A weakness has been identified in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. Affected by this vulnerability is the function FMT_restart/Status_HDInfo/SMART_List/ScanDisk_info/ScanDisk/volume_status/Get_Volume_Mapping/FMT_check_disk_remount_state/FMT_rebuildinfo/FMT_result_list/FMT_result_list_phy/FMT_get_dminfo/FMT_manually_rebuild_info/Get_current_raidtype of the file /cgi-bin/dsk_mgr.cgi. Executing a manipulation can lead to improper access controls. It is possible to launch the attack remotely. The exploit has been made available to the public and could be used for attacks.

Stack buffer overflow vulnerability in D-Link DIR-513 v1.10 via the curTime parameter to goform/formSetDomainFilter.

A vulnerability, which was classified as critical, was found in D-Link DAP-1562 1.10. This affects the function pure_auth_check of the component HTTP POST Request Handler. The manipulation of the argument a1 leads to null pointer dereference. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

D-Link DIR-880 A1_FW107WWb08 was discovered to contain a NULL pointer dereference in the function FUN_00010824.

A vulnerability was found in D-Link DI-8400 16.07.26A1. It has been classified as problematic. This affects an unknown part of the file usb_paswd.asp of the component jhttpd. The manipulation of the argument share_enable leads to null pointer dereference. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as problematic, was found in D-Link DIR-823X 240126/240802. This affects the function set_wifi_blacklists of the file /goform/set_wifi_blacklists of the component HTTP POST Request Handler. The manipulation of the argument macList leads to null pointer dereference. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability has been found in D-Link DIR-823X 240126/240802 and classified as critical. Affected by this vulnerability is the function FUN_00412244. The manipulation leads to null pointer dereference. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A NULL pointer dereference in the SetWLanRadioSettings function of D-Link DIR-823G A1 v1.0.2B05 allows attackers to cause a Denial of Service (DoS) via a crafted HTTP request.

A NULL pointer dereference in D-Link DIR-860L REVB_FIRMWARE_2.04.B04_ic5b allows attackers to cause a Denial of Service (DoS) via a crafted HTTP request.

D-Link DIR-823G A1V1.0.2B05 was discovered to contain a Null-pointer dereferences in sub_41C488(). This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

Null Pointer Dereference vulnerability exists in D-Link DAP-2310 2.07.RC031, DAP-2330 1.07.RC028, DAP-2360 2.07.RC043, DAP-2553 3.06.RC027, DAP-2660 1.13.RC074, DAP-2690 3.16.RC100, DAP-2695 1.17.RC063, DAP-3320 1.01.RC014 and DAP-3662 1.01.RC022 in the upload_config function of sbin/httpd binary. When the binary handle the specific HTTP GET request, the content in upload_file variable is NULL in the upload_config function then the strncasecmp would take NULL as first argument, and incur the NULL pointer dereference vulnerability.

Null Pointer Dereference vulnerability exists in D-Link DSP-W215 1.10, which could let a remote malicious user cause a denial of servie via usr/bin/lighttpd. It could be triggered by sending an HTTP request without URL in the start line directly to the device. NOTE: The DSP-W215 and all hardware revisions is considered End of Life and as such this issue will not be patched

Null Pointer Dereference vulnerability in D-Link DIR-825 2.10b02, which could let a remote malicious user cause a denial of service. The vulnerability could be triggered by sending an HTTP request with URL /vct_wan; the sbin/httpd would invoke the strchr function and take NULL as a first argument, which finally leads to the segmentation fault. NOTE: The DIR-825 and all hardware revisions is considered End of Life and as such this issue will not be patched

Null pointer dereference vulnerability in D-Link DAP-2310 2,10RC039, DAP-2330 1.10RC036 BETA, DAP-2360 2.10RC055, DAP-2553 3.10rc039 BETA, DAP-2660 1.15rc131b, DAP-2690 3.20RC115 BETA, DAP-2695 1.20RC093, DAP-3320 1.05RC027 BETA and DAP-3662 1.05rc069 in the sbin/httpd binary. The crash happens at the `atoi' operation when a specific network package are sent to the httpd binary.

