The Thecus NAS server N8800 with firmware 5.03.01 allows remote attackers to execute arbitrary commands via a get_userid action with shell metacharacters in the username parameter.

A CWE-78 "Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')" was discovered affecting the following devices manufactured by Advantech: EKI-6333AC-2G (<= 1.6.3), EKI-6333AC-2GD (<= v1.6.3) and EKI-6333AC-1GPO (<= v1.2.1). The vulnerability can be exploited by remote unauthenticated users capable of interacting with the default "edgserver" service enabled on the access point and malicious commands are executed with root privileges. No authentication is enabled on the service and the source of the vulnerability resides in processing code associated to the "backup_config_to_utility" operation.

A CWE-78 "Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')" was discovered affecting the following devices manufactured by Advantech: EKI-6333AC-2G (<= 1.6.3), EKI-6333AC-2GD (<= v1.6.3) and EKI-6333AC-1GPO (<= v1.2.1). The vulnerability can be exploited by remote unauthenticated users capable of interacting with the default "edgserver" service enabled on the access point and malicious commands are executed with root privileges. No authentication is enabled on the service and the source of the vulnerability resides in processing code associated to the "wlan_scan" operation.

getresetstatus in dns/views.py and ftp/views.py in CyberPanel (aka Cyber Panel) before 1c0c6cb allows remote attackers to bypass authentication and execute arbitrary commands via /dns/getresetstatus or /ftp/getresetstatus by bypassing secMiddleware (which is only for a POST request) and using shell metacharacters in the statusfile property, as exploited in the wild in October 2024 by PSAUX. Versions through 2.3.6 and (unpatched) 2.3.7 are affected.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

It is found that there is a command injection vulnerability in the setWiFiAdvancedCfg interface in TOTOlink A7100RU (v7.4cu.2313_b20191024) router, which allows an attacker to execute arbitrary commands through a carefully constructed payload.

A CWE-78 "Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')" was discovered affecting the following devices manufactured by Advantech: EKI-6333AC-2G (<= 1.6.3), EKI-6333AC-2GD (<= v1.6.3) and EKI-6333AC-1GPO (<= v1.2.1). The vulnerability can be exploited by remote unauthenticated users capable of interacting with the default "edgserver" service enabled on the access point and malicious commands are executed with root privileges. No authentication is enabled on the service and the source of the vulnerability resides in processing code associated to the "restore_config_from_utility" operation.

In NOKIA 1350 OMS R14.2, multiple OS Command Injection vulnerabilities occurs. This vulnerability allow unauthenticated users to execute commands on the operating system.

A command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow remote attackers to execute arbitrary commands. We have already fixed the vulnerability in the following versions: QTS 5.1.9.2954 build 20241120 and later QTS 5.2.2.2950 build 20241114 and later QuTS hero h5.1.9.2954 build 20241120 and later QuTS hero h5.2.2.2952 build 20241116 and later

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

A CWE-306 "Missing Authentication for Critical Function" was discovered affecting the following devices manufactured by Advantech: EKI-6333AC-2G (<= 1.6.3), EKI-6333AC-2GD (<= v1.6.3) and EKI-6333AC-1GPO (<= v1.2.1). The vulnerability can be exploited by remote unauthenticated users capable of interacting with the default "edgserver" service enabled on the access point.

An OS command injection vulnerability exists in the web interface util_set_serial_mac functionality of Abode Systems, Inc. iota All-In-One Security Kit 6.9X and 6.9Z. A specially-crafted HTTP request can lead to arbitrary command execution. An attacker can send an HTTP request to trigger this vulnerability.

A CWE-78 "Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')" was discovered affecting the following devices manufactured by Advantech: EKI-6333AC-2G (<= 1.6.3), EKI-6333AC-2GD (<= v1.6.3) and EKI-6333AC-1GPO (<= v1.2.1). The vulnerability can be exploited by remote unauthenticated users capable of interacting with the default "edgserver" service enabled on the access point and malicious commands are executed with root privileges. No authentication is enabled on the service and the source of the vulnerability resides in processing code associated to the "cfg_cmd_set_eth_conf" operation.

IBM Security Verify Access Appliance 10.0.0 through 10.0.8 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

Network Vision IntraVue before 2.3.0a14 on Windows allows remote attackers to execute arbitrary OS commands via unspecified vectors.

