An issue has recently been discovered in Arista EOS where the incorrect use of EOS's AAA API’s by the OpenConfig and TerminAttr agents could result in unrestricted access to the device for local users with nopassword configuration.
An issue has recently been discovered in Arista EOS where the incorrect use of EOS's AAA API’s by the OpenConfig and TerminAttr agents could result in unrestricted access to the device for local users with nopassword configuration.
Missing Authentication for Critical Function vulnerability in Mitsubishi Electric Corporation MELSEC-F Series CPU modules, MELSEC iQ-F Series, MELSEC iQ-R series CPU modules, MELSEC iQ-R series, MELSEC iQ-L series, MELSEC Q series, MELSEC-L series, Mitsubishi Electric CNC M800V/M80V series, Mitsubishi Electric CNC M800/M80/E80 series and Mitsubishi Electric CNC M700V/M70V/E70 series allows a remote unauthenticated attacker to execute arbitrary commands by sending specific packets to the affected products. This could lead to disclose or tamper with information by reading or writing control programs, or cause a denial-of-service (DoS) condition on the products by resetting the memory contents of the products to factory settings or resetting the products remotely.
The uListing plugin for WordPress is vulnerable to authorization bypass due to missing capability checks, and a missing security nonce, on the UlistingUserRole::save_role_api function in versions up to, and including, 1.6.6. This makes it possible for unauthenticated attackers to arbitrarily delete site posts and pages.
WP DSGVO Tools (GDPR) <= 3.1.23 had an AJAX action, ‘admin-dismiss-unsubscribe‘, which lacked a capability check and a nonce check and was available to unauthenticated users, and did not check the post type when deleting unsubscription requests. As such, it was possible for an attacker to permanently delete an arbitrary post or page on the site by sending an AJAX request with the “action” parameter set to “admin-dismiss-unsubscribe” and the “id” parameter set to the post to be deleted. Sending such a request would move the post to the trash, and repeating the request would permanently delete the post in question.
TadTools special page is vulnerable to authorization bypass, thus remote attackers can use the specific parameter to delete arbitrary files in the system without logging in.
An exploitable denial-of-service vulnerability exists in the iocheckd service "I/O-Check" functionality of WAGO PFC 200 Firmware versions 03.01.07(13) and 03.00.39(12), and WAGO PFC100 Firmware version 03.00.39(12). A single packet can cause a denial of service and weaken credentials resulting in the default documented credentials being applied to the device. An attacker can send an unauthenticated packet to trigger this vulnerability.
An exploitable denial-of-service vulnerability exists in the iocheckd service ‘’I/O-Chec’’ functionality of WAGO PFC 200 Firmware versions 03.01.07(13) and 03.00.39(12), and WAGO PFC 100 Firmware version 03.00.39(12). A specially crafted set of packets can cause a denial of service, resulting in the device entering an error state where it ceases all network communications. An attacker can send unauthenticated packets to trigger this vulnerability.
An unauthenticated remote attacker may use a missing authentication for critical function vulnerability to reboot or erase the affected devices resulting in data loss and/or a DoS.
The iSTAR door controllers running firmware prior to version 6.6.B, does not support authenticated communications with ICU, which may allow an attacker to gain unauthorized access
DedeCMS V5.7.114 is vulnerable to deletion of any file via mail_file_manage.php.
Missing Authorization vulnerability in Repute Infosystems ARMember.This issue affects ARMember: from n/a through 4.0.28.
Missing Authorization vulnerability in UkrSolution Barcode Scanner with Inventory & Order Manager.This issue affects Barcode Scanner with Inventory & Order Manager: from n/a through 1.5.3.
Cloud Manager versions prior to 3.9.4 are susceptible to a vulnerability that could allow a remote attacker to overwrite arbitrary system files.
A vulnerability was found in Bdtask Hospital AutoManager up to 20240227 and classified as problematic. This issue affects some unknown processing of the file /prescription/prescription/delete/ of the component Prescription Page. The manipulation leads to improper authorization. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-256271. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
A CWE-306: Missing Authentication for Critical Function vulnerability exists that could cause deletion of arbitrary files in the context of the user running IGSS due to lack of validation of network messages. Affected Product: Interactive Graphical SCADA System Data Collector (dc.exe) (V15.0.0.21320 and prior)
The WordPress GDPR plugin for WordPress is vulnerable to unauthorized loss of data due to a missing capability check on the 'WordPress_GDPR_Data_Delete::check_action' function in all versions up to, and including, 2.0.2. This makes it possible for unauthenticated attackers to delete arbitrary users.
