XWiki Platform is a generic wiki platform offering runtime services for applications built on top of it. The create action is vulnerable to a CSRF attack, allowing script and thus remote code execution when targeting a user with script/programming right, thus compromising the confidentiality, integrity and availability of the whole XWiki installation. When a user with script right views this image and a log message `ERROR foo - Script executed!` appears in the log, the XWiki installation is vulnerable. This has been patched in XWiki 14.10.9 and 15.4RC1 by requiring a CSRF token for the actual page creation.

Cross-site request forgery (CSRF) vulnerability in saveRestore.htm on the Quantum Scalar i500 tape library with firmware before i7.0.3 (604G.GS00100), also distributed as the Dell ML6000 tape library with firmware before A20-00 (590G.GS00100), allows remote attackers to hijack the authentication of users for requests that execute Linux commands via the fileName parameter, related to a "command-injection vulnerability."

PHP Scripts Mall Online Food Ordering Script 1.0 has Cross-Site Request Forgery (CSRF) in my-account.php.

Cross-site request forgery (CSRF) vulnerability in Advantech/BroadWin WebAccess 7.0 allows remote authenticated users to hijack the authentication of unspecified victims via unknown vectors. NOTE: this vulnerability exists because of an incomplete fix for CVE-2012-0235.

A remote code execution vulnerability exists in Magento 2.2 prior to 2.2.10, Magento 2.3 prior to 2.3.3 or 2.3.2-p1. An authenticated user can craft a malicious CSRF payload that can result in arbitrary command execution.

On BIG-IP ASM 11.5.1-11.5.8, 11.6.1-11.6.3, 12.1.0-12.1.3, 13.0.0-13.1.1.3, and 14.0.0-14.0.0.2, there is a stored cross-site scripting vulnerability in an ASM violation viewed in the Configuration utility. In the worst case, an attacker can store a CSRF which results in code execution as the admin user.

Osprey Pump Controller version 1.01 allows users to perform certain actions via HTTP requests without performing any checks to verify the requests. This may allow an attacker to perform certain actions with administrative privileges if a logged-in user visits a malicious website.

The cross-site request forgery token in the request may be predictable or easily guessable allowing attackers to craft a malicious request, which could be triggered by a victim unknowingly. In a successful CSRF attack, the attacker could lead the victim user to carry out an action unintentionally.

tianti v2.3 was discovered to contain a Cross-Site Request Forgery (CSRF) via the component /user/ajax/upd/status. This vulnerability allows attackers to execute arbitrary operations via a crafted GET or POST request.

Wangmarket v4.10 to v5.0 was discovered to contain a Cross-Site Request Forgery (CSRF) via the component /controller/UserController.java.

A Cross-Site Request Forgery (CSRF) in the component /admin/users/user.form of Openmrs 2.4.3 Build 0ff0ed allows attackers to execute arbitrary operations via a crafted request. In this case, an attacker could elevate a low-privileged account to an administrative role by leveraging the CSRF vulnerability at the /admin/users/user.form endpoint.

The "301 Redirects - Easy Redirect Manager" plugin before 2.45 for WordPress allows users (with subscriber or greater access) to modify, delete, or inject redirect rules, and exploit XSS, with the /admin-ajax.php?action=eps_redirect_save and /admin-ajax.php?action=eps_redirect_delete actions. This could result in a loss of site availability, malicious redirects, and user infections. This could also be exploited via CSRF.

FrogCMS v0.9.5 was discovered to contain a Cross-Site Request Forgery (CSRF) via /admin/?/user/add

Cross-site request forgery (CSRF) vulnerability in the clickthrough tracking functionality in the Forward module 6.x-1.x before 6.x-1.21 and 7.x-1.x before 7.x-1.3 for Drupal allows remote attackers to hijack the authentication of administrators for requests that increase node rankings via the tracking code, possibly related to improper "flood control."

Cross-site request forgery (CSRF) vulnerability in Flyspray 0.9.9.6 allows remote attackers to hijack the authentication of admins for requests that add admin accounts via an admin.newuser action to index.php.

Multiple cross-site request forgery (CSRF) vulnerabilities in TangoCMS before 2.2.0 allow remote attackers to hijack the authentication of administrators.

The issue was addressed with improved memory handling. This issue is fixed in watchOS 11.5, tvOS 18.5, iOS 18.5 and iPadOS 18.5, macOS Sequoia 15.5, visionOS 2.5, Safari 18.5. Processing maliciously crafted web content may lead to memory corruption.

In Jenkins 2.399 and earlier, LTS 2.387.3 and earlier, POST requests are sent in order to load the list of context actions. If part of the URL includes insufficiently escaped user-provided values, a victim may be tricked into sending a POST request to an unexpected endpoint by opening a context menu.

Multiple cross-site request forgery (CSRF) vulnerabilities in Mibew Messenger 1.6.4 and earlier allow remote attackers to hijack the authentication of operators for requests that insert cross-site scripting (XSS) sequences via the (1) address or (2) threadid parameters to operator/ban.php; or (3) geolinkparams, (4) title, or (5) chattitle parameters to operator/settings.php.

