are vulnerable. Only HVM and PVH guests can exploit the vulnerability. The presence and scope of the vulnerability depends on the precise optimisations performed by the compiler used to build Xen. If the compiler generates (a) a single 64-bit write, or (b) a series of read-modify-write operations in the same order as the source code, the hypervisor is not vulnerable. For example, in one test build using GCC 8.3 with normal settings, the compiler generated multiple (unlocked) read-modify-write operations in source-code order, which did not constitute a vulnerability. We have not been able to survey compilers; consequently we cannot say which compiler(s) might produce vulnerable code (with which code-generation options). The source code clearly violates the C rules, and thus should be considered vulnerable.

A flaw was found in qemu Media Transfer Protocol (MTP) before version 3.1.0. A path traversal in the in usb_mtp_write_data function in hw/usb/dev-mtp.c due to an improper filename sanitization. When the guest device is mounted in read-write mode, this allows to read/write arbitrary files which may lead do DoS scenario OR possibly lead to code execution on the host.

Windows Digital Media Receiver Elevation of Privilege Vulnerability

Windows User Profile Service Elevation of Privilege Vulnerability

Windows Bluetooth Driver Elevation of Privilege Vulnerability

Windows Work Folder Service Elevation of Privilege Vulnerability

Windows File Explorer Elevation of Privilege Vulnerability

x86 pv: Race condition in typeref acquisition Xen maintains a type reference count for pages, in addition to a regular reference count. This scheme is used to maintain invariants required for Xen's safety, e.g. PV guests may not have direct writeable access to pagetables; updates need auditing by Xen. Unfortunately, the logic for acquiring a type reference has a race condition, whereby a safely TLB flush is issued too early and creates a window where the guest can re-establish the read/write mapping before writeability is prohibited.

Windows ALPC Elevation of Privilege Vulnerability

Windows ALPC Elevation of Privilege Vulnerability

Windows Update Stack Elevation of Privilege Vulnerability

Windows ALPC Elevation of Privilege Vulnerability

Windows ALPC Elevation of Privilege Vulnerability

A use-after-free exists in drivers/tee/tee_shm.c in the TEE subsystem in the Linux kernel through 5.15.11. This occurs because of a race condition in tee_shm_get_from_id during an attempt to free a shared memory object.

A race condition was discovered in ext4_write_inline_data_end in fs/ext4/inline.c in the ext4 subsystem in the Linux kernel through 5.13.13.

NVIDIA GeForce Experience, all versions prior to 3.20.2, contains a vulnerability when GameStream is enabled in which an attacker with local system access can corrupt a system file, which may lead to denial of service or escalation of privileges.

IBM Db2 for Linux, UNIX and Windows (includes Db2 Connect Server) 9.7, 10.1, 10.5, 11.1, and 11.5 could allow a local user to execute arbitrary code and conduct DLL hijacking attacks.

The npm package "tar" (aka node-tar) before versions 4.4.18, 5.0.10, and 6.1.9 has an arbitrary file creation/overwrite and arbitrary code execution vulnerability. node-tar aims to guarantee that any file whose location would be outside of the extraction target directory is not extracted. This is, in part, accomplished by sanitizing absolute paths of entries within the archive, skipping archive entries that contain `..` path portions, and resolving the sanitized paths against the extraction target directory. This logic was insufficient on Windows systems when extracting tar files that contained a path that was not an absolute path, but specified a drive letter different from the extraction target, such as `C:some\path`. If the drive letter does not match the extraction target, for example `D:\extraction\dir`, then the result of `path.resolve(extractionDirectory, entryPath)` would resolve against the current working directory on the `C:` drive, rather than the extraction target directory. Additionally, a `..` portion of the path could occur immediately after the drive letter, such as `C:../foo`, and was not properly sanitized by the logic that checked for `..` within the normalized and split portions of the path. This only affects users of `node-tar` on Windows systems. These issues were addressed in releases 4.4.18, 5.0.10 and 6.1.9. The v3 branch of node-tar has been deprecated and did not receive patches for these issues. If you are still using a v3 release we recommend you update to a more recent version of node-tar. There is no reasonable way to work around this issue without performing the same path normalization procedures that node-tar now does. Users are encouraged to upgrade to the latest patched versions of node-tar, rather than attempt to sanitize paths themselves.

The npm package "tar" (aka node-tar) before versions 4.4.18, 5.0.10, and 6.1.9 has an arbitrary file creation/overwrite and arbitrary code execution vulnerability. node-tar aims to guarantee that any file whose location would be modified by a symbolic link is not extracted. This is, in part, achieved by ensuring that extracted directories are not symlinks. Additionally, in order to prevent unnecessary stat calls to determine whether a given path is a directory, paths are cached when directories are created. This logic was insufficient when extracting tar files that contained both a directory and a symlink with names containing unicode values that normalized to the same value. Additionally, on Windows systems, long path portions would resolve to the same file system entities as their 8.3 "short path" counterparts. A specially crafted tar archive could thus include a directory with one form of the path, followed by a symbolic link with a different string that resolves to the same file system entity, followed by a file using the first form. By first creating a directory, and then replacing that directory with a symlink that had a different apparent name that resolved to the same entry in the filesystem, it was thus possible to bypass node-tar symlink checks on directories, essentially allowing an untrusted tar file to symlink into an arbitrary location and subsequently extracting arbitrary files into that location, thus allowing arbitrary file creation and overwrite. These issues were addressed in releases 4.4.18, 5.0.10 and 6.1.9. The v3 branch of node-tar has been deprecated and did not receive patches for these issues. If you are still using a v3 release we recommend you update to a more recent version of node-tar. If this is not possible, a workaround is available in the referenced GHSA-qq89-hq3f-393p.

