Multiple heap-based buffer overflows in the hiddev_ioctl_usage function in drivers/hid/usbhid/hiddev.c in the Linux kernel through 4.6.3 allow local users to cause a denial of service or possibly have unspecified other impact via a crafted (1) HIDIOCGUSAGES or (2) HIDIOCSUSAGES ioctl call.

A flaw was found in the Nosy driver in the Linux kernel. This issue allows a device to be inserted twice into a doubly-linked list, leading to a use-after-free when one of these devices is removed. The highest threat from this vulnerability is to confidentiality, integrity, as well as system availability. Versions before kernel 5.12-rc6 are affected

The XSLoader::load method in XSLoader in Perl does not properly locate .so files when called in a string eval, which might allow local users to execute arbitrary code via a Trojan horse library under the current working directory.

The start_thread function in arch/powerpc/kernel/process.c in the Linux kernel through 4.6.3 on powerpc platforms mishandles transactional state, which allows local users to cause a denial of service (invalid process state or TM Bad Thing exception, and system crash) or possibly have unspecified other impact by starting and suspending a transaction before an exec system call.

NTFS-3G versions < 2021.8.22, a stack buffer overflow can occur when correcting differences in the MFT and MFTMirror allowing for code execution or escalation of privileges when setuid-root.

The compat IPT_SO_SET_REPLACE and IP6T_SO_SET_REPLACE setsockopt implementations in the netfilter subsystem in the Linux kernel before 4.6.3 allow local users to gain privileges or cause a denial of service (memory corruption) by leveraging in-container root access to provide a crafted offset value that triggers an unintended decrement.

An issue was discovered in the Linux kernel through 6.0.10. l2cap_config_req in net/bluetooth/l2cap_core.c has an integer wraparound via L2CAP_CONF_REQ packets.

In NTFS-3G versions < 2021.8.22, when specially crafted NTFS attributes are read in the function ntfs_attr_pread_i, a heap buffer overflow can occur and allow for writing to arbitrary memory or denial of service of the application.

Heap-based buffer overflow in the iscsi_aio_ioctl function in block/iscsi.c in QEMU allows local guest OS users to cause a denial of service (QEMU process crash) or possibly execute arbitrary code via a crafted iSCSI asynchronous I/O ioctl call.

Sudo before 1.9.17p1 allows local users to obtain root access because /etc/nsswitch.conf from a user-controlled directory is used with the --chroot option.

The InfiniBand (aka IB) stack in the Linux kernel before 4.5.3 incorrectly relies on the write system call, which allows local users to cause a denial of service (kernel memory write operation) or possibly have unspecified other impact via a uAPI interface.

The (1) esp_reg_read and (2) esp_reg_write functions in hw/scsi/esp.c in QEMU allow local guest OS administrators to cause a denial of service (QEMU process crash) or execute arbitrary code on the QEMU host via vectors related to the information transfer buffer.

fontconfig before 2.12.1 does not validate offsets, which allows local users to trigger arbitrary free calls and consequently conduct double free attacks and execute arbitrary code via a crafted cache file.

NTFS-3G versions < 2021.8.22, when a specially crafted NTFS attribute from the MFT is setup in the function ntfs_attr_setup_flag, a heap buffer overflow can occur allowing for code execution and escalation of privileges.

The mm subsystem in the Linux kernel through 3.2 does not properly enforce the CONFIG_STRICT_DEVMEM protection mechanism, which allows local users to read or write to kernel memory locations in the first megabyte (and bypass slab-allocation access restrictions) via an application that opens the /dev/mem file, related to arch/x86/mm/init.c and drivers/char/mem.c.