The WordPress plugin, WP Database Reset through 3.1, contains a flaw that allowed any unauthenticated user to reset any table in the database to the initial WordPress set-up state (deleting all site content stored in that table), as demonstrated by a wp-admin/admin-post.php?db-reset-tables[]=comments URI.
The 10Web Booster WordPress plugin before 2.24.18 does not validate the option name given to some AJAX actions, allowing unauthenticated users to delete arbitrary options from the database, leading to denial of service.
A vulnerability in the web management interface of Cisco Small Business 220 Series Smart Switches could allow an unauthenticated, remote attacker to upload arbitrary files. The vulnerability is due to incomplete authorization checks in the web management interface. An attacker could exploit this vulnerability by sending a malicious request to certain parts of the web management interface. Depending on the configuration of the affected switch, the malicious request must be sent via HTTP or HTTPS. A successful exploit could allow the attacker to modify the configuration of an affected device or to inject a reverse shell. This vulnerability affects Cisco Small Business 220 Series Smart Switches running firmware versions prior to 1.1.4.4 with the web management interface enabled. The web management interface is enabled via both HTTP and HTTPS by default.
From Eclipse OpenJ9 0.15 to 0.16, access to diagnostic operations such as causing a GC or creating a diagnostic file are permitted without any privilege checks.
An issue was discovered in the Boomerang Parental Control application through 13.83 for Android. The child can use Safe Mode to remove all restrictions temporarily or uninstall the application without the parents noticing.
AMI BMC contains a vulnerability in the IPMI handler, where an unauthenticated host is allowed to write to a host SPI flash, bypassing secure boot protections. An exploitation of this vulnerability may lead to a loss of integrity or denial of service.
BaiCloud-cms v2.5.7 is affected by an arbitrary file deletion vulnerability, which allows an attacker to delete arbitrary files on the server through /user/ppsave.php.
onekeyadmin v1.3.9 was discovered to contain an arbitrary file delete vulnerability via the component \admin\controller\plugins.
Missing Authorization vulnerability in Najeeb Ahmad Simple User Registration allows Accessing Functionality Not Properly Constrained by ACLs.This issue affects Simple User Registration: from n/a through 5.5.
An exploitable denial of service vulnerability exists in the iocheckd service "I/O-Check" functionality of WAGO PFC200 Firmware versions 03.01.07(13) and 03.00.39(12), and WAGO PFC100 Firmware version 03.00.39(12). A specially crafted set of packets can cause a denial of service, resulting in the device entering an error state where it ceases all network communications. An attacker can send unauthenticated packets to trigger this vulnerability.
LS ELECTRIC XBC-DN32U with operating system version 01.80 is missing authentication to create users on the PLC. This could allow an attacker to create and use an account with elevated privileges and take control of the device.
themegrill-demo-importer before 1.6.2 does not require authentication for wiping the database, because of a reset_wizard_actions hook.
LS ELECTRIC XBC-DN32U with operating system version 01.80 is missing authentication for its deletion command. This could allow an attacker to delete arbitrary files.
Pimcore's Admin Classic Bundle provides a backend user interface for Pimcore. Prior to version 1.3.3, an attacker can create, delete etc. tags without having the permission to do so. A fix is available in version 1.3.3. As a workaround, one may apply the patch manually.
Missing Authorization vulnerability in JS Help Desk JS Help Desk – Best Help Desk & Support Plugin allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects JS Help Desk – Best Help Desk & Support Plugin: from n/a through 2.7.1.
Missing Authorization vulnerability in ThemeHunk Zita Site Builder allows Accessing Functionality Not Properly Constrained by ACLs.This issue affects Zita Site Builder: from n/a through 1.0.2.
An improper authorization vulnerability [CWE-285] in Fortinet FortiNAC version 9.4.0 through 9.4.1 and before 9.2.6 allows an unauthenticated user to perform some administrative operations over the FortiNAC instance via crafted HTTP POST requests.
An issue in the component /cgi-bin/upload_firmware.cgi of D-Link DIR-823G REVA1 1.02B05 allows attackers to cause a denial of service (DoS) via unspecified vectors.
HashiCorp Vault Enterprise 1.7.0 through 1.9.7, 1.10.4, and 1.11.0 clusters using Integrated Storage expose an unauthenticated API endpoint that could be abused to override the voter status of a node within a Vault HA cluster, introducing potential for future data loss or catastrophic failure. Fixed in Vault Enterprise 1.9.8, 1.10.5, and 1.11.1.
