D-Link DIR-823G A1V1.0.2B05 was discovered to contain a buffer overflow via the EndTime parameter in the SetParentsControlInfo function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

D-Link DIR-816 A2 1.10 B05 was discovered to contain multiple command injection vulnerabilities via the admuser and admpass parameters at /goform/setSysAdm.

D-Link DIR-619L 2.06B01 is vulnerable to Buffer Overflow in the formSysCmd function via the submit-url parameter.

A vulnerability was found in D-Link DCS-932L 2.18.01. It has been declared as critical. Affected by this vulnerability is the function setSystemEmail of the file /setSystemEmail. The manipulation of the argument EmailSMTPPortNumber leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

D-Link DIR-619L 2.06B01 is vulnerable to Buffer Overflow in the formLanguageChange function via the nextPage parameter.

A vulnerability classified as critical was found in D-Link DI-7003GV2 24.04.18D1 R(68125). This vulnerability affects the function sub_4983B0 of the file /H5/backup.asp?opt=reset of the component Factory Reset Handler. The manipulation leads to denial of service. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

D-LINK DIR-815 v1.01 was discovered to contain a buffer overflow via the component /web/captcha.cgi.

A Broken Access Control vulnerability in the D-Link DSL-2680 web administration interface (Firmware EU_1.03) allows an attacker to reboot the router by submitting a reboot.html GET request without being authenticated on the admin interface.

D-Link DIR-619 Ax v1.00 was discovered to contain a stack overflow in the function formdumpeasysetup. This vulnerability allows attackers to cause a Denial of Service (DoS) via the config.save_network_enabled parameter.

D-Link DSL-3788 revA1 1.01R1B036_EU_EN is vulnerable to Buffer Overflow via the COMM_MAKECustomMsg function of the webproc cgi

D-Link DIR-619 Ax v1.00 was discovered to contain a stack overflow in the function formSetWanL2TP. This vulnerability allows attackers to cause a Denial of Service (DoS) via the curTime parameter.

D-Link DIR-619 Ax v1.00 was discovered to contain a stack overflow in the function formSetWanPPPoE. This vulnerability allows attackers to cause a Denial of Service (DoS) via the curTime parameter.

D-Link DI-8100 v16.07.26A1 has a stack overflow vulnerability in the dbsrv_asp function.

An HTTP smuggling attack in the web application of D-Link DIR-X1860 before v1.10WWB09_Beta allows a remote unauthenticated attacker to DoS the web application via sending a specific HTTP packet.

A denial-of-service attack in WPA2, and WPA3-SAE authentication methods in D-Link DIR-X1560, v1.04B04, and DIR-X6060, v1.11B04 allows a remote unauthenticated attacker to disconnect a wireless client via sending specific spoofed SAE authentication frames.

D-Link Wireless AC1200 Dual Band VDSL ADSL Modem Router DSL-3782 Firmware v1.01 allows unauthenticated attackers to cause a Denial of Service (DoS) via the User parameter or Pwd parameter to Login.asp.

D-link DIR-816 A2_v1.10CNB04, DIR-878 DIR_878_FW1.30B08.img is vulnerable to Buffer Overflow via /goform/addRouting.

A NULL pointer dereference in the plugins_call_handle_uri_clean function of D-Link DAP-1520 REVA_FIRMWARE_1.10B04_BETA02_HOTFIX allows attackers to cause a Denial of Service (DoS) via a crafted HTTP request without authentication.

A NULL pointer dereference in D-Link DIR-860L REVB_FIRMWARE_2.04.B04_ic5b allows attackers to cause a Denial of Service (DoS) via a crafted HTTP request.

