In Legion of the Bouncy Castle BC before 1.61 and BC-FJA before 1.0.1.2, attackers can obtain sensitive information about a private exponent because of Observable Differences in Behavior to Error Inputs. This occurs in org.bouncycastle.crypto.encodings.OAEPEncoding. Sending invalid ciphertext that decrypts to a short payload in the OAEP Decoder could result in the throwing of an early exception, potentially leaking some information about the private exponent of the RSA private key performing the encryption.

AIX 4.3.3 through AIX 5.1, when direct remote login is disabled, displays a different message if the password is correct, which allows remote attackers to guess the password via brute force methods.

An issue was discovered on LG mobile devices with Android OS 4.4, 5.0, 5.1, 6.0, 7.0, 7.1, 8.0, 8.1, 9.0, and 10 software. Key logging may occur because of an obsolete API. The LG ID is LVE-SMP-170010 (August 2020).

Pritunl 1.29.2145.25 allows attackers to enumerate valid VPN usernames via a series of /auth/session login attempts. Initially, the server will return error 401. However, if the username is valid, then after 20 login attempts, the server will start responding with error 400. Invalid usernames will receive error 401 indefinitely. Note: This has been disputed by the vendor as not a vulnerability. They argue that this is an intended design

Citrix ShareFile before 19.12 allows User Enumeration. It is possible to enumerate application username based on different server responses using the request to check the otp code. No authentication is required.

In BIG-IP 15.0.0, 14.1.0-14.1.0.6, 14.0.0-14.0.0.5, 13.0.0-13.1.1.5, 12.1.0-12.1.4.1, 11.5.1-11.6.4, BIG-IQ 7.0.0, 6.0.0-6.1.0,5.2.0-5.4.0, iWorkflow 2.3.0, and Enterprise Manager 3.1.1, the Configuration utility login page may not follow best security practices when handling a malicious request.

RSA BSAFE Crypto-C Micro Edition versions prior to 4.1.4 and RSA Micro Edition Suite versions prior to 4.4 are vulnerable to an Information Exposure Through Timing Discrepancy. A malicious remote user could potentially exploit this vulnerability to extract information leaving data at risk of exposure.

RSA BSAFE Crypto-C Micro Edition, versions prior to 4.0.5.3 (in 4.0.x) and versions prior to 4.1.3.3 (in 4.1.x), and RSA Micro Edition Suite, versions prior to 4.0.11 (in 4.0.x) versions prior to 4.1.6.1 (in 4.1.x) and versions prior to 4.3.3 (4.2.x and 4.3.x) are vulnerable to an Information Exposure Through Timing Discrepancy. A malicious remote user could potentially exploit this vulnerability to extract information leaving data at risk of exposure.

In Bromite through 78.0.3904.130, there are adblock rules in the release APK; therefore, probing which resources are blocked and which aren't can identify the application version and defeat the User-Agent protection mechanism.

The Change WP Admin Login WordPress plugin before 1.1.4 discloses the URL of the hidden login page when accessing a crafted URL, bypassing the protection offered.

User enumeration is found in in PHPJabbers Appointment Scheduler 3.0. This issue occurs during password recovery, where a difference in messages could allow an attacker to determine if the user is valid or not, enabling a brute force attack with valid users.

_account_forgot_password.ajax.php in MFScripts YetiShare 3.5.2 through 4.5.3 takes a different amount of time to return depending on whether an email address is configured for the account name provided. This can be used by an attacker to enumerate accounts by guessing email addresses.

An issue was discovered in Symfony 4.2.0 to 4.2.11 and 4.3.0 to 4.3.7. The ability to enumerate users was possible due to different handling depending on whether the user existed when making unauthorized attempts to use the switch users functionality. This is related to symfony/security.

TrevorC2 v1.1/v1.2 fails to prevent fingerprinting primarily via a discrepancy between response headers when responding to different HTTP methods, also via predictible responses when accessing and interacting with the "SITE_PATH_QUERY".

A vulnerability classified as problematic has been found in Rotem Dynamics Rotem CRM up to 20230729. This affects an unknown part of the file /LandingPages/api/otp/send?id=[ID][ampersand]method=sms of the component OTP URI Interface. The manipulation leads to information exposure through discrepancy. It is possible to initiate the attack remotely. The identifier VDB-233253 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

The Reset Password feature in Pagekit 1.0.17 gives a different response depending on whether the e-mail address of a valid user account is entered, which might make it easier for attackers to enumerate accounts.

Macrovideo v380pro v1.4.97 shares the device id and password when sharing the device.

An issue was discovered in ConnectWise Control (formerly known as ScreenConnect) 19.3.25270.7185. There is a user enumeration vulnerability, allowing an unauthenticated attacker to determine with certainty if an account exists for a given username.

