Null Pointer Dereference vulnerability exists in D-Link DSP-W215 1.10, which could let a remote malicious user cause a denial of servie via usr/bin/lighttpd. It could be triggered by sending an HTTP request without URL in the start line directly to the device. NOTE: The DSP-W215 and all hardware revisions is considered End of Life and as such this issue will not be patched

Null Pointer Dereference vulnerability exists in D-Link DAP-2310 2.07.RC031, DAP-2330 1.07.RC028, DAP-2360 2.07.RC043, DAP-2553 3.06.RC027, DAP-2660 1.13.RC074, DAP-2690 3.16.RC100, DAP-2695 1.17.RC063, DAP-3320 1.01.RC014 and DAP-3662 1.01.RC022 in the upload_config function of sbin/httpd binary. When the binary handle the specific HTTP GET request, the content in upload_file variable is NULL in the upload_config function then the strncasecmp would take NULL as first argument, and incur the NULL pointer dereference vulnerability.

Null pointer dereference vulnerability in D-Link DAP-2310 2,10RC039, DAP-2330 1.10RC036 BETA, DAP-2360 2.10RC055, DAP-2553 3.10rc039 BETA, DAP-2660 1.15rc131b, DAP-2690 3.20RC115 BETA, DAP-2695 1.20RC093, DAP-3320 1.05RC027 BETA and DAP-3662 1.05rc069 in the sbin/httpd binary. The crash happens at the `atoi' operation when a specific network package are sent to the httpd binary.

Null Pointer Dereference vulnerability exists in D-Link DAP-2310 2.07.RC031, DAP-2330 1.07.RC028, DAP-2360 2.07.RC043, DAP-2553 3.06.RC027, DAP-2660 1.13.RC074, DAP-2690 3.16.RC100, DAP-2695 1.17.RC063, DAP-3320 1.01.RC014 and DAP-3662 1.01.RC022 in the upload_certificate function of sbin/httpd binary. When the binary handle the specific HTTP GET request, the strrchr in the upload_certificate function would take NULL as first argument, and incur the NULL pointer dereference vulnerability.

A vulnerability, which was classified as critical, was found in D-Link DAP-1562 1.10. This affects the function pure_auth_check of the component HTTP POST Request Handler. The manipulation of the argument a1 leads to null pointer dereference. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

D-Link DIR-880 A1_FW107WWb08 was discovered to contain a NULL pointer dereference in the function FUN_00010824.

Null Pointer Dereference vulnerability exists in D-Link DSL-2740R UK_1.01, which could let a remove malicious user cause a denial of service via the send_hnap_unauthorized function. It could be triggered by sending crafted POST request to /HNAP1/. NOTE: The DSL-2740R and all hardware revisions are considered End of Life and as such this issue will not be patched

D-Link DSL-3788 revA1 1.01R1B036_EU_EN is vulnerable to Buffer Overflow via the COMM_MAKECustomMsg function of the webproc cgi

D-Link DIR-619L B1 2.02 is vulnerable to Buffer Overflow via formSetWAN_Wizard55 function.

A denial-of-service attack in WPA2, and WPA3-SAE authentication methods in D-Link DIR-X1560, v1.04B04, and DIR-X6060, v1.11B04 allows a remote unauthenticated attacker to disconnect a wireless client via sending specific spoofed SAE authentication frames.

D-Link DI-8100 v16.07.26A1 has a stack overflow vulnerability in the dbsrv_asp function.

An issue was discovered on D-Link DIR-605L Model B before FW2.11betaB06_hbrf devices, related to the code that handles the authentication values for HNAP. An attacker can cause a denial of service (device crash) or possibly have unspecified other impact by sending a sufficiently long string in the password field of the HTTP Basic Authentication section of the HTTP request.

An HTTP smuggling attack in the web application of D-Link DIR-X1860 before v1.10WWB09_Beta allows a remote unauthenticated attacker to DoS the web application via sending a specific HTTP packet.

D-Link DWL-G700AP with firmware 2.00 and 2.01 allows remote attackers to cause a denial of service (CAMEO HTTP service crash) via a request composed of "GET" followed by a space and two newlines, possibly triggering the crash due to missing arguments.

D-Link DI-524 Wireless Router, DI-624 Wireless Router, and DI-784 allow remote attackers to cause a denial of service (device reboot) via a series of crafted fragmented UDP packets, possibly involving a missing fragment.

D-Link DIR-823G A1V1.0.2B05 was discovered to contain a buffer overflow via the CurrentPassword parameter in the CheckPasswdSettings function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

D-Link DIR-823G A1V1.0.2B05 was discovered to contain a buffer overflow via the MacAddress parameter in the SetWanSettings function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

D-Link DIR-823G A1V1.0.2B05 was discovered to contain a buffer overflow via the GuardInt parameter in the SetWLanRadioSettings function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

D-Link DIR-823G A1V1.0.2B05 was discovered to contain a buffer overflow via the Mac parameter in the SetParentsControlInfo function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

D-Link DIR-823G A1V1.0.2B05 was discovered to contain a buffer overflow via the TXPower parameter in the SetWLanRadioSettings function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

D-Link DIR-822+ v1.0.5 was discovered to contain a stack-based buffer overflow vulnerability in the SetNetworkTomographySettings module.