D-Link DIR-823G A1V1.0.2B05 was discovered to contain a Null-pointer dereferences in sub_41C488(). This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

A vulnerability, which was classified as problematic, was found in D-Link DIR-823X 240126/240802. This affects the function set_wifi_blacklists of the file /goform/set_wifi_blacklists of the component HTTP POST Request Handler. The manipulation of the argument macList leads to null pointer dereference. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A NULL Pointer Dereference discovered in DumpTS v0.1.0-nightly allows attackers to cause a denial of service via the function DumpOneStream() at /src/DumpStream.cpp.

Helm is a tool for managing Charts, pre-configured Kubernetes resources. Versions prior to 3.10.3 are subject to NULL Pointer Dereference in the _repo_package. The _repo_ package contains a handler that processes the index file of a repository. For example, the Helm client adds references to chart repositories where charts are managed. The _repo_ package parses the index file of the repository and loads it into structures Go can work with. Some index files can cause array data structures to be created causing a memory violation. Applications that use the _repo_ package in the Helm SDK to parse an index file can suffer a Denial of Service when that input causes a panic that cannot be recovered from. The Helm Client will panic with an index file that causes a memory violation panic. Helm is not a long running service so the panic will not affect future uses of the Helm client. This issue has been patched in 3.10.3. SDK users can validate index files that are correctly formatted before passing them to the _repo_ functions.

The br_mdb_ip_get function in net/bridge/br_multicast.c in the Linux kernel before 2.6.35-rc5 allows remote attackers to cause a denial of service (NULL pointer dereference and system crash) via an IGMP packet, related to lack of a multicast table.

The counterToCSSValue function in CSSComputedStyleDeclaration.cpp in the Cascading Style Sheets (CSS) implementation in WebCore in WebKit before r82222, as used in Google Chrome before 11.0.696.43 and other products, does not properly handle access to the (1) counterIncrement and (2) counterReset attributes of CSSStyleDeclaration data provided by a getComputedStyle method call, which allows remote attackers to cause a denial of service (NULL pointer dereference and application crash) via crafted JavaScript code.

A null pointer dereference in Fortinet FortiOS version 7.2.0 through 7.2.4, 7.0.0 through 7.0.11, 6.4.0 through 6.4.12, 6.2.0 through 6.2.14, 6.0.0 through 6.0.16, FortiProxy 7.2.0 through 7.2.3, 7.0.0 through 7.0.10, 2.0.0 through 2.0.12, 1.2.0 through 1.2.13, 1.1.0 through 1.1.6, 1.0.0 through 1.0.7 allows attacker to denial of service via specially crafted HTTP requests.

A vulnerability was found in openldap. This security flaw causes a null pointer dereference in ber_memalloc_x() function.

An issue was discovered in GnuTLS before 3.6.15. A server can trigger a NULL pointer dereference in a TLS 1.3 client if a no_renegotiation alert is sent with unexpected timing, and then an invalid second handshake occurs. The crash happens in the application's error handling path, where the gnutls_deinit function is called after detecting a handshake failure.

Null pointer dereference vulnerability exists in multiple vendors MFPs and printers which implement Debut web server 1.2 or 1.3. Processing a specially crafted request may lead an affected product to a denial-of-service (DoS) condition. As for the affected products/models/versions, see the detailed information provided by each vendor.

A NULL pointer dereference in vercot Serva v4.6.0 allows attackers to cause a Denial of Service (DoS) via a crafted HTTP request.

In the Linux kernel, the following vulnerability has been resolved: cppc_cpufreq: Fix possible null pointer dereference cppc_cpufreq_get_rate() and hisi_cppc_cpufreq_get_rate() can be called from different places with various parameters. So cpufreq_cpu_get() can return null as 'policy' in some circumstances. Fix this bug by adding null return check. Found by Linux Verification Center (linuxtesting.org) with SVACE.

Windows Remote Desktop Licensing Service Denial of Service Vulnerability

Windows Networking Denial of Service Vulnerability

An issue was discovered in Bento4 version 06c39d9. A NULL pointer dereference exists in the AP4_DescriptorListWriter::Action component located in /Core/Ap4Descriptor.h. It allows an attacker to cause a denial of service (DOS).