SPIP before 3.1.11 and 3.2 before 3.2.5 provides different error messages from the password-reminder page depending on whether an e-mail address exists, which might help attackers to enumerate subscribers.

IBM GSKit-Crypto could allow a remote attacker to obtain sensitive information, caused by a timing-based side channel in the RSA Decryption implementation. By sending an overly large number of trial messages for decryption, an attacker could exploit this vulnerability to obtain sensitive information.

IBM GSKit could allow a remote attacker to obtain sensitive information, caused by a timing-based side channel in the RSA Decryption implementation. By sending an overly large number of trial messages for decryption, an attacker could exploit this vulnerability to obtain sensitive information. IBM X-Force ID: 255828.

An unauthenticated remote attacker can gain access to sensitive information including authentication information when using CODESYS OPC UA Server with the non-default Basic128Rsa15 security policy.

On Coldcard MK1 and MK2 devices, a side channel for the row-based OLED display was found. The power consumption of each row-based display cycle depends on the number of illuminated pixels, allowing a partial recovery of display contents. For example, a hardware implant in the USB cable might be able to leverage this behavior to recover confidential secrets such as the PIN and BIP39 mnemonic. In other words, the side channel is relevant only if the attacker has enough control over the device's USB connection to make power-consumption measurements at a time when secret data is displayed. The side channel is not relevant in other circumstances, such as a stolen device that is not currently displaying secret data. On Coldcard MK1 and MK2 devices, a side channel for the row-based OLED display was found. The power consumption of each row-based display cycle depends on the number of illuminated pixels, allowing a partial recovery of display contents. For example, a hardware implant in the USB cable might be able to leverage this behavior to recover confidential secrets such as the PIN and BIP39 mnemonic. In other words, the side channel is relevant only if the attacker has enough control over the device's USB connection to make power-consumption measurements at a time when secret data is displayed. The side channel is not relevant in other circumstances, such as a stolen device that is not currently displaying secret data. NOTE: At Coinkite, we’ve already mitigated it, even though we feel strongly that it is not a legitimate issue. In our opinion, it is both unproven (might not even work) and also completely impractical—even if it could be made to work perfectly

In CentOS-WebPanel.com (aka CWP) CentOS Web Panel 0.9.8.846, the Login process allows attackers to check whether a username is valid by reading the HTTP response.

HumHub Social Network Kit Enterprise v1.3.13 allows remote attackers to find the user accounts existing on any Social Network Kits (including self-hosted ones) by brute-forcing the username after the /u/ initial URI substring, aka Response Discrepancy Information Exposure.

Dropbear 2011.54 through 2018.76 has an inconsistent failure delay that may lead to revealing valid usernames, a different issue than CVE-2018-15599.

An access control issue in the component /juis_boxinfo.xml of AVM FRITZ!Box 7530 AX v7.59 allows attackers to obtain sensitive information without authentication. NOTE: this is disputed by the Supplier because it cannot be reproduced, and the issue report focuses on an unintended configuration with direct Internet exposure.

An Information Exposure issue (issue 2 of 2) was discovered in GitLab Community and Enterprise Edition before 11.7.8, 11.8.x before 11.8.4, and 11.9.x before 11.9.2. During the OAuth authentication process, the application attempts to validate a parameter in an insecure way, potentially exposing data.

Computrols CBAS 18.0.0 allows Username Enumeration.

Zabbix through 4.4.0alpha1 allows User Enumeration. With login requests, it is possible to enumerate application usernames based on the variability of server responses (e.g., the "Login name or password is incorrect" and "No permissions for system access" messages, or just blocking for a number of seconds). This affects both api_jsonrpc.php and index.php.

An issue in Sourcebans++ before v.1.8.0 allows a remote attacker to obtain sensitive information via a crafted XAJAX call to the Forgot Password function.

Draytek devices Vigor 165/166 prior to v4.2.6 , Vigor 2620/LTE200 prior to v3.9.8.8, Vigor 2860/2925 prior to v3.9.7, Vigor 2862/2926 prior to v3.9.9.4, Vigor 2133/2762/2832 prior to v3.9.8, Vigor 2135/2765/2766 prior to v4.4.5.1, Vigor 2865/2866/2927 prior to v4.4.5.3, Vigor 2962/3910 prior to v4.3.2.7, Vigor 3912 prior to v4.3.5.2, and Vigor 2925 up to v3.9.6 were discovered to utilize insecure versions of the functions strcmp and memcmp, allowing attackers to possibly obtain sensitive information via timing attacks.

An issue was discovered in Ujcms v6.0.2 allows attackers to gain sensitive information via the dir parameter to /api/backend/core/web-file-html/download-zip.

