Check Point VPN-1 R55, R65, and other versions, when Port Address Translation (PAT) is used, allows remote attackers to discover intranet IP addresses via a packet with a small TTL, which triggers an ICMP_TIMXCEED_INTRANS (aka ICMP time exceeded in-transit) response containing an encapsulated IP packet with an intranet address, as demonstrated by a TCP packet to the firewall management server on port 18264.

Check Point VPN-1/FireWall-1 4.1 and earlier allows remote attackers to redirect FTP connections to other servers ("FTP Bounce") via invalid FTP commands that are processed improperly by FireWall-1, aka "FTP Connection Enforcement Bypass."

Check Point FireWall-1 4.0 and 4.1 before SP5 allows remote attackers to obtain the IP addresses of internal interfaces via certain SecuRemote requests to TCP ports 256 or 264, which leaks the IP addresses in a reply packet.

Firewall-1 3.0 and 4.0 leaks packets with private IP address information, which could allow remote attackers to determine the real IP address of the host that is making the connection.

The design of the Internet Key Exchange (IKE) protocol, when using Aggressive Mode for shared secret authentication, does not encrypt initiator or responder identities during negotiation, which may allow remote attackers to determine valid usernames by (1) monitoring responses before the password is supplied or (2) sniffing, as originally reported for FireWall-1 SecuRemote.

Nokia Firewall Appliances running IPSO 3.3 and VPN-1/FireWall-1 4.1 Service Pack 3, IPSO 3.4 and VPN-1/FireWall-1 4.1 Service Pack 4, and IPSO 3.4 or IPSO 3.4.1 and VPN-1/FireWall-1 4.1 Service Pack 5, when SYN Defender is configured in Active Gateway mode, does not properly rewrite the third packet of a TCP three-way handshake to use the NAT IP address, which allows remote attackers to gain sensitive information.

Check Point VPN-1 4.1SP4 using SecuRemote returns different error messages for valid and invalid users, with prompts that vary depending on the authentication method being used, which makes it easier for remote attackers to conduct brute force attacks.

The client authentication interface for Check Point Firewall-1 4.0 and earlier generates different error messages for invalid usernames versus invalid passwords, which allows remote attackers to identify valid usernames on the firewall.

Check Point Session Authentication Agent allows remote attackers to obtain sensitive information (user credentials) via unspecified vectors.

Directory traversal vulnerability in Check Point Firewall-1 R55W before HFA03 allows remote attackers to read arbitrary files via an encoded .. (dot dot) in the URL on TCP port 18264.

The default configuration of SecuRemote for Check Point Firewall-1 allows remote attackers to obtain sensitive configuration information for the protected network without authentication.

Due to improper error handling, a REST API resource could expose a server side error containing an internal WSO2 specific package name in the HTTP response.

In APache APISIX before 3.13.1, the jwt-auth plugin has a security issue that leaks the user's secret key because the error message returned from the dependency lua-resty-jwt contains sensitive information.

Hitachi Vantara Pentaho Data Integration & Analytics versions before 10.1.0.0 and 9.3.0.6, including 9.5.x and 8.3.x, display the version of Tomcat when a server error is encountered.

The response messages received from the eSOMS report generation using certain parameter queries with full file path can be abused for enumerating the local file system structure.

Cryptomator encrypts data being stored on cloud infrastructure. Prior to version 1.19.0, in non-debug mode Cryptomator might leak cleartext paths into the log file. This can reveal meta information about the files stored inside a vault at a time, where the actual vault is closed. Not every cleartext path is logged. Only if a filesystem request fails for some reason (e.g. damaged encrypted file, not existing file), a log message is created. This issue has been patched in version 1.19.0.

IBM UrbanCode Deploy (UCD) 7.1 through 7.1.2.14, 7.2 through 7.2.3.7, and 7.3 through 7.3.2.2 could allow a remote attacker to obtain sensitive information when a detailed technical error message is returned in the browser. This information could be used in further attacks against the system. IBM X-Force ID: 265510.

OpenSift is an AI study tool that sifts through large datasets using semantic search and generative AI. Prior to version 1.6.3-alpha, some endpoints returned raw exception strings to clients. Additionally, login token material was exposed in UI/rendered responses and token rotation output. This issue has been patched in version 1.6.3-alpha.

free5GC UDR is the user data repository (UDR) for free5GC, an an open-source project for 5th generation (5G) mobile core networks. In versions up to and including 1.4.1, the NEF component reliably leaks internal parsing error details (e.g., invalid character 'n' after top-level value) to remote clients, which can aid attackers in service fingerprinting. All deployments of free5GC using the Nnef_PfdManagement service may be affected. free5gc/udr pull request 56 contains a patch for the issue. There is no direct workaround at the application level. The recommendation is to apply the provided patch.

The Vrm 360 3D Model Viewer WordPress plugin through 1.2.1 exposes the full path of a file when putting in a non-existent file in a parameter of the shortcode.

HCL DRYiCE MyXalytics is impacted by an improper error handling vulnerability. The application returns detailed error messages that can provide an attacker with insight into the application, system, etc.

IBM Security Guardium Key Lifecycle Manager 4.3 could allow a remote attacker to obtain sensitive information when a detailed technical error message is returned in the browser. This information could be used in further attacks against the system. IBM X-Force ID: 271197.

Barco Control Room Management Suite web application, which is part of TransForm N before 3.14, is exposing a license file upload mechanism. By tweaking the license file name, the returned error message exposes internal directory path details.

IBM InfoSphere Information Server 11.7 could allow a remote attacker to obtain sensitive information when a detailed technical error message is returned in the browser. This information could be used in further attacks against the system. IBM X-Force ID: 266167.