(1) cpan/Archive-Tar/bin/ptar, (2) cpan/Archive-Tar/bin/ptardiff, (3) cpan/Archive-Tar/bin/ptargrep, (4) cpan/CPAN/scripts/cpan, (5) cpan/Digest-SHA/shasum, (6) cpan/Encode/bin/enc2xs, (7) cpan/Encode/bin/encguess, (8) cpan/Encode/bin/piconv, (9) cpan/Encode/bin/ucmlint, (10) cpan/Encode/bin/unidump, (11) cpan/ExtUtils-MakeMaker/bin/instmodsh, (12) cpan/IO-Compress/bin/zipdetails, (13) cpan/JSON-PP/bin/json_pp, (14) cpan/Test-Harness/bin/prove, (15) dist/ExtUtils-ParseXS/lib/ExtUtils/xsubpp, (16) dist/Module-CoreList/corelist, (17) ext/Pod-Html/bin/pod2html, (18) utils/c2ph.PL, (19) utils/h2ph.PL, (20) utils/h2xs.PL, (21) utils/libnetcfg.PL, (22) utils/perlbug.PL, (23) utils/perldoc.PL, (24) utils/perlivp.PL, and (25) utils/splain.PL in Perl 5.x before 5.22.3-RC2 and 5.24 before 5.24.1-RC2 do not properly remove . (period) characters from the end of the includes directory array, which might allow local users to gain privileges via a Trojan horse module under the current working directory.

v86d before 0.1.10 do not verify if received netlink messages are sent by the kernel. This could allow unprivileged users to manipulate the video mode and potentially other consequences.

It was found that polkit could be tricked into bypassing the credential checks for D-Bus requests, elevating the privileges of the requestor to the root user. This flaw could be used by an unprivileged local attacker to, for example, create a new local administrator. The highest threat from this vulnerability is to data confidentiality and integrity as well as system availability.

The SQLDriverConnect() function in unixODBC before 2.2.14p2 have a possible buffer overflow condition when specifying a large value for SAVEFILE parameter in the connection string.

In the Linux kernel before version 4.12, Kerberos 5 tickets decoded when using the RXRPC keys incorrectly assumes the size of a field. This could lead to the size-remaining variable wrapping and the data pointer going over the end of the buffer. This could possibly lead to memory corruption and possible privilege escalation.

The Linux kernel before 5.1-rc5 allows page->_refcount reference count overflow, with resultant use-after-free issues, if about 140 GiB of RAM exists. This is related to fs/fuse/dev.c, fs/pipe.c, fs/splice.c, include/linux/mm.h, include/linux/pipe_fs_i.h, kernel/trace/trace.c, mm/gup.c, and mm/hugetlb.c. It can occur with FUSE requests.

The ecryptfs_privileged_open function in fs/ecryptfs/kthread.c in the Linux kernel before 4.6.3 allows local users to gain privileges or cause a denial of service (stack memory consumption) via vectors involving crafted mmap calls for /proc pathnames, leading to recursive pagefault handling.

In the Linux kernel before 5.1.17, ptrace_link in kernel/ptrace.c mishandles the recording of the credentials of a process that wants to create a ptrace relationship, which allows local users to obtain root access by leveraging certain scenarios with a parent-child process relationship, where a parent drops privileges and calls execve (potentially allowing control by an attacker). One contributing factor is an object lifetime issue (which can also cause a panic). Another contributing factor is incorrect marking of a ptrace relationship as privileged, which is exploitable through (for example) Polkit's pkexec helper with PTRACE_TRACEME. NOTE: SELinux deny_ptrace might be a usable workaround in some environments.

qemu-bridge-helper.c in QEMU 3.1 and 4.0.0 does not ensure that a network interface name (obtained from bridge.conf or a --br=bridge option) is limited to the IFNAMSIZ size, which can lead to an ACL bypass.

fs/seq_file.c in the Linux kernel 3.16 through 5.13.x before 5.13.4 does not properly restrict seq buffer allocations, leading to an integer overflow, an Out-of-bounds Write, and escalation to root by an unprivileged user, aka CID-8cae8cd89f05.

An out-of-bounds memory access flaw was found in the Linux kernel’s XFS file system in how a user restores an XFS image after failure (with a dirty log journal). This flaw allows a local user to crash or potentially escalate their privileges on the system.