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. A memory allocation failure due to `http.memcap` being reached leads to a NULL-ptr reference leading to a crash. Upgrade to 7.0.6.

Windows Networking Denial of Service Vulnerability

null pointer dereference in mod_proxy in Apache HTTP Server 2.4.59 and earlier allows an attacker to crash the server via a malicious request. Users are recommended to upgrade to version 2.4.60, which fixes this issue.

ws is an open source WebSocket client and server for Node.js. A request with a number of headers exceeding theserver.maxHeadersCount threshold could be used to crash a ws server. The vulnerability was fixed in ws@8.17.1 (e55e510) and backported to ws@7.5.10 (22c2876), ws@6.2.3 (eeb76d3), and ws@5.2.4 (4abd8f6). In vulnerable versions of ws, the issue can be mitigated in the following ways: 1. Reduce the maximum allowed length of the request headers using the --max-http-header-size=size and/or the maxHeaderSize options so that no more headers than the server.maxHeadersCount limit can be sent. 2. Set server.maxHeadersCount to 0 so that no limit is applied.

Windows Layer-2 Bridge Network Driver Denial of Service Vulnerability

A NULL pointer dereference flaw was found in the way LibVNCServer before 0.9.9 handled certain ClientCutText message. A remote attacker could use this flaw to crash the VNC server by sending a specially crafted ClientCutText message from a VNC client.

Nokogiri is an open source XML and HTML library for the Ruby programming language. Nokogiri `1.13.8` and `1.13.9` fail to check the return value from `xmlTextReaderExpand` in the method `Nokogiri::XML::Reader#attribute_hash`. This can lead to a null pointer exception when invalid markup is being parsed. For applications using `XML::Reader` to parse untrusted inputs, this may potentially be a vector for a denial of service attack. Users are advised to upgrade to Nokogiri `>= 1.13.10`. Users may be able to search their code for calls to either `XML::Reader#attributes` or `XML::Reader#attribute_hash` to determine if they are affected.

In Splunk Enterprise versions below 9.2.2, 9.1.5, and 9.0.10 and Splunk Cloud Platform versions below 9.1.2312.109 and 9.1.2308.207, an attacker could trigger a null pointer reference on the cluster/config REST endpoint, which could result in a crash of the Splunk daemon.

browser/worker_host/message_port_dispatcher.cc in Google Chrome before 8.0.552.224 and Chrome OS before 8.0.552.343 does not properly handle certain postMessage calls, which allows remote attackers to cause a denial of service (NULL pointer dereference and application crash) via crafted JavaScript code that creates a web worker.

A NULL pointer dereference in WLAvalancheService in Ivanti Avalanche 6.3.1 allows a remote unauthenticated attacker to crash the service, resulting in a DoS.

In NanoMQ v0.15.0-0, segment fault with Null Pointer Dereference occurs in the process of decoding subinfo_decode and unsubinfo_decode.

On BIG-IP version 16.1.x before 16.1.2, when the 'Respond on Error' setting is enabled on the Request Logging profile and configured on a virtual server, undisclosed requests can cause the Traffic Management Microkernel (TMM) to terminate. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

NULL Pointer Dereference allows attackers to cause a denial of service (or application crash). This only applies when lxml is used together with libxml2 2.9.10 through 2.9.14. libxml2 2.9.9 and earlier are not affected. It allows triggering crashes through forged input data, given a vulnerable code sequence in the application. The vulnerability is caused by the iterwalk function (also used by the canonicalize function). Such code shouldn't be in wide-spread use, given that parsing + iterwalk would usually be replaced with the more efficient iterparse function. However, an XML converter that serialises to C14N would also be vulnerable, for example, and there are legitimate use cases for this code sequence. If untrusted input is received (also remotely) and processed via iterwalk function, a crash can be triggered.