Dell Unity, version(s) 5.4 and prior, contain(s) an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Command execution.

An OS command injection vulnerability has been reported to affect several product versions. If exploited, the vulnerability could allow remote attackers to execute commands. We have already fixed the vulnerability in the following version: QuRouter 2.4.3.103 and later

An OS command injection vulnerability exists in the m2m DELETE_FILE cmd functionality of Siretta QUARTZ-GOLD G5.0.1.5-210720-141020. A specially-crafted network request can lead to arbitrary command execution. An attacker can send a network request to trigger this vulnerability.

Multiple vulnerabilities in the web-based management interface of Cisco HyperFlex HX could allow an unauthenticated, remote attacker to perform command injection attacks against an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A command injection vulnerability has been reported to affect License Center. If exploited, the vulnerability could allow remote attackers to execute arbitrary commands. We have already fixed the vulnerability in the following version: License Center 1.9.43 and later

CyberPanel (aka Cyber Panel) before 2.3.5 allows Command Injection via completePath in the ProcessUtilities.outputExecutioner() sink. There is /filemanager/upload (aka File Manager upload) unauthenticated remote code execution via shell metacharacters.

Multiple vulnerabilities exist in the web-based management interface of Cisco Small Business RV Series Routers. A remote attacker could execute arbitrary commands or bypass authentication and upload files on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability was found in D-Link DAR-7000-40 V31R02B1413C and classified as critical. This issue affects some unknown processing of the file /useratte/resmanage.php. The manipulation of the argument load leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-264533 was assigned to this vulnerability. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.

Azure CLI is the command-line interface for Microsoft Azure. In versions previous to 2.40.0, Azure CLI contains a vulnerability for potential code injection. Critical scenarios are where a hosting machine runs an Azure CLI command where parameter values have been provided by an external source. The vulnerability is only applicable when the Azure CLI command is run on a Windows machine and with any version of PowerShell and when the parameter value contains the `&` or `|` symbols. If any of these prerequisites are not met, this vulnerability is not applicable. Users should upgrade to version 2.40.0 or greater to receive a a mitigation for the vulnerability.

Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in Apache Airflow Pig Provider, Apache Airflow allows an attacker to control commands executed in the task execution context, without write access to DAG files. This issue affects Pig Provider versions prior to 4.0.0. It also impacts any Apache Airflow versions prior to 2.3.0 in case Pig Provider is installed (Pig Provider 4.0.0 can only be installed for Airflow 2.3.0+). Note that you need to manually install the Pig Provider version 4.0.0 in order to get rid of the vulnerability on top of Airflow 2.3.0+ version.

An issue was discovered in Aviatrix Controller before 7.1.4191 and 7.2.x before 7.2.4996. Due to the improper neutralization of special elements used in an OS command, an unauthenticated attacker is able to execute arbitrary code. Shell metacharacters can be sent to /v1/api in cloud_type for list_flightpath_destination_instances, or src_cloud_type for flightpath_connection_test.

A command injection vulnerability has been reported to affect QHora. If exploited, the vulnerability could allow remote attackers to execute arbitrary commands. We have already fixed the vulnerability in the following version: QuRouter 2.4.5.032 and later

An OS command injection vulnerability has been reported to affect HBS 3 Hybrid Backup Sync. If exploited, the vulnerability could allow remote attackers to execute commands. We have already fixed the vulnerability in the following version: HBS 3 Hybrid Backup Sync 25.1.1.673 and later

A vulnerability, which was classified as critical, has been found in Ruijie RG-UAC up to 20240506. Affected by this issue is some unknown functionality of the file /view/bugSolve/viewData/detail.php. The manipulation of the argument filename leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-263936. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A CWE-78 "Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')" was discovered affecting the following devices manufactured by Advantech: EKI-6333AC-2G (<= 1.6.3), EKI-6333AC-2GD (<= v1.6.3) and EKI-6333AC-1GPO (<= v1.2.1). The vulnerability can be exploited by remote unauthenticated users capable of interacting with the default "edgserver" service enabled on the access point and malicious commands are executed with root privileges. No authentication is enabled on the service and the source of the vulnerability resides in processing code associated to the "capture_packages" operation.

