CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability exists that could cause remote code execution when manipulating internal methods through Java RMI interface.

D-Link DIR-846W A1 FW100A43 was discovered to contain a remote command execution (RCE) vulnerability via the wl(0).(0)_ssid parameter. This vulnerability is exploited via a crafted POST request.

lpd daemon (in.lpd) in Solaris 8 and earlier allows remote attackers to execute arbitrary commands via a job request with a crafted control file that is not properly handled when lpd invokes a mail program. NOTE: this might be the same vulnerability as CVE-2000-1220.

The processCommandSetMac() function of libcommon.so in Petwant PF-103 firmware 4.22.2.42 and Petalk AI 3.2.2.30 allows remote attackers to execute arbitrary system commands as the root user.

D-Link DIR-846 devices with firmware 100A35 allow remote attackers to execute arbitrary OS commands as root by leveraging admin access and sending a /HNAP1/ request for SetMasterWLanSettings with shell metacharacters to /squashfs-root/www/HNAP1/control/SetMasterWLanSettings.php.

On D-Link DIR-859 A3-1.06 and DIR-850 A1.13 devices, /etc/services/DEVICE.TIME.php allows command injection via the $SERVER variable.

Unauthenticated remote code execution occurs in D-Link products such as DIR-655C, DIR-866L, DIR-652, and DHP-1565. The issue occurs when the attacker sends an arbitrary input to a "PingTest" device common gateway interface that could lead to common injection. An attacker who successfully triggers the command injection could achieve full system compromise. Later, it was independently found that these are also affected: DIR-855L, DAP-1533, DIR-862L, DIR-615, DIR-835, and DIR-825.

Metersphere v1.20.20-lts-79d354a6 is vulnerable to Remote Command Execution. The system command reverse-shell can be executed at the custom code snippet function of the metersphere system workbench

WFS-SR03 v1.0.3 was discovered to contain a command injection vulnerability via the pro_stor_canceltrans_handler_part_19 function.

A command injection vulnerability has been discovered in the bootstrap stage of Bitdefender BOX 2, versions 2.1.47.42 and 2.1.53.45. The API method `/api/download_image` unsafely handles the production firmware URL supplied by remote servers, leading to arbitrary execution of system commands. In order to exploit the condition, an unauthenticated attacker should impersonate a infrastructure server to trigger this vulnerability.

TOTOLINK X5000R V9.1.0u.6118_B20201102 and V9.1.0u.6369_B20230113 contain a command insertion vulnerability in setting/setTracerouteCfg. This vulnerability allows an attacker to execute arbitrary commands through the "command" parameter.

The processCommandUploadLog() function of libcommon.so in Petwant PF-103 firmware 4.22.2.42 and Petalk AI 3.2.2.30 allows remote attackers to execute arbitrary system commands as the root user.

processCommandSetUid() in libcommon.so in Petwant PF-103 firmware 4.22.2.42 and Petalk AI 3.2.2.30 allows remote attackers to execute arbitrary system commands as the root user.

The escapeshellarg function in ext/standard/exec.c in PHP before 5.4.42, 5.5.x before 5.5.26, and 5.6.x before 5.6.10 on Windows allows remote attackers to execute arbitrary OS commands via a crafted string to an application that accepts command-line arguments for a call to the PHP system function.

An issue was discovered in rConfig 3.9.2. An attacker can directly execute system commands by sending a GET request to ajaxServerSettingsChk.php because the rootUname parameter is passed to the exec function without filtering, which can lead to command execution.

GL.iNET MT3000 4.1.0 Release 2 is vulnerable to OS Command Injection via /usr/lib/oui-httpd/rpc/logread.

The login_mgr.cgi script in D-Link DNS-320 through 2.05.B10 is vulnerable to remote command injection.

An issue was discovered on Zyxel GS1900 devices with firmware before 2.50(AAHH.0)C0. Due to lack of input validation in the cmd_sys_traceroute_exec(), cmd_sys_arp_clear(), and cmd_sys_ping_exec() functions in the libclicmd.so library contained in the firmware, an attacker could leverage these functions to call system() and execute arbitrary commands on the switches. (Note that these functions are currently not called in this version of the firmware, however an attacker could use other vulnerabilities to finally use these vulnerabilities to gain code execution.)

