An issue was discovered in MB CONNECT LINE mymbCONNECT24 and mbCONNECT24 through 2.6.2. There is an incomplete XSS filter allowing an attacker to inject crafted malicious code into the page.

Certain NETGEAR devices are affected by stored XSS. This affects D7800 before 1.0.1.56, R7500v2 before 1.0.3.46, R7800 before 1.0.2.74, R8900 before 1.0.4.28, R9000 before 1.0.4.28, RAX120 before 1.0.0.78, RBK50 before 2.3.5.30, RBR50 before 2.3.5.30, RBS50 before 2.3.5.30, XR500 before 2.3.2.56, and XR700 before 1.0.1.10.

Certain NETGEAR devices are affected by stored XSS. This affects D7800 before 1.0.1.56, R7500v2 before 1.0.3.46, R7800 before 1.0.2.74, R8900 before 1.0.4.28, R9000 before 1.0.4.28, RAX120 before 1.0.0.78, RBR20 before 2.3.5.26, RBR20 before 2.3.5.26, RBS20 before 2.3.5.26, RBK40 before 2.3.5.30, RBR40 before 2.3.5.30, RBS40 before 2.3.5.30, RBK50 before 2.3.5.30, RBR50 before 2.3.5.30, RBS50 before 2.3.5.30, XR500 before 2.3.2.56, and XR700 before 1.0.1.10.

An issue was discovered in zzcms2020. There is a XSS vulnerability that can insert and execute JS code arbitrarily via /user/manage.php.

A vulnerability in the web-based management interface of the Cisco SD-WAN vManage Software could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the interface. The vulnerability exists because the web-based management interface does not properly validate user-supplied input. An attacker could exploit this vulnerability by persuading a user to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or access sensitive, browser-based information.

Cross Site Scripting vulnerability found in Chamilo Lms v.1.11.18 allows a local attacker to execute arbitrary code via the resource sequencing parameters.

Certain NETGEAR devices are affected by stored XSS. This affects D7800 before 1.0.1.56, R7500v2 before 1.0.3.46, R7800 before 1.0.2.74, R8900 before 1.0.4.28, R9000 before 1.0.4.28, RAX120 before 1.0.0.78, XR500 before 2.3.2.56, and XR700 before 1.0.1.10.

A storage XSS vulnerability is found in YzmCMS v5.8, which can be used by attackers to inject JS code and attack malicious XSS on the /admin/system_manage/user_config_edit.html page.

A vulnerability in the web-based management interface of Cisco Data Center Network Manager (DCNM) could allow an authenticated, remote attacker with administrative credentials to conduct a cross-site scripting (XSS) attack against a user of the interface. The vulnerability is due to insufficient input validation by the web-based management interface. An attacker could exploit this vulnerability by inserting malicious data into a specific data field in the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit this vulnerability, the attacker would need administrative credentials on the affected device.

Certain NETGEAR devices are affected by stored XSS. This affects D7800 before 1.0.1.56, R7500v2 before 1.0.3.46, R7800 before 1.0.2.74, R8900 before 1.0.4.28, R9000 before 1.0.4.28, RAX120 before 1.0.0.78, RBK50 before 2.3.5.30, RBR50 before 2.3.5.30, RBS50 before 2.3.5.30, XR500 before 2.3.2.56, and XR700 before 1.0.1.10.

Certain NETGEAR devices are affected by stored XSS. This affects D7800 before 1.0.1.56, R7500v2 before 1.0.3.46, R7800 before 1.0.2.74, R8900 before 1.0.4.28, R9000 before 1.0.4.28, RAX120 before 1.0.0.78, RBK40 before 2.3.5.30, RBR40 before 2.3.5.30, RBS40 before 2.3.5.30, RBK20 before 2.3.5.26, RBR20 before 2.3.5.26, RBS20 before 2.3.5.26, RBK50 before 2.3.5.30, RBR50 before 2.3.5.30, RBS50 before 2.3.5.30, XR500 before 2.3.2.56, and XR700 before 1.0.1.10.