A flaw was found in xorg-x11-server in versions before 21.1.2 and before 1.20.14. An out-of-bounds access can occur in the SProcXFixesCreatePointerBarrier function. The highest threat from this vulnerability is to data confidentiality and integrity as well as system availability.

In the Linux kernel, the following vulnerability has been resolved: net: gtp: Fix Use-After-Free in gtp_dellink Since call_rcu, which is called in the hlist_for_each_entry_rcu traversal of gtp_dellink, is not part of the RCU read critical section, it is possible that the RCU grace period will pass during the traversal and the key will be free. To prevent this, it should be changed to hlist_for_each_entry_safe.

An issue was discovered in the Linux kernel before 6.0.11. Missing validation of the number of channels in drivers/net/wireless/microchip/wilc1000/cfg80211.c in the WILC1000 wireless driver can trigger a heap-based buffer overflow when copying the list of operating channels from Wi-Fi management frames.

Various refcounting bugs in the multi-BSS handling in the mac80211 stack in the Linux kernel 5.1 through 5.19.x before 5.19.16 could be used by local attackers (able to inject WLAN frames) to trigger use-after-free conditions to potentially execute code.

NGINX Open Source before versions 1.23.2 and 1.22.1, NGINX Open Source Subscription before versions R2 P1 and R1 P1, and NGINX Plus before versions R27 P1 and R26 P1 have a vulnerability in the module ngx_http_mp4_module that might allow a local attacker to corrupt NGINX worker memory, resulting in its termination or potential other impact using a specially crafted audio or video file. The issue affects only NGINX products that are built with the ngx_http_mp4_module, when the mp4 directive is used in the configuration file. Further, the attack is possible only if an attacker can trigger processing of a specially crafted audio or video file with the module ngx_http_mp4_module.

systemd-tmpfiles in systemd before 237 attempts to support ownership/permission changes on hardlinked files even if the fs.protected_hardlinks sysctl is turned off, which allows local users to bypass intended access restrictions via vectors involving a hard link to a file for which the user lacks write access, as demonstrated by changing the ownership of the /etc/passwd file.

In the Linux kernel before 5.12.4, net/bluetooth/hci_event.c has a use-after-free when destroying an hci_chan, aka CID-5c4c8c954409. This leads to writing an arbitrary value.

x86 shadow plus log-dirty mode use-after-free In environments where host assisted address translation is necessary but Hardware Assisted Paging (HAP) is unavailable, Xen will run guests in so called shadow mode. Shadow mode maintains a pool of memory used for both shadow page tables as well as auxiliary data structures. To migrate or snapshot guests, Xen additionally runs them in so called log-dirty mode. The data structures needed by the log-dirty tracking are part of aformentioned auxiliary data. In order to keep error handling efforts within reasonable bounds, for operations which may require memory allocations shadow mode logic ensures up front that enough memory is available for the worst case requirements. Unfortunately, while page table memory is properly accounted for on the code path requiring the potential establishing of new shadows, demands by the log-dirty infrastructure were not taken into consideration. As a result, just established shadow page tables could be freed again immediately, while other code is still accessing them on the assumption that they would remain allocated.

A vulnerability was found in X.Org. This security flaw occurs because the XkbCopyNames function left a dangling pointer to freed memory, resulting in out-of-bounds memory access on subsequent XkbGetKbdByName requests.. This issue can lead to local privileges elevation on systems where the X server is running privileged and remote code execution for ssh X forwarding sessions.

The join_session_keyring function in security/keys/process_keys.c in the Linux kernel before 4.4.1 mishandles object references in a certain error case, which allows local users to gain privileges or cause a denial of service (integer overflow and use-after-free) via crafted keyctl commands.

x86 shadow paging arbitrary pointer dereference In environments where host assisted address translation is necessary but Hardware Assisted Paging (HAP) is unavailable, Xen will run guests in so called shadow mode. Due to too lax a check in one of the hypervisor routines used for shadow page handling it is possible for a guest with a PCI device passed through to cause the hypervisor to access an arbitrary pointer partially under guest control.