The cpanel function in go_site.php in GoAutoDial GoAdmin CE before 3.3-1421902800 allows remote attackers to execute arbitrary commands via the $type portion of the PATH_INFO.

A flaw was found in WebSVN 2.3.2. Without prior authentication, if the 'allowDownload' option is enabled in config.php, an attacker can invoke the dl.php script and pass a well formed 'path' argument to execute arbitrary commands against the underlying operating system.

Command Injection vulnerability in OpenWB 1.6 and 1.7 allows remote attackers to run arbitrary commands via crafted GET request.

An issue was discovered on various devices via the Linkplay firmware. There is WAN remote code execution without user interaction. An attacker could retrieve the AWS key from the firmware and obtain full control over Linkplay's AWS estate, including S3 buckets containing device firmware. When combined with an OS command injection vulnerability within the XML Parsing logic of the firmware update process, an attacker would be able to gain code execution on any device that attempted to update. Note that by default all devices tested had automatic updates enabled.

Pydio (formerly AjaXplorer) before 6.0.7 allows remote attackers to execute arbitrary commands via unspecified vectors, aka "Pydio OS Command Injection Vulnerabilities."

TOTOLINK A7100RU V7.4cu.2313_B20191024 is vulnerable to Command Injection.

An issue was discovered in Microvirt MEmu all versions prior to 7.0.2. A guest Android operating system inside the MEmu emulator contains a /system/bin/systemd binary that is run with root privileges on startup (this is unrelated to Red Hat's systemd init program, and is a closed-source proprietary tool that seems to be developed by Microvirt). This program opens TCP port 21509, presumably to receive installation-related commands from the host OS. Because everything after the installer:uninstall command is concatenated directly into a system() call, it is possible to execute arbitrary commands by supplying shell metacharacters.

An issue was discovered on MicroDigital N-series cameras with firmware through 6400.0.8.5. An attacker can exploit OS Command Injection in the filename parameter for remote code execution as root. This occurs in the Mainproc executable file, which can be run from the HTTPD web server.

An issue was discovered on Zolo Halo devices via the Linkplay firmware. There is Zolo Halo LAN remote code execution. The Zolo Halo Bluetooth speaker had a GoAhead web server listening on the port 80. The /httpapi.asp endpoint of the GoAhead web server was also vulnerable to multiple command execution vulnerabilities.

OS command injection affects Altenergy Power Control Software C1.2.5 via shell metacharacters in the index.php/management/set_timezone timezone parameter, because of set_timezone in models/management_model.php.

Freewill iFIS (aka SMART Trade) 20.01.01.04 allows OS Command Injection via shell metacharacters to a report page.

An issue was discovered on Mitsubishi Electric Europe B.V. ME-RTU devices through 2.02 and INEA ME-RTU devices through 3.0. An unauthenticated remote OS Command Injection vulnerability allows an attacker to execute arbitrary commands on the RTU due to the passing of unsafe user supplied data to the RTU's system shell. Functionality in mobile.php provides users with the ability to ping sites or IP addresses via Mobile Connection Test. When the Mobile Connection Test is submitted, action.php is called to execute the test. An attacker can use a shell command separator (;) in the host variable to execute operating system commands upon submitting the test data.

D-Link DIR-846W A1 FW100A43 was discovered to contain a remote command execution (RCE) vulnerability via the lan(0)_dhcps_staticlist parameter. This vulnerability is exploited via a crafted POST request.

The CGI subsystem on Cisco TelePresence Recording Server devices with software 1.6.x before 1.6.2 allows remote attackers to execute arbitrary commands via a request to TCP port 443, related to a "command injection vulnerability," aka Bug ID CSCtf97221.

The CGI implementation on Cisco TelePresence endpoint devices with software 1.2.x through 1.5.x allows remote attackers to execute arbitrary commands via a malformed request, related to "command injection vulnerabilities," aka Bug ID CSCtb31640.

phf CGI program allows remote command execution through shell metacharacters.