Null Pointer Dereference vulnerability exists in D-Link DSL-2740R UK_1.01, which could let a remove malicious user cause a denial of service via the send_hnap_unauthorized function. It could be triggered by sending crafted POST request to /HNAP1/. NOTE: The DSL-2740R and all hardware revisions are considered End of Life and as such this issue will not be patched

Null Pointer Dereference vulnerability exists in D-Link DAP-2310 2.07.RC031, DAP-2330 1.07.RC028, DAP-2360 2.07.RC043, DAP-2553 3.06.RC027, DAP-2660 1.13.RC074, DAP-2690 3.16.RC100, DAP-2695 1.17.RC063, DAP-3320 1.01.RC014 and DAP-3662 1.01.RC022 in the upload_certificate function of sbin/httpd binary. When the binary handle the specific HTTP GET request, the strrchr in the upload_certificate function would take NULL as first argument, and incur the NULL pointer dereference vulnerability.

Time4J Base v5.9.3 was discovered to contain a NullPointerException via the component net.time4j.format.internal.FormatUtils::useDefaultWeekmodel(Locale). NOTE: this is disputed by multiple third parties who believe there was not reasonable evidence to determine the existence of a vulnerability. The submission may have been based on a tool that is not sufficiently robust for vulnerability identification.

The swctrl service is used to detect and remotely manage PLANET Technology devices. Certain switch models have a Denial-of-Service vulnerability in the swctrl service, allowing unauthenticated remote attackers to send crafted packets that can crash the service.

A null pointer dereference issue was discovered in 'FFmpeg' in decode_main_header() function of libavformat/nutdec.c file. The flaw occurs because the function lacks check of the return value of avformat_new_stream() and triggers the null pointer dereference error, causing an application to crash.

Invalid pointer in the Audio/Video: Playback component. This vulnerability was fixed in Firefox 150 and Thunderbird 150.

An unauthenticated attacker can perform a null pointer dereference in the DHIP Service (UDP port 37810). This vulnerability has been resolved in firmware version 2.800.0000000.8.R.20241111.

A flaw was found in OpenEXR in versions before 3.0.0-beta. A crafted input file supplied by an attacker, that is processed by the Dwa decompression functionality of OpenEXR's IlmImf library, could cause a NULL pointer dereference. The highest threat from this vulnerability is to system availability.

SAP NetWeaver Application Server for ABAP and ABAP Platform allows an unauthenticated attacker to send a maliciously crafted http request which could cause a null pointer dereference in the kernel. This dereference will result in the system crashing and rebooting, causing the system to be temporarily unavailable. There is no impact on Confidentiality or Integrity.

An XML entity expansion or XEE vulnerability in SAML component of Ivanti Connect Secure (9.x, 22.x) and Ivanti Policy Secure allows an unauthenticated attacker to send specially crafted XML requests in-order-to temporarily cause resource exhaustion thereby resulting in a limited-time DoS.

A vulnerability in the DHCP version 4 (DHCPv4) server feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to trigger a crash of the dhcpd process, resulting in a denial of service (DoS) condition. This vulnerability exists because certain DHCPv4 messages are improperly validated when they are processed by an affected device. An attacker could exploit this vulnerability by sending a malformed DHCPv4 message to an affected device. A successful exploit could allow the attacker to cause a crash of the dhcpd process. While the dhcpd process is restarting, which may take approximately two minutes, DHCPv4 server services are unavailable on the affected device. This could temporarily prevent network access to clients that join the network during that time period and rely on the DHCPv4 server of the affected device. Notes: Only the dhcpd process crashes and eventually restarts automatically. The router does not reload. This vulnerability only applies to DHCPv4. DHCP version 6 (DHCPv6) is not affected.

There is a NULL pointer dereference vulnerability in some Huawei products. An attacker may send specially crafted POST messages to the affected products. Due to insufficient validation of some parameter in the message, successful exploit may cause some process abnormal. (Vulnerability ID: HWPSIRT-2017-10105) This vulnerability has been assigned a Common Vulnerabilities and Exposures (CVE) ID: CVE-2020-9085.