A vulnerability in the web-based management interface of Cisco Data Center Network Manager (DCNM) could allow an authenticated, remote attacker with administrative credentials to conduct a cross-site scripting (XSS) attack against a user of the interface. The vulnerability is due to insufficient input validation by the web-based management interface. An attacker could exploit this vulnerability by inserting malicious data into a specific data field in the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit this vulnerability, the attacker would need administrative credentials on the affected device.

Optimizely CMS UI before v12.16.0 was discovered to contain a cross-site scripting (XSS) vulnerability via the Admin panel.

Certain NETGEAR devices are affected by stored XSS. This affects D7800 before 1.0.1.56, R7800 before 1.0.2.74, R8900 before 1.0.4.28, R9000 before 1.0.4.28, RAX120 before 1.0.0.78, RBK20 before 2.3.5.26, RBR20 before 2.3.5.26, RBS20 before 2.3.5.26, RBK40 before 2.3.5.30, RBR40 before 2.3.5.30, RBS40 before 2.3.5.30, RBK50 before 2.3.5.30, RBR50 before 2.3.5.30, RBS50 before 2.3.5.30, XR500 before 2.3.2.56, and XR700 before 1.0.1.10.

Certain NETGEAR devices are affected by stored XSS. This affects D6200 before 1.1.00.38, D7000 before 1.0.1.78, JNR1010v2 before 1.1.0.62, JR6150 before 1.0.1.24, JWNR2010v5 before 1.1.0.62, R6020 before 1.0.0.42, R6050 before 1.0.1.24, R6080 before 1.0.0.42, R6120 before 1.0.0.66, R6220 before 1.1.0.100, R6260 before 1.1.0.76, WNR1000v4 before 1.1.0.62, WNR2020 before 1.1.0.62, and WNR2050 before 1.1.0.62.

Multiple vulnerabilities in the web-based management interface of Cisco Data Center Network Manager (DCNM) could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the interface on an affected device. These vulnerabilities are due to insufficient validation of user-supplied input by the web-based management interface. An attacker could exploit these vulnerabilities by persuading a user of the interface to click a customized link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or access sensitive browser-based information.

A vulnerability in the web-based management interface of Cisco Data Center Network Manager (DCNM) Software could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the interface of the affected software. The vulnerability exists because the web-based management interface does not properly validate user-supplied input. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information.

Savsoft Quiz 5 is affected by: Cross Site Scripting (XSS) via field_title (aka a title on the custom fields page).

A vulnerability in the web-based management interface of the Cisco SD-WAN vManage Software could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the interface. The vulnerability exists because the web-based management interface does not properly validate user-supplied input. An attacker could exploit this vulnerability by persuading a user to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or access sensitive, browser-based information.

zonote through 0.4.0 allows XSS via a crafted note, with resultant Remote Code Execution (because nodeIntegration in webPreferences is true).

The limit-login-attempts-reloaded plugin before 2.17.4 for WordPress allows wp-admin/options-general.php?page=limit-login-attempts&tab= XSS. A malicious user can cause an administrator user to supply dangerous content to the vulnerable page, which is then reflected back to the user and executed by the web browser. The most common mechanism for delivering malicious content is to include it as a parameter in a URL that is posted publicly or e-mailed directly to victims.

bloofoxCMS 0.5.2.1 is infected with XSS that allows remote attackers to execute arbitrary JS/HTML Code.

Daybyday 2.1.0 allows stored XSS via the Title parameter to the New Lead screen.

SolarWinds Serv-U before 15.2.2 allows authenticated reflected XSS.

FlatPress 1.0.3 is affected by cross-site scripting (XSS) in the Blog Content component. This vulnerability can allow an attacker to inject the XSS payload in Blog content via the admin panel. Each time any user will go to that blog page, the XSS triggers and the attacker can steal the cookie according to the crafted payload.

A vulnerability in the web-based management interface of Cisco Firepower Management Center could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected device. An attacker could exploit this vulnerability by first entering input within the web-based management interface and then persuading a user of the interface to view the crafted input within the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information.

