CNCSoft-B Versions 1.0.0.3 and prior is vulnerable to an out-of-bounds write, which may allow an attacker to execute arbitrary code.

An Out-Of-Bounds Read Vulnerability in Autodesk FBX Review version 1.5.0 and prior may lead to code execution through maliciously crafted DLL files or information disclosure.

Delta Electronics DOPSoft Versions 4.0.10.17 and prior are vulnerable to an out-of-bounds read, which may allow an attacker to execute arbitrary code.

A remote code execution vulnerability due to incomplete check for 'xheader_decode_path_record' function's parameter length value in the ark library. Remote attackers can induce exploit malicious code using this function.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of Foxit PhantomPDF 10.1.0.37527. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of JPEG2000 images. The issue results from the lack of proper validation of user-supplied data, which can result in a read past the end of an allocated structure. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-12230.

A vulnerability has been identified in Solid Edge SE2020 (All Versions < SE2020MP13), Solid Edge SE2021 (All Versions < SE2021MP3). Affected applications lack proper validation of user-supplied data when parsing PAR files. This could result in an out of bounds read past the end of an allocated structure. An attacker could leverage this vulnerability to execute code in the context of the current process. (ZDI-CAN-12534)

Datakit Software libraries CatiaV5_3dRead, CatiaV6_3dRead, Step3dRead, Ug3dReadPsr, Jt3dReadPsr modules in KeyShot Versions v10.1 and prior are vulnerable to an out-of-bounds read, which may allow an attacker to execute arbitrary code.

A memory corruption vulnerability exists in the 3D annotation handling of Foxit PDF Reader due to insufficient bounds checking when parsing U3D data. When opening a PDF file containing malformed or specially crafted PRC content, out-of-bounds memory access may occur, resulting in memory corruption.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of Foxit PhantomPDF 10.1.0.37527. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the handling of U3D objects embedded in PDF files. The issue results from the lack of proper validation of user-supplied data, which can result in an out-of-bounds read condition. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-12438.

A maliciously crafted PDF file in Autodesk Navisworks 2019, 2020, 2021, 2022 can be forced to read beyond allocated boundaries when parsing the PDF file. This vulnerability can be exploited to execute arbitrary code.

A maliciously crafted PRT file, when linked or imported into certain Autodesk products, can force an Out-of-Bounds Read vulnerability. A malicious actor can leverage this vulnerability to cause a crash, read sensitive data, or execute arbitrary code in the context of the current process.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of Foxit PhantomPDF 10.1.0.37527. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the handling of U3D objects in PDF files. The issue results from the lack of proper validation of user-supplied data, which can result in a read past the end of an allocated structure. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-12269.

A memory corruption vulnerability exists in the 3D annotation handling of Foxit PDF Reader due to insufficient bounds checking when parsing PRC data. When opening a PDF file containing malformed or specially crafted PRC content, out-of-bounds memory access may occur, resulting in memory corruption.

A maliciously crafted PSD file, when linked or imported into Autodesk 3ds Max, can force an Out-of-Bounds Read vulnerability. A malicious actor can leverage this vulnerability to cause a crash, read sensitive data, or execute arbitrary code in the context of the current process.

A Out-Of-Bounds Read/Write Vulnerability in Autodesk FBX Review version 1.4.0 may lead to remote code execution through maliciously crafted DLL files or information disclosure.

A memory corruption vulnerability exists in the 3D annotation handling of Foxit PDF Reader due to insufficient bounds checking when parsing PRC data. When opening a PDF file containing malformed or specially crafted PRC content, out-of-bounds memory access may occur, resulting in memory corruption.

There is an out of bounds read vulnerability in NI LabVIEW in LVResFile::RGetMemFileHandle() when parsing a corrupted VI file. This vulnerability may result in information disclosure or arbitrary code execution. Successful exploitation requires an attacker to get a user to open a specially crafted VI. This vulnerability affects NI LabVIEW 2025 Q3 (25.3) and prior versions.

There is an out of bounds read vulnerability in NI LabVIEW in LVResFile::FindRsrcListEntry() when parsing a corrupted VI file. This vulnerability may result in information disclosure or arbitrary code execution. Successful exploitation requires an attacker to get a user to open a specially crafted VI. This vulnerability affects NI LabVIEW 2025 Q3 (25.3) and prior versions.

There is an out of bounds read vulnerability in NI LabVIEW in lvre!VisaWriteFromFile() when parsing a corrupted VI file. This vulnerability may result in information disclosure or arbitrary code execution. Successful exploitation requires an attacker to get a user to open a specially crafted VI. This vulnerability affects NI LabVIEW 2025 Q3 (25.3) and prior versions.