In the Linux kernel, the following vulnerability has been resolved: net/rds: fix WARNING in rds_conn_connect_if_down If connection isn't established yet, get_mr() will fail, trigger connection after get_mr().

In the Linux kernel, the following vulnerability has been resolved: ext4: fix double-free of blocks due to wrong extents moved_len In ext4_move_extents(), moved_len is only updated when all moves are successfully executed, and only discards orig_inode and donor_inode preallocations when moved_len is not zero. When the loop fails to exit after successfully moving some extents, moved_len is not updated and remains at 0, so it does not discard the preallocations. If the moved extents overlap with the preallocated extents, the overlapped extents are freed twice in ext4_mb_release_inode_pa() and ext4_process_freed_data() (as described in commit 94d7c16cbbbd ("ext4: Fix double-free of blocks with EXT4_IOC_MOVE_EXT")), and bb_free is incremented twice. Hence when trim is executed, a zero-division bug is triggered in mb_update_avg_fragment_size() because bb_free is not zero and bb_fragments is zero. Therefore, update move_len after each extent move to avoid the issue.

In the Linux kernel, the following vulnerability has been resolved: ceph: prevent use-after-free in encode_cap_msg() In fs/ceph/caps.c, in encode_cap_msg(), "use after free" error was caught by KASAN at this line - 'ceph_buffer_get(arg->xattr_buf);'. This implies before the refcount could be increment here, it was freed. In same file, in "handle_cap_grant()" refcount is decremented by this line - 'ceph_buffer_put(ci->i_xattrs.blob);'. It appears that a race occurred and resource was freed by the latter line before the former line could increment it. encode_cap_msg() is called by __send_cap() and __send_cap() is called by ceph_check_caps() after calling __prep_cap(). __prep_cap() is where arg->xattr_buf is assigned to ci->i_xattrs.blob. This is the spot where the refcount must be increased to prevent "use after free" error.

A flaw was found in libcaca v0.99.beta19. A buffer overflow issue in caca_resize function in libcaca/caca/canvas.c may lead to local execution of arbitrary code in the user context.

The bpf verifier in the Linux kernel did not properly handle mod32 destination register truncation when the source register was known to be 0. A local attacker with the ability to load bpf programs could use this gain out-of-bounds reads in kernel memory leading to information disclosure (kernel memory), and possibly out-of-bounds writes that could potentially lead to code execution. This issue was addressed in the upstream kernel in commit 9b00f1b78809 ("bpf: Fix truncation handling for mod32 dst reg wrt zero") and in Linux stable kernels 5.11.2, 5.10.19, and 5.4.101.

A buffer overflow was discovered in NTFS-3G before 2022.10.3. Crafted metadata in an NTFS image can cause code execution. A local attacker can exploit this if the ntfs-3g binary is setuid root. A physically proximate attacker can exploit this if NTFS-3G software is configured to execute upon attachment of an external storage device.

In NTFS-3G versions < 2021.8.22, when a specially crafted MFT section is supplied in an NTFS image a heap buffer overflow can occur and allow for code execution.

An issue was discovered in the Linux kernel through 5.10.11. PI futexes have a kernel stack use-after-free during fault handling, allowing local users to execute code in the kernel, aka CID-34b1a1ce1458.

In NTFS-3G versions < 2021.8.22, when a specially crafted unicode string is supplied in an NTFS image a heap buffer overflow can occur and allow for code execution.

Terminology 0.7.0 allows remote attackers to execute arbitrary commands via escape sequences that modify the window title and then are written to the terminal, a similar issue to CVE-2003-0063.

