An access control issue in Wavlink WN533A8 M33A8.V5030.190716 allows attackers to obtain usernames and passwords via view-source:http://IP_ADDRESS/sysinit.shtml?r=52300 and searching for [logincheck(user);].

A flaw was found in Gateway. Sending a non-base64 'basic' auth with special characters can cause APICast to incorrectly authenticate a request. A malformed basic authentication header containing special characters bypasses authentication and allows unauthorized access to the backend. This issue can occur due to a failure in the base64 decoding process, which causes APICast to skip the rest of the authentication checks and proceed with routing the request upstream.

UnsafeAccessor (UA) is a bridge to access jdk.internal.misc.Unsafe & sun.misc.Unsafe. Normally, if UA is loaded as a named module, the internal data of UA is protected by JVM and others can only access UA via UA's standard API. The main application can set up `SecurityCheck.AccessLimiter` for UA to limit access to UA. Starting with version 1.4.0 and prior to version 1.7.0, when `SecurityCheck.AccessLimiter` is set up, untrusted code can access UA without limitation, even when UA is loaded as a named module. This issue does not affect those for whom `SecurityCheck.AccessLimiter` is not set up. Version 1.7.0 contains a patch.

An improper authorization vulnerability exists in Jenkins Mercurial Plugin version 2.2 and earlier in MercurialStatus.java that allows an attacker with network access to obtain a list of nodes and users.

An improper authorization vulnerability exists in Jenkins Git Plugin version 3.7.0 and earlier in GitStatus.java that allows an attacker with network access to obtain a list of nodes and users.

An improper authorization vulnerability exists in Jenkins Subversion Plugin version 2.10.2 and earlier in SubversionStatus.java and SubversionRepositoryStatus.java that allows an attacker with network access to obtain a list of nodes and users.

A vulnerability has been identified in SIMATIC Drive Controller family (All versions < V2.9.2), SIMATIC ET 200SP Open Controller CPU 1515SP PC2 (incl. SIPLUS variants) (All versions < V21.9), SIMATIC S7 PLCSIM Advanced (All versions > V2 < V4), SIMATIC S7-1200 CPU family (incl. SIPLUS variants) (Version V4.4), SIMATIC S7-1500 CPU family (incl. related ET200 CPUs and SIPLUS variants) (All versions > V2.5 < V2.9.2), SIMATIC S7-1500 Software Controller (All versions > V2.5 < V21.9), TIM 1531 IRC (incl. SIPLUS NET variants) (Version V2.1). Due to an incorrect authorization check in the affected component, an attacker could extract information about access protected PLC program variables over port 102/tcp from an affected device when reading multiple attributes at once.

The OWASP ModSecurity Core Rule Set (CRS) is affected by a response body bypass to sequentially exfiltrate small and undetectable sections of data by repeatedly submitting an HTTP Range header field with a small byte range. A restricted resource, access to which would ordinarily be detected, may be exfiltrated from the backend, despite being protected by a web application firewall that uses CRS. Short subsections of a restricted resource may bypass pattern matching techniques and allow undetected access. The legacy CRS versions 3.0.x and 3.1.x are affected, as well as the currently supported versions 3.2.1 and 3.3.2. Integrators and users are advised to upgrade to 3.2.2 and 3.3.3 respectively and to configure a CRS paranoia level of 3 or higher.

python_book V1.0 is vulnerable to Incorrect Access Control, which allows attackers to obtain sensitive information of users with different IDs by modifying the ID parameter.

A vulnerability has been identified in SIMATIC CP 1543-1 V4.0 (6GK7543-1AX10-0XE0) (All versions >= V4.0.44 < V4.0.50). Affected devices do not properly handle authorization. This could allow an unauthenticated remote attacker to gain access to the filesystem.

The REST API functions in TeamPass 2.1.27.36 allow any user with a valid API token to bypass IP address whitelist restrictions via an X-Forwarded-For client HTTP header to the getIp function.

API Platform Core is a system to create hypermedia-driven REST and GraphQL APIs. Using the Relay special node type you can bypass the configured security on an operation. This vulnerability is fixed in 4.0.22 and 3.4.17.