A use-after-free vulnerability was found in usbredir in versions prior to 0.11.0 in the usbredirparser_serialize() in usbredirparser/usbredirparser.c. This issue occurs when serializing large amounts of buffered write data in the case of a slow or blocked destination.

VMware Workstation (15.x prior to 15.5.1) and Horizon View Agent (7.10.x prior to 7.10.1 and 7.5.x prior to 7.5.4) contain a DLL hijacking vulnerability due to insecure loading of a DLL by Cortado Thinprint. Successful exploitation of this issue may allow attackers with normal user privileges to escalate their privileges to administrator on a Windows machine where Workstation or View Agent is installed.

A non-privileged user or program can put code and a config file in a known non-privileged path (under C:/usr/local/) that will make curl <= 7.65.1 automatically run the code (as an openssl "engine") on invocation. If that curl is invoked by a privileged user it can do anything it wants.

Acronis Cyber Protect 15 for Windows prior to build 27009 and Acronis Agent for Windows prior to build 26226 allowed local privilege escalation via DLL hijacking.

In systemd before v242-rc4, it was discovered that pam_systemd does not properly sanitize the environment before using the XDG_SEAT variable. It is possible for an attacker, in some particular configurations, to set a XDG_SEAT environment variable which allows for commands to be checked against polkit policies using the "allow_active" element rather than "allow_any".

A flaw was found in the PKI-server, where the spkispawn command, when run in debug mode, stores admin credentials in the installation log file. This flaw allows a local attacker to retrieve the file to obtain the admin password and gain admin privileges to the Dogtag CA manager. The highest threat from this vulnerability is to confidentiality.

An issue was discovered in USBGuard before 1.1.0. On systems with the usbguard-dbus daemon running, an unprivileged user could make USBGuard allow all USB devices to be connected in the future.

Acrobat Reader DC versions 2021.005.20060 (and earlier), 2020.004.30006 (and earlier) and 2017.011.30199 (and earlier) are affected by an Uncontrolled Search Path Element vulnerability. A local attacker with non-administrative privileges can plant a malicious DLL to achieve arbitrary code execution in the context of the current user via DLL hijacking. Exploitation of this issue requires user interaction.

A crafted 16-bit grayscale PNG image may lead to a out-of-bounds write in the heap area. An attacker may take advantage of that to cause heap data corruption or eventually arbitrary code execution and circumvent secure boot protections. This issue has a high complexity to be exploited as an attacker needs to perform some triage over the heap layout to achieve signifcant results, also the values written into the memory are repeated three times in a row making difficult to produce valid payloads. This flaw affects grub2 versions prior grub-2.12.

OpenVPN before version 2.5.3 on Windows allows local users to load arbitrary dynamic loadable libraries via an OpenSSL configuration file if present, which allows the user to run arbitrary code with the same privilege level as the main OpenVPN process (openvpn.exe).

dandavison delta before 0.8.3 on Windows resolves an executable's pathname as a relative path from the current directory.

A race condition vulnerability was found in rpm. A local unprivileged user could use this flaw to bypass the checks that were introduced in response to CVE-2017-7500 and CVE-2017-7501, potentially gaining root privileges. The highest threat from this vulnerability is to data confidentiality and integrity as well as system availability.

TeamViewer before 14.7.48644 on Windows loads untrusted DLLs in certain situations.

A race condition was found in the QXL driver in the Linux kernel. The qxl_mode_dumb_create() function dereferences the qobj returned by the qxl_gem_object_create_with_handle(), but the handle is the only one holding a reference to it. This flaw allows an attacker to guess the returned handle value and trigger a use-after-free issue, potentially leading to a denial of service or privilege escalation.

Goverlan Reach Console before 9.50, Goverlan Reach Server before 3.50, and Goverlan Client Agent before 9.20.50 have an Untrusted Search Path that leads to Command Injection and Local Privilege Escalation via DLL hijacking.

An incorrect permission vulnerability in the product installer folders for Trend Micro HouseCall for Home Networks version 5.3.1179 and below could allow an attacker to escalate privileges by placing arbitrary code on a specified folder and have that code be executed by an Administrator who is running a scan. Please note that an attacker must first obtain the ability to execute low-privileged code on the target system to exploit this vulnerability.

Tobesoft XPlatform v9.1, 9.2.0, 9.2.1 and 9.2.2 have a vulnerability that can load unauthorized DLL files. It allows attacker to cause remote code execution.

An incorrect permission vulnerability in the product installer for Trend Micro HouseCall for Home Networks version 5.3.1179 and below could allow an attacker to escalate privileges by placing arbitrary code on a specified folder and have that code be executed by an Administrator who is running a scan. Please note that an attacker must first obtain the ability to execute low-privileged code on the target system to exploit this vulnerability.

Adobe Creative Cloud Desktop 3.5 (and earlier) is affected by an uncontrolled search path vulnerability that could result in elevation of privileges. Exploitation of this issue requires user interaction in that a victim must log on to the attacker's local machine.

SSH Tectia Client and Server before 6.4.19 on Windows allow local privilege escalation in nonstandard conditions. ConnectSecure on Windows is affected.