Command execution via shell metachars in INN daemon (innd) 1.5 using "newgroup" and "rmgroup" control messages, and others.

TP-Link M7350 devices through 1.0.16 Build 181220 Rel.1116n allow externalPort OS Command Injection (issue 1 of 5).

TP-Link M7350 devices through 1.0.16 Build 181220 Rel.1116n allow triggerPort OS Command Injection (issue 5 of 5).

A Remote Code Execution (RCE) vulnerability in the WebUI component of the eQ-3 HomeMatic CCU2 firmware up to and including version 2.57.5 and CCU3 firmware up to and including version 3.57.5 allows remote unauthenticated attackers to execute system commands as root via a simple HTTP request.

LuaUPnP in Vera Edge Home Controller 1.7.4452 allows remote unauthenticated users to execute arbitrary OS commands via the code parameter to /port_3480/data_request because the "No unsafe lua allowed" code block is skipped.

The web interface in chumby one before 1.0.4 and chumby classic before 1.7.2 allows remote attackers to execute arbitrary commands via shell metacharacters in a request.

An Improper Input Validation vulnerability in Zscaler Client Connector on Linux allows Privilege Escalation. This issue affects Client Connector: before 1.4.0.105

An issue was discovered on D-Link DAP-1650 devices before 1.04B02_J65H Hot Fix. Attackers can execute arbitrary commands.

In NETGEAR Nighthawk X10-R9000 prior to 1.0.4.26, an attacker may execute arbitrary system commands as root by sending a specially-crafted MAC address to the "NETGEAR Genie" SOAP endpoint at AdvancedQoS:GetCurrentBandwidthByMAC. Although this requires QoS being enabled, advanced QoS being enabled, and a valid authentication JWT, additional vulnerabilities (CVE-2019-12510) allow an attacker to interact with the entire SOAP API without authentication. Additionally, DNS rebinding techniques may be used to exploit this vulnerability remotely. Exploiting this vulnerability is somewhat involved. The following limitations apply to the payload and must be overcome for successful exploitation: - No more than 17 characters may be used. - At least one colon must be included to prevent mangling. - A single-quote and meta-character must be used to break out of the existing command. - Parent command remnants after the injection point must be dealt with. - The payload must be in all-caps. Despite these limitations, it is still possible to gain access to an interactive root shell via this vulnerability. Since the web server assigns certain HTTP headers to environment variables with all-caps names, it is possible to insert a payload into one such header and reference the subsequent environment variable in the injection point.

Cisco TelePresence Manager 1.2.x through 1.6.x allows remote attackers to perform unspecified actions and consequently execute arbitrary code via a crafted request to the Java RMI interface, related to a "command injection vulnerability," aka Bug ID CSCtf97085.

Citrix SD-WAN 10.2.x before 10.2.3 and NetScaler SD-WAN 10.0.x before 10.0.8 have Improper Input Validation (issue 1 of 6).

Citrix SD-WAN 10.2.x before 10.2.3 and NetScaler SD-WAN 10.0.x before 10.0.8 have Improper Input Validation (issue 2 of 6).

The QMP migrate command in QEMU version 4.0.0 and earlier is vulnerable to OS command injection, which allows the remote attacker to achieve code execution, denial of service, or information disclosure by sending a crafted QMP command to the listening server. Note: This has been disputed as a non-issue since QEMU's -qmp interface is meant to be used by trusted users. If one is able to access this interface via a tcp socket open to the internet, then it is an insecure configuration issue

Improper error message handling in Zyxel ZyWALL/USG series firmware versions 4.60 through 4.73, VPN series firmware versions 4.60 through 5.35, USG FLEX series firmware versions 4.60 through 5.35, and ATP series firmware versions 4.60 through 5.35, which could allow an unauthenticated attacker to execute some OS commands remotely by sending crafted packets to an affected device.

An issue was discovered in ONAP SDNC before Dublin. By executing sla/upload with a crafted filename parameter, an unauthenticated attacker can execute an arbitrary command. All SDC setups that include admportal are affected.

Zoho ManageEngine ADSelfService Plus through 6102 allows unauthenticated remote code execution in non-English editions.