A vulnerability in the web-based management interface of Cisco Identity Services Engine (ISE) Software could allow an authenticated, remote attacker with administrative credentials to conduct a cross-site scripting (XSS) attack against a user of the interface. The vulnerability exists because the web-based management interface does not properly validate user-supplied input. An attacker could exploit this vulnerability by injecting malicious code into specific pages of the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or access sensitive, browser-based information. To exploit this vulnerability, an attacker would need to have valid administrative credentials.

An XSS issue has been discovered in phpLDAPadmin before 1.2.6.2 that allows users to store malicious values that may be executed by other users at a later time via get_request in lib/function.php.

In WS_FTP Server version prior to 8.8.2, a stored cross-site scripting (XSS) vulnerability exists in WS_FTP Server's Management module. An attacker with administrative privileges could import a SSL certificate with malicious attributes containing cross-site scripting payloads.  Once the cross-site scripting payload is successfully stored,  an attacker could leverage this vulnerability to target WS_FTP Server admins with a specialized payload which results in the execution of malicious JavaScript within the context of the victims browser.

Certain NETGEAR devices are affected by stored XSS. This affects D7800 before 1.0.1.56, RBK50 before 2.3.5.30, RBR50 before 2.3.5.30, RBS50 before 2.3.5.30, RBK40 before 2.3.5.30, RBR40 before 2.3.5.30, RBS40 before 2.3.5.30, RBK20 before 2.3.5.26, RBR20 before 2.3.5.26, RBS20 before 2.3.5.26, XR700 before 1.0.1.10, R7500v2 before 1.0.3.46, R7800 before 1.0.2.74, R8900 before 1.0.4.28, R9000 before 1.0.4.28, XR500 before 2.3.2.56, and RAX120 before 1.0.0.78.

Certain NETGEAR devices are affected by stored XSS. This affects D7800 before 1.0.1.56, R7500v2 before 1.0.3.46, R7800 before 1.0.2.74, R8900 before 1.0.4.28, R9000 before 1.0.4.28, RAX120 before 1.0.0.78, RBK50 before 2.3.5.30, RBR50 before 2.3.5.30, RBS50 before 2.3.5.30, XR500 before 2.3.2.56, and XR700 before 1.0.1.10.

Cross-site scripting (XSS) vulnerability in models/list-table.php in the FV Flowplayer Video Player plugin before 7.4.37.727 for WordPress allows remote authenticated users to inject arbitrary web script or HTML via the fv_wp_fvvideoplayer_src JSON field in the data parameter.

Certain NETGEAR devices are affected by stored XSS. This affects D7800 before 1.0.1.56, R7500v2 before 1.0.3.46, R7800 before 1.0.2.68, R8900 before 1.0.4.28, R9000 before 1.0.4.28, RAX120 before 1.0.0.78, RBK20 before 2.3.5.26, RBR20 before 2.3.5.26, RBS20 before 2.3.5.26, RBK40 before 2.3.5.30, RBR40 before 2.3.5.30, RBS40 before 2.3.5.30, RBK50 before 2.3.5.30, RBR50 before 2.3.5.30, RBS50 before 2.3.5.30, XR500 before 2.3.2.56, and XR700 before 1.0.1.10.

Certain NETGEAR devices are affected by stored XSS. This affects R7000 before 1.0.11.110, R7900 before 1.0.4.30, R8000 before 1.0.4.62, RAX15 before 1.0.2.82, RAX20 before 1.0.2.82, RAX200 before 1.0.3.106, RAX75 before 1.0.3.106, and RAX80 before 1.0.3.106.

A Stored Cross Site Scripting (XSS) vulnerability exists in Sourcecodester Vehicle Service Management System 1.0 via the Settings Section in login panel.

Ignite Realtime Openfire 4.6.0 has create-bookmark.jsp users Stored XSS.

Ignite Realtime Openfire 4.6.0 has create-bookmark.jsp groupchatJID Stored XSS.

Reflected XSS in Quest Policy Authority 8.1.2.200 allows remote attackers to inject malicious code into the browser via a specially crafted link to the ReportPreview.do file via the referer parameter. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

Improper Neutralization of Input During Web Page Generation ("Cross-site Scripting") vulnerability in Drupal AT Internet Piano Analytics allows Cross-Site Scripting (XSS).This issue affects AT Internet Piano Analytics: from 0.0.0 before 1.0.1, from 2.0.0 before 2.3.1.