The specific APIs of Parking Management System from ZONG YU has a Missing Authentication vulnerability, allowing unauthenticated remote attackers to access specific APIs and operate system functions. These functions include opening gates and restarting the system.
It was discovered that the /configuration view of redhat-certification 7 does not perform an authorization check and it allows an unauthenticated user to remove a "system" file, that is an xml file with host related information, not belonging to him.
File Deletion vulnerability in Halo 0.4.3 via delBackup.
JTEKT TOYOPUC PLCs through 2022-04-29 mishandle authentication. They utilize the CMPLink/TCP protocol (configurable on ports 1024-65534 on either TCP or UDP) for a wide variety of engineering purposes such as starting and stopping the PLC, downloading and uploading projects, and changing configuration settings. This protocol does not have any authentication features, allowing any attacker capable of communicating with the port in question to invoke (a subset of) desired functionality.
Bently Nevada condition monitoring equipment through 2022-04-29 mishandles authentication. It utilizes the TDI command and data protocols (60005/TCP, 60007/TCP) for communications between the monitoring controller and System 1 and/or Bently Nevada Monitor Configuration (BNMC) software. These protocols provide configuration management and historical data related functionality. Neither protocol has any authentication features, allowing any attacker capable of communicating with the ports in question to invoke (a subset of) desired functionality.
Missing Authorization vulnerability in Drupal Open Social allows Forceful Browsing.This issue affects Open Social: from 0.0.0 before 12.3.11, from 12.4.0 before 12.4.10.
Improper Authentication vulnerability in WAGO 750-8XX series with FW version <= FW03 allows an attacker to change the settings of the devices by sending specifically constructed requests without authentication This issue affects: WAGO 750-362, WAGO 750-363, WAGO 750-823, WAGO 750-832/xxx-xxx, WAGO 750-862, WAGO 750-891, WAGO 750-890/xxx-xxx in versions FW03 and prior versions.
Improper Authentication vulnerability in WAGO 750-8XX series with FW version <= FW07 allows an attacker to change some special parameters without authentication. This issue affects: WAGO 750-852, WAGO 750-880/xxx-xxx, WAGO 750-881, WAGO 750-831/xxx-xxx, WAGO 750-882, WAGO 750-885/xxx-xxx, WAGO 750-889 in versions FW07 and below.
Honeywell Experion LX through 2022-05-06 has Missing Authentication for a Critical Function. According to FSCT-2022-0055, there is a Honeywell Experion LX Control Data Access (CDA) EpicMo protocol with unauthenticated functionality issue. The affected components are characterized as: Honeywell Control Data Access (CDA) EpicMo (55565/TCP). The potential impact is: Firmware manipulation, Denial of service. The Honeywell Experion LX Distributed Control System (DCS) utilizes the Control Data Access (CDA) EpicMo protocol (55565/TCP) for device diagnostics and maintenance purposes. This protocol does not have any authentication features, allowing any attacker capable of communicating with the ports in question to invoke (a subset of) desired functionality. There is no authentication functionality on the protocol in question. An attacker capable of invoking the protocols' functionalities could issue firmware download commands potentially allowing for firmware manipulation and reboot devices causing denial of service.
Opto 22 SoftPAC Project Version 9.6 and prior. SoftPACAgent communicates with SoftPACMonitor over network Port 22000. However, this port is open without any restrictions. This allows an attacker with network access to control the SoftPACAgent service including updating SoftPAC firmware, starting or stopping service, or writing to certain registry values.
A CWE-306 "Missing Authentication for Critical Function" in maxprofile/setup/routes.lua in Q-Free MaxTime less than or equal to version 2.11.0 allows an unauthenticated remote attacker to factory reset the device via crafted HTTP requests.
A remote unprivileged attacker can interact with the configuration interface of a Flexi-Compact FLX3-CPUC1 or FLX3-CPUC2 running an affected firmware version to potentially impact the availability of the FlexiCompact.
An access control issue in Zammad v5.0.3 allows attackers to write entries to the CTI caller log without authentication. This vulnerability can allow attackers to execute phishing attacks or cause a Denial of Service (DoS).
Power Line Communications PLC4TRUCKS J2497 trailer brake controllers implement diagnostic functions which can be invoked by replaying J2497 messages. There is no authentication or authorization for these functions.