In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: prevent use-after-free on vif when cleaning up all interfaces wilc_netdev_cleanup currently triggers a KASAN warning, which can be observed on interface registration error path, or simply by removing the module/unbinding device from driver: echo spi0.1 > /sys/bus/spi/drivers/wilc1000_spi/unbind ================================================================== BUG: KASAN: slab-use-after-free in wilc_netdev_cleanup+0x508/0x5cc Read of size 4 at addr c54d1ce8 by task sh/86 CPU: 0 PID: 86 Comm: sh Not tainted 6.8.0-rc1+ #117 Hardware name: Atmel SAMA5 unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x34/0x58 dump_stack_lvl from print_report+0x154/0x500 print_report from kasan_report+0xac/0xd8 kasan_report from wilc_netdev_cleanup+0x508/0x5cc wilc_netdev_cleanup from wilc_bus_remove+0xc8/0xec wilc_bus_remove from spi_remove+0x8c/0xac spi_remove from device_release_driver_internal+0x434/0x5f8 device_release_driver_internal from unbind_store+0xbc/0x108 unbind_store from kernfs_fop_write_iter+0x398/0x584 kernfs_fop_write_iter from vfs_write+0x728/0xf88 vfs_write from ksys_write+0x110/0x1e4 ksys_write from ret_fast_syscall+0x0/0x1c [...] Allocated by task 1: kasan_save_track+0x30/0x5c __kasan_kmalloc+0x8c/0x94 __kmalloc_node+0x1cc/0x3e4 kvmalloc_node+0x48/0x180 alloc_netdev_mqs+0x68/0x11dc alloc_etherdev_mqs+0x28/0x34 wilc_netdev_ifc_init+0x34/0x8ec wilc_cfg80211_init+0x690/0x910 wilc_bus_probe+0xe0/0x4a0 spi_probe+0x158/0x1b0 really_probe+0x270/0xdf4 __driver_probe_device+0x1dc/0x580 driver_probe_device+0x60/0x140 __driver_attach+0x228/0x5d4 bus_for_each_dev+0x13c/0x1a8 bus_add_driver+0x2a0/0x608 driver_register+0x24c/0x578 do_one_initcall+0x180/0x310 kernel_init_freeable+0x424/0x484 kernel_init+0x20/0x148 ret_from_fork+0x14/0x28 Freed by task 86: kasan_save_track+0x30/0x5c kasan_save_free_info+0x38/0x58 __kasan_slab_free+0xe4/0x140 kfree+0xb0/0x238 device_release+0xc0/0x2a8 kobject_put+0x1d4/0x46c netdev_run_todo+0x8fc/0x11d0 wilc_netdev_cleanup+0x1e4/0x5cc wilc_bus_remove+0xc8/0xec spi_remove+0x8c/0xac device_release_driver_internal+0x434/0x5f8 unbind_store+0xbc/0x108 kernfs_fop_write_iter+0x398/0x584 vfs_write+0x728/0xf88 ksys_write+0x110/0x1e4 ret_fast_syscall+0x0/0x1c [...] David Mosberger-Tan initial investigation [1] showed that this use-after-free is due to netdevice unregistration during vif list traversal. When unregistering a net device, since the needs_free_netdev has been set to true during registration, the netdevice object is also freed, and as a consequence, the corresponding vif object too, since it is attached to it as private netdevice data. The next occurrence of the loop then tries to access freed vif pointer to the list to move forward in the list. Fix this use-after-free thanks to two mechanisms: - navigate in the list with list_for_each_entry_safe, which allows to safely modify the list as we go through each element. For each element, remove it from the list with list_del_rcu - make sure to wait for RCU grace period end after each vif removal to make sure it is safe to free the corresponding vif too (through unregister_netdev) Since we are in a RCU "modifier" path (not a "reader" path), and because such path is expected not to be concurrent to any other modifier (we are using the vif_mutex lock), we do not need to use RCU list API, that's why we can benefit from list_for_each_entry_safe. [1] https://lore.kernel.org/linux-wireless/ab077dbe58b1ea5de0a3b2ca21f275a07af967d2.camel@egauge.net/

Sudo before 1.9.5p2 contains an off-by-one error that can result in a heap-based buffer overflow, which allows privilege escalation to root via "sudoedit -s" and a command-line argument that ends with a single backslash character.