XWiki Platform is a generic wiki platform. Prior to 15.10.14, 16.4.6, and 16.10.0-rc-1, it's possible for an user to get access to private information through the REST API - but could also be through another API - when a sub wiki is using "Prevent unregistered users to view pages". The vulnerability only affects subwikis, and it only concerns specific right options such as "Prevent unregistered users to view pages". or "Prevent unregistered users to edit pages". It's possible to detect the vulnerability by enabling "Prevent unregistered users to view pages" and then trying to access a page through the REST API without using any credentials. The vulnerability has been patched in XWiki 15.10.14, 16.4.6 and 16.10.0RC1.

ecjia-daojia 1.38.1-20210202629 is vulnerable to information leakage via content/apps/installer/classes/Helper.php. When the web program is installed, a new environment file is created, and the database information is recorded, including the database record password. NOTE: the vendor disputes this because the environment file is in the data directory, which is not intended for access by website visitors (only the statics directory can be accessed by website visitors)

A security misconfiguration exists in Combodo iTop, which can expose sensitive information.

An issue was discovered in Znuny through 7.1.3. If access to a ticket is not given, the content of S/MIME encrypted e-mail messages is visible to users with access to the CommunicationLog.

The Download Manager WordPress plugin before 3.2.83 does not protect file download's passwords, leaking it upon receiving an invalid one.

This issue was addressed with improved data access restriction. This issue is fixed in visionOS 2.4, iOS 18.4 and iPadOS 18.4, iPadOS 17.7.6. Sensitive keychain data may be accessible from an iOS backup.

The netsnmp_udp_fmtaddr function (snmplib/snmpUDPDomain.c) in net-snmp 5.0.9 through 5.4.2.1, when using TCP wrappers for client authorization, does not properly parse hosts.allow rules, which allows remote attackers to bypass intended access restrictions and execute SNMP queries, related to "source/destination IP address confusion."

The /rest/issueNav/1/issueTable resource in Jira before version 8.3.2 allows remote attackers to enumerate usernames via an incorrect authorisation check.

The imgcrypt library provides API exensions for containerd to support encrypted container images and implements the ctd-decoder command line tool for use by containerd to decrypt encrypted container images. The imgcrypt function `CheckAuthorization` is supposed to check whether the current used is authorized to access an encrypted image and prevent the user from running an image that another user previously decrypted on the same system. In versions prior to 1.1.4, a failure occurs when an image with a ManifestList is used and the architecture of the local host is not the first one in the ManifestList. Only the first architecture in the list was tested, which may not have its layers available locally since it could not be run on the host architecture. Therefore, the verdict on unavailable layers was that the image could be run anticipating that image run failure would occur later due to the layers not being available. However, this verdict to allow the image to run enabled other architectures in the ManifestList to run an image without providing keys if that image had previously been decrypted. A patch has been applied to imgcrypt 1.1.4. Workarounds may include usage of different namespaces for each remote user.

An improper access control issue in GitLab EE affecting all versions from 12.0 prior to 15.0.5, 15.1 prior to 15.1.4, and 15.2 prior to 15.2.1 allows an attacker to bypass IP allow-listing and download artifacts. This attack only bypasses IP allow-listing, proper permissions are still required.

The ACL plugin in Dovecot before 1.1.4 treats negative access rights as if they are positive access rights, which allows attackers to bypass intended access restrictions.

Alpine is a scaffolding library in Java. Alpine prior to version 1.10.4 allows URL access filter bypass. This issue has been fixed in version 1.10.4. There are no known workarounds.

BigBlueButton is an open source web conferencing system. Versions prior to 2.4-rc-6 are vulnerable to Insertion of Sensitive Information Into Sent Data. The moderators-only webcams lock setting is not enforced on the backend, which allows an attacker to subscribe to viewers' webcams, even when the lock setting is applied. (The required streamId was being sent to all users even with lock setting applied). This issue is fixed in version 2.4-rc-6. There are no workarounds.

An information leak was discovered in MediaWiki before 1.31.10 and 1.32.x through 1.34.x before 1.34.4. Handling of actor ID does not necessarily use the correct database or correct wiki.

Jenkins 2.274 and earlier, LTS 2.263.1 and earlier does not correctly match requested URLs to the list of always accessible paths, allowing attackers without Overall/Read permission to access some URLs as if they did have Overall/Read permission.

Emmanuel MyDomoAtHome (MDAH) REST API REST API Domoticz ISS Gateway 0.2.40 is affected by an information disclosure vulnerability due to improper access control enforcement. An unauthenticated remote attacker can exploit this, via a specially crafted request to gain access to sensitive information.

It was possible for some users without permission to view other users' full names to do so via the online users block in moodle before 3.10.2, 3.9.5, 3.8.8, 3.5.17.

IBM QRadar User Behavior Analytics 1.0.0 through 4.1.0 could disclose sensitive information due an overly permissive cross-domain policy. IBM X-Force ID: 196334.

index.php in dirLIST before 0.1.1 allows remote attackers to list the contents of an excluded folder via a modified URL containing the folder name.