In modem-ps-nas-ngmm, there is a possible undefined behavior due to incorrect error handling. This could lead to remote information disclosure no additional execution privileges needed

High traffic environments may result in NULL Pointer Dereference vulnerability in Silicon Labs's Ember ZNet SDK before v7.4.0, causing a system crash.

An issue was discovered on Samsung mobile devices with M(6.0) software. The multiwindow_facade API allows attackers to cause a NullPointerException and system halt via an attempted screen touch of a non-existing display. The Samsung ID is SVE-2017-9383 (August 2017).

stb_vorbis is a single file MIT licensed library for processing ogg vorbis files. A crafted file may trigger memory allocation failure in `start_decoder`. In that case the function returns early, the `f->comment_list` is set to `NULL`, but `f->comment_list_length` is not reset. Later in `vorbis_deinit` it tries to dereference the `NULL` pointer. This issue may lead to denial of service.

stb_image is a single file MIT licensed library for processing images. If `stbi__load_gif_main` in `stbi_load_gif_from_memory` fails it returns a null pointer and may keep the `z` variable uninitialized. In case the caller also sets the flip vertically flag, it continues and calls `stbi__vertical_flip_slices` with the null pointer result value and the uninitialized `z` value. This may result in a program crash.

NULL Pointer Dereference vulnerability in tmate-io tmate.This issue affects tmate: before 2.4.0.

NULL pointer dereference vulnerability in ASR1903 in ASR Lapwing_Linux on Linux (ims_client modules) allows Pointer Manipulation. This vulnerability is associated with program files sip/utils/src/sipuri.c.

A flaw was found in libssh versions before 0.8.9 and before 0.9.4 in the way it handled AES-CTR (or DES ciphers if enabled) ciphers. The server or client could crash when the connection hasn't been fully initialized and the system tries to cleanup the ciphers when closing the connection. The biggest threat from this vulnerability is system availability.

A NULL pointer dereference in the mod_authn_socache in Apache HTTP Server 2.4.66 and earlier allows an unauthenticated remote user to crash a child process in a caching forward proxy configuration. Users are recommended to upgrade to version 2.4.67, which fixes this issue.

FreeRDP is a free implementation of the Remote Desktop Protocol (RDP), released under the Apache license. Affected versions of FreeRDP are subject to a Null Pointer Dereference leading a crash in the RemoteFX (rfx) handling. Inside the `rfx_process_message_tileset` function, the program allocates tiles using `rfx_allocate_tiles` for the number of numTiles. If the initialization process of tiles is not completed for various reasons, tiles will have a NULL pointer. Which may be accessed in further processing and would cause a program crash. This issue has been addressed in versions 2.11.0 and 3.0.0-beta3. Users are advised to upgrade. There are no known workarounds for this vulnerability.

Null Pointer Dereference in `coap_client_exchange_blockwise2` function in Keith Cullen FreeCoAP 1.0 allows remote attackers to cause a denial of service and potentially execute arbitrary code via a specially crafted CoAP packet that causes `coap_msg_get_payload(resp)` to return a null pointer, which is then dereferenced in a call to `memcpy`.

In Tensorflow before versions 1.15.4, 2.0.3, 2.1.2, 2.2.1 and 2.3.1, the `tf.raw_ops.Switch` operation takes as input a tensor and a boolean and outputs two tensors. Depending on the boolean value, one of the tensors is exactly the input tensor whereas the other one should be an empty tensor. However, the eager runtime traverses all tensors in the output. Since only one of the tensors is defined, the other one is `nullptr`, hence we are binding a reference to `nullptr`. This is undefined behavior and reported as an error if compiling with `-fsanitize=null`. In this case, this results in a segmentation fault The issue is patched in commit da8558533d925694483d2c136a9220d6d49d843c, and is released in TensorFlow versions 1.15.4, 2.0.3, 2.1.2, 2.2.1, or 2.3.1.