D-Link DIR-823G A1V1.0.2B05 was discovered to contain a buffer overflow via the Encryption parameter in the SetWLanRadioSecurity function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

D-Link DIR-823G A1V1.0.2B05 was discovered to contain a buffer overflow via the Password parameter in the SetWanSettings function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

Integer signedness error in D-Link AirPlus DI-614+ running firmware 2.30 and earlier allows remote attackers to cause a denial of service (IP lease depletion) via a DHCP request with the LEASETIME option set to -1, which makes the DHCP lease valid for thirteen or more years.

D-Link DIR-823G A1V1.0.2B05 was discovered to contain a buffer overflow via the SSID parameter in the SetWLanRadioSettings function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

D-Link DIR-823G A1V1.0.2B05 was discovered to contain a buffer overflow via the AdminPassword parameter in the SetDeviceSettings function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

D-Link DIR-850L REV. A (with firmware through FW114WWb07_h2ab_beta1) and REV. B (with firmware through FW208WWb02) devices allow remote attackers to cause a denial of service (daemon crash) via crafted LAN traffic.

D-Link DIR-619L B1 2.02 is vulnerable to Buffer Overflow via formSetWanPPTP function.

Buffer overflow in the Embedded HTTP server, as used in (1) D-Link DI-804 4.68, Dl-704 V2.56b6, and Dl-704 V2.56b5 and (2) Linksys Etherfast BEFW11S4 Wireless AP + Cable/DSL Router 1.37.2 through 1.42.7 and Linksys WAP11 1.3 and 1.4, allows remote attackers to cause a denial of service (crash) via a long header, as demonstrated using the Host header.

D-Link DI-704 Internet Gateway firmware earlier than V2.56b6 allows remote attackers to cause a denial of service (reboot) via malformed IP datagram fragments.

D-Link DIR-619L B1 2.02 is vulnerable to Buffer Overflow via formSetWanDhcpplus function.

D-Link DIR-619L B1 2.02 is vulnerable to Buffer Overflow via websGetVar function.

D-Link DIR-619L B1 2.02 is vulnerable to Buffer Overflow via formSetWanL2TP function.

D-Link DIR-619L B1 2.02 is vulnerable to Buffer Overflow via formSetWanNonLogin function.

D-Link DIR-619L B1 2.02 is vulnerable to Buffer Overflow via formSetWAN_Wizard7 function.

D-Link D-View shutdown_coreserver Missing Authentication Denial-of-Service Vulnerability. This vulnerability allows remote attackers to create a denial-of-service condition on affected installations of D-Link D-View. Authentication is not required to exploit this vulnerability. The specific flaw exists within the shutdown_coreserver action. The issue results from the lack of authentication prior to allowing access to functionality. An attacker can leverage this vulnerability to create a denial-of-service condition on the system. Was ZDI-CAN-19572.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability, which was classified as critical, has been found in D-Link DIR-600M C1 3.08. Affected by this issue is some unknown functionality of the component Telnet Service. The manipulation of the argument username leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-254576. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.

D-Link DIR-619L B1 2.02 is vulnerable to Buffer Overflow via formLanguageChange function.

A Broken Access Control vulnerability in the D-Link DSL-2680 web administration interface (Firmware EU_1.03) allows an attacker to reboot the router by submitting a reboot.html GET request without being authenticated on the admin interface.

A stack overflow vulnerability in D-Link DIR820LA1_FW106B02 allows attackers to cause a denial of service via the reserveDHCP_HostName_1.1.1.0 parameter to lan.asp.

A stack overflow vulnerability exists in pingV4Msg component in D-Link DIR820LA1_FW105B03, allows attackers to cause a denial of service via the nextPage parameter to ping.ccp.

D-Link DIR-619L 2.06B01 is vulnerable to Buffer Overflow in the formLanguageChange function via the nextPage parameter.

A vulnerability was found in D-Link DCS-932L 2.18.01. It has been declared as critical. Affected by this vulnerability is the function setSystemEmail of the file /setSystemEmail. The manipulation of the argument EmailSMTPPortNumber leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

D-Link DIR-619L 2.06B01 is vulnerable to Buffer Overflow in the formWlanSetup function via the parameter f_wds_wepKey.

D-Link DIR-619L 2.06B01 is vulnerable to Buffer Overflow in the formSysCmd function via the submit-url parameter.

D-Link DIR-845L router v1.01KRb03 and before is vulnerable to Command injection via the hnap_main()func.

D-Link DIR-823G A1V1.0.2B05 was discovered to contain a buffer overflow via the EndTime parameter in the SetParentsControlInfo function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

D-Link DIR-823G A1V1.0.2B05 was discovered to contain a buffer overflow via the Type parameter in the SetWLanRadioSettings function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

On D-Link DIR-819 Firmware Version 1.06 Hardware Version A1 devices, it is possible to trigger a Denial of Service via the sys_token parameter in a cgi-bin/webproc?getpage=html/index.html request.

D-Link devices DAP-2310 v2.10rc036 and earlier, DAP-2330 v1.06rc020 and earlier, DAP-2360 v2.10rc050 and earlier, DAP-2553 v3.10rc031 and earlier, DAP-2660 v1.15rc093 and earlier, DAP-2690 v3.20rc106 and earlier, DAP-2695 v1.20rc119_beta31 and earlier, DAP-3320 v1.05rc027 beta and earlier, DAP-3662 v1.05rc047 and earlier allows attackers to cause a Denial of Service (DoS) via uploading a crafted firmware after modifying the firmware header.