Acrobat Reader versions 24.001.30264, 20.005.30793, 25.001.20982, 24.001.30273, 20.005.30803 and earlier are affected by an out-of-bounds read vulnerability when parsing a crafted file, which could result in a read past the end of an allocated memory structure. An attacker could leverage this vulnerability to execute code in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

An Out-of-Bounds Read vulnerability is present in Ashlar-Vellum Cobalt, Xenon, Argon, Lithium, and Cobalt Share versions 12.6.1204.216 and prior that could allow an attacker to disclose information or execute arbitrary code when a specially crafted VC6 file is being parsed.

There is an out of bounds read vulnerability in NI LabVIEW in LVResource::DetachResource() when parsing a corrupted VI file. This vulnerability may result in information disclosure or arbitrary code execution. Successful exploitation requires an attacker to get a user to open a specially crafted VI. This vulnerability affects NI LabVIEW 2025 Q3 (25.3) and prior versions.

There is an out of bounds read vulnerability in NI LabVIEW in lvre!ExecPostedProcRecPost() when parsing a corrupted VI file. This vulnerability may result in information disclosure or arbitrary code execution. Successful exploitation requires an attacker to get a user to open a specially crafted VI. This vulnerability affects NI LabVIEW 2025 Q3 (25.3) and prior versions.

In BIND 9.5.0 -> 9.11.29, 9.12.0 -> 9.16.13, and versions BIND 9.11.3-S1 -> 9.11.29-S1 and 9.16.8-S1 -> 9.16.13-S1 of BIND Supported Preview Edition, as well as release versions 9.17.0 -> 9.17.1 of the BIND 9.17 development branch, BIND servers are vulnerable if they are running an affected version and are configured to use GSS-TSIG features. In a configuration which uses BIND's default settings the vulnerable code path is not exposed, but a server can be rendered vulnerable by explicitly setting values for the tkey-gssapi-keytab or tkey-gssapi-credential configuration options. Although the default configuration is not vulnerable, GSS-TSIG is frequently used in networks where BIND is integrated with Samba, as well as in mixed-server environments that combine BIND servers with Active Directory domain controllers. For servers that meet these conditions, the ISC SPNEGO implementation is vulnerable to various attacks, depending on the CPU architecture for which BIND was built: For named binaries compiled for 64-bit platforms, this flaw can be used to trigger a buffer over-read, leading to a server crash. For named binaries compiled for 32-bit platforms, this flaw can be used to trigger a server crash due to a buffer overflow and possibly also to achieve remote code execution. We have determined that standard SPNEGO implementations are available in the MIT and Heimdal Kerberos libraries, which support a broad range of operating systems, rendering the ISC implementation unnecessary and obsolete. Therefore, to reduce the attack surface for BIND users, we will be removing the ISC SPNEGO implementation in the April releases of BIND 9.11 and 9.16 (it had already been dropped from BIND 9.17). We would not normally remove something from a stable ESV (Extended Support Version) of BIND, but since system libraries can replace the ISC SPNEGO implementation, we have made an exception in this case for reasons of stability and security.

There is an out of bounds read vulnerability in NI LabVIEW in lvre!DataSizeTDR() when parsing a corrupted VI file. This vulnerability may result in information disclosure or arbitrary code execution. Successful exploitation requires an attacker to get a user to open a specially crafted VI. This vulnerability affects NI LabVIEW 2025 Q3 (25.3) and prior versions.

An out-of-bounds read vulnerability exists in VS6ComFile!load_link_inf of V-SFT v6.2.7.0 and earlier. Opening specially crafted V-SFT files may lead to information disclosure, affected system's abnormal end (ABEND), and arbitrary code execution.

Dimension versions 4.1.4 and earlier are affected by an out-of-bounds read vulnerability when parsing a crafted file, which could result in a read past the end of an allocated memory structure. An attacker could leverage this vulnerability to execute code in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

Luxion KeyShot versions prior to 10.1, Luxion KeyShot Viewer versions prior to 10.1, Luxion KeyShot Network Rendering versions prior to 10.1, and Luxion KeyVR versions prior to 10.1 are vulnerable to an out-of-bounds read while processing project files, which may allow an attacker to execute arbitrary code.

An out-of-bounds read vulnerability exists in VS6ComFile!get_ovlp_element_size of V-SFT v6.2.7.0 and earlier. Opening specially crafted V-SFT files may lead to information disclosure, affected system's abnormal end (ABEND), and arbitrary code execution.

Substance3D - Stager versions 3.1.4 and earlier are affected by an out-of-bounds read vulnerability when parsing a crafted file, which could result in a read past the end of an allocated memory structure. An attacker could leverage this vulnerability to execute code in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

An out-of-bounds read vulnerability exists in VS6ComFile!CSaveData::delete_mem of V-SFT v6.2.7.0 and earlier. Opening specially crafted V-SFT files may lead to information disclosure, affected system's abnormal end (ABEND), and arbitrary code execution.

Cscape (All versions prior to 9.90 SP3.5) lacks proper validation of user-supplied data when parsing project files. This could lead to an out-of-bounds read. An attacker could leverage this vulnerability to execute code in the context of the current process.

