There is an improper security permission configuration vulnerability on ACPU.Successful exploitation of this vulnerability may affect service confidentiality, integrity, and availability.

FusionSphere V100R006C00SPC102(NFV) has an incorrect authorization vulnerability. An authenticated attacker could execute commands that he/she should have had no permission to perform, thereby querying, modifying, and deleting certain service data and making the service unavailable.

FusionSphere OpenStack V100R006C00SPC102(NFV)has an improper verification of cryptographic signature vulnerability. The software does not verify the cryptographic signature. An attacker with high privilege may exploit this vulnerability to inject malicious software.

FusionSphere OpenStack V100R006C00 has an improper authorization vulnerability. Due to improper authorization, an attacker with low privilege may exploit this vulnerability to obtain the operation authority of some specific directory, causing privilege escalation.

There is a security protection bypass vulnerability with the modem.Successful exploitation of this vulnerability may cause memory protection failure.

Huawei P9 smart phones with software versions earlier before EVA-AL00C00B365, versions earlier before EVA-AL10C00B365,Versions earlier before EVA-CL00C92B365, versions earlier before EVA-DL00C17B365, versions earlier before EVA-TL00C01B365 have a privilege escalation vulnerability. An unauthenticated attacker can bypass phone activation to user management page of the phone and create a new user. Successful exploit could allow the attacker operate part function of the phone.

There is an insufficient integrity check vulnerability in Huawei Sound X Product. The system does not check certain software package's integrity sufficiently. Successful exploit could allow an attacker to load a crafted software package to the device. Affected product versions include:AIS-BW80H-00 versions 9.0.3.1(H100SP13C00),9.0.3.1(H100SP18C00),9.0.3.1(H100SP3C00),9.0.3.1(H100SP9C00),9.0.3.2(H100SP1C00),9.0.3.2(H100SP2C00),9.0.3.2(H100SP5C00),9.0.3.2(H100SP8C00),9.0.3.3(H100SP1C00).

There is a privilege escalation vulnerability in SMC2.0 product. Some files in a directory of a module are located improperly. It does not apply the directory limitation. Attackers can exploit this vulnerability by crafting malicious file to launch privilege escalation. This can compromise normal service of affected products.

There is an insufficient integrity vulnerability in Huawei products. A module does not perform sufficient integrity check in a specific scenario. Attackers can exploit the vulnerability by physically install malware. This could compromise normal service of the affected device. (Vulnerability ID: HWPSIRT-2020-00145) This vulnerability has been assigned a Common Vulnerabilities and Exposures (CVE) ID: CVE-2020-9210.

HUAWEI Mate 30 versions earlier than 10.1.0.159(C00E159R7P2) have a vulnerability of improper buffer operation. Due to improper restrictions, local attackers with high privileges can exploit the vulnerability to cause system heap overflow.

FusionSphere OpenStack 6.5.1 have an improper permissions management vulnerability. The software does not correctly perform a privilege assignment when an actor attempts to perform an action. Successful exploit could allow certain user to do certain operations beyond its privilege.

Taurus-AN00B versions earlier than 10.1.0.156(C00E155R7P2) have a privilege elevation vulnerability. Due to lack of privilege restrictions on some of the business functions of the device. An attacker could exploit this vulnerability to access the protecting information, resulting in the elevation of the privilege.

The reminder module lacks an authentication mechanism for broadcasts received. Successful exploitation of this vulnerability may affect availability.

The Bluetooth module has an authentication bypass vulnerability in the pairing process. Successful exploitation of this vulnerability may affect confidentiality.

Vulnerability of lax app identity verification in the pre-authorization function.Successful exploitation of this vulnerability will cause malicious apps to become pre-authorized.

The bundle management module lacks authentication and control mechanisms in some APIs. Successful exploitation of this vulnerability may affect data confidentiality.

The WMS module lacks the authentication mechanism in some APIs. Successful exploitation of this vulnerability may affect data confidentiality.

The WMS module lacks the authentication mechanism in some APIs. Successful exploitation of this vulnerability may affect data confidentiality.

Vulnerability of lax app identity verification in the pre-authorization function.Successful exploitation of this vulnerability will cause malicious apps to become pre-authorized.

Vulnerability of missing authentication for critical functions in the Wi-Fi module.Successful exploitation of this vulnerability may affect service confidentiality.

The memory management module has the logic bypass vulnerability. Successful exploitation of this vulnerability may affect data confidentiality.

The bundle management module lacks authentication and control mechanisms in some APIs. Successful exploitation of this vulnerability may affect data confidentiality.

There is a Missing Authentication for Critical Function vulnerability in Huawei Smartphone. Successful exploitation of this vulnerability may impair data confidentiality.

The 'Find Phone' function in Nice smartphones with software versions earlier before Nice-AL00C00B0135 has an authentication bypass vulnerability. An unauthenticated attacker may wipe and factory reset the phone by special steps. Due to missing authentication of the 'Find Phone' function, an attacker may exploit the vulnerability to bypass the 'Find Phone' function in order to use the phone normally.

Vulnerability of access permissions not being strictly verified in the APPWidget module.Successful exploitation of this vulnerability may cause some apps to run without being authorized.

There is an information leak vulnerability in iManager NetEco 6000 versions V600R021C00. A module is lack of authentication. Attackers without access to the module can exploit this vulnerability to obtain extra information, leading to information leak.

There is a missing authentication vulnerability in some Huawei smartphone.Successful exploitation of this vulnerability may lead to low-sensitive information exposure.

Permission control vulnerability in the audio module. Successful exploitation of this vulnerability may cause audio devices to perform abnormally.