IBM Cloud Pak System 2.3.3.0, 2.3.3.3, 2.3.3.3 iFix1, 2.3.3.4, 2.3.3.5, 2.3.3.6, 2.3.3.6 iFix1, 2.3.3.6 iFix2, 2.3.3.7, and 2.3.3.7 iFix1 could disclose sensitive information about the system that could aid in further attacks against the system.

IBM Cloud Pak System 2.3.3.0, 2.3.3.3, 2.3.3.3 iFix1, 2.3.3.4, 2.3.3.5, 2.3.3.6, 2.3.3.6 iFix1, 2.3.3.6 iFix2, 2.3.3.7, and 2.3.3.7 iFix1 could disclose sensitive information about the system that could aid in further attacks against the system.

IBM Cloud Pak System 2.3.3.6, 2.3.36 iFix1, 2.3.3.6 iFix2, 2.3.3.7, 2.3.3.7 iFix1, and 2.3.4.0 could disclose sensitive information about the system that could aid in further attacks against the system.

In affected versions of Octopus Server it is possible to reveal the existence of resources in a space that the user does not have access to due to verbose error messaging.

IBM Cloud Pak System does not set the secure attribute on authorization tokens or session cookies. Attackers may be able to get the cookie values by sending a http:// link to a user or by planting this link in a site the user goes to. The cookie will be sent to the insecure link and the attacker can then obtain the cookie value by snooping the traffic.

IBM Cloud Pak System displays sensitive information in user messages that could aid in further attacks against the system.

Due to the lack of validation, SAP BusinessObjects Business Intelligence Platform (Version Management System) - version 403, permits an unauthenticated user to read the code snippet through the UI, which leads to low impact on confidentiality and no impact on the application's availability or integrity.

An issue was discovered in SmartClient 12.0. If an unauthenticated attacker makes a POST request to /tools/developerConsoleOperations.jsp or /isomorphic/IDACall with malformed XML data in the _transaction parameter, the server replies with a verbose error showing where the application resides (the absolute path). NOTE: the documentation states "These tools are, by default, available to anyone ... so they should only be deployed into a trusted environment. Alternately, the tools can easily be restricted to administrators or end users by protecting the tools path with normal authentication and authorization mechanisms on the web server."

IBM Cloud Pak System is vulnerable to cross-site scripting. This vulnerability allows users to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session.

In Divante vue-storefront-api through 1.11.1 and storefront-api through 1.0-rc.1, as used in VueStorefront PWA, unexpected HTTP requests lead to an exception that discloses the error stack trace, with absolute file paths and Node.js module names.

IBM Security Verify Governance, Identity Manager 10.01 could allow a remote attacker to obtain sensitive information when a detailed technical error message is returned in the browser. This information could be used in further attacks against the system. IBM X-Force ID: 224915.

Generation of Error Message Containing Sensitive Information vulnerability in Hillstone Networks Hillstone Next Generation FireWall.This issue affects Hillstone Next Generation FireWall: from 5.5R8P1 before 5.5R8P23.

IBM Cognos Analytics 11.1.7, 11.2.0, and 11.2.1 could allow a remote attacker to obtain system information without authentication which could be used in reconnaissance to gather information that could be used for future attacks. IBM X-Force ID: 257703.

Generation of Error Message Containing Sensitive Information in GitHub repository nocodb/nocodb prior to 0.91.7+.

Xibo is a content management system (CMS). Starting in version 3.0.0 and prior to version 3.3.5, some API routes will print a stack trace when called with missing or invalid parameters revealing sensitive information about the locations of paths that the server is using. Users should upgrade to version 3.3.5, which fixes this issue. There are no known workarounds aside from upgrading.

IBM Security Verify Information Queue 10.0.4 and 10.0.5 could allow a remote attacker to obtain sensitive information that could aid in further attacks against the system. IBM X-force ID: 256014.

The Fancy Product Designer plugin for WordPress is vulnerable to Full Path Disclosure in all versions up to, and including, 6.4.8. This is due to improper error handling in the PDF upload functionality that exposes server filesystem paths and stack traces in error messages. This makes it possible for unauthenticated attackers to retrieve the full path of the web application, which can be used to aid other attacks. The information displayed is not useful on its own, and requires another vulnerability to be present for damage to an affected website.

e-Excellence U-Office Force generates an error message in webiste service. An unauthenticated remote attacker can obtain partial sensitive system information from error message by sending a crafted command.

Error Messages Wrapped In HTTP Header.This issue affects BLU-IC2: through 1.19.5; BLU-IC4: through 1.19.5.

An issue was discovered in Serenity Serene (and StartSharp) before 6.7.0. When a password reset request occurs, the server response leaks the existence of users. If one tries to reset a password of a non-existent user, an error message indicates that this user does not exist.

The OPC UA .NET Standard Reference Server before 1.4.371.86. places sensitive information into an error message that may be seen remotely.

Adobe Campaign Classic version 18.10.5-8984 and earlier versions have an Information Exposure Through an Error Message vulnerability. Successful exploitation could lead to Information Disclosure in the context of the current user.

Generation of Error Message Containing Sensitive Information in Packagist microweber/microweber prior to 1.2.11.

livehelperchat is vulnerable to Generation of Error Message Containing Sensitive Information

Generation of Error Message Containing Sensitive Information in Packagist snipe/snipe-it prior to 5.3.11.

An issue was discovered in Joomla! 3.0.0 through 3.10.6 & 4.0.0 through 4.1.0. Uploading a file name of an excess length causes the error. This error brings up the screen with the path of the source code of the web application.