A vulnerability in the Private Internet Access (PIA) VPN Client for Linux 1.5 through 2.3+ allows remote attackers to bypass an intended VPN kill switch mechanism and read sensitive information via intercepting network traffic. Since 1.5, PIA has supported a “split tunnel” OpenVPN bypass option. The PIA killswitch & associated iptables firewall is designed to protect you while using the Internet. When the kill switch is configured to block all inbound and outbound network traffic, privileged applications can continue sending & receiving network traffic if net.ipv4.ip_forward has been enabled in the system kernel parameters. For example, a Docker container running on a host with the VPN turned off, and the kill switch turned on, can continue using the internet, leaking the host IP (CWE 200). In PIA 2.4.0+, policy-based routing is enabled by default and is used to direct all forwarded packets to the VPN interface automatically.

October is a free, open-source, self-hosted CMS platform based on the Laravel PHP Framework. In October CMS from version 1.0.421 and before version 1.0.469, an attacker can read local files on an October CMS server via a specially crafted request. Issue has been patched in Build 469 (v1.0.469) and v1.1.0.

The WPS Hide Login plugin for WordPress is vulnerable to login page disclosure even when the settings of the plugin are set to hide the login page making it possible for unauthenticated attackers to brute force credentials on sites in versions up to, and including, 1.5.4.2.

Affected versions of Atlassian Jira Server and Data Center allow an unauthenticated user to enumerate users via an Information Disclosure vulnerability in the QueryComponentRendererValue!Default.jspa endpoint. The affected versions are before version 8.5.13, from version 8.6.0 before 8.13.5, and from version 8.14.0 before 8.15.1.

Incorrect access control in NexusPHP 1.5.beta5.20120707 allows unauthorized attackers to access published content.

Vulnerability in the Oracle Agile PLM Framework product of Oracle Supply Chain (component: Install). The supported version that is affected is 9.3.6. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Agile PLM Framework. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Agile PLM Framework accessible data. CVSS 3.1 Base Score 7.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N).

Certain Shenzhen PENGLIXIN components on DEPSTECH WiFi Digital Microscope 3, as used by Shekar Endoscope, allow a TELNET connection with the molinkadmin password for the molink account.

Veritas APTARE versions prior to 10.4 allowed remote users to access several unintended files on the server. This vulnerability only impacts Windows server deployments.

Improper authorization in global search in GitLab EE affecting all versions from 16.11 prior to 16.11.5 and 17.0 prior to 17.0.3 and 17.1 prior to 17.1.1 allows an attacker leak content of a private repository in a public project.

Improper Access Control vulnerability in the /Exago/WrImageResource.adx route as used in Device42 Asset Management Appliance allows an unauthenticated attacker to read sensitive server files with root permissions. This issue affects: Device42 CMDB versions prior to 18.01.00.

The Salon booking system Free and Pro WordPress plugins before 7.6.3 do not have proper authorisation in some of its endpoints, which could allow customers to access all bookings and other customer's data

Several worklog rest resources in Jira before version 7.13.7, and from version 8.0.0 before version 8.3.2 allow remote attackers to view worklog time information via a missing permissions check.

A CWE-863: Incorrect Authorization vulnerability exists in U.motion Server (MEG6501-0001 - U.motion KNX server, MEG6501-0002 - U.motion KNX Server Plus, MEG6260-0410 - U.motion KNX Server Plus, Touch 10, MEG6260-0415 - U.motion KNX Server Plus, Touch 15), which could allow the file system to access the wrong file.

An access control issue in WebBoss.io CMS v3.7.0.1 allows attackers to access the Website Backup Tool via a crafted GET request.

Mattermost fails to delete card attachments in Boards, allowing an attacker to access deleted attachments.

The SDK for the MediaPlaybackController module has improper permission verification. Successful exploitation of this vulnerability may affect confidentiality.

The python_food ordering system V1.0 has an unauthorized vulnerability that leads to the leakage of sensitive user information. Attackers can access it through https://ip:port/api/myapp/index/user/info?id=1 And modify the ID value to obtain sensitive user information beyond authorization.

Discourse is a platform for community discussion. In affected versions any private message that includes a group had its title and participating user exposed to users that do not have access to the private messages. However, access control for the private messages was not compromised as users were not able to view the posts in the leaked private message despite seeing it in their inbox. The problematic commit was reverted around 32 minutes after it was made. Users are encouraged to upgrade to the latest commit if they are running Discourse against the `tests-passed` branch.

An issue in Hideez com.hideez 2.7.8.3 allows a remote attacker to obtain sensitive information via the firmware update process.