The VBWinExec function in Node\AspVBObj.dll in Advantech WebAccess 8.3.0 allows remote attackers to execute arbitrary OS commands via a single argument (aka the command parameter).

A vulnerability classified as critical was found in Ruijie RG-UAC up to 20240506. Affected by this vulnerability is an unknown functionality of the file /view/networkConfig/RouteConfig/StaticRoute/static_route_edit_commit.php. The manipulation of the argument oldipmask/oldgateway leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-263935. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

In TOTOLINK T6 V4.1.5cu.709_B20210518, there is an execute arbitrary command in cstecgi.cgi.

In WhatsUp Gold versions released before 2023.1.3, a Remote Code Execution issue exists in Progress WhatsUp Gold. This vulnerability allows an unauthenticated attacker to achieve the RCE as a service account through NmApi.exe.

TOTOLINK T6 V4.1.5cu.709_B20210518 is vulnerable to command injection via cstecgi.cgi

Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in Apache Airflow Pinot Provider, Apache Airflow allows an attacker to control commands executed in the task execution context, without write access to DAG files. This issue affects Apache Airflow Pinot Provider versions prior to 4.0.0. It also impacts any Apache Airflow versions prior to 2.3.0 in case Apache Airflow Pinot Provider is installed (Apache Airflow Pinot Provider 4.0.0 can only be installed for Airflow 2.3.0+). Note that you need to manually install the Pinot Provider version 4.0.0 in order to get rid of the vulnerability on top of Airflow 2.3.0+ version.

GNOME OCRFeeder before 0.8.4 allows OS command injection via shell metacharacters in a PDF or image filename.

Tenda AC1206 V15.03.06.23 was discovered to contain a command injection vulnerability via the mac parameter in the function formWriteFacMac.

Logicytics is designed to harvest and collect data for forensic analysis. Logicytics has a basic vuln affecting compromised devices from shell injections. This vulnerability is fixed in 2.3.2.

cgi-bin/mft/wireless_mft.cgi in AirLive BU-2015 with firmware 1.03.18 16.06.2014, AirLive BU-3026 with firmware 1.43 21.08.2014, AirLive MD-3025 with firmware 1.81 21.08.2014, AirLive WL-2000CAM with firmware LM.1.6.18 14.10.2011, and AirLive POE-200CAM v2 with firmware LM.1.6.17.01 uses hard-coded credentials in the embedded Boa web server, which allows remote attackers to obtain user credentials via crafted HTTP requests.

Certain models of D-Link wireless routers do not properly validate user input in the telnet service, allowing unauthenticated remote attackers to use hard-coded credentials to log into telnet and inject arbitrary OS commands, which can then be executed on the device.

In PHP versions 8.1.* before 8.1.29, 8.2.* before 8.2.20, 8.3.* before 8.3.8, when using Apache and PHP-CGI on Windows, if the system is set up to use certain code pages, Windows may use "Best-Fit" behavior to replace characters in command line given to Win32 API functions. PHP CGI module may misinterpret those characters as PHP options, which may allow a malicious user to pass options to PHP binary being run, and thus reveal the source code of scripts, run arbitrary PHP code on the server, etc.

Tenda G3 Router firmware v15.03.05.05 was discovered to contain a remote code execution (RCE) vulnerability via the usbPartitionName parameter in the formSetUSBPartitionUmount function.

There is a command injection vulnerability that may allow an attacker to inject malicious input on the device's operating system.

TOTOLink A700RU V7.4cu.2313_B20191024 was discovered to contain a command injection vulnerability via the lang parameter in the function cstesystem. This vulnerability allows attackers to execute arbitrary commands via a crafted payload.

D-Link DIR-846W A1 FW100A43 was discovered to contain a remote command execution (RCE) vulnerability via the lan(0)_dhcps_staticlist parameter. This vulnerability is exploited via a crafted POST request.

Multiple vulnerabilities in the web-based management interface of Cisco HyperFlex HX could allow an unauthenticated, remote attacker to perform command injection attacks against an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

The package Snyk CLI before 1.1294.0 is vulnerable to Code Injection when scanning an untrusted PHP project. The vulnerability can be triggered if Snyk test is run inside the untrusted project due to the improper handling of the current working directory name. Snyk recommends only scanning trusted projects.

Elsight – CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')