A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) could allow an authenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack and perform arbitrary actions on an affected device. The vulnerability is due to insufficient CSRF protections for the web-based management interface of the affected device. An attacker could exploit this vulnerability by persuading a user to follow a malicious link. A successful exploit could allow the attacker to use a web browser and the privileges of the user to perform arbitrary actions on the affected device.

An issue was discovered in Dolibarr 11.0.0-alpha. A user can store an IFRAME element (containing a user/card.php CSRF request) in his Linked Files settings page. When visited by the admin, this could completely take over the admin account. (The protection mechanism for CSRF is to check the Referer header; however, because the attack is from one of the application's own settings pages, this mechanism is bypassed.)

Multiple cross-site request forgery (CSRF) vulnerabilities in IBM Rational AppScan Enterprise 5.x and 8.x before 8.5.0.1 allow remote attackers to hijack the authentication of administrators for requests that create administrative accounts.

A flaw was found in the Keycloak REST API before version 8.0.0 where it would permit user access from a realm the user was not configured. An authenticated attacker with knowledge of a user id could use this flaw to access unauthorized information or to carry out further attacks.

Cross Site Request Forgery (CSRF) vulnerability in Archer Platform before v.6.13 and fixed in v.6.12.0.6 and v.6.13.0 allows an authenticated attacker to execute arbitrary code via a crafted request.

Rubygems is a package registry used to supply software for the Ruby language ecosystem. Due to a bug in the yank action, it was possible for any RubyGems.org user to remove and replace certain gems even if that user was not authorized to do so. To be vulnerable, a gem needed: one or more dashes in its name creation within 30 days OR no updates for over 100 days At present, we believe this vulnerability has not been exploited. RubyGems.org sends an email to all gem owners when a gem version is published or yanked. We have not received any support emails from gem owners indicating that their gem has been yanked without authorization. An audit of gem changes for the last 18 months did not find any examples of this vulnerability being used in a malicious way. A deeper audit for any possible use of this exploit is ongoing, and we will update this advisory once it is complete. Using Bundler in --frozen or --deployment mode in CI and during deploys, as the Bundler team has always recommended, will guarantee that your application does not silently switch to versions created using this exploit. To audit your application history for possible past exploits, review your Gemfile.lock and look for gems whose platform changed when the version number did not change. For example, gemname-3.1.2 updating to gemname-3.1.2-java could indicate a possible abuse of this vulnerability. RubyGems.org has been patched and is no longer vulnerable to this issue as of the 5th of May 2022.

TYPO3 is a free and open source Content Management Framework. A vulnerability has been identified in the backend user interface functionality involving deep links. Specifically, this functionality is susceptible to Cross-Site Request Forgery (CSRF). Additionally, state-changing actions in downstream components incorrectly accepted submissions via HTTP GET and did not enforce the appropriate HTTP method. Successful exploitation of this vulnerability requires the victim to have an active session on the backend user interface and to be deceived into interacting with a malicious URL targeting the backend, which can occur under the following conditions: The user opens a malicious link, such as one sent via email. The user visits a compromised or manipulated website while the following settings are misconfigured: 1. `security.backend.enforceReferrer` feature is disabled, 2. `BE/cookieSameSite` configuration is set to lax or none. The vulnerability in the affected downstream component “Scheduler Module” allows attackers to trigger pre-defined command classes - which can lead to unauthorized import or export of data in the worst case. Users are advised to update to TYPO3 versions 11.5.42 ELTS which fixes the problem described. There are no known workarounds for this vulnerability.

PTC Vuforia Studio does not require a token; this could allow an attacker with local access to perform a cross-site request forgery attack or a replay attack.

The Groundhogg plugin for WordPress is vulnerable to Cross-Site Request Forgery in versions up to, and including, 2.7.9.8. This is due to missing nonce validation in the 'ajax_edit_contact' function. This makes it possible for authenticated attackers to receive the auto login link via shortcode and then modify the assigned user to the auto login link to elevate verified user privileges via a forged request granted they can trick a site administrator into performing an action such as clicking on a link.

Multiple cross-site request forgery (CSRF) vulnerabilities in Streber before 0.08093 allow remote attackers to hijack the authentication of unspecified victims via unknown vectors.

Cross-site request forgery (CSRF) vulnerability in Harmoni before 1.6.0 allows remote attackers to make administrative modifications via a (1) save or (2) delete action to an unspecified component.

Cross-site request forgery (CSRF) vulnerability in esop/toolkit/profile/regData.do in Bravo Tejari Procurement Portal allows remote authenticated users to hijack the authentication of application users for requests that modify their personal data by leveraging lack of anti-CSRF tokens.

Certain NETGEAR devices are affected by CSRF. This affects WAC120 before 2.1.7, WAC505 before 5.0.5.4, WAC510 before 5.0.5.4, WNAP320 before 3.7.11.4, WNAP210v2 before 3.7.11.4, WNDAP350 before 3.7.11.4, WNDAP360 before 3.7.11.4, WNDAP660 before 3.7.11.4, WNDAP620 before 2.1.7, WND930 before 2.1.5, and WN604 before 3.3.10.