VT STUDIO versions 8.53 and prior contain an out-of-bounds read vulnerability. If the product uses a specially crafted file, arbitrary code may be executed on the affected product.

Dimension versions 4.1.4 and earlier are affected by an out-of-bounds read vulnerability when parsing a crafted file, which could result in a read past the end of an allocated memory structure. An attacker could leverage this vulnerability to execute code in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

Multiple out-of-bounds read issues have been identified in the way the application processes project files, allowing an attacker to craft a special project file that may allow arbitrary code execution on the Tellus Lite V-Simulator and V-Server Lite (versions prior to 4.0.10.0).

A CWE-125: Out-of-bounds read vulnerability exists inIGSS Definition (Def.exe) V15.0.0.21140 and prior that could result in loss of data or remote code execution due to missing length checks, when a malicious WSP file is being parsed by IGSS Definition.

Fatek FvDesigner Version 1.5.76 and prior is vulnerable to an out-of-bounds read while processing project files, allowing an attacker to craft a special project file that may permit arbitrary code execution.

A CWE-125: Out-of-bounds read vulnerability exists inIGSS Definition (Def.exe) V15.0.0.21140 and prior that could result in disclosure of information or remote code execution due to lack of sanity checks on user-supplied input data, when a malicious CGF file is imported to IGSS Definition.

A CWE-125: Out-of-bounds read vulnerability exists inIGSS Definition (Def.exe) V15.0.0.21140 and prior that could result in disclosure of information or remote code execution due to lack of user-supplied data validation, when a malicious CGF file is imported to IGSS Definition.

PDF-XChange Editor U3D File Parsing Out-Of-Bounds Read Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of PDF-XChange Editor. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of U3D files. The issue results from the lack of proper validation of user-supplied data, which can result in a read past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-20928.

PDF-XChange Editor U3D File Parsing Out-Of-Bounds Read Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of PDF-XChange Editor. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of U3D files. The issue results from the lack of proper validation of user-supplied data, which can result in a read past the end of an allocated object. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-20931.

An out-of-bounds read was addressed with improved bounds checking. This issue is fixed in macOS Big Sur 11.2, Security Update 2021-001 Catalina, Security Update 2021-001 Mojave, watchOS 7.3, tvOS 14.4, iOS 14.4 and iPadOS 14.4. Processing a maliciously crafted image may lead to arbitrary code execution.

Adobe Photoshop versions 22.5.8 (and earlier) and 23.4.2 (and earlier) are affected by an out-of-bounds read vulnerability when parsing a crafted file, which could result in a read past the end of an allocated memory structure. An attacker could leverage this vulnerability to execute code in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

An out-of-bounds read was addressed with improved input validation. This issue is fixed in macOS Big Sur 11.2, Security Update 2021-001 Catalina, Security Update 2021-001 Mojave, watchOS 7.3, tvOS 14.4, iOS 14.4 and iPadOS 14.4. Processing a maliciously crafted image may lead to arbitrary code execution.

An out-of-bounds read was addressed with improved input validation. This issue is fixed in macOS Big Sur 11.2, Security Update 2021-001 Catalina, Security Update 2021-001 Mojave, iOS 14.4 and iPadOS 14.4. Processing a maliciously crafted USD file may lead to unexpected application termination or arbitrary code execution.

An out-of-bounds read was addressed with improved bounds checking. This issue is fixed in macOS Big Sur 11.2, Security Update 2021-001 Catalina, Security Update 2021-001 Mojave, watchOS 7.3, tvOS 14.4, iOS 14.4 and iPadOS 14.4. A remote attacker may be able to cause arbitrary code execution.

An out-of-bounds read was addressed with improved input validation. This issue is fixed in macOS Big Sur 11.2, Security Update 2021-001 Catalina, Security Update 2021-001 Mojave. Processing a maliciously crafted image may lead to arbitrary code execution.

An out-of-bounds read was addressed with improved bounds checking. This issue is fixed in macOS Big Sur 11.2, Security Update 2021-001 Catalina, Security Update 2021-001 Mojave, watchOS 7.3, tvOS 14.4, iOS 14.4 and iPadOS 14.4. Processing a maliciously crafted image may lead to arbitrary code execution.

An out-of-bounds read was addressed with improved input validation. This issue is fixed in macOS Big Sur 11.2, Security Update 2021-001 Catalina, Security Update 2021-001 Mojave, tvOS 14.4, iOS 14.4 and iPadOS 14.4. Processing a maliciously crafted image may lead to arbitrary code execution.

An out-of-bounds read was addressed with improved bounds checking. This issue is fixed in macOS Big Sur 11.3, iOS 14.5 and iPadOS 14.5, watchOS 7.4, tvOS 14.5. Processing a maliciously crafted image may lead to arbitrary code execution.