In Tensorflow before versions 2.2.1 and 2.3.1, if a user passes an invalid argument to `dlpack.to_dlpack` the expected validations will cause variables to bind to `nullptr` while setting a `status` variable to the error condition. However, this `status` argument is not properly checked. Hence, code following these methods will bind references to null pointers. This is undefined behavior and reported as an error if compiling with `-fsanitize=null`. The issue is patched in commit 22e07fb204386768e5bcbea563641ea11f96ceb8 and is released in TensorFlow versions 2.2.1, or 2.3.1.

ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2-15 and 6.9.13-40, the MSL interpreter crashes when processing a invalid `<map>` element that causes it to use an image after it has been freed. Versions 7.1.2-15 and 6.9.13-40 contain a patch.

ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2-15 and 6.9.13-40, a NULL pointer dereference in ClonePixelCacheRepository allows a remote attacker to crash any application linked against ImageMagick by supplying a crafted image file, resulting in denial of service. Versions 7.1.2-15 and 6.9.13-40 contain a patch.

ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2-15 and 6.9.13-40, in `ReadSFWImage()` (`coders/sfw.c`), when temporary file creation fails, `read_info` is destroyed before its `filename` member is accessed, causing a NULL pointer dereference and crash. Versions 7.1.2-15 and 6.9.13-40 contain a patch.

Rekor is a software supply chain transparency log. In versions 1.4.3 and below, the entry implementation can panic on attacker-controlled input when canonicalizing a proposed entry with an empty spec.message, causing nil Pointer Dereference. Function validate() returns nil (success) when message is empty, leaving sign1Msg uninitialized, and Canonicalize() later dereferences v.sign1Msg.Payload. A malformed proposed entry of the cose/v0.0.1 type can cause a panic on a thread within the Rekor process. The thread is recovered so the client receives a 500 error message and service still continues, so the availability impact of this is minimal. This issue has been fixed in version 1.5.0.

HarfBuzz is a text shaping engine. Prior to version 12.3.0, a null pointer dereference vulnerability exists in the SubtableUnicodesCache::create function located in src/hb-ot-cmap-table.hh. The function fails to check if hb_malloc returns NULL before using placement new to construct an object at the returned pointer address. When hb_malloc fails to allocate memory (which can occur in low-memory conditions or when using custom allocators that simulate allocation failures), it returns NULL. The code then attempts to call the constructor on this null pointer using placement new syntax, resulting in undefined behavior and a Segmentation Fault. This issue has been patched in version 12.3.0.

A flaw has been found in Free5GC SMF up to 4.1.0. Affected is the function HandlePfcpAssociationReleaseRequest of the file internal/pfcp/handler/handler.go of the component PFCP UDP Endpoint. Executing a manipulation can lead to null pointer dereference. The attack may be launched remotely. The exploit has been published and may be used. A patch should be applied to remediate this issue.

A vulnerability was determined in Free5GC up to 4.1.0. The impacted element is the function establishPfcpSession of the component SMF. Executing a manipulation can lead to null pointer dereference. The attack may be launched remotely. The exploit has been publicly disclosed and may be utilized. It is best practice to apply a patch to resolve this issue.

A security flaw has been discovered in Free5GC up to 4.1.0. This impacts the function identityTriggerType of the file pfcp_reports.go. The manipulation results in null pointer dereference. The attack can be executed remotely. The exploit has been released to the public and may be used for attacks. Applying a patch is advised to resolve this issue.

A vulnerability has been found in Free5GC pcf up to 1.4.1. This affects the function HandleCreateSmPolicyRequest of the file internal/sbi/processor/smpolicy.go. The manipulation leads to null pointer dereference. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used. The identifier of the patch is df535f5524314620715e842baf9723efbeb481a7. Applying a patch is the recommended action to fix this issue.

A vulnerability was found in GPAC up to 2.4. It has been rated as problematic. Affected by this issue is the function gf_dash_download_init_segment of the file src/media_tools/dash_client.c. The manipulation of the argument base_init_url leads to null pointer dereference. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The patch is identified as 153ea314b6b053db17164f8bc3c7e1e460938eaa. It is recommended to apply a patch to fix this issue.

Some Huawei smart phones have a null pointer dereference vulnerability. An attacker crafts specific packets and sends to the affected product to exploit this vulnerability. Successful exploitation may cause the affected phone to be abnormal.