A Cross-Site Request Forgery (CSRF) vulnerability was found in Kashipara Music Management System v1.0 via a crafted request to the /music/ajax.php?action=save_user page.

Subsonic V6.1.5 allows internetRadioSettings.view streamUrl CSRF, with resultant SSRF.

Istio is an open platform to connect, manage, and secure microservices. In versions 1.12.0 and 1.12.1 Istio is vulnerable to a privilege escalation attack. Users who have `CREATE` permission for `gateways.gateway.networking.k8s.io` objects can escalate this privilege to create other resources that they may not have access to, such as `Pod`. This vulnerability impacts only an Alpha level feature, the Kubernetes Gateway API. This is not the same as the Istio Gateway type (gateways.networking.istio.io), which is not vulnerable. Users are advised to upgrade to resolve this issue. Users unable to upgrade should implement any of the following which will prevent this vulnerability: Remove the gateways.gateway.networking.k8s.io CustomResourceDefinition, set PILOT_ENABLE_GATEWAY_API_DEPLOYMENT_CONTROLLER=true environment variable in Istiod, or remove CREATE permissions for gateways.gateway.networking.k8s.io objects from untrusted users.

Cross-site request forgery (CSRF) vulnerability in edit.php in the MS TopSites add-on for PHP-Nuke does not verify that the uname parameter matches the current account, which allows remote authenticated users to change arbitrary accounts or change the SiteTitleName field as an arbitrary user via a modified uname value in an edit action to modules.php.

A vulnerability in the web-based management interface of Cisco Unified Communications Manager (Unified CM) Software and Cisco Unified CM Session Management Edition (SME) Software could allow an authenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack on an affected device. This vulnerability is due to insufficient CSRF protections for the web-based management interface on an affected device. An attacker could exploit this vulnerability by persuading a user of the interface to click a malicious link. A successful exploit could allow the attacker to perform arbitrary actions with the privilege level of the affected user.

xunfeng 0.2.0 allows command execution via CSRF because masscan.py mishandles backquote characters, a related issue to CVE-2018-16832.

A vulnerability in the web-based management interface of Cisco Energy Management Suite Software could allow an authenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack and perform arbitrary actions on an affected device. The vulnerability is due to insufficient CSRF protections for the web-based management interface of an affected device. An attacker could exploit this vulnerability by persuading an authenticated user of the interface to follow a crafted link. A successful exploit could allow the attacker to perform arbitrary actions on a targeted device via a web browser and with the privileges of the user.

PHP Scripts Mall advanced-real-estate-script 4.0.9 has CSRF via edit-profile.php.

Cross-Site Request Forgery (CSRF) in Packagist yetiforce/yetiforce-crm prior to 6.3.0.

An issue has been discovered in GitLab affecting all versions starting from 7.7 before 14.4.5, all versions starting from 14.5.0 before 14.5.3, all versions starting from 14.6.0 before 14.6.2. GitLab was vulnerable to a Cross-Site Request Forgery attack that allows a malicious user to have their GitHub project imported on another GitLab user account.

PHP Scripts Mall Website Seller Script 2.0.3 has CSRF via user_submit.php?upd=2, with resultant XSS.

An issue was discovered in YzmCMS 3.8. There is a CSRF vulnerability that can add a tag via /index.php/admin/tag/add.html.

public/rolechangeadmin in Faveo 1.9.3 allows CSRF. The impact is obtaining admin privileges.

An issue was discovered on Securifi Almond, Almond+, and Almond 2015 devices with firmware AL-R096. The device provides a user with the capability of blocking IP addresses using the web management interface. It seems that the device does not implement any cross-site scripting forgery protection mechanism which allows an attacker to trick a user who is logged in to the web management interface into executing a cross-site scripting payload on the user's browser and execute any action on the device provided by the web management interface.

Rundeck is an open source automation service with a web console, command line tools and a WebAPI. Prior to version 3.3.14 and version 3.4.3, a user with `admin` access to the `system` resource type is potentially vulnerable to a CSRF attack that could cause the server to run untrusted code on all Rundeck editions. Patches are available in Rundeck versions 3.4.3 and 3.3.14.

Several REST service endpoints of Apache Archiva are not protected against Cross Site Request Forgery (CSRF) attacks. A malicious site opened in the same browser as the archiva site, may send an HTML response that performs arbitrary actions on archiva services, with the same rights as the active archiva session (e.g. administrator rights).

An issue was discovered in the FileImporter extension in MediaWiki through 1.36. For certain relaxed configurations of the $wgFileImporterRequiredRight variable, it might not validate all appropriate user rights, thus allowing a user with insufficient rights to perform operations (specifically file uploads) that they should not be allowed to perform.

Cross-Site Request Forgery (CSRF) in the Basic Settings screen on Vonage (Grandstream) HT802 devices allows attackers to modify settings, related to cgi-bin/update.