In NocoDB, versions 0.9 to 0.83.8 are vulnerable to Observable Discrepancy in the password-reset feature. When requesting a password reset for a given email address, the application displays an error message when the email isn't registered within the system. This allows attackers to enumerate the registered users' email addresses.

A vulnerability in Cisco Unified Communications Manager (Unified CM), Cisco Unified Communications Manager Session Management Edition (Unified CM SME), and Cisco Unity Connection could allow an unauthenticated, remote attacker to perform a timing attack. This vulnerability is due to insufficient protection of a system password. An attacker could exploit this vulnerability by observing the time it takes the system to respond to various queries. A successful exploit could allow the attacker to determine a sensitive system password.

CA Technologies Identity Governance 12.6, 14.0, 14.1, and 14.2 and CA Identity Suite Virtual Appliance 14.0, 14.1, and 14.2 provide telling error messages that may allow remote attackers to enumerate account names.

The password-reset form in ServiceNow Orlando provides different responses to invalid authentication attempts depending on whether the username exists.

mailboxd in Zimbra Collaboration Suite 8.8 before 8.8.8; 8.7 before 8.7.11.Patch3; and 8.6 allows Account Enumeration by leveraging a Discrepancy between the "HTTP 404 - account is not active" and "HTTP 401 - must authenticate" errors.

In Cibele Thinfinity VirtualUI before 3.0, /changePassword returns different responses for invalid authentication requests depending on whether the username exists.

A user enumeration vulnerability in MELAG FTP Server 2.2.0.4 allows an attacker to identify valid FTP usernames.

WatchGuard Fireware allows user enumeration, e.g., in the Firebox XML-RPC login handler. A login request that contains a blank password sent to the XML-RPC agent in Fireware v11.12.1 and earlier returns different responses for valid and invalid usernames. An attacker could exploit this vulnerability to enumerate valid usernames on an affected Firebox.

Libgcrypt before 1.8.8 and 1.9.x before 1.9.3 mishandles ElGamal encryption because it lacks exponent blinding to address a side-channel attack against mpi_powm, and the window size is not chosen appropriately. This, for example, affects use of ElGamal in OpenPGP.

IBM Security Identity Manager 7.0.2 could allow a remote user to enumerate usernames due to a difference of responses from valid and invalid login attempts. IBM X-Force ID: 200018

In Directus 8.x through 8.8.1, an attacker can discover whether a user is present in the database through the password reset feature. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

Dalmark Systems Systeam 2.22.8 build 1724 is vulnerable to User enumeration. The Systeam application is an ERP system that uses a mixed architecture based on SaaS tenant and user management, and on-premise database and web application counterparts. This issue occurs during the identification of the correct tenant for a given user, where a difference in messages could allow an attacker to determine if the given user is valid or not, enabling a brute force attack with valid users.

Crypto++ (aka Cryptopp) 8.6.0 and earlier contains a timing leakage in MakePublicKey(). There is a clear correlation between execution time and private key length, which may cause disclosure of the length information of the private key. This might allow attackers to conduct timing attacks. NOTE: this report is disputed by the vendor and multiple third parties. The execution-time differences are intentional. A user may make a choice of a longer key as a tradeoff between strength and performance. In making this choice, the amount of information leaked to an adversary is of infinitesimal value

Combodo iTop is a simple, web based IT Service Management tool. Unauthenticated user can perform users enumeration, which can make it easier to bruteforce a valid account. As a fix the sentence displayed after resetting password no longer shows if the user exists or not. This fix is included in versions 2.7.11, 3.0.5, 3.1.2, and 3.2.0. Users are advised to upgrade. Users unable to upgrade may overload the dictionary entry `"UI:ResetPwd-Error-WrongLogin"` through an extension and replace it with a generic message.

The MediaError message property should be consistent to avoid leaking information about cross-origin resources; however for a same-site cross-origin resource, the message could have leaked information enabling XS-Leaks attacks. This vulnerability affects Firefox < 102.

A timing attack vulnerability exists in the gaizhenbiao/chuanhuchatgpt repository, specifically within the password comparison logic. The vulnerability is present in version 20240310 of the software, where passwords are compared using the '=' operator in Python. This method of comparison allows an attacker to guess passwords based on the timing of each character's comparison. The issue arises from the code segment that checks a password for a particular username, which can lead to the exposure of sensitive information to an unauthorized actor. An attacker exploiting this vulnerability could potentially guess user passwords, compromising the security of the system.

CyberArk Identity 21.5.131, when handling an invalid authentication attempt, sometimes reveals whether the username is valid. In certain authentication policy configurations with MFA, the API response length can be used to differentiate between a valid user and an invalid one (aka Username Enumeration). Response differentiation enables attackers to enumerate usernames of valid application users. Attackers can use this information to leverage brute-force and dictionary attacks in order to discover valid account information such as passwords.