The hwPartsDFR module has a vulnerability in API calling verification. Successful exploitation of this vulnerability may affect device confidentiality.

The outdoor unit of Customer Premise Equipment (CPE) product B2338-168 V100R001C00 has a no authentication vulnerability on a certain port. After accessing the network between the indoor and outdoor units of the CPE, an attacker can deliver commands to the specific port of the outdoor unit and execute them without authentication. Successful exploit could allow the attacker to take control over the outdoor unit.

The outdoor unit of Customer Premise Equipment (CPE) product B2338-168 V100R001C00 has a no authentication vulnerability on the serial port. An attacker can access the serial port on the circuit board of the outdoor unit and log in to the CPE without authentication. Successful exploit could allow the attacker to take control over the outdoor unit.

WiMAX routers based on the MediaTek SDK (libmtk) that use a custom httpd plugin are vulnerable to an authentication bypass allowing a remote, unauthenticated attacker to gain administrator access to the device by performing an administrator password change on the device via a crafted POST request.

The POWER systems FSP is vulnerable to unauthenticated logins through the serial port/TTY interface. This vulnerability can be more critical if the serial port is connected to a serial-over-lan device. IBM X-Force ID: 217095.

VMware Workspace ONE Content contains a passcode bypass vulnerability. A malicious actor, with access to a users rooted device, may be able to bypass the VMware Workspace ONE Content passcode.

An issue was discovered on Nescomed Multipara Monitor M1000 devices. The physical UART debug port provides a shell, without requiring a password, with complete access.

A vulnerability in the Network Access Manager (NAM) module of Cisco Secure Client could allow an unauthenticated attacker with physical access to an affected device to elevate privileges to SYSTEM. This vulnerability is due to a lack of authentication on a specific function. A successful exploit could allow the attacker to execute arbitrary code with SYSTEM privileges on an affected device.

D-link DSL-2750U ISL2750UEME3.V1E devices allow approximately 90 seconds of access to the control panel, after a restart, before MAC address filtering rules become active.

TP-Link TL-WR840N EU v6.20 was discovered to contain insecure protections for its UART console. This vulnerability allows attackers to connect to the UART port via a serial connection and execute commands as the root user without authentication.

Simple Desktop Display Manager (SDDM) before 0.10.0 allows local users to log in as user "sddm" without authentication.

The Bosch software tools AccessIPConfig.exe and AmcIpConfig.exe are used to configure certains settings in AMC2 devices. The tool allows putting a password protection on configured devices to restrict access to the configuration of an AMC2. An attacker can circumvent this protection and make unauthorized changes to configuration data on the device. An attacker can exploit this vulnerability to manipulate the device\'s configuration or make it unresponsive in the local network. The attacker needs to have access to the local network, typically even the same subnet.

A vulnerability has been identified in TIA Administrator (All versions < V1.0 SP1 Upd1). The integrated configuration web application (TIA Administrator) allows to execute certain application commands without proper authentication. The vulnerability could be exploited by an attacker with local access to the affected system. Successful exploitation requires no privileges and no user interaction. An attacker could use the vulnerability to compromise confidentiality and integrity and availability of the affected system. At the time of advisory publication no public exploitation of this security vulnerability was known.

An issue was discovered in Epikur before 20.1.1. A Glassfish 4.1 server with a default configuration is running on TCP port 4848. No password is required to access it with the administrator account.

A CWE-306: Missing Authentication for Critical Function vulnerability exists in IGSS (Versions 14 and prior using the service: IGSSupdate), which could allow a local user to execute processes that otherwise require escalation privileges when sending local network commands to the IGSS Update Service.

In versions 4.18 and earlier of the Eclipse Platform, the Help Subsystem does not authenticate active help requests to the local help web server, allowing an unauthenticated local attacker to issue active help commands to the associated Eclipse Platform process or Eclipse Rich Client Platform process.

Dell EMC PowerScale OneFS versions 8.2.0 - 9.1.0 contain a privilege escalation vulnerability. A non-admin user with either ISI_PRIV_LOGIN_CONSOLE or ISI_PRIV_LOGIN_SSH may potentially exploit this vulnerability to read arbitrary data, tamper with system software or deny service to users. Note: no non-admin users or roles have these privileges by default.

An exploitable code execution vulnerability exists in the ss-manager binary of Shadowsocks-libev 3.3.2. Specially crafted network packets sent to ss-manager can cause an arbitrary binary to run, resulting in code execution and privilege escalation. An attacker can send network packets to trigger this vulnerability.

The bootloader of the homee Brain Cube V2 through 2.23.0 allows attackers with physical access to gain root access by manipulating the U-Boot environment via the CLI after connecting to the internal UART interface.

There exists an unauthenticated accessible JTAG port on the Kioxia PM6, PM7 and CM6 devices - On the Kioxia CM6, PM6 and PM7 disk drives it was discovered that the 2 main CPU cores of the SoC can be accessed via an open JTAG debug port that is exposed on the drive’s circuit board. Due to the wide cutout of the enclosures, the JTAG port can be accessed without having to open the disk enclosure. Utilizing the JTAG debug port, an attacker with (temporary) physical access can get full access to the firmware and memory on the 2 main CPU cores within the drive including the execution of arbitrary code, the modification of firmware execution flow and data or bypassing the firmware signature verification during boot-up.

NetApp OnCommand Unified Manager for Linux versions 7.2 though 7.3 ship with the Java Debug Wire Protocol (JDWP) enabled which allows unauthorized local attackers to execute arbitrary code.