A Stored XSS exists in TinyFileManager All version up to and including 2.4.6 in /tinyfilemanager.php when the server is given a file that contains HTML and javascript in its name. A malicious user can upload a file with a malicious filename containing javascript code and it will run on any user browser when they access the server.

livehelperchat is vulnerable to Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting')

Certain NETGEAR devices are affected by stored XSS. This affects D7800 before 1.0.1.56, R7500v2 before 1.0.3.46, R7800 before 1.0.2.74, R8900 before 1.0.4.28, R9000 before 1.0.4.28, RAX120 before 1.0.0.78, RBK50 before 2.3.5.30, RBR50 before 2.3.5.30, RBS50 before 2.3.5.30, XR500 before 2.3.2.56, and XR700 before 1.0.1.10.

Certain NETGEAR devices are affected by stored XSS. This affects D6200 before 1.1.00.38, D7000 before 1.0.1.78, JNR1010v2 before 1.1.0.62, JR6150 before 1.0.1.24, JWNR2010v5 before 1.1.0.62, R6020 before 1.0.0.42, R6050 before 1.0.1.24, R6080 before 1.0.0.42, R6120 before 1.0.0.66, R6220 before 1.1.0.100, R6260 before 1.1.0.76, R6700v2 before 1.2.0.62, R6800 before 1.2.0.62, R6900v2 before 1.2.0.62, R7450 before 1.2.0.62, WNR1000v4 before 1.1.0.62, WNR2020 before 1.1.0.62, and WNR2050 before 1.1.0.62.

A cross-site scripting (XSS) vulnerability in the administration web panel on NETGEAR JGS516PE/GS116Ev2 v2.6.0.43 devices allows remote attackers to inject arbitrary web script or HTML via the language parameter.

FluxBB 1.5.11 is affected by cross-site scripting (XSS in the Blog Content component. This vulnerability can allow an attacker to inject the XSS payload in "Blog Content" and each time any user will visit the blog, the XSS triggers and the attacker can able to steal the cookie according to the crafted payload.

Certain NETGEAR devices are affected by stored XSS. This affects D7800 before 1.0.1.56, R7500v2 before 1.0.3.46, R7800 before 1.0.2.74, R8900 before 1.0.4.28, R9000 before 1.0.4.28, RAX120 before 1.0.0.78, RBK20 before 2.3.5.26, RBR20 before 2.3.5.26, RBS20 before 2.3.5.26, RBK40 before 2.3.5.30, RBR40 before 2.3.5.30, RBS40 before 2.3.5.30, RBK50 before 2.3.5.30, RBR50 before 2.3.5.30, RBS50 before 2.3.5.30, XR500 before 2.3.2.56, and XR700 before 1.0.1.10.

Certain NETGEAR devices are affected by stored XSS. This affects D6200 before 1.1.00.38, D7000 before 1.0.1.78, JNR1010v2 before 1.1.0.62, JR6150 before 1.0.1.24, JWNR2010v5 before 1.1.0.62, R6020 before 1.0.0.42, R6050 before 1.0.1.24, R6080 before 1.0.0.42, R6120 before 1.0.0.66, R6220 before 1.1.0.100, R6260 before 1.1.0.76, WNR1000v4 before 1.1.0.62, WNR2020 before 1.1.0.62, and WNR2050 before 1.1.0.62.

In XE 1.116, when uploading the Normal button, there is no restriction on the file suffix, which leads to any file uploading to the files directory. Since .htaccess only restricts the PHP type, uploading HTML-type files leads to stored XSS vulnerabilities. If the .htaccess configuration is improper, for example before the XE 1.11.2 version, you can upload the PHP type file to GETSHELL.

Auth. (admin+) Stored Cross-Site Scripting (XSS) vulnerability in Essitco AFFILIATE Solution plugin <= 1.0 versions.

NETGEAR R7000 devices before 1.0.